New Navitel nm7 maps. Map update

Current GPS map of Belarus in vector format Navitel nm2. Works on all versions of the program – 3.2.6, 3.5, 5.0, 7.*, 8.*, 9.* New map, update date: 03/10/2018

Perfect for navigation in a car, as well as for cycling. The map of the Republic of Belarus shows both major roads and highways, as well as dirt paths and country roads. Thanks to the “routing” function, the map will help you get to the right place, taking into account turning restrictions and one-way streets.

The map displays many points of interest (POIs), for example: libraries, houses, hotels, gas stations, airports, shops, museums, car services, cafes, banks and many others.

The photo shows a fragment of a map of the Republic of Belarus, which shows highways, names of large cities and useful objects.
The map is frequently updated to keep it up to date.

Basic card functions

Search by address

The navigation map of Belarus for Navitel supports the address search function.
To find a building by address, first select the city, then the street name and house number.

Belarus, city Bobruisk, st. M. Gorky, house 38A.

Going by coordinates

On the map, you can go to an arbitrary GPS coordinate and show this location on the screen. If necessary, you can
get directions to this point.

Routing (routing)

One of the most useful functions maps of the Republic of Belarus for motorists and tourists - routing.
To build a more correct route, you can select the type of vehicle in the settings:
car, bicycle, pedestrian... Taking into account this setting, the optimal route will be laid out.

When planning a route, turning restrictions, speed on the road section, and one-way traffic are taken into account.
Complex junctions are displayed in 3D mode.

For ease of navigation around Belarus, you can enable voice guidance. A pleasant voice
will warn about upcoming turns, U-turns and other maneuvers.

While navigating given route the screen displays: current speed, distance
to the nearest turn, time remaining to finish, distance remaining and approximate time
arrival at the final point.

About the map

Belarus, official name - Republic of Belarus, official. abbr. Belarus is a state in Eastern Europe. It borders with Russia in the east, Ukraine in the south, Poland in the west, Lithuania and Latvia in the northwest.

Administratively, it consists of six regions, which, in turn, are divided into districts and may include cities of regional subordination. The capital of the Republic of Belarus is Minsk.

Satellite navigation map Belarus for GPS and GLONASS receivers. Suitable for all models of car and conventional navigators with the Navitel program. The most popular: Explay, JJ-Connect, Prestigio, Prology, Ritmix, etc. - you can download a map of the Republic of Belarus on them.

Download map

Map of Belarus (Republic of Belarus) for Navitel is free. Works on all versions of the Navitel program - 3.2.6, 3.5, 5.0, 7.*, 8.*, 9.*, no keys are needed for the card itself. Updated on average every two days. Latest version March 2018!

Screenshots:

Peculiarities:

  • detailed information
  • user-friendly interface

Description:
is a collection of the most detailed maps for GPS navigator, with all populated areas of the country. They also have street names, house numbers and symbols various objects that a person may need. It also contains special file with POI. In addition, the set of cards contains detailed information about industrial enterprises and the residential sector of cities, allowing you to find Right place By postal address. As well as information about road junctions, historical places, famous architectural buildings of Belarus and even the direction of movement of vehicles.
One of the most convenient functions program is automatic generation optimal route, moving along which motorists can use voice accompaniment, and if necessary, will very quickly respond to its change and lay a new one. Any car owner can install a set of maps on their car. Map of Belarus 2014 is compatible with Navitel 8.7, 9.2.0.4 and 9.3
How to install a Navitel card?
To do this, you need to register in the Navitel service and download maps for Belarus. The resulting access key can only be used for one car navigator. Since you will need an Internet connection to download, use 3G. This is a cheaper method and consists of downloading a torrent program file on our website. Download Map of Belarus for Navitel on Android and via Wi-Fi. As the others Navitel programs, Maps of Belarus 2014 on Navitel versions 8.7 - 9.2.0.4 and higher are different simple interface and the most accurate information.

New Navitel Navitel navigator for android free download latest version key and cards for Android

Navitel Navigator – autonomous system no navigation required mandatory connection to the Internet.
Maps are downloaded directly to the device.
Available to users detailed maps of Russia, Kazakhstan, Ukraine, Belarus and other countries, with support of the Navitel service.
Added Q3 2018 maps.
Traffic data is available on all maps.
Here you can download Navitel for Android does not require activation and Navitel update and fresh maps.
Built-in key for navitel, so the program does not need to be activated.

Name: Navitel Navigator / Navitel Navigation
Purpose: Navigation - traffic jams
Developer : CJSC "CNT" (Center of Navigation Technologies)
Year : 2019
Platform: Android OS
Version: 9.10.1996
Navitel key 9.7 - 9.10 Built-in
Interface language: Russian, English, etc.
Tablet: Cured!

Folder NavitelContent which should be placed in root directory devices or sd cards.
Also installation files for different screen resolutions.

1.Full version - (for all screen resolutions).
2.Normal version - (for phones). WQVGA400, HVGA, WVGA
3.Large version - (for tablets). WVGA800
4.xLarge version - (non-standard screen resolution). WXGA
5.Small version - (for QVGA, VGA screens). QVGA, VGA

For those who have modern devices, I advise you not to bother and install the Full version.
New!

Delete old version Navitela completely (Read the removal instructions)
Install the apk file. Use.
In the distribution there are 3 versions under different resolutions screen:
1. Navitel-full(for all screen resolutions)
2. Navitel-large(tablet)
3. Navitel-normal(smartphone)
Attention! The program will not install on top of the previous version; the key has changed.
1. Therefore you need to remove previous version Navitel (if installed) and delete Navitel Content folders from internal memory and SD cards.
2. Install apk, close the program and move necessary cards to the Maps folder(, located in the NavitelContent folder. From Android version 4.4+, the Maps folder on the SD card is located along the path Android/data/com.navitel/files/NavitelContent)
Maps can be downloaded from the program itself via Wi-Fi.

Another variant:

1. Download the files you need.
2. Drop the file onto your device anywhere and by any means file manager for Android, install it by clicking on the file (In the security settings of the device there should be a checkbox " unknown sources"). You may need to uninstall a previously installed version.
3. After installation, we launch the program and after the message that we need to download maps from the Internet, we refuse. The program closes and creates the NavitelContent directory.
4. Copy the required maps to the NaviTelContent/Maps subfolder.
5. We launch the program and use it.

Attention:
To make the program work with a directory NavitelContent on sd card devices from KitKat(Android 4.4 .x) and higher (that is, newer) without root,
then on external map(may be called /sdcard1, /extSdCard, /mnt/sdcard1 and so on.)
need to create a folder Android/data/ and it already contains a folder for the Navitel application - com.navitelfiles or in full: Android/data/com.navitelfiles/ , and in it already NavitelContent .

More details:
Full (full version) installed without problems and dances.
Can be installed on top of the previous version (if there was one)
If she stood trial version, which required a key, then delete it completely, clean the tails using the program SD Maid PRO Download .
After cleaning and uninstalling, you can install Navitel, downloaded from the links below.

We drop the apk onto the memory card (To install any.apk NOT from Android Market, you need to check the box "Unknown sources" in Settings ~ Applications ~).
- Using any file manager, launch it and wait for the installation to complete.
- After the first launch, the program will create a NavitelContent folder on the memory card.
- You can copy maps to the NavitelContent/Maps folder. (Actual up to Android version 4.3. For later versions, read a little higher)

We remove the previous version correctly:

Through Settings->Applications->Navitel->Clear data->Stop->Delete

With internal and external memory delete the entire NavitelContent folder, or simply rename it if you need to reserve some files.
We launch any program to clean the smart phone and reboot.
An excellent program for cleaning up garbage and in particular for removing Navitel completely, download: SD Maid PRO Download
Usually this helps and it turns out to install Navitel again normally.
If there are problems and conflicts again, then we do the same as above, plus, through Root Explorer let's go to data->data and delete the folder com.navitel(Root file system data/data/com.navitel, but you can get there ONLY if you have root rights).
In all cases for complete removal you need to destroy the NavitelContent folders on both the internal memory and the SD card.

P.S. On Lenovo You may also need to delete the file along the path: /preload/vendor/app/com.navitel.apk

In all other cases, either the problem is in the phone (display resolution does not match), or in the firmware, or the problem is in the code of Navitel itself, but these are questions for the developers.

The updated version of the program provides instant routing. Q2 2018 release cards take up less space on the SD card or device memory while maintaining high degree details..
There is a map of Crimea in full map Russia, and on the map of Ukraine! There is no separate map of Crimea in nm7 format!
Abkhazia is part of the map of Georgia.

Note :

So that the cards work after being placed on a flash drive, you need to take into account the version of Android installed on your device and the model of the device itself.
The paths can vary and look like this:
1. For Android BEFORE version 4.4: SD Card/NavitelContent/Maps/ .

2. For Android 4.4 and higher, up to version 6, the path to save maps is different: SD Card/Android/data/com.navitelfiles/NavitelContent/Maps .

3. For Android 6 and above: SD Card/Android/data/com.navitel/files/NavitelContent/Maps

In order for these paths to appear, you need to install Navitel and launch it once until it asks for maps,
after which you exit Navitel and the paths (folders) will already be created upon first launch. Place the cards there.

Sometimes users install Navitel and maps, everything works fine,
but then there is a need to add a map, they download it, throw it into the folder with maps, but it (the downloaded map) is not displayed.
This happens because the maps are already indexed and new map Navitel doesn't see it.

In order for Navitel to see the downloaded map, you need to re-index all maps.
To do this, you need to delete the file index.XXX.nti, (where XXX is any three digits), in the folder with maps ( Maps),
delete when the Navigator is turned off, using any file manager, or via a cord from the computer.
Leave the cards. Delete index file only.
Then launch Navitel and the maps will be indexed again.





Attention! The program will not install on top of the previous version, or it will not install correctly, the key has changed.
Therefore, you need to uninstall the previous version of Navitel (if installed) and delete the Navitel Content folders from the internal memory and SD card.

Navitel navigator for Android, the key is already built into the program
Download Navitel for Android for free key and maps for navitel Android
New!

2019 v 9.10.1996


Albania, Andorra, Armenia, Austria, Azerbaijan, Columbia, Belarus, Belgium, Bosnia and Herzegovina, Brazil, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Georgia, Germany, Gibraltar, Greece, Hungary, Iran , Iceland, Isle of Man, Italy, Kazakhstan, Kyrgyzstan, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Maldives, Malta, Mexico, Moldova, Monaco, Montenegro, Netherlands, Norway, Peru, Poland, Portugal, Philippines, Romania, Russia , San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tajikistan, Turkey, Ukraine, United Kingdom, Uzbekistan, Vatican

Version Navitel Normal for cards Q3 2018

Version Navitel FULL for cards Q3 2018(Instructions and key inside the archive)

Are you using the Navitel navigator, but have started to notice problems with the application or route planning, or a section of the map is not informative enough? The card or program is probably outdated. To fix the problems, you need to perform an update. In the article we will talk in detail about how to update the Navitel navigator on devices running Android control and in car navigator.

Methods for updating the program

On Android devices

The update is performed in two ways:

  • In the app store Google Play.
  • Complete reinstallation.

For the method with using Google Play, you should visit the application store and force the update of the utility if automatic updating is disabled. However, this method is not suitable if you install the utility from other sources.

A complete reinstallation involves removing and reinstallation applications. This action is required if Google Play crashes or the program was installed from other sources, for example from the official Navitel website.

On a car navigator

There are 2 update methods available:

  • Using the Navitel Navigator Updater program.
  • Via the official website.

The Navitel Updater method involves installing the program on a PC. Then the navigator is connected, after which the automatic installation and setting. The utility also allows you to update maps.

When using the site, you should download the archive with new files and install it manually.

Methods for updating maps

For navigators and Android devices

  • From the navigation application menu.
  • From internal or external storage.

When using the “from the application menu” method, it is enough to provide the navigator/Android device with access to the Internet. Then go to the appropriate section and update the files.

Downloaded maps using a PC should be transferred to the navigator’s memory or mobile device. Afterwards, update through the program, indicating the path to store the cards. On a car navigator, new maps are updated automatically.

Instructions on how to update the Navitel navigator on Android

Using the Google Play app store

  1. Open shop Google applications and show the hidden menu.
  2. Select "My apps and games".
  3. In the “Updates” tab, find the application and click update.

The absence of a program in the list indicates the presence of a current version.

Complete reinstallation

  1. Uninstall the application.
  2. Using a file manager, go into memory and clear residual files.
  3. Download and install. During installation, you should allow installation from unverified sources, and then return the original values.

Instructions on how to update Navitel maps on Android

From the navigation application menu

  1. Open main menu.
  2. Select the item “My Navitel”.
  3. In the new window, click on “Updates”.
  4. If there are updates, it will appear Additional Information with a description and an “Update” button.

Installation from device memory

  1. Delete previously installed cards. The standard location of maps is in the Maps folder, NavitelContent folder.
  2. Upload the downloaded maps to the directory where the previous maps were stored.
  3. Open the “Main Menu” of the application, then the “Settings” item.
  4. Next, select “Other cards”.
  5. In the new window, click “Add atlas”.
  6. Specify the folder with maps. To simplify navigation, you should navigate by folders containing the globe icon.
  7. Select the map file, after which the atlas will launch automatically.

Instructions for updating the application in the navigator

How to update Navitel navigator via computer

Perform the installation following the instructions of the installation wizard.

Launch the program and connect the device to the computer in removable storage mode.

Execute backup available files.

If there are updates, the utility will offer to download and install new files, including maps.

After confirmation, the operation will be performed automatically.

Update via the official website

  1. Go to your personal account.
  2. After authorization, select the section with the added devices and check for updates.
  3. Connect the navigator to the PC using a synchronization cable.
  4. Make a backup.
  5. Download the archive with updates for the corresponding device to your PC. Unpack the archive and then move the files to the device memory.

Instructions on how to update maps on your navigator

From the application menu

The algorithm of actions is the same as for devices running Android OS. You need to launch the navigation program, select “Menu”, then the “My Navitel” section, and then the “Updates” item. Click “Update All” and then confirm the download of the maps.

Important! You must provide the device with Internet access.

Using a computer

Important! Before installing maps, you need to update the version of the program on your device.

Algorithm of actions:

  1. Download maps in personal account from the Updates menu.
  2. Connect the device to the PC via a synchronization cable.
  3. Clear the directory with maps, then place the downloaded maps.
  4. Disable the device. Maps will be updated automatically after the first launch of the program.

Conclusion

To update the Navitel navigator or maps, you should use the automatic or manual method. Automatic update lighter and contains less additional actions, What suitable for beginners. Manual method aimed at advanced owners, or if automatic method does not work for various reasons.