Router page address. Remote access to the router via the Internet

They do not require regular intervention in their work. As a rule, it is enough to set them up once and after that they can work for as long as desired. But sometimes situations arise when it is necessary to urgently make changes to the router settings, for example, in order to change the WiFi password. In such a situation, the question arises of how to open the router settings. In this article we will talk about how to quickly and easily access your router settings.

A username and password are required to protect the router from changing settings by third parties. The standard login and password are indicated on the router box or in its instructions.

If you don't know which username and password to use, you can try the following options:

These login and password combinations are often used by router manufacturers as standard. As a last resort, if you cannot remember your login and password to access your browser settings, you can:

A router is a convenient solution for building local and wireless network, allowing you to simultaneously access the Internet from several devices. However, to configure the router, you first need to install it correctly and go to the web interface, where the basic parameters of the equipment are indicated.

Connecting equipment

Before you go into the router settings, you need to install the equipment correctly. You will need:

Router.
Network cable.
Network card on a computer.

Any user can handle installing a router - the main thing is to carefully inspect the ports and figure out what they are needed for. Explanatory inscriptions and different colors of connectors will help with this.

The cable that the provider brought into the room is inserted into the WAN/Line/Internet port (usually it blue).
Install in one of the LAN ports (mostly yellow) network cable, which comes with the router. The second end of the patch cord is connected to network card computer.
The power cable is installed in the appropriate connector.

Once all the wires are in place, press the power button. If everything is done correctly, several indicators on the router will light up: power, network connection and connection to the computer.

Setting up a router in the system

To open the router interface, you need to configure a network connection. Usually the necessary parameters are set automatically, but it would be a good idea to check that they are correct.

These are standard settings that allow the router, using a DHCP server, to independently give an address to the connected device (computer in in this case).

Login to the interface

After connecting and configuring the equipment, you can proceed to resolving the issue of how to log into the router. On almost all routers, the interface address, login and password are indicated on a label located on the bottom of the device.

If there is no sticker, then you can see the address for displaying the router’s web interface in the browser using software tools:

Open Network and Sharing Center.
Proceed to change adapter settings.
Double-click the Local Area Connection icon.
Click Details and look at the Default Gateway value.

If you changed your login and password yourself, but cannot remember the new values, then use Reset button on the router to reset it to factory settings. After resetting the settings, the identification data will become standard - admin/admin.

It is not necessary to look at the router address. Most manufacturers use the same address, so the order in which the routers interface starts is different models not much different.

For example, TP-Link and D-Link routers use the IP address 192.168.0.1. After entering this value, an authorization window appears in the address bar of the browser; you need to enter your login and password in it. For some models D-Link routers Dir only needs to indicate the login; the password line can be left empty.

Asus and Netgear routers have the default address 192.168.1.1. The login and password are also usually standard – admin/admin. But there may be options: for example, for the NETGEAR WGR614 router the login will be “admin” and the password will be “password”.

For routers Huawei data for entry are slightly different from the usual values. The address to enter the interface is 192.168.100.1. The login and password are also not quite standard - root and admin, respectively. Some models have even more complex pairs for authorization.

Routers Zyxel Keenetic have an easy to remember address my.keenetic.net. Alternatively it is used standard address 192.168.1.1. The login will be the word “admin”, and the password will be standard settings – 1234.

It seems like you can get confused, but in reality everything is simple. In 90% of cases the address will be 192.168.0.1. or 192.168.1.1, and the pair for authorization is admin/admin. If these values do not allow you to open the web interface, then read the instructions carefully - the address, login and password are always indicated there.

Possible login errors

If you go into the router settings using automatic settings If it doesn't work, try setting the login parameters manually using the router's IP address.

Knowing the router's IP address, you can manually specify the TCP/IPv4 protocol parameters:

To understand what values need to be specified, let’s take the router’s IP address - for example, 192.168.0.1. Based on this address, fill in the lines as follows:

IP address – 192.168.0.2 (last digit must be in the range from 2 to 254).
Subnet mask – 255.255.255.0 (always remains the same).
The main gateway is 192.168.0.1 (the router address is indicated here).
The preferred DNS is 192.168.0.1 (the router address is also written down).

With these settings, the problem of launching the router's web interface through a browser should be resolved. Then all you have to do is set up the Internet and create wireless connection, to Wi-Fi router began to perform its functions of providing constant access to the network from different devices.

Wireless networks have recently become very popular among users of computer systems, because this has made it possible to avoid an incredible number of cables for connection, and for several terminals - also from installation additional routers. Standard devices for connection it is customary to consider, etc. Let's look at how to log into the router to make the correct settings.

Virtual networks

Essentially virtual networks represent communications that work through the use of connections through routers.

In this case, communication between computer terminals is carried out without the use of wires via a radio signal (for example, a router and a Wi-Fi module on a computer or laptop).

Router: general concepts

Before solving the problem of how to log into the router, you need to figure out what kind of device it is. The operating principle of all router models, regardless of manufacturer, is the same; only some settings may differ.

Roughly speaking, a router is a means of distributing IP addresses to connected devices, as well as transmitting and receiving a signal in order to provide network access or the ability to work on the Internet (the built-in DHCP server is responsible for this). By the way, answers to questions about how to enter ASUS router or in the menu of models from any other manufacturer, there are no fundamental differences. But you still have to take some points into account when setting up the network or the connected device itself.

Installing drivers

Another important point before solving the problem of how to enter the router menu is installing drivers. There is probably no need to explain that without the appropriate driver, the router simply will not work, since the system will display a message that it is connected to the computer. Actually, installing drivers, as a rule, does not cause any difficulties. To do this, use the original disk supplied with the device when purchasing it. In most cases, it is enough to run the Setup.exe installation file and follow the instructions of the “Add Hardware Wizard”.

But, as a rule, disks have special remedy autorun, when the main installation menu appears automatically (naturally, if the automatic recognition option is set in the system). Windows can independently install the most suitable driver, but, as practice shows, it is better to use the original installation disk, since then the router will work intermittently or not work at all.

Direct connection of the router to the computer

Now let's move on to directly connecting the router to a PC or laptop. In order, for example, to enter TP-Link router(or any other device), before setting up a virtual connection private network and the router itself, the latter must be connected to the terminal directly, using special connection is carried out into the connector of the network card installed in the system.

Note: to call the router menu, this is prerequisite. However, before doing this, it would be advisable to create network connection and basic settings regarding the TCP/IP protocol.

Connection settings

But this is not all in the preparatory actions. Before looking for the answer to the question of how to log into the router, you need to make the minimum settings used for connection. In the standard version, this is done in the “Network and Sharing Center” menu. shared access" In the settings for changing adapter parameters, you need to select the “Properties” tab and go to the main TCP/IP protocols (IPv4 or IPv6).

In most cases it is necessary to use the settings automatic receipt IP addresses and DNS server addresses. Sometimes you will need to enter parameters manually. As a rule, even for different terminals they are standard and are provided by the provider upon connection home network.

How to enter the router settings

Now we have come close to the main issue. Let's look at how to log into the router when it is already connected to a computer terminal or laptop, the drivers have been installed and presets network card.

To enter the menu in mandatory you must launch the Internet browser installed on the system. Many experts recommend Internet Explorer, but in principle this does not matter. In the address field, enter the IP address combination 192.168.1.1. Among other things, if some specific models are installed, the address may change. So, for example, log in D-Link router or Tenda can only be used in combination with 192.168.0.1.

You definitely need to pay attention to the label that is glued to the back side router. To access the main menu, the IP address, login and password are indicated on it. In most cases this login admin and a blank password (sometimes 1234). After authorization, you can get to the main window of basic settings.

Special advanced configuration options

For now, we will not go into details of the settings of the router itself. Basically, everything is automated there. Let's take a look at some additional settings, which will need to be done if connection problems arise. Sometimes you will need to manually enter the values 35000 and 35001 in the external and UDF address fields.

Troubleshooting

As for deciding how to log into the router, the matter is not limited to the basic settings alone. The fact is that sometimes quite serious problems can arise. When it is not possible to establish a connection, there can be many reasons for this. For example, an enabled firewall or antivirus software can block access to the network. The firewall should use manual port forwarding mode.

Sometimes you may need to enter IP address, DNS server, WINS server, etc. into manual mode. As mentioned above, such data is provided by the provider. Moreover, this does not apply to the router settings, but to the TCP/IP protocols in the Windows OS itself.

In addition, the problem may lie in the incorrect creation of the home network. Removal may be required here existing connection and creating something new. However, after this all the above procedures will have to be done again.

In some cases, you will need to check whether the configuration is entered correctly in the router menu. Sometimes you may need to reinstall the device driver. In any case, the problem can be fixed.

Bottom line

As can be seen from the above, in this case we considered only the main issue related to connecting the router to computer system and entering the main settings menu without going into technical details.

As for the settings specifically, then, of course, you can do them yourself, but if the user, as they say, is far from this, it is better to entrust this process to a specialist. Moreover, usually the settings menu is not Russified, so here you will need at least minimal knowledge English language. Along the way, it is worth noting that the settings have some specific parameters that are highly not recommended for an uninitiated user to change, disable, or enable. Otherwise there shouldn't be any problems. By at least any user by executing simple steps, will be able to simply log into the router or make basic settings for connecting to the network or the Internet.

A router is a device that does not require constant control by the user. It’s not uncommon for a router to be configured by a guest technician and then work for a long time without any user intervention. This situation leads to the fact that when the user needs to configure something, he simply does not know how to log into the router. If you encounter similar problem, That this article should help you. Here you will learn how to log into your D-Link router.

Step #1: Open your browser.

Logging into the D-Link router, like any other router, is done through a browser. Therefore, the first thing to do is open your browser. You can use any browser you like. It could be Google Chrome, Mozilla Firefox, Opera or any other.

Step No. 2. Enter the IP address of the router in address bar.

At the top of any browser window there is an address bar. It displays the address of the page you are viewing in at the moment. In order to log into the D-Link router, you need to enter its IP address into the address bar of your browser.

Don't worry if you don't know. In most cases, D-Link routers are available at 192.168.0.1. But 192.168.1.1 can also be used. So first try entering 192.168.0.1, and then 192.168.1.1. After you select the desired IP address, a window for entering your login and password will appear on the screen.

Step No. 3. Enter the username and password for your D-Link router.

After entering the correct IP address into the address bar of the browser, an authorization form should appear on the screen. The next step is to enter your username and password. Without entering this data, you will not be able to log into the D-Link router.

At this stage the most difficulties arise. Many users simply do not know what password is used on their router. If you find yourself in a similar situation, then you can give the following recommendations:

If you are logging into the router for the first time and no one has changed the password on the router before, then you should use the standard login and password. In most cases, on D-Link routers, the “admin” login is used as the standard login, and a password is not specified. This means that you just need to enter the login “admin” and press enter. Also on some models of D-Link routers can be used next pairs login and password: admin/admin, admin/password or user/user.
If the above login and password pairs are not suitable, then read the instructions for your router model. Everyone should be there necessary information. In some cases, the standard password may appear on a sticker with bottom side router.
If the router was set up by another person, then you should contact him and find out what password was set.
If you cannot find out the password for the router, then you can reset the router settings. After resetting the settings, you will be able to log into the router using standard password. But, in this case, you will have to configure the router from scratch.

After entering correct login/ password and clicking on the “Login” button, you will enter D-Link.

A router (also known as a router) is, according to Wikipedia, a specialized network computer that has at least one network interface and forwarding data packets between different network segments, connecting heterogeneous networks of different architectures, making forwarding decisions based on information about the network topology and certain rules set by the administrator. More to the point in simple language, then we usually use a router to create a network between computers, as well as so that they have the opportunity to access the network. True, this mostly applies to offices. At home, the router connects to one computer and actually works as an Internet Wi-Fi device.

In order to properly configure the router, you need to use its interface. Many users don’t even know how to get into this very interface. This is exactly what I want to talk about today. By the way, this issue is active on the pages of the site, but I decided to include it in a separate article. So to speak, for convenience.

For my example I will use a router D-Link Dir-300 is one of the most common models on the market, so I decided to write an article specifically around this device. But in fact, it’s not so important what brand your router is, be it TP Link, ASUS, Zyxel, Upvel or any other. They all work using the same algorithm, which means there will be minimal (if any) differences in the procedure I am describing.

Instructions for use

The first step is to plug the device into a power outlet. Then on its back wall we find a panel for connecting wires.

We take the cable included in the kit (usually it is blue) and insert it at one end into network card on your computer or laptop, and the second - into one of the LAN ports on the router (not Ethernet!). Now on the device itself, in addition to the POWER LED, the LED with the inscription LAN should light up. It is possible that your LEDs are not marked, this is not so important. The main thing is that we have just established a physical connection between the computer and the router.

Now open your favorite browser on the computer itself. It doesn’t matter what kind of browser it will be: even Mozilla, even Opera. You must enter the router's IP address in the address bar. You can find it on a sticker on the router itself (usually it is located on its bottom panel). For example, the address could be 192.168.1.1 or 192.168.0.1.

If for some reason you cannot find this sticker, no problem - use it. Click on the “Start” button, in the “Search programs and files” line, write the word cmd (without quotes) and press Enter. A command prompt will open. Type the word ipconfig and press Enter. You will see various options. Among them you need to find the “Main Gateway”, opposite which the very IP address you need will be located.

So, we figured out the IP. We enter it into the address bar in the browser and press the Enter key. A window will appear in front of you where you will need to enter your username and password. If you don’t see anything, for example, it opens blank page, it means you entered an incorrect IP address. Look at it in the way that I described just above (using command line). If you can't do this, you can use another method. Go to the control panel, select “Network and Sharing Center” there. After the page opens, on the left side you will see an inconspicuous link “Change adapter settings” - click on it. Then select your connection, click on right button mouse and click on “Status”. Network status information appears. Click on the “Details” button and look at the IP address located opposite “Default Gateway IPv4” - this is the address we need.

But we got a little distracted. Finally we got to the settings panel, or rather, to it home page. Here you will need to enter your username and password. This data is needed so that no one can log into the router’s control panel and change the settings.

There are unlikely to be any problems with the login, since it is usually the same for everyone - admin. But you can struggle with the password. The fact is that if it was changed by someone, it will be possible to get into the router settings only either or with the help of the person who changed the settings and, accordingly, changed the password.

If the password has not been changed, then you can find it on your router - exactly in the same place as the IP address for entering the panel itself. To be honest, the combinations are usually extremely simple:

Try one of the combinations, it might work for you. If the data turns out to be correct, then you will be able to appear in the router panel and change the settings as you wish.