Hello friends! In this post I will continue the topic of how to set up DVB-T2. Terrestrial digital TV, 20 channels for free, how to set up an antenna and enjoy a high-quality image.

If you are interested in what types of digital television there are and how to choose the right TV given this variety, then follow this link and

You can ask about how to choose the right antenna for digital television

Well, right now, about how to set up the antenna and equipment for digital channels.

A little general information for a better understanding of the matter.

Currently airing digital television offers 20 viewings television programs, and to listening to 3 radio stations. Total 23 and these channels are included in two digital television packages.

But what’s interesting is that the user does not need to separately configure all 23 frequency channels on his TV or set-top box, but only two.

P.S. Residents of Moscow and the region can enjoy more; they are broadcasting a third package, which already includes 30 digital television programs and the need to tune in three frequency channels.

To make it clearer, let's remember how it works in analog signal? In this case, on one frequency channel There is a broadcast of one TV channel, for example, in my region, on frequency channel 6, the First Channel was broadcast, on the frequency of channel 12, the Rossiya TV channel was broadcast, and in the UHF range, on the frequency of channel 27, there were broadcasts from the NTV channel. And then further - One frequency channel = one television channel!

With the advent of digital broadcasting, everything has changed!

And one of its advantages is that now not one TV channel is broadcast on one frequency channel, but ten or more at once, so to speak in a package. This is called “Package” or “Multiplex”. For example, from the television center in Belgorod on channel 43 of digital broadcasting 10 television channels and plus 3 radio stations is the first package, and on the 46 channel frequency another 10 TV channels are the second package. Thus, only two television frequencies are used, and not twenty-three. But keep in mind that if in Belgorod these are channels 43 and 46, then in another city these will be different frequencies.

There is only one thing that unites everyone, in any region these will be frequencies of the decimeter (UHF) range, and therefore an antenna is also needed for UHF. (ADDITION: Currently, some broadcasters are still broadcasting only one of the two packages, i.e. only ten channels.)

Find out on which channels Digital is broadcast terrestrial television in your region, where the transmission towers are located and whether they operate in full mode, broadcasting two packets, This information can be extremely useful for the successful installation of the antenna.

So, if you decide to organize digital terrestrial TV channels You will need:

1. A TV with a built-in DVB-T2 tuner or, if it does not have one, then you will need a set-top box for digital television, also in DVB-T2 format.
2. And of course the antenna itself, UHF range. Indoor or outdoor, depends on the proximity to the translator and the quality of the signal in your area.
3. Television cable, antenna plug.
4. Sometimes it helps to have a helper, and it never hurts to have patience and persistence.

How to find out if my TV is capable of receiving Digital Terrestrial Television

First, let's find out whether your TV is capable of receiving DVB-T2 signals without a set-top box, the fact is that not all devices are able to do this, old, non-flat TVs don’t even need to be checked, but flat LCD TVs may or may not receive . But if you know exactly what your TV is capable of, feel free to skip this part.

There are several ways: 1) (Dreary) Get the technical passport from the TV and look in the “technical specifications” section to find the presence of DVB-T2 there. Why is it boring? Look at your passport!….. Although sometimes you get lucky.

2) (Simpler) There is a tag on the TV case, on its back, with the TV model written on it, write it down or take a photo. Next you need to enter the TV model into search bar browser and add the word “Characteristics”. See examples in the photo below.

The model has been determined, we type in the search engine…….

Upon entering the site, select “ Specifications» then “Advanced” And we get where we need to be.

As you can see, this model is capable of receiving DVB-T2; it does not need a set-top box. Further designations indicate: C - digital cable, S2 - digital satellite. But we are interested in DVB-T2 and it is present, otherwise we would have to purchase an additional set-top box for digital television.

How to set up your antenna and TV for digital TV under different signal conditions

Let's look at the simplest option first: You live in an area of ​​good, reliable signal reception. We have decided on the antenna, an article about this will help you. We connected the antenna to the TV and turned on auto channel search; in some models, when we go to the settings menu, the TV may prompt you to select and configure analog channels or digital choose digital. If everything went well, the TV itself will save the caught channels. You can admire excellent quality Images.

Let's complicate the situation a little. On auto-search, the TV did not catch anything, or only a few channels that were snowing. If this is so, then these are not digital channels, but ordinary analogue ones; digital television cannot go with the snow. (the fact is that during auto search, the TV can scan the entire range, both digital and analog).

Your next steps: If the auto search did not help, then It will greatly simplify the situation by knowing which TV channels broadcast the first and second multiplexes in your area. And also where and in what direction the TV tower is located from you in order to correctly point the antenna. If you don’t know this, then you can also see the desired direction of the antenna by paying attention to where the neighbors’ antennas are “looking.” Just don’t use satellite dishes as a guide; they are pointed at the satellite.

If you know the channel number, then do the following - You need to find the mode in the TV menu manual settings, do not forget to select “Digital”; it may be designated as DTV. Next, your task is to dial from the remote control the channel number on which one of the multiplexes (packages) is broadcast. IN manual mode a scale will be displayed on the screen that visually shows the signal level received by the antenna. (Sometimes there may be two scales, for example “Level” and “Quality”, refer to the bottom one)

And now, on the scale, you can see whether there is a signal from the antenna, in some cases, if there is no signal, then the indicator on the scale may behave like this: It will jump, zero percent - one hundred percent - zero - one hundred ..... etc. d. This indicates there is no signal. By changing the position and direction of the antenna, visually determine best level signal, and this level should be stable, and if it changes, it should be within small limits, not to zero.

IMPORTANT: Please note that the result from changing the antenna position will not be reflected immediately, after about 5 seconds. So look best position stages, each time taking a short pause, observing the signal level on the scale. If the antenna is located on the street, then it will be more convenient to work with an assistant.

When we managed to find the antenna position at which the signal is stable, we give the command to search and save channels. We repeat the search and save procedure for the second multiplex, indicating its channel number (if there is broadcasting of two multiplexes, it is not everywhere yet)

And now completely a difficult situation: You live in an area with difficult television reception. This may be due to the distance from the transmitting tower, the complexity of the terrain (mountains, lowlands, wooded areas). High-rise buildings located quite close to you and at the same time standing on the way to the transmitting tower, your antenna directed at the tower seems to “rest” against the high-rise.

In these cases, the principle of the adjustment itself is the same as described above; you need to visually determine the best antenna position using a scale. But the antennas used and some methods differ.

Antennas in difficult conditions receptions need to be used active ones i.e. with an amplifier, also structurally having a higher gain. Typically, the longer the antenna arm, the greater its own gain.

Methods include the following: Determine if there are other transmission towers in a more favorable position for you. And try to catch a signal from them (fortunately they will be built quite tightly)

Using masts and other heights is the task of raising the antenna higher. (Effective in lowlands and wooded areas)

In built-up areas that are not very far from the tower, it is not necessary to use powerful antenna, try to catch the reflected signal, point the antenna not at the TV tower, but in the opposite direction, at the building behind you or on the side. If it is possible to install an antenna on the roof of a high-rise building, this will give excellent results.

Antenna setup via digital set-top box

When using a digital set-top box, everything is the same as described above; it is better to set it up manually in order to see the signal level. The only difference is that the TV plays the role of a monitor connected to the set-top box via hdmi cable or RCA (tulips). This means that all settings need to be made in the set-top box, and not in the TV. Just don’t forget to switch the TV to the appropriate VIDEO or HDMI mode (depending on what connectors you used for connection)

To do this, you need to find the corresponding button on the TV remote control, in different models it can be indicated in different ways, here are some examples, separated by an asterisk: AV* AV/TV*VIDEO* SOURSE * HDMI * RECTANGLE ICON WITH ARROW IN* INPUT* In some SONY TVs The order is as follows - HOME - Settings - External inputs.

All further actions settings are made using the remote control from the set-top box, through manual or automatic search.

Do not forget that in this case we connect the antenna to the set-top box, and not to the TV.

What you need to know when choosing digital set-top box read in

Well, I hope this article can help you in connecting digital broadcasting to your home.

P.S. I decided to add them below to this article as interesting cases related to tuning antennas become available. If you have any, write them in the comments and they will definitely appear in your feed.

1. In my practice, very rarely, but there were cases when the antenna did not receive the signal at all, but as soon as I moved it literally a meter to the left or right, everything went fine, we returned it a meter back, again everything disappeared.
2. Today I encountered another incident. I'll describe it in detail. The situation is this: An old TV is on the floor, it works great through the set-top box, the indoor antenna is on the windowsill nearby, the signal level is about 70-80%. In this case, there is the following task.

You need to set up the number on the new LG LCD. I put it on the windowsill, next to the antenna that I connect to it, so what? LG does not see a signal at all, not even an ounce. Maybe it doesn’t support DVB-T2, I thought! I checked the model, no, everything is supported in order. What's wrong with the antenna? No, the old TV works through a set-top box. I'm at a loss!

I connect a set-top box to the new LG (What if!)…….. There is a signal through the set-top box, but below 10% - It’s some kind of mystery why everything is fine with the old TV, but with the new one, which, even when in monitor mode, is connected through the set-top box, - television signal falls completely. 😯

After a short “Dancing around and around” It turned out!

The power supply of this LG was external and it was connected to the socket there, on the windowsill (there was an extension cord tee there). So, the OH power supply emitted such radio interference that being next to the antenna completely jammed the signal.

It was worth smashing into different sides, a few meters, the antenna and the power supply of the LCD TV, and everything immediately returned to normal. Bringing it close to the antenna again, the signal disappeared!

3. If you use an indoor antenna and your window is covered with metal blinds, then they can also seriously interfere with the signal. Keep this in mind!

When a new level of data transmission quality appeared, the DVB-T2 digital television network was launched. Digital television provides high quality pictures and an excellent transmission signal. But to set up a connection to this network, you need to have necessary knowledge, choose correct receiver and set it up well.

How to connect the T2 module and configure it will be described below.

How to connect a T2 set-top box to a TV

The T2 tuner is quite easy to connect to your TV. If you have experience connecting players, antennas and other devices to your TV, then connecting the receiver will not be difficult.

We connect the antenna to the receiver, and from it we connect the wires to the TV. This can be done using standard HDMI wires, "tulips" or SCART. The most important thing is that you don’t have to pay to call a specialist. However, if the master can connect the set-top box to the TV for free, then it’s worth leaving the matter to him.

How to connect DVB-T2 to a TV without a set-top box

To connect your TV directly to the DVB-T2 network without purchasing a receiver, you can immediately purchase a TV with a built-in DVB-T2 tuner. This saves space, time and costs. Among other things, you can control T2 channels with one TV remote control, while the receiver will have two remote controls.

Today, almost all LCD TVs have a built-in tuner, which makes connection easier. Simply insert the antenna into the desired socket.

How to set up DVB-T2 using a receiver

After installing and connecting the receiver, you need to set up the television. To do this, follow simple steps:

• We go to the console menu.
• Click “Quick setup”.
• If the default is another country, then set it to “Russia”.
• Then you must select the “DVB T2” standard. Often stands in the field DVB standard T/ DVB T2, which leads to the receiver looking for DVB T quality channels, and only then DVB T2. We need DVB T2 and its excellent quality.
• Then click “Auto Configuration” and everything will be done automatically.
• After finding the channels, you can also watch detailed information by connection quality by clicking the “Info” button.

This way you can set the receiver to receive all the right channels. But the setup does not always go smoothly. Sometimes problems arise.

What to do if DVB T2 setup does not occur

There are several options why the setup does not occur:

• The problem is in the receiver;
• The problem is in the antenna;
• The problem is with the TV.

First, try setting up using a different antenna. If it helps, then the problem is in the antenna, and if not, then the receiver is to blame.

If the antenna is to blame, then only a specialist can help. If the receiver, then several options are possible. Firstly, the receiver may have incorrect firmware. Then you need to reflash the console. To do this, go to the manufacturer’s website and download new firmware, write it to a flash drive and insert it into the receiver. It will update itself and the problem will be resolved.

If updating the firmware does not help, then the problem is most likely in the electronics. In this case, it is better to return the set-top box for service or replace it under warranty.

You can also check the TV itself. To do this, use the set-top box on another TV, and if it works, then the problem may be in the TV settings. In this case, you should contact the manufacturer. There they will be able to tell you how to correctly set the TV settings to connect the receiver.

How to choose a set-top box for DVB-T2

The choice among receivers is quite large. Here are the most popular receivers that are recommended to buy:

• Trimax TR-2012HD
• Strong SRT-8500
• Strong SRT-8502
• Thomson THT702
• Trimax TR-2012HD PVR (TR-2013HD PVR)

Their price starts from 1000 rubles and above depending on the functions. More expensive receivers have more fine adjustments, better reception signal, more various inputs to connect additional devices, and they also work faster. Compared to satellite set-top boxes, the DVB-T2 receiver is inexpensive.

You can also go to any hardware store and there, on the spot, choose new receiver, after consulting with a specialist.

For many reasons, connecting digital television (cable and satellite TV) is now very popular, especially considering that you can connect it even to an outdated model of TV. Now there are many companies that provide digital TV connection and setup services for a fee. . Most people turn to such companies for help, having no idea that setting up TV channels on their own is not difficult. The main thing is to stock up on the necessary equipment and follow all the steps exactly according to the instructions.

Before you start self-configuration digital channels, you need to understand what digital television is, how it differs from analogue, how it works and what its advantages are.

Digital television is modern way transmission of video footage and audio track in an encoded compressed format over specific channels to the device directly from the translator. This type of television has the following advantages:

• Consistently high quality audio and video signals, unaffected by external factors.
• Mobility - to connect, you do not need to stretch cables and connect unnecessary equipment.
• Digital TV is available in remote areas, for example, in the country.
• A large number of television channels - information, entertainment, sports, children's.
• The ability to set up television yourself, without turning to specialists.
• Digital TV opens up the opportunity to use additional options, including the Internet.

General settings

There are several ways to set up digital television, each of which has its own pros and cons. It is worth considering that purchasing a kit for connecting a package of channels may have different costs depending on the selected connection option.

• Via antenna. To set up terrestrial television, you need to connect the antenna and amplifier to the TV tuner, and it to the TV. You can choose from manual and automatic search for TV channels. When autosearching, there is a risk of multiple duplication of the same programs - you can delete them by switching to manual settings.
• Via tuner. Receiver bonus – broadcasting standard federal channels. When connecting a TV tuner to a regular TV antenna you need to use the channel search function. Tuner prices are about 1,500 rubles.
• Through fiber optic cable. Equipment can be purchased from telecommunications companies such as MTS and Dom.ru. The kit includes a cable, attachment and control panel. The cable is connected to the antenna socket. The cost of service is 500-1000 rubles per month (depending on the provider and the number of channels).
• Through satellite dish. It is best to entrust the installation of the antenna to specialists - they will select a suitable place for installation. The receiver is connected to the TV using a low-frequency or high-frequency cable. The cost of the equipment is approximately 3,500 rubles, and the annual fee depends on the selected package.
• Using the function. Most quick way, taking about 5 minutes. IN modern TVs such well-known brands as have a built-in Smart TV function. With her help in automatic mode It is possible to find all available TV channels and save them to the device’s memory.

The principle of searching for channels on TVs from all manufacturers is approximately identical:

1. From the remote control, go to the TV menu, go to Settings.
2. Find the item “Search for channels” - select automatic or manual search.
3. In the window that pops up, from the two options “Antenna” and “Cable”, select Cable TV.
4. The “Cable TV Preset” tab will appear. Select the “Full” item.
5. IN empty fields enter the following data: frequency 314, modulation 256, data transfer rate 6956. Confirm the selection with the “Start” button.
6. After a while, programs will begin to appear on the screen. At the end of the search, the number of channels found will be displayed.

Depending on the TV model, digital television settings may have some features, such as the sequence of steps and the names of menu items.

Setting up LG TVs

The menu and firmware of LG TVs may differ depending on the model and year of manufacture, however, all devices of this company have similar features, which you need to navigate. To set up digital channels on your LG TV, you need to do the following:

1. connect equipment (antenna, cable, tuner);
2. on the TV remote control remote control press the “Menu” button;
3. in the window that pops up, select “Option”; in the “Country” sub-item we indicate Germany or Finland;
4. By pressing the “Back” button on the remote control, we return to the original menu, this time you will need the “Settings” item;
5. in the drop-down list select “Automatic search”, connection type – “Cable”;
6. we ask standard values the three above-mentioned characteristics and click “Start”.

There is nothing complicated about this; you can cope with all the manipulations in 5-7 minutes. It is important not to forget about choosing a country, otherwise nothing will work out. It is also recommended to disable the auto-update channel feature, otherwise every time you turn on the TV again, the settings will always be reset.

Setting up Samsung TVs

The entire setup process on TVs Samsung is also performed using the control panel and includes the following steps:

1. connect the antenna to the TV;
2. Press the “Menu” button on the remote control;
3. With right side A list of tabs will appear, you need to stop on the line “Channel” or “Broadcast” - next to the name there is a satellite dish icon;
4. in the window that appears on the left, open the “Antenna” item and select “Cable”;
5. Scrolling a little lower we find the “Country” item, select “Other” from the list - after this the system will ask for a pin code (enter 0000);
6. after successfully entering the password, a window will appear in which you need to select the “Cable” signal source;
7. at the end, select a quick automatic search for TV channels, and also enter, by analogy, the above values ​​for frequency, modulation and data transfer rate.

At the end of the search, which takes a couple of minutes, all found air channels will be displayed on the screen.

Setting up Philips TVs

In principle, on a Philips TV you need to do standard actions, described above. But there are still a couple of nuances, and some menu section names may vary. The instructions look like this:

1. connect the antenna to the TV;
2. open the menu;
3. Select “Install” from the list (gear icon);
4. an auxiliary window will appear on the right, in it we look for the line “Channel settings”;
5. another window pops up on the side - there you will need the “Automatic installation” option;
6. do not be alarmed by the appearance of a warning that all old saved channels will be deleted from memory - we confirm that we agree to the conditions;
7. click the “Start” button, then select “Reinstall channels”;
8. in the window that pops up, open the “Country” tab and traditionally set Germany or Finland, then go back a step;
9. select the connection type “Cable”;
10. make the necessary adjustments in the “Settings” section – enter 314 in the “Baud rate” parameter;
11. Finally, you can click “Start” to make the TV start searching for TV channels.

Every day modern technologies are developing, improving the functionality of technology and expanding the capabilities of equipment. New TVs give you great choice: you can watch digital or other channels anywhere. More recently, the pinnacle of desire was analog television, and now it's time to know how to set up digital channels. This new product is becoming more accessible to people buying TVs every day.

What is digital television

Many people are unfamiliar with even the concept itself. Digital television - modern method video signal transmission and reception in compressed form. It can be used to reproduce pictures impeccable quality. This type of television has the following advantages compared to analogue:

1. High quality video and sound. Television broadcasting is virtually immune to interference.
2. Mobility. The signal reaches the user, bypassing unnecessary cables and equipment. You can easily set up your equipment at the dacha or on vacation.
3. The number of channels and programs will satisfy everyone (children and adults).
4. You can connect your TV as quickly and easily as possible. There is no need to call specialists.
5. Television provides Internet access and other additional services.

Methods for setting up digital channels

Exist different methods connection to television. Each of them has its own advantages and disadvantages. Before you set up high-quality channels, you must decide on the connection method, and you must take into account that each option has a different cost. If you choose the wrong setup method, you may experience that the TV does not find digital channels.

Via antenna

Want to know how to set up terrestrial digital television? To do this, you need to connect the antenna and amplifier to the receiver, and it to the TV. The easiest way is to use auto search: it will take a long time, but in the end you will get about 20 channels. The digital television antenna will find them, and the adapter will offer to add them to the menu. If too many programs are duplicated, then use fine or manual tuning.

Via receiver

Digital television without a set-top box is extremely popular. Owners of DVB-T2 receivers can use one remote control instead of two. In addition, the device provides broadcasting of federal channels. The tuner connects even to an ordinary indoor antenna, thanks to him, he manages to watch many programs on good quality. In order to make the settings, you need to use the auto search function. The approximate cost of the receiver is from 1100 rubles. up to 1700 rub.

Via cable

Many providers, such as Dom ru, MTS, Cascade TV, provide the opportunity to view digital channels. To set up you will need a separate DVB-C receiver with remote control. However, almost all modern TVs already have such a card built-in. In order for programs to be displayed, you only need to connect the cable with the provider signal to the antenna socket. To configure, turn on the auto search function. The amount of payment for a cable TV package per month is small, it amounts to 500-1000 rubles. per month (depending on the package).

Via satellite box

Let's look at this method of setting up digital TV using the example of the Tricolor provider. The first point is choice right place for the antenna. To be sure you are right, get advice from an installation specialist. Once this stage is over, you can think about how to properly set up digital channels. The process is divided into stages, and the set-top box is connected to the TV using a high-frequency or low-frequency cable.

Features of these options:

1. HF All equipment needs to be disconnected from the network. Insert the cable into the antenna, connect to the “RF out” output on the receiver. Connect the devices to the network, run an auto search on the receiver. If the system is working properly, it will stop at “No Signal”.
2. LF. Connect the receiver and TV with a cord with “tulips”, set the video mode and wait for the message “No signal”.
3. Turn on the menu with the “Signal Strength” and “Signal Quality” scales. You can find it by turning on the “i” key on the remote control. Turn the plate up and down, left and right until both scales are full.
4. Then check the image quality on the screen. If you did everything correctly, the picture will be clear, without any interference.

There is another option: turn to adjusters who will not show and tell, but will do the job quickly and clearly. Disadvantages - it is not free, and you will be tied up during their visit. The approximate cost of setting up the receiver by specialists is 3,500 rubles, but the amount of monthly payment depends on the package you choose and other conditions (promotions, bonuses, Special offers etc.).

Smart TV

TVs with Smart function TVs appeared in the last decade, but they are convenient, have advanced functionality, and support the DVB-C format. How to quickly set up digital channels is written in the instructions for the device. You will only need 7-10 minutes of free time and a little patience. Digital TV Samsung, LG or a model from another manufacturer will automatically change frequencies, find programs, and store them in memory. The main advantage of this method is that it is free and does not require additional equipment.

Setting up channels on your TV

The principle will be the same for all devices. See how to set up channels on the latest LG series, for example. If you have a TV of a different model, but modern, then the process will not be much different. Step-by-step instruction:

1. Select the Settings button on your remote control.
2. A menu will appear on the screen. In it, open the Channels item and click OK.
3. Select Auto search by clicking OK again.
4. In the menu that opens, select Cable TV.
5. In the tab that appears, select Other operators, click OK.
6. The “Cable TV Preset” menu opens. In the Type item, use the arrows on the remote control to select “Full”.
7. In the search parameters, check the box “Digital only” and click the “Run” button to start the search. You don’t have to check the box, then in addition to the TV, it will also find cable channels.
8. After a while you will see how many programs the TV can pick up. Function automatic update channels must be turned off. Click "Done".
9. To sort channels, select “List” on your remote. Use the arrows on the remote control to move the programs to the positions you need.

Why doesn't digital TV show? Open the instructions for the TV, go to the section that describes common mistakes, ways to overcome them. Finding the answer to your question is not difficult, and the sequence of actions allows you to repeat the setup procedure and do everything correctly this time. Channels found, set to in the right order, all you have to do is enjoy watching!

Video: how to set up digital broadcasting

It's easy to watch TV with images that meet your expectations of quality. To do this, you need to learn how to set up digital channels, and the clarity will help you carry out the procedure quickly and easily. The video will be a great hint for you. Connect yourself to a new television, enjoy watching your favorite films, series and TV shows.

Automatic setup on Samsung

T2 in manual mode

television: setting up_digital_channels

Setting up a TV receiver to receive digital channels

To be able to receive digital channels on the network cable television Infolink support for digital broadcasting standard is required DVB-C your TV receiver, as well as the compliance of the subscriber wiring with the requirements GOST R 52023-2003.
A list of broadcast digital channels, as well as their broadcast parameters for manual configuration, are posted on the website.
List of TV receivers guaranteed to support DVB-C, you can see. If your model is not listed, make sure the standard is supported DVB-C your TV receiver before tuning in to digital channels. If the TV does not support the standard DVB-C for receiving digital channels can be purchased digital DVB-C receiver (set-top box). You can purchase from us digital receiver with DVB-C support and with a built-in conditional access system DRE-Crypt, necessary for viewing encrypted channels on the Infolink cable television network (you can see the description)

Our network has implemented the function “ Quick search", which significantly reduces the setup time of TV receivers. In order to use this function, you must select the “Network” search type, then use the following parameters:
Network ID (Network ID) - 999
Frequency - 450 MHz (450000 kHz)
Symbol rate (s/r) - 6875
Modulation (QAM) - 256.

If for some reason the channels do not appear in the list of available channels, try using a manual search.

LG

47LE5500, LD420 and analogues
Menu → Options → Select the country Finland (or Switzerland) → Cable → Full search.

Philips

Episode 7, 9
1. Update the firmware to the latest version.

2. “House” icon, select “configuration”.
3. Select the “installation” menu.
4. Select “preferences”, then “studio”.

4. Go back to the “installation” menu, select “channel settings”
5. Select “automatic”, “start”, “reinstall channels”.
6. Select a country: either Switzerland, or Finland, or Germany. Next, select “cable”, “installations”.
7. Set the speed mode to “manual”, set the symbol rate to 6875, Frequency scanning - “full scan”, click “ready”, “start”. We wait 30-40 minutes - analog channels are found.

8. Turn off the TV using the remote control. Then turn it on, then in the menu “configuration → installation → channel settings → digital mode reception testing” set the transmission speed mode manually (6875). Then search.
9. Enter the frequency 450.00 MHz. click search. There are digital channels, click “save”.
10. Return to the “installation” menu, then “preferences”, select “home”.

Samsung

LE40C550J1W and analogues
1. Enter the menu (green button).
2. Select the “Channel” menu (the “Satellite dish” icon).
3. Select “Auto Configuration”.
4. Select the signal source - “Cable”.
5. Choose what to look for - “Digital and analogue”.
6. Click “Start”.
After 15 minutes, autotuning is completed.

General algorithms for setting up digital channels for various models of LCD TVs:

1. Click on enter the menu - (green button)
2. Select in the menu - “Channel” (icon “Satellite dish”)

4. Select the signal source - “Cable”
5. Select - “Digital + analog”
6. Search mode – “Full”
7. Click - “Start”

First, we read the stickers on the back wall of the TV, where separately for each tuner (DVB-T and DVB-C) there is a list of countries in which, according to Philips, there are digital broadcasting(at the time of TV release, but if you update the firmware through their official website, then this list may change in subsequent firmware). If our country is not there, then we will have to put some other one from this list. For Philips TVs the step between frequencies should be eight. Search mode – “Full”

2. Select - “Configuration”
3. Select - “Installation”


6. Select - “Digital mode”
7. Select - “Cable”
8. Select - “Automatic”
9. Click - “Start”
Setup takes approximately 5-10 minutes.

Philips TV models 2011

1. Click on the icon - “House”
2. Select - “Installation”
3. Select “Search for channels”
4. Select - “Reinstall channels”
5. Select - “the country indicated on the sticker on the back panel” (usually France, Finland or Germany)
6. Choose digital mode– “Cable (DVB-C)”
7. In the “Network frequency” line, enter the frequency
8. In the “Transmission speed” line, enter “6875”
9. Next, select the line “Scanning frequencies”
Setup takes approximately 5-10 minutes.

1. Press the button - “Menu”
2. Select from the menu - “Options”
3. Select - “Auto-tuning”
4. Select the country - “France, Switzerland, Sweden or Finland”
5. Select the signal source - “Cable”
6. Select - “Digital”
7. Click - “Search”
Setup takes approximately 5-10 minutes.

If your TV model provides for the reception of digital channels, but does not have the “DTV MENU” item, then first select another country - France, Switzerland, Sweden or Finland.

1. Press the button - “DTV”
2. Click - “DTV MENU”
3. Select - “Installation”
4. Select - “Auto-installation”
5. Click - “OK”
Setup takes approximately 5-10 minutes.

Since not all SONY models are equipped with a digital tuner for cable TV (DVB-C), you need to check the model of your SONY TV. Models equipped with a DVB-C tuner are marked KDL-*EX* or KDL-*NX* - for example KDL-32EX402R2, the first 3 letters in the model name (KDL) indicate that the TV is “digital”. In models KLV-*BX*, etc. DVB tuners No.

1. Press the “MENU” button (for some models it is called “HOME” on the remote control (hereinafter referred to as the remote control). This button is usually blue.
2. Select the “Settings” item.
3. Find the “Digital Configuration” menu in the list of settings and enter it
4. Select “Auto search for digital stations”
5. A source selection window will open - select the TV connection type. Select "cable"
6. In the scan type selection item, select the “full scan” mode
Or select “Manual”
Next, enter the frequency
Leave the access code as “Auto”. Next, enter the symbolic rate
7. Click "start"

8. Wait until the TV finishes searching for channels.
pay attention to bottom part OSD menu Your TV. The bottom menu bar displays hints on which remote control buttons to perform certain actions in the TV menu.

Panasonic

1. Press the button - “Menu”
2. Select “Settings”
3. In the window that appears, select “Menu analogue.” settings"
4. In the window that appears, select “Add TV signal”
5. In the table that opens, put a tick in the “DVB-C” line and go below and click “Start auto-tuning”

After searching for all digital channels, going to the main menu in the “Settings” item, the line “Menu” appears DVB-C settings" By selecting this item, you can adjust the settings manually (set the frequency and speed).

The menu on your TV may differ from the model shown. In this case, you need to find tabs that are similar in meaning. If your TV asks for a search step, enter 8 MHz.

television/setting up_digital_channels.txt · Last changes: 2017/10/24 16:51 - tychina