iPhone 7 replacement power connector. iPhone charging connector (Lightning) does not work

The charging connector can be called the weakest link in a smartphone; the part becomes so vulnerable due to its frequent use. If it breaks down, you will need to replace the iPhone 7 charging connector. A faulty connector not only makes it impossible to use the iPhone, it can cause damage to neighboring parts located in the immediate vicinity of the charging cable, microphone, and headphones.

What are the signs of a malfunction when replacing the iPhone 7 charging connector?

Unfortunately, active use of the iPhone 7 leads to the fact that the charging connector may break after five or six months of using the gadget. This is evidenced by inexorable statistics. It is necessary to repair it immediately after detecting a breakdown at a service center, rather than attempting to disassemble the complex design of the gadget yourself.

The causes of the malfunction will be determined after professional diagnostics.

The iPhone 7 indicates that parts have failed and that the iPhone 7 Plus charging connector needs to be replaced by a number of the following signs:

The iPhone screen does not show the start of charging when the charger is connected to a power source.
Incorrect operation of the microphone due to its proximity to the connector. In this case, problems with the lower charging loop are assumed.
The battery does not charge when the smartphone is turned off.
Plugging in the sync cord does not show the lightning bolt icon on the display to indicate charging is in progress. The screen displays a fork icon.
Mechanical damage to the connector, diagnosed visually.

Such symptoms are a reason to immediately contact a service center. The cost of replacement is much less than the cost of damage caused when trying to eliminate the defect on your own.

What causes the need to replace the iPhone 7 Plus charging connector?

The inability to use your favorite gadget throws every smartphone owner out of their usual rut. The reasons for refusal to charge are:

Intensity of connector usage. We are used to using a smartphone to the limit of its capabilities, playing games, listening to music, connecting to a computer, and surfing the Internet for hours. Such activity leads to the fact that the device has to be charged several times a day, which leads to natural wear and tear on the charging connector.
Mechanical damage. Breakdown often occurs when trying to insert a deformed or non-original charger plug into the connector.
Moisture ingress. Accidental entry of moisture into the connector hole leads to oxidation of metal parts. The process of corrosion begins, spreading to adjacent components of the device.
Pollution with dust and dirt. Small particles of debris reduce the sensitivity of the elements, they clog the connector, and as a result, the iPhone stops responding to the charger.
System failure. Occurs when using a non-original charger that does not meet the rating.
Factory defect.

It is almost impossible to insure your gadget against manufacturing defects and natural wear and tear.

But problems with the connector can be prevented by taking the following measures:

do not use non-original chargers;
carefully remove the plug;
try to prevent liquids from getting into the charging socket;
buy a beautiful case for your favorite smartphone.

If a breakdown does occur, do not try to start disassembling the device without sufficient experience and knowledge. Repairing and replacing the iPhone 7 Plus charging connector involves many sequential steps; violation of their order and carelessness will lead to the loss of an expensive device.

After conducting diagnostics at our Delanko service center, competent specialists will quickly and with a guarantee return your iPhone to active life.

Repair of iPhone - stylish high-status smartphones produced by Apple - is most often required due to careless operation. After all, the high quality of manufacturing of Apple gadgets is beyond doubt. A common service of our service center is replacing iPhone charging connector. The malfunction of this critical part is detected when the user discovers that he cannot charge the smartphone from the network or connect it to the computer. The reason for this is the failure of the input connectors or the charging connector itself.

Our service center specialists can resolve this problem. Urgent possible, including at your home. You can order at any time convenient for you. All residents of Moscow and the Moscow region have this opportunity. Before starting the repair, the technician will determine whether the iPhone charging connector needs to be replaced or whether there is another reason why your gadget has stopped charging. After the iPhone returns to working order, the customer receives warranty card, confirming the quality of services provided. You will be satisfied with our service.

When is it necessary to replace the charging connector on an iPhone?

Without exception, all iPhones need to be charged regularly. The frequency of recharging depends on the intensity of use of the gadget. No increase in charge percentage when connecting the charger, may indicate an unfortunate failure of the connector. For further operation of the smartphone, it must be replaced. Our service center, which has a 24-hour work schedule, offers prompt implementation. Replacing the iPhone charging connector is considered an urgent service that allows you to quickly restore the functionality of the gadget and return the user to its normal operation. The following may additionally indicate a malfunction of this part:

external damage to the connector;
deformation of the device body;
microphone malfunctions;
lack of information about battery charge when the charger is connected;
The display shows a plug instead of a lightning bolt when connecting the sync cord.

If these malfunctions are detected, you will need urgent replacement of the charging connector on iPhone. Otherwise, the operation of your gadget after the battery is completely discharged will be impossible.

Reasons for iPhone charging connector failure

It is extremely rare that an iPhone charging connector needs to be replaced due to natural wear and tear. Most often, failure of this part results from:

heavy pollution, typical for carrying a smartphone in the general compartment of a bag or in a pocket without a protective case;
hit inside the device moisture;
independent attempts to clean the connector with a needle or any other thin metal object without turning off the device and disconnecting the battery;
use of low-quality chargers;
abuse of iPhone charging in the car.

All of the above leads to the fact that The charging connector may oxidize or burn out. When diagnosing faults, broken charger input connectors are often discovered. Regardless of the type of damage, complete Replacing iPhone charging connector cable e. You need to entrust this work to a specialist from our service center, who will perform it efficiently, professionally and in record time: for 10-30 minutes.

Replacing the iPhone charging connector with a technician visiting your home

As mentioned above, discover charging connector failure possible by connecting a charger to your smartphone. We usually do this when the battery is almost completely discharged. If you don’t charge it immediately, it’s not a fact that the iPhone will “survive” until the morning. And even if it does not turn off on its own, its operation will be impossible due to low battery charge. A popular service from our service center will help out in this situation - on-site replacement of iPhone charging connector. It has a number of advantages, which are as follows:

immediate return of iPhone to functionality;
fast and high-quality execution of repair work;
special convenience and comfort for the customer;
identification and prompt elimination of anything that could lead to malfunctions of the Apple gadget;
replacement of worn-out iPhone parts with new original ones or their cheaper analogues.

Replacing the iPhone charging connector on the road is no different from a similar service performed in a service workshop. You don't even have to part with your smartphone. Repair work is carried out in your presence. Moreover, they do not take much time from an experienced specialist.

How to replace the iPhone charging connector?

We will not go into the technical details of how How to replace the charging connector on an iPhone. And all because the manufacturer of Apple gadgets strongly discourages doing this yourself. The fact is that the iPhone has a perfect internal structure. Every detail has its place in it. The first problems for an amateur will arise when trying to disassemble the device. After all, in order to separate the touch display from the aluminum case you will need a special tool. Otherwise, damage is inevitable. Therefore, we will tell you what the essence of providing this service is:

primary diagnostics of faults in order to identify all hardware failures and software errors;
disassembling the device, which involves separating the display from the body and sequentially removing parts and cables that block access to the part in need of replacement;
replacing the iPhone charging connector with a new one, either original or a budget analogue;
reassembly of the device;
post-repair diagnostics of faults to confirm the normal operation of the iPhone;
issuance of a guarantee for work performed.

The advantages of contacting our service center are obvious. These include 24/7 work schedule, and provision of repair services for Apple gadgets on the road, and a large assortment of replacement parts, and affordable, and high professionalism of all the specialists working with us.

Replacing the iPhone charging connector

In two versions of the “seven”, the system connector and the headphone port are combined into one “Lightning” interface. Such reinforced equipment results in a double load on the socket. In such situations, frequent power failures occur, which leads smartphone users to service centers to replace the iPhone 7 charging connector. If you have a similar situation, then you should contact us!

The Pedant service center has been providing high-quality repairs of Apple equipment of any complexity for more than 5 years. Our technicians restore more than 500 smartphones every day. The company makes wholesale purchases of “Original” class parts and you don’t have to wait for the right part for several days - in our warehouses the stocks of necessary spare parts are updated weekly and distributed by region.

We will replace the bottom cable of iPhone 7 at a competitive price

Thanks to wholesale purchasing, we can set affordable prices for our customers. The company's policy is aimed at a loyal attitude towards our users. Therefore, the service center technicians will replace the lower cable of your iPhone 7 for you at an affordable price with a subsequent guarantee.

The biggest surprise was the refusal of the iPhone 7 to have a separate 3.5 mm jack for listening to music. Starting with this model, the charging connector becomes universal, combining not only the main charging function, but also an additional one. Now, power supply and listening to media content are carried out through one connector - Lightning.

Many, at first, did not understand why the company did this, although the decision, in practice, has a number of positive aspects. Due to the freed up space inside the device, it became possible to place another camera on the rear panel. The overall functioning of the iPhone has also improved, and it has also been possible to provide the case with absolute moisture and dust resistance that meets the IP67 standard.

Replacement of the lower cable - Main reasons.

Situations when the iPhone 7 does not charge and the charger needs to be replaced are extremely rare. Among the main provoking factors for visiting a service center, it is worth highlighting the following:

- Intensive use of charging;

- Mechanical damage;

- Using non-original chargers;

- Contact with moisture for a minute or more, causing oxidation and corrosion of components;

- iPhone charging socket is dirty;

- System failures.

How will the iPhone 7 charging connector be replaced in the SC?

- Come to the service at one of three addresses and tell us in detail about the problem or call a specialist to your home for free.

- First, a complete computer diagnostic is carried out to identify all breakdowns and their causes.

- We memorize the faults found, the time it will take to restore the smartphone’s functionality and the final price, which already includes original spare parts and labor.

- The lower cable of the iPhone 7 is being replaced and fully tested.

- We notify you of readiness and coordinate the transfer of the gadget.

- Pay for repairs. We issue a smartphone, a 3-month warranty and a 7% club discount card.

*To receive a discount now, fill out the form on the website.

It is worth understanding that attempting to replace it yourself is extremely contraindicated; you can cause serious damage to your smartphone. Proper replacement of the iPhone 7 bottom cable should be performed exclusively by professionals. The price for services is fixed and quite reasonable, and the quality of the repair guarantees long-term and trouble-free use of the iPhone 7.

Apple devices quite often end up in a service center due to the phone’s charger not working properly. There can be many reasons for the failure of such a plan. It could be the charger, the battery, or the charger connector. But repairing such a fault is necessary only with the appropriate equipment and skills.

Reasons why the charging connector (Lightning) of the iPhone (iPhone) does not work

Failure of the charger connector to work can occur for many reasons and is of a purely individual nature. Among the most common:

Mechanical impact on the body or individual elements of the phone. Quite often, smartphones are subjected to shocks or falls, which negatively affect the performance of the device. As a result of such damage, the cables may become disconnected or the motherboard may be damaged. Also, quite often, a break in the charger cord is confused with a malfunction of the Lightning connector, which can also occur if the iPhone is dropped during the battery charging process.
Moisture gets on the case and penetrates inside the smartphone. As is known, when a metal interacts with water, oxidation occurs. Oxidative processes, when they appear on the contacts of a cable or microchip, can lead to a short circuit and damage to the charger connector.
Physical impacts on the iPhone that do not depend on the owner. Such reasons include sudden changes in voltage in the network, changes in temperature. It's no secret that power surges in our country are quite common. Such surges can cause irreparable damage to your iPhone - from failure of soldering on the board to burnout of entire system units, individual elements and microcircuits. If the phone has been subjected to sudden voltage changes, then sometimes even replacing the charging connector may not solve the problem.
Natural wear and tear of the battery. Many people may think that the battery failure does not relate to the charger connector, but this is not the case. If the battery is very worn, charging may not occur when the charger is connected. The owner immediately blames the connector, but the reason is that the battery life is completely exhausted.

Accordingly, in order to establish the reason for the phone’s failure to charge, it is necessary to diagnose faults. For self-diagnosis, you can use the following methods:

Connect another charger to rule out a defect in the adapter. If the working charger also refuses to charge the iPhone, then the problem is in the phone itself.
Try synchronizing your smartphone with your personal computer. If, when connecting to iTunes, your computer gives an error or there is no connection at all via USB, then the problem is almost certainly in the device’s charging connector.
Visual inspection. Quite often, the phone refuses to work with the charger due to a simple clogged connector. Therefore, it is necessary to carefully inspect the charging socket. Most iPhone owners carry them in their pocket, given the relative vulnerability of the connector, the likelihood of foreign bodies getting in is quite high.

Repair methods when the iPhone charging connector (Lightning) does not work

The only way to independently repair the probable cause of a faulty charger socket is to clean it. The connector can only be cleaned using non-metallic tools. In everyday life, the most suitable tool is a wooden toothpick. But the most competent solution would be to contact a service center.

Charger connector repair with the companyApple— Sapphire

If preliminary diagnostics of the device indicate a breakdown of the adapter socket or did not help determine the reason for the failure of the phone to work with the charger, then feel free to contact the Apple-Sapphire service center. Our repair technicians will perform a full diagnostic test, test your device, and, if necessary, replace the charger connector.