Setting up children's watches Q50, Q60S, Q90, D99, Q100 (instructions). Solving problems when using children's smart watches Smart Baby Watch

You are offered information on the topic Setting up a children's watch with GPS q50.

Step one: set up a SIM card:

Stage 1: we check that the SIM card meets the required standard: it must be micro and compatible with 2G. High-tech 3G and 4G are undesirable for installation on children's watches - they can malfunction.

Stage 2: before inserting the SIM card, you must do the following: top up your account, turn off the PIN code request, call the operator to turn off all messages. The choice of operator should be approached responsibly. For example, “tele 2” does not match the device parameters; when working with “MTS”, a “waiting” error often occurs. Proven options that provide a stable connection are Beeline, Megafon.

Stage 3: now we make sure that the operator has provided communication and Internet access. You can use your phone or other device to check.

Step two: install the SIM card.

Stage 1: Turn off the device.

Step 2: The children's watch kit includes a screwdriver. With its help, you need to open the plate located on the back of the gadget.

Step 3: Pull out the battery - it is connected to the watch by wires, so be careful not to break them.

Step 4: Now you need to move the slot cover in the direction of the “OPEN” arrow and lift it up.

Stage 5: Insert the SIM card into the groove, first lower the cover, and then move it until it clicks.

Step 6: All that remains is to replace the battery and secure the plate. The device is ready for use.

detailed instructions

If you purchased for your child watch q50 instructions in Russian it won't hurt you. The gadget is a rather complex and multifunctional device.

Icons on the display

It’s best to start getting acquainted with the capabilities of this device from the icons on the main display.

In the center of the monitor is the time and date data: they do not require your attention to set, as they are automatically updated by the mobile operator. If you have chosen a good tariff and an operator that provides you with reliable Internet, there will be no problems with this function.

There are a number of other icons on the display, the meaning of which you should understand:

Right Sidebar Buttons

There are only three of them:

1. Key on/off. – allows:

Enable or disable a gadget without a SIM card

Hang up after talking

Reset call

Long press to record a voice message (up to 15 seconds). When you release the button, the message is automatically sent

2. Button 1

Increase volume during a call

3. Button 2

Call number 1 (installed in the SeTracker application)

Decrease the volume during a call

A single press turns on the background book.

Short presses allow you to switch between contacts

A long press allows you to make a call.

Left Sidebar Buttons

1. The SOS button allows you to:

Provide an urgent call

Accept the challenge

Listen to voice message

2. Input for a USB cable for charging the gadget.

Having understood the buttons and symbols, we can continue setting up q50 children's watch instructions which is quite simple.

Step three: install the SeTracker application

Stage 2: Launch SeTracker.

Stage 3: Leave the “Password” and “Account” fields blank (temporarily).

Step 4: Select a language.

Stage 5: Region of work: Europe and Africa.

Step 6: Click “Registration”

Stage 7: We begin filling out the fields of the proposed form:

“License” field - there is a unique number on the back of the watch. We enter it in this column.

In the “Account” field, write down your mobile or email number.

“Login” - give the watch a name

The “phone” field is filled in with the phone number of the SIM card purchased for the gadget.

We come up with a password and enter it twice: in the “Password” and “Repeat password” columns.

Confirm completion of filling by clicking on the “Okay” button

Step 8: Now a tab will open on the monitor, in which you will enter your account, password and click “Login”. Correct completion of all actions will lead you to the main SeTracker interface

Step four: SeTracker application interface

We begin our acquaintance with the generally simple and accessible interface of SeTracker by entering “Settings” and entering the following parameters:

1. SOS/number function

Enter the emergency phone numbers (SOS), mom (button 1), dad (number 2) or other responsible persons.

Number input parameter: 8, mobile operator code, phone number. The end of the input is confirmed by clicking “ok”

Check: press the button and wait for your phone to ring.

2. Callback function

Allows you to find out what is happening at any moment around your child without his knowledge.

We set in the field the phone number to which the call will be received from the watch. The watch itself will not externally display this operation.

3. Do not disturb function

A time is set (lessons, training, classes with a tutor) when calls will not come to the gadget and distract the child.

4. Function "operating mode"

Setting a schedule for providing information about the whereabouts of the little owner of the device - once every 15 minutes, half an hour, an hour, and so on at the discretion of the parents.

5. “Message settings” function

The SeTracker program interface allows you to receive a number of messages to help you monitor your child. For example; “leaving the zone” (the boundaries of the security zone you have specified), “removing the watch from your hand”, “Pressing the SOS button” and others.

To activate the arrival mode of any of these messages, move the slider opposite the function name to “on” mode.

Don't forget to indicate in the top column of the form the phone number where messages should be sent.

Confirm the completion of the settings by clicking “Okay”.

6. Phone book function

Allows you to limit the number of subscribers and control the child’s social circle.

You can enter no more than ten numbers that your child can call and receive calls from the gadget (in addition to the three main ones from the sidebar).

7. Language and time function

Set language and time zone settings.

8. Hand-held function

Once turned on, the sensor will signal that the gadget is removed and you will receive a notification about this.

9. "LBS" function

Navigation function that tracks the child's location. Just move it to the “on” position and secure it by clicking “ok”.

10. Remote shutdown function

Allows you to block the ability to turn off the gadget without your knowledge. When you press the “off” button on the side panel, the recording of what is happening around the child will start and will come to you by voice message. To enable the function, click “Cancel”; to refuse, click “Okay”.

11. Function "Restore default operating mode"

Allows you to cancel all settings and restore them to their original form. This is done with the “OK” button.

Step five: the rest of the SeTracker menu

The SeTracker application menu includes ten sections:

1. Map: in this tab you will be shown where the child is currently located (his name is indicated). In addition, you can get information about the battery charge, the last synchronization with the watch, and by pressing the “phone” button you can call your child.

2. Internal communication - that is, sending messages in one of the ways convenient for you: by voice (click “start recording”, speak the information for up to 15 seconds, the child will listen to the message by pressing SOS), by letter (select a keyboard and type text up to 15 characters).

3. Health: allows you to obtain information about the condition and physical activity of the child, his compliance with the daily routine - duration of the walk, calories burned, steps.

4. Trace: complete minute-by-minute information about the movements of the gadget owner.

5. Geofences: you set a safety zone, when your child leaves it you will receive a message.

6. Rewards: a way to encourage a child to behave well with the help of charming hearts that are reflected on the gadget’s display (with their number indicated next to them).

7. Messages: All messages that you have programmed to receive are accumulated: picking it up, leaving a safe zone, pressing the emergency call button.

8. Alarm: Allows you to remotely set a one-time, regular or regular alarm.

9. Clock: function for searching for a gadget - clicking on this button and confirming “ok” will cause a clock signal by which you can find it.

10. My: allows you to change the password, personal data, add additional devices for children (for example, to monitor the second child).

Every parent worries about their child and tries to protect him from problems. To always be aware of your child's whereabouts, use a watch with GPS. In the article we will tell you more about them.

Navigation

Of course, children won't always be little, and there comes a time when they grow up and want to go out on their own. Therefore, parents begin to look for devices so that they can always see where the child is. There are various watches with built-in GPS beacons, but they also have a phone!

Smart Baby Watch GPS Q50

Appearance of Smart Baby Watch GPS Q50

Smart Baby Watch GPS Q50 - side view

Smart Baby Watch GPS Q50 front view

So, let's talk in order about what a watch with a GPS tracker looks like and how to set it up.

Functions

Use as a telephone. A SIM card is inserted into the device itself and you can make a call to it. The child himself can also make a call by pressing key 1 or 2. The quality of the connection is good, you will not hear any unnecessary sounds. Unlike a simple phone, the watch is constantly on your hand, so it is more convenient to wear, since it will not fall out of your pocket while playing games.
Location tracking using a GPS beacon. To track where your child is now, install the SeTracker application on your smartphone, computer or tablet.

SeTracker for Smart Baby Watch GPS Q50

SeTracker application map

Installation of a kind of “fence” ( Geofence). In the application, you select a section of the territory, upon leaving which an alert will be sent.

Geofence in SeTracker

Route history. You can track where your child walked during the day. This is especially true for those parents whose children have already started school.
Voice mail. This is also an interesting function, as you can send your child a reminder or say something important.
Reward system. When a child behaves well, you can send him a heart, and if it’s the other way around, then take it away.

Hearts in SeTracker

The parameters specify three contacts per button SOS. In an emergency, the child will be able to press it and call. If no one picks up from the first number, the rest will be dialed in order.
To prevent calls from other people's numbers, a special list containing 10 contacts is compiled.
Function "Voice" allows you to hear everything that happens to the child. It works like this: enter your number in the appropriate window, the application will send a command to the watch and it will call you. You will answer the call and be able to hear everything. The watch itself will not show anything and the child will not know about it.
It is possible to set reminders about low battery remaining, about removing the watch, as well as a signal SOS.
There is also an option "Do not disturb", that is, you can set a time at which you will not be able to make calls.
You can disable the power button so that the gadget turns off only at your request through the application.

SeTracker settings

There is another option "Health". She calculates indicators such as distance traveled, lost calories and sleep time.

"Health" in the SeTracker application

How to prepare your watch for work?

General view of the Smart Baby Watch GPS Q50

Preparing the Smart Baby Watch GPS Q50 for operation

First, make sure they have enough charge. If the battery level is low, charge the watch.
Turn off the device using the power button.
Using a screwdriver, which is also included in the kit, remove the cover and carefully lift the battery, just be careful as it is connected to the device.
Insert the SIM card into the slot. Before doing this, ask her to enter a PIN code and top up her account to pay for the Internet.
Secure the SIM card with a special latch.
Replace the battery and replace the cover.
Now you can turn on the clock.

Installing the smartphone application

Or use the QR code:

Registration in SeTracker

Device ID— device number. Indicated on the cover of the device.
Account- administrator account name
Nickname- Name
P_number- phone number
Password— password for authorization
R_password- repeat password

How to work with the main menu?

Intercom. Connecting your phone with your watch. The application can send voice messages to a smartphone. Activate recording, and the application will be able to save a message lasting no more than 15 seconds. The application begins recording a message that lasts no more than 15 seconds. Pressing the SOS key starts listening to the recording. To send a message, long press the ON button. The application will write that it was sent successfully.
Map. Your current location. The application displays a map with your current location. When the icon is red, the position is determined using GPS, and if it is blue, then through a cell tower (LBS).
Settings. This is where the basic setup of the device is carried out.
Set SOS phone number. Here you can enter three phone numbers so that an alarm signal can be sent to them if necessary. When you press the button, one number will be dialed first, and if there is no answer, the other two will be dialed until someone answers.
Voice. As a rule, the number of one of the parents is set as a follower. There is also the possibility of control via telephone.
No disturbing. You can set up call barring and incoming calls barring at certain times.
SMS allerts setting. This is a setting for notifications about the end of charging, a signal SOS and so on. .
Contacts. Here you can add 10 contacts who can be called from the watch.
Restore the default work model. Return to normal operation.
Turn off. Disable the power key so that it does not turn on the watch. In such a situation, shutdown will be carried out only using the application on the smartphone.
Safety area. This is a safety zone. Its minimum radius is 500 meters. The alarm will be activated when the child goes beyond its limits.
Rewards. Click on the heart icon and the display will show hearts and quantity. The child can be rewarded or punished by increasing or decreasing hearts.
Alarm. This is an alarm clock. You can put as many as three of them for different times.
Watch. If you have lost your device, then direct the command to them. They will call within a minute to give you time to search. To stop the search, you can press any key.

Other functions

Other functions of Smart Baby Watch GPS Q50

Sending an SOS signal

Press the SOS key and hold for three seconds so that the watch sends an alert to the smartphone and changes the mode. You can enter three numbers to receive an alert. It will be repeated only three times. Notifications are sent to the application and to parents' numbers.

Alert when watch is removed

The watch has a special sensor that is located around the hand. The alarm will sound after a few minutes when the device is removed. They send notifications to parents and to the app.

Signal about the end of charging

The amount of charge is shown as a percentage. When it becomes less than 20%, a signal is sent to the application and parents.

Health

The function counts the distance traveled, hours of sleep, calories, and so on. This is very useful because you can find out if your baby is sleeping well and how much weight he has lost while walking or running.

Internal phone

Hold the key "ON" to record a voice message. After recording, the corresponding icon will appear. Press the key SOS to play a message from the watch.

Voice messages

Set up your parents' phone numbers. When the team is registered, enter the number. You will send a message by voice.

Speed dial buttons

The watch has two speed dial keys. Both make calls to SOS numbers 1 and 2.

Address book

Ten numbers are allowed. You can make calls to them from your smartphone.

How to set the clock via SMS commands?

Setting up Smart Baby Watch GPS Q50 via SMS

To manage watch settings via SMS, use a password 123456 or 523681 . From your phone, send the following commands to your watch:

pw,123456,ts#— checking IMEI number
pw,123456,center,your phone number#— installation of a control contact for the clock
pw,123456,ip,52.28.132.157,8001#— selecting a server to work with location
pw,123456,apn,APN address,APN login,APN password#— change the APN of the mobile operator. To do this, use your login and password to set up the Internet.

Video: Smart Baby Watch GPS Q50 - detailed review and setup

We can talk about the benefits of children's smartwatches for a long time. Their versatility and practicality were appreciated by parents from all over the planet. And we won’t argue that the favorite function of the accessory was and remains feedback. In simple terms, wiretapping. What exactly is this function, what are its pros and cons, how to listen to children's watches? This will be discussed in our article.

Necessity or excessive control

Hearing what is happening around your child is now easy and accessible. With one simple function, you can listen to your child in real time through a smart watch, find out where your child is, what he says and how others communicate with him. At this moment, no one will even guess that they are being eavesdropped. After all, the watch shows absolutely no activity.

Even the simplest and most popular device model has this function. With its help, it is easy to hear how teachers and peers treat your baby in kindergarten. Subsequent models – and the Q100 – also provide this capability.

One of the controversial issues regarding the need for such wiretapping on smart watches remains its permissibility. And even if we don’t touch on the law, but talk only about moral principles, it’s worth considering whether to buy such a watch. By using wiretapping on children's smart watches, parents somehow violate the child's personal space. If this is not a compelling reason for you, please buy and listen. But if you trust your child, you can simply refuse to use it, enjoying other functions of SmartBabyWatch.

Easy connection and settings

If you feel something is wrong, are worried and can’t find a place for yourself, you can connect a wiretap on your children’s smart watch from your phone at any time. The setup process takes very little time and does not require special knowledge.

After purchasing a smart watch on your smartphone, you need to download the special free SeTracker application and create your account using your mobile phone number. Now the children's watch is under your clear guidance. The next steps look like this:

In the main menu, go to the “Settings” section and select “Feedback”. Under such a beautiful name lies ordinary wiretapping.

Within two minutes, the watch receives a certain signal and calls your phone back.

You pick up the phone and, as in a normal conversation, you hear everything within a radius of up to 5 meters.

Everything is elementary simple. And to fully understand the principle of operation, you need to know a few points:

the call request is sent via the mobile Internet, so make sure that your mobile operator’s tariff allows for long calls;

the watch does not indicate in any way that it is in listening mode: it does not light up, does not signal, no indicators blink;

The connection is one-way, so you don't have to worry if you have cars honking in the background. In this mode, only the microphone works;

No one except you can interrupt the call.

To connect to a child's watch for wiretapping, you need your phone, the watch itself and a few minutes to set up. This unique feature will allow you to always remain calm and not worry about your baby. After all, at any time you can find out what he is doing and make sure of his safety. You can use this function only in emergency cases or whenever you feel like it.

However, if your child has already grown up and is in adolescence, then, frankly speaking, he may not like the invasion of his personal space.

Therefore, when using an accessory as a teenager, it is better not to abuse the wiretapping function. Or, when buying a watch, talk openly with your son or daughter and find out their opinion on this matter. Discuss how your child feels about the fact that you can find out what he is doing at any time. And agree when you have the right to make such wiretapping calls: whenever you want or only if absolutely necessary. In the future, this will help avoid conflict situations and ensure comfort in using the accessory for its young owner.

The safety of the child is the main concern and natural desire of every parent. The rhythm of life in modern cities, in which parents are constantly at work and children are often left to their own devices, does not allow adults to be completely confident that their child is safe. The presence of a nanny also does not guarantee that in the absence of adults the child is not subject to moral or physical negative influence.

Many children, not feeling the control of adults or succumbing to the negative influence of friends, often skip school or walk around the city where their parents prohibit them. How should children take reasonable precautions when they are away from home - visiting friends, on the street or in other public places? Even if the child is at school, many parents only guess that their child is not entirely calm and can endure insults from classmates, and sometimes from not entirely adequate teachers.

The child’s protection is actually completely in the hands of the parents. And if just recently parents simply couldn’t find a place to worry when their grown-up offspring went for a walk, now they can remain in relative peace. To ensure that the baby grows up healthy and the parents’ nerves are more or less calm, experts have come up with a unique lifesaver for adults - wiretapped watches for children.

What is special about children's watches with wiretapping?

Such children's watches are also called Smart Baby Watch, Smart Baby Watch GPS, children's watches with a phone and a GPS tracker. This is not just a time control product, it is, to some extent, a guarantee of the baby’s safety and a source of peace for adults. Here is a complete list of the main functions of children's Smart Watches:

Convenient watch that shows the exact time, date and day of the week.
They can be used as a telephone, that is, receive incoming calls and make outgoing ones. The conversation with the baby takes place over the speakerphone, the sound is clear and loud.
There is a function for sending and receiving messages (voice and SMS).
Smart watches have a special beacon (GPS, GSM, GPRS).
A very convenient feature for concerned parents is hidden wiretapping.
One of the most important missions of smart watches is the emergency SOS button. Dialing occurs unnoticed - with one press of a button on the watch panel - and can be automatically repeated to the first three numbers in the watch memory in turn. The SOS button allows you to avoid many unpleasant and dangerous situations.
Limitation of the territory where the baby can safely be, that is, “Electronic fence”. You can put marks on the device for its safe location, for example, the territory of a school or yard. If the baby goes beyond the “fence,” adults receive a notification about unwanted removal on their phones.
A smart watch with discreet wiretapping can show adults the entire history of their offspring’s movements during the day.
Smart Baby Watch has a convenient function to ban a whole list of unwanted children's contacts.
Another super useful feature of a smart children's gadget is the history of children's biometric readings. This is the baby's pedometer (a function borrowed from fitness bracelets), his daily route in meters, the number of his active movements (running, jumping and other movements) and a count of calories burned.
Useful alarm function.
An incoming signal about the low charge of the watch, a search for the device if it cannot be found in the room. Children do not always notice that the watch battery is low. Therefore, the developers treated this problem with understanding, and in this case, an SMS is sent to the parents’ phone device.

Important: If the device nevertheless turns off, the last recorded location of the baby will be shown on the map in the Se Tracker application.

Smart watches with wiretapping have a special sensor on the back panel, and if a child removes it from their hand, the adult’s phone instantly receives a notification about this action.

Other advantages of a children's gadget

The benefits of wearing a smartwatch are many. In addition to the fact that a GPS device is a stylish accessory, it instills in the child a sense of responsibility and punctuality, the ability to value and properly manage their time. Besides:

The device tracker uses two modern technologies to track the location of its owner: satellite (GPS) and location via telephone network (LBS). You can know everything about your baby, even when you are thousands of kilometers away.

Watches with wiretapping for young children in most cases replace mobile phones for children, which they always lose and drop. The telephone directory of most gadget models stores up to 10 or more numbers in memory. To make calls and send SMS, you must purchase a regular Mini SIM card.
The material of the product body is high-quality anti-allergenic and environmentally friendly plastic. It has a modern design and bright colors. The product does not have extra buttons that do not carry any meaning. Kids quickly and easily begin to understand the functions of the device and control it. The product is difficult to turn off; to do this you need to know a special combination of buttons.
The product's body is waterproof - it is not afraid of accidental drops of water or street splashes.
The radiation of a smart gadget in active mode is 3-5 times lower than that of a mobile phone.

In addition, we should not forget that from the first years of life our children are immersed in the world of electronics and are saturated with various technological knowledge. This new phenomenal generation also needs matching accessories. Smart Baby Watch is suitable for both girls and boys, as well as for children of any age - preschoolers will like it, and in some situations - even teenagers.

What you need to get your Smart Baby watch started

To start using the smart device, you should insert a Mini-Sim card from any mobile operator. The card must have at least minimal GPRS access to access the Internet, a positive financial balance and be able to receive and send SMS.

All functions of the accessory are controlled remotely using an installed application in Russian. The application is also installed on the parent's tablet or phone. Next, you should register in the installed program and enter all the necessary information about the settings. One watch can only be linked to one account, but if a family has two or more children who love to run away from home, adults can easily track the movements of each of them, of course, provided that everyone has a smart watch on their hands. To do this, in the Se Tracker application you just need to add “new device” to your “profile”

How smart watches “power”

Every Smart Baby Watch has a battery. He hides behind the panel of the product. The watch can be easily charged using a mains charging cord or a PC charging cord. Usually the charge in the watch lasts up to 3 days. The watch is fully charged in 2 hours.

The possibility of invisible control is the main advantage of smart adults

According to reviews from parents who have already purchased and experienced all the positive aspects of a smart children's gadget, the most common and necessary function is the wiretapping function in order to be aware of what is happening around the baby. You can, if not control, then at least know the behavior of your baby and the people around him. This will help keep your finger on the pulse and protect your child from the negative influence of some friends and adults, including unscrupulous educators and teachers.

To do this, you should send a special SMS with a command to the phone number that the children's watch has. The smart gadget secretly calls the adult back, so you can hear everything that is happening around him. The sound can be heard well within a radius of up to 5 meters.

Important: You don’t have to worry that the child will notice something and find out about parental listening - the screen is blocked during this time and does not show itself in any way.

Of course, not all children like the fact that their parents will put a wiretapping device on them. Adults should calmly explain to the child all the positive aspects of this step. And in order to make the device more interesting, gadget manufacturers have installed the “Friend” function in many models. With this feature, a group of guys with watches can happily send each other voice messages, always know each other's whereabouts, and can play secret secret agents.

Another pleasant children's fun that children like is that for good behavior and following all the instructions of adults, a child can receive reward hearts on the gadget.

Other product features that can make life easier for parents

For any parent, their baby is the most valuable thing in the world. Therefore, the activity and curiosity of children of preschool or primary school age, striving for independence, gives adults many anxious hours.

Important: Due to their age, children are not able to take full responsibility for their safety. Therefore, in any difficult situation with a child - a dangerous environment, the child missed his bus stop on the way to school, or urgently needs the help of adults - you just need to press the panic button.

This is a spy function that will allow you to quietly listen to everything that is happening around your child.

How does this happen?

A call is made from your phone through the application to the watch. But the watch looks like it’s turned off during a call, without giving any sign of an incoming call!
Your child and his environment will never notice that you hear everything that is happening around.

How will wiretapping on Smart BabyWatch be useful to you?

In any situation (for example, when pressing the SOS button) you can discreetly listen to what may threaten the safety of your child! Or simply for the sake of calming your soul, when you leave your child with the nanny for the first time, to find out how she treats him.

In what models of Smart Baby Watch (Wonlex) with GPS tracker does Wiretapping work?

Absolutely everyone! Listening is carried out through the application:

How to set up “Wiretapping” on a smart phone watch with GPS Smart Baby Watch?

Listening (callback) is configured through the application.

In the SeTracker program, in the "Settings" section, you need to select the "Message settings" item. Next, enter the parent’s phone number in the field separated by 8 without spaces, dashes or parentheses. The same phone number will appear in the “Call back” settings menu item. Open “Call Back” and click the “Ok” button. Wait for an incoming call from your watch to your smartphone. You receive a call and after that you hear in telephone conversation mode everything that happens within a radius of three meters next to the clock.

In the Aibelie program, section “Settings”, select “Silent ringing for parental control”. Enter your parent's phone number separated by 8 without spaces or parentheses. Next, click on “Ok” and wait for an incoming call from the watch to your smartphone.

In the "Care and Protection" program, wiretapping is not the same as that of SeTracker and Aibelie. The program allows you to make a recording for 15 seconds which you can listen to through the application. As a rule, this is not convenient and we will not dwell on the description of the function in this application

At the time of listening, only the microphone is working on the GPS watch, the speaker is turned off. Therefore, you don’t have to worry that your child will hear you or the noise next to your smartphone.

Don't forget that wiretapping costs money. Money is debited at the rate of an outgoing call from the watch's SIM card. But this does not prevent meticulous parents from listening to several lessons from their beloved child.

You also need to know that during wiretapping, a watch phone consumes energy like any phone. Therefore, the battery may drain quickly

If you still have questions about watches with GPS, then our specialists from the Jeepskid company will be happy to tell you everything they know