The operating system configuration is essentially the computer settings that can be damaged. This usually becomes possible due to the impact of software or through failures in the OS itself. In this case, there is a need to restore the computer to its original state.

In practice, the situation with computer settings is mainly resolved by rolling back the system to a particular date associated with some event within the operation of the computer. This refers to so-called recovery points, which can be created either automatically or manually. Therefore, it is advisable to take care in advance to create a snapshot of the system at a certain moment when it had acceptable performance.

In any case, the question is “how to restore computer settings?” is solved by choosing a different return point, which is achieved using the example of the “seven” as follows:

• go to the Start menu;
• selecting the “Control Panel” item and then clicking on the “System and Security” line;
• search at the beginning of the proposed list for the “Restore the previous state of the computer” link, click on it to open a window where you should be interested in the “Start system recovery” button;
• activating this button will cause the following window to appear with two items: with a recommended recovery option and with an independent choice of returning to a specific date;
• select a restore point, then click “Next” and in the next window – “Finish”.

As a result of the above actions, you can restore your PC settings to the time when the system was working properly.

System Restore: how to enable?

Your computer's settings cannot be locked to a specific date if System Restore is disabled. To check the state of the PC within the framework of the proposed problem, it is necessary, using the example of the same “seven”:

• go to the Start menu;
• right-click on the “Computer” line;
• select the bottom line of the menu that opens – “Properties”;
• on the left side of the window that opens, click on the “Advanced system settings” link;
• open the “System Protection” tab;
• make sure that in the line with the name of the hard drive, the protection has the “Enabled” option;
• otherwise, click “Configure”, select the recovery option, set the disk volume for the recovery points and click “Apply”.

Advice: if you decide to clean the registry, do not forget to create a restore point, since even in case of serious failures due to inept actions, you can use safe mode to log in, which is usually called by pressing the F8 key during boot start, to fix everything .

pauk-info.ru

Windows 7 System Restore

Most often, the function of restoring the computer to a working state is required if some program was installed and after that the system began to slow down. You should also restore the system to an earlier state if the computer was subject to a virus attack. In most cases, the computer is infected or littered with programs so much that the recovery operation can only be performed from safe mode. How to boot the computer in safe mode - when you turn on the computer, press F8 and select “safe mode” from the menu that appears.

So, I will briefly describe the recovery procedure in the Windows 7 operating system. Right-click on the “computer” icon (desktop) and go to the last item “properties”. In the window that appears, select “system protection”.

At this stage, we need to make sure that data recovery on drive C is enabled on your computer. If the function is enabled, proceed further by clicking on the “Recovery” button.

The System Restore window will appear. Here I recommend selecting “Select a different restore point.”

And here you are already estimating the approximate date when the computer began to slow down. Here, opposite the dates, it will be indicated which programs were installed, which will also greatly help you when choosing the operating state of the system. Be sure to check the “show other restore points” checkbox to display all recorded restore points.

Restoring the system to a working state

The next window is for informational purposes, check the selected date and click on the “Finish” button. Next, we confirm the start of the recovery operation.

We smoke for a few minutes, drink coffee, and don’t touch anything. After the system reboots, you will see a message indicating that the system was restored successfully. If you are still not satisfied with the state of your computer, try rolling back the system to an earlier date. Let me remind you that this action does not affect your files, such as photos, videos, etc. The restore only affects Windows system files, programs, and the registry.

For advanced users, there is a more reliable and interesting option for creating a Windows backup and restoring the system, which requires the ability to work from within the BIOS.

webwulpix.ru

Restore your Windows 10 computer to its previous state

Windows 10's new reset and file backup tools help out in many critical situations by preventing data loss, but they don't have the same power as Windows 10 System Restore, which reliably protected all your computer data in previous versions of Windows.

Luckily, Windows 10 still supports Windows 10 System Restore, and you can use it to protect any and all data on your computer, not just user files and settings, if needed. To return your computer to a point in time where it was stable and performing better than when it crashed, follow the instructions below.

1. Right-click the Start button and select System from the context menu. In the window that appears on the screen, go to the System Protection section (in the left panel). Finally, in the System Properties dialog box, click the Repair button. The System Restore dialog box will appear on the screen.

2. Click the Next button in the System Restore window. The next page of the window will present a list of available restore points.

3. Click one of the restore points provided. To display more recovery points, check the Show other recovery points option at the bottom of the window.

4. Click the "Search for Affected Programs" button to see how restoring the system to a specified point will affect installed programs. By carefully reviewing the information presented in the window, you will determine the programs that will need to be reinstalled after restoring the system.

5. To confirm the restore point, click the Next button. In the next window, click the Finish button.

After a short reflection, the computer will return to the previous state in which it (hopefully) remained normal. If your computer is already working fine, you can manually create an additional restore point, as described earlier. Give the recovery point a name that most accurately describes the state of the computer in it, for example, Before the neighbor arrived. Naming recovery points is a good practice to keep the data stored on your computer safe from any trouble.

Today I want to describe a rather broad concept as system recovery. Moreover, this concept we will cover all versions of Windows, consider all known recovery methods starting from the standard program and ending with the recovery console. We will take into account not only desktop PCs but also laptops, because the latter have their own unique and very convenient recovery utility!

I have already described detailed articles about system recovery on all Windows systems, in different ways, on computers and laptops in the section « » , but all this is not the same. I would like to write an article that will be divided into several subparagraphs, so to speak “all in one place”

So let me list the points that you can navigate and by clicking on it, you can immediately see exactly what you need:

Go!

1. Restoring Windows XP, 7 and 8.

Let's start with the simplest, because if this method helps you, then you won't have to strain yourself once again and try to restore your computer to normal using more sophisticated methods.

In order to launch the “System Restore” program, you need to go to the “Start” menu, then select “Programs” or “All Programs”, (depending on who) then select “Accessories”, then “System Tools” and “System Restore”.

For Windows 8, it’s easier to search for “System Restore” and find what you need. Next, everything should be done as described in this

1. Restoring Windows from the command line.

This action will help you if the computer does not boot in normal mode. It happens that it hangs or even comes out You can avoid all this by restoring the operating system from the command line. You can find out more about this procedure

1. How to restore the system using the recovery console.

This procedure, which is (as I understand) only available in Windows XP.

Using it you can restore a damaged boot record, etc., etc. Full instructions on this issue await you

1. How to restore Windows on laptops using the special Recovery function.

This function is available only to laptop owners and this is their undoubted advantage.

This recovery method consists of returning the computer to the stage at which it was at the time of purchase in the store. That is, All settings, passwords are reset, all data, programs, etc. are deleted. Upon completion of this operation, you will have a fully functional laptop. (For those who do not know how to restore an operating system or it, this function will be a definite plus) The disadvantage of this function is that if you have already reinstalled Windows (yourself or in a service center), then most likely the partition of the disk on which that recovery program was written has been deleted , so your laptop is now “on par” with a desktop PC. You can read about how to properly restore Windows to factory settings For example, one of the laptop models is disassembled, but these recovery programs are like 2 drops of water similar to each other (the color and design most often change) so Don’t worry, I think you can cope with this task.

1. Restoring the operating system using a recovery disk (for seven and higher).

This disk is capable of returning your OS to a working state if any errors, failures, etc. occur during operation. This mainly happens due to viruses, as well as due to incorrect installation of programs. Most often, this method is suitable in the case when the disk has already been created in advance and is lying on the shelf, and Windows has just crashed. Only in this case will you be able to restore it to the moment when you recorded this disc. Read more about this

1. “Loading the last known good configuration (with working parameters)” (for XP) and also “Last Known Good Configuration (additional) (for seven and higher).

Alternatively, if the OS does not boot in normal mode, you can try pressing the F8 key when you turn on the computer (for laptops everything is more complicated. I have come across laptops in which a special menu is called up using other keys from F5 to F12. You will have to experiment a little I would like to find out which key is responsible for this.) and the corresponding window should appear:

Here you can try selecting for XP: “Load last known known configuration (with working parameters)”, and for 7 and 8: “Last known known configuration (advanced).

Sometimes this function helped me =)

1. Troubleshooting computer problems (for seven and above).

If you have seven or higher, then there is another option for you to restore the system. When you turn it on, you will also need to call up a special startup menu (how to do this is described above) and then select “Troubleshoot computer problems.” Everything that will happen next is intuitively clear even to a first grader. The following window will appear:

As we see here we have 5 tools that can help us restore Windows:

1. Startup recovery.

If the boot record of your OS is damaged and when you turn on the computer on a black screen it writes an error like the one in the picture below or something similar, then this is what you need

This is a normal return of Windows to a previous state, where everything worked more or less adequately. We considered such a restoration at the very beginning of our article - this is point 1.

1. Restoring the system image.

This function allows you to recreate the system from an image that you made earlier and you have it somewhere on your hard drive. Below, in paragraph 8, we will look in detail at how to create this system image and, of course, how to recover from it.

1. Windows memory diagnostics.

You may have a problem with your RAM. This often causes the computer to freeze and display a blue screen of death. This program will help you find out how your RAM is doing and whether it should be replaced.

In principle, this is a universal remedy. Using it (by entering special commands), you can, for example, start system recovery or format your hard drive. A very necessary thing.

1. How to restore an operating system from an image.

Let me first tell you how to create this very system image. It must be prepared in advance, so to speak, for a “rainy day” when the system completely fails.

Go to the “Start” menu, select “Control Panel” and in the “System and Security” item select “Back up computer data”

After this, you should select the hard drive where you want to save this system image. It is advisable to save it somewhere where the operating system itself is not located.

In the next window, the disk on which Windows itself is installed will be selected. Just click “Next”. Another confirmation window appears. Feel free to click “Archive” and the image creation process will begin.

Now, after the image creation process is completed, you can always restore your previous version of the system.

Note: I created the image on Windows 7. On XP and 8, the process is not much different.

Starting a system restore from an image is very simple. All you have to do is press F8 when you turn on the computer (how to do this is described above) then select “Troubleshoot computer problems”. System recovery options will open (all of them are described above) Here you need to select item 3 “System image recovery”

In the next window, simply click the “Next” button

After this, system recovery from the image will begin. Naturally, all data located on the system disk will be deleted and the system will be written there. If you don’t know how to save all your data before restoring the system, then

Phew! Damn, how much have I written here. I have listed absolutely all the methods for restoring systems that are currently known to me)) Maybe, of course, I missed something. Write your questions in the comments. I will be happy to answer them! Thank you for your attention! Good luck!

You can rollback your computer for many reasons, for example, you reinstalled the drivers, but they don’t work properly, or you installed a lot of programs and games, many of which were installed incorrectly, or you made an update after which the system didn’t work properly, or Windows simply won’t start. This can be done in different ways. Some methods by which you can roll back and restore the system are universal, and some are suitable specifically for a specific reason.

How to roll back to a restore point

If Windows does not start on your computer, then this method is not suitable, but it is suitable for rolling back the system to Windows after installing games or programs, after an unsuccessful experiment with the settings in the system, after an unsuccessful update or after removing drivers. A restore point is created automatically, usually after installing a program, but you can create a system restore point manually. To see all your restore points, you need to open them by simultaneously pressing two WIN+X keys on your keyboard. A context menu will open in which you need to select Control Panel.

Using the Control Panel you can roll back your Windows 7 system

In the Control Panel window that opens, enter the word in the search field recovery. After this you need to click on Recovery which appeared at the very top of the Control Panel.

By selecting this item you can roll back the Windows system.

In the next window there will be several items, and you need to click on the item Starting the recovery system to roll back your computer. If you need to create a restore point manually, then you need to click on the System Restore Settings item and in the next window click on the Create button located at the very bottom of the window. A new Restore system files and settings window will open in which you need to click Further.

Windows 10 rollback point

In the next window, Restoring the computer to a previous state, to restore the computer retroactively, you need to check the box Show other restore points. Then click on the date when everything was fine with your computer and click Further. After this, perform a system rollback and after rebooting, the computer will return to the state of the selected date.

How to roll back from Windows

This method, like the previous one, is not suitable if Windows does not start. Using this method, you can roll back the system to factory settings with the loss of all data or partial loss of data. As in the first case, open the Control Panel and go to the Recovery window.

To open computer settings, click on the last line

In this window you need to click on the item If your PC is having problems, you can restore it in PC Settings. After this, a window will open on your computer Computer settings on the tab Recovery.

Windows 8 system rollback

There are three recovery options on this tab:
Recover your computer without deleting files. In this case, after restoring the system, files and all programs will be lost except for files located in the system folders Music, Video, Documents, Downloads and Images, and programs and applications that were installed from the Windows Store will also be saved.
Removing all data and reinstalling Windows. In this case, a clean reinstallation of the system will occur and all files will be deleted from the system disk and you will have to perform data recovery after reinstalling the system.
Special download options. In this case, you will need an installation disk that was used to install the system on your computer.
After selecting the desired option, click Further, and after going through the recovery procedure you need to reinstall your favorite programs.

System Restore via Command Line

Usually they do a system restore if Windows stops starting on the computer. This method is also called system recovery via BIOS or system recovery via cmd. To start rolling back the system through the BIOS, you need to press the Start button on your computer and immediately hold down the F8 key on the keyboard, and when the boot menu appears, release it.

How to restore a computer via BIOS

Next, to restore the system via bios, you need to select the item using the arrows on the keyboard Safe Mode with Command Line Support and press ENTER on your keyboard. A command line will open in which you need to enter %systemroot%\system32\restore\rstrui.exe and press the ENTER key on your keyboard. After this, the system rollback will begin in safe mode. When the system rollback is completed via the command line, you will need to restart the computer and it will start in normal mode.

Mar 3 2015

How to restore Windows 7 on a laptop, a black screen appears when booting, the recovery environment does not work, I deleted all hidden partitions, there is no original disk with Windows 7.

I spent a lot of time, tell me what to do now, or at least how to insure myself against such situations in the future, preferably without using paid data backup programs.

How to restore Windows 7 system

Unfortunately, there are many reasons for this problem, ranging from incorrectly written drivers, harmful effects of a virus, file system errors and ending with our erroneous actions when working with a computer. There is no need to be afraid of such problems, you need to learn how to deal with them effectively.

Let's think about how to restore a Windows 7 system, and also insure ourselves in the future against possible troubles using the backup and recovery tools built into the operating system.

We will learn how to restore Windows 7 without using third-party backup programs, even when System Recovery Options do not load and the F-8 button is useless.

It has in its arsenal a fairly powerful and good tool -> Recovery Environment, which is created automatically when installing Windows 7 in a hidden partition and contains five other tools that solve numerous malfunctions and problems.

Note: If you learn how to use Windows 7 recovery tools correctly, and this is not difficult, then you can do without additional and paid data backup programs.

You can launch the recovery tool by pressing the F-8 button on the keyboard immediately after starting the computer. After this, a menu will open in front of you: Additional boot options: Troubleshoot your computer, then Safe Mode, Safe Mode with loading network drivers, etc.

A small digression: Before selecting Troubleshoot your computer, try the simpler option - Last Known Good Configuration - in simple words, the operating system always remembers the last successful boot of the computer and enters this information into the registry.

If there are problems loading, Windows can remember the registry settings and driver settings that were used when the system was last successfully booted and use them if you select the Last Known Good Configuration option.

If this tool does not help, select the first -> Troubleshoot computer problems.

Next, we get to the Windows 7 System Recovery Options menu, this is what we need, this is where we can select the System Restore Tool we need, there are five of them in total, let’s take a closer look at how they all work.

The first thing to do is apply Startup Repair (Automatically fix problems that prevent Windows from starting).

Required digression: After pressing the F-8 button when booting the computer, you may not have the item > Troubleshoot your computer, but only Safe Mode and so on, the question arises why.

When installing Windows 7, a recovery environment partition is created automatically and is located in the root of the drive (C:) in the Recovery folder. You can also see in the Disk Management window - a separate, hidden partition of the hard drive, its volume is only 100 MB, it is used to store boot configuration files (BCD) and the system bootloader (bootmgr file).

You can see it under Computer->Management->Disk Management. Under no circumstances should you delete this partition (many people delete it out of ignorance), otherwise you will not have the recovery environment start, that is, you will not have the Troubleshoot your computer option, and in more severe cases, you simply will not boot the system.

In the lower screenshot you can see another hidden partition, with a capacity of 9.02 GB, this is a hidden recovery partition with factory settings on my laptop, yours may be larger or smaller. It’s also better not to delete it; if necessary, you can always restore Windows 7 from it.

What should you do if you do not have a partition with a recovery environment and when you press the F-8 button in the Additional boot options menu, the Troubleshooting computer option does not appear? How then to restore the Windows 7 system?

An installation disk with the Windows 7 operating system can help here. You can run the recovery tool by booting from the original Windows 7 installation disk, selecting System Restore at the very beginning.

If you don’t have an installation disk, then you can use the Windows 7 Recovery Disk (you can make it in any running Windows 7) in five minutes, then you can also boot from it and do the same.

So we finally got to the System Recovery Options, either using the F-8 button and the Troubleshooting item, or the Windows 7 installation disk or the Windows 7 Recovery Disk.

In the System Restore Tools Selection menu, select the first one:

Startup recovery-> there will be an analysis of faults that interfere with the normal loading of Windows 7 and their further correction for the normal loading and functioning of the operating system.

During the process, we may be warned that problems have been detected in the boot parameters, click Fix and restart.

System Restore-> using this function we can select a previously created system restore point, if we have it enabled, and roll back to the time when our Windows 7 worked and loaded perfectly, everything is simple here.

Restoring a system image-> I personally use this tool; if used skillfully, it can replace paid data backup programs. If you are interested, read on.

What's good about it? It will help when you don't have the original Windows 7 installation disk and you've deleted the hidden partition with your laptop's factory settings, but that's not all.

Sometimes there are situations when, for various reasons or due to the actions of a virus, you will not be able to boot the operating system at all, or many people ask How to restore the Windows 7 system, even if the menu with Additional boot options is also unavailable. Should I reinstall the operating system again?

Therefore, immediately after installing Windows 7 on your laptop or computer, using this function -> Restore system image, we create an archived image of our Windows 7 on the hard drive, and take care of it.

You must create a Windows 7 Recovery Disk (read below), it will help you use the System Image if the Advanced Boot Options menu does not load.

Go to Start -> Control Panel -> Back up computer data.

Select “Create a system image”.

In my case, Local disk (E:), if you have several hard drives in the system unit, then of course it is better to place the backup on the hard drive where the operating system is not installed.

By default, the data archiving program will automatically select a partition with the Windows 7 operating system; if you wish, you can add Local disks for archiving, as long as you have enough space.

Note: You may notice that I have two operating systems installed on my laptop, so the archiving program selected two Local disks.

Click Archive and the process of creating an archive with our Windows 7 will begin.

Created, it will look like this.

Now, if necessary, you can deploy the archive with Windows 7 to your computer in 20-30 minutes. It would be better if you additionally copy the archive with the system onto a portable hard drive, this will doubly protect you.

Let's imagine that we can't start Windows 7 and deploy the backup we created, let's do it together.

We launch the Windows 7 Recovery Tool by pressing the F-8 button on the keyboard immediately after starting the computer.

The Advanced boot options menu opens, select Troubleshoot your computer.

Restoring a system image

Use the latest available system image.

Of course, all our data on the Local Disk, where the operating system is now being restored, will be deleted, so you can first boot from any Live CD and copy what you need.

How else can you restore your Windows 7 system? Of course, using the Windows 7 Recovery Disk.

Let's create one that can be used to boot the computer; it will contain recovery tools that can be used to repair Windows 7 boot problems, as well as restore the operating system from the backup copy that we created in advance.

Important: For a recovery disk, the bitness of the system is important, you can use a 32-bit recovery disk for any 32-bit Windows 7, and a 64-bit recovery disk for any 64-bit Windows 7.

Let's go again Archiving computer data.

Create a system recovery disk, insert the DVD into the drive, click “Create disk”.

When the Windows 7 Bootable Recovery Disk is ready, put it in a safe place.

To restore Windows 7 from a Recovery Disk, you basically don’t need any working operating system at all.

You will only need to change the boot priority to the disk drive in your computer’s BIOS, insert a recovery disk into it and restore your Windows 7 using the archive.

Many here can draw an analogy with data backup programs, and this is correct, they work on the same principle, only their functionality is, of course, more convenient.

Recovering Windows 7 from a Recovery Disk. I show you how to do it. Let's say we're in trouble, we can't start Windows 7, when we press F-8 on the keyboard immediately after starting the computer, nothing happens.

We cannot get to the menu with Additional boot options and an error message is displayed. In this case, the system archive on the hard drive is not available to us. This is exactly the kind of trouble that happened to our reader Ilya, who wrote us a letter asking for help.

In this situation, many people reinstall Windows 7 from scratch, but not you and me, because we have a System Recovery Disk.

We insert it into the drive and reboot, set the BIOS to boot from the drive, as I said, the disk is bootable, the System Recovery Options program starts.

Press Enter until the prompt to boot from the disk disappears.

Automatically, the recovery tool running from the disk will try to restore Windows 7 to start.

If nothing works, select any tool, for example, try Restoring a computer using a previously created operating system image.

We use the latest available system image.

What other ways are there to restore Windows 7?

There is another little-known way to restore Windows 7 boot after a failure, and I’ll tell you about it. At first glance, it may seem difficult to many, but nevertheless it often helps me out.

The fact is, friends, that a very large part of the problems due to which you cannot boot Windows 7 lie in registry errors. And Windows 7 would not be Windows 7 if it did not have a mechanism that protects registry files. Such a mechanism exists and creates backup copies of the registry in the RegBack folder every 10 days, regardless of whether you have system recovery enabled or not.

If you cannot solve problems loading Windows 7, you should try replacing the existing (and apparently damaged) registry files from the Config folder with archived files from the RegBack folder. To do this, we will have to boot the computer from the Windows 7 installation disk or the Windows 7 recovery disk.

Boot into the recovery environment and select the command line.

We type in it - notepad, we get into Notepad, then File and Open.

We go into the real explorer, click My Computer. Now we need the system drive C:, pay attention, the drive letters here may be mixed up, but I think you can recognize the system drive C: by the Windows and Program Files system folders located inside.

We go to the folder C:\Windows\System32\Config, here are the active registry files, specify the File Type - All files and see our registry files, we also see the RegBack folder, in which every 10 days the Task Scheduler makes a backup copy of the registry keys.

So, we will replace the current registry files from the Config folder with backup registry files from the RegBack folder.
So, first of all, let’s delete from the C:\Windows\System32\Config folder the files SAM, SECURITY, SOFTWARE, DEFAULT, SYSTEM, which are responsible for all registry hives (my advice is to copy the registry hives somewhere before deleting, just in case).

In their place, let's copy and paste files with the same names, but from the backup copy, that is, from the RegBack folder.

Note: The SAM, SECURITY, SOFTWARE, DEFAULT, SYSTEM files cannot be deleted all together; delete them one by one. Then copy the same files from the RegBack folder in their place.

Friends, if this does not help, use Windows 7 file integrity recovery; if the operating system does not boot, it is done in exactly the same way as in Windows 8.

What else do we have left of Windows 7 recovery tools?

Memory diagnostics 7-> checks system memory for errors. Command line-> using it you can delete files that interfere with loading Windows 7.

I hope our article on how to restore Windows 7 system helped you.

In the last article we looked at how to make a Windows restore point. Now we will learn how to restore the Windows system from this point. If you have not yet read the previous article, I advise you to do so. We all, sooner or later, install some unknown crap on our computer, and at our own peril and risk. Without thinking about the consequences, we install various programs on our PC in order to test their “wonderful” ability to do something incredible (as we are assured before downloading the program).

RESTORING AND RETURNING WINDOWS 8 TO THE ORIGINAL CONDITION

Before the release of the Windows 8 operating system, returning a computer to its original state was neither easy nor quick. But now, with the help of new features, this can be done in minutes. I can’t even believe it, right? However, this is one of the best features of Windows 8.

At work, I have to constantly test various programs, so my computer needs regular maintenance.

WINDOWS 7 SYSTEM RESTORATION

Most often, the function of restoring the computer to a working state is required if some program was installed and after that the system began to slow down. You should also restore the system to an earlier state if the computer was subject to a virus attack. In most cases, the computer is infected or littered with programs so much that the recovery operation can only be performed from safe mode.

SYSTEM RESTORE IN WINDOWS 7

Hello, I have already written an article about how to enable system restore and how to create a restore point. Now is the time to write about how to perform a system restore in Windows 7. To put it simply, now I will write about how to perform a system rollback.

If you have some kind of problem with your computer, for example, it has become very glitchy, or even worse, it won’t start at all, then the first thing you need to do is to try a system rollback, thereby we will return the settings and system files from the backup that was created for example two days ago, when the computer was still working normally.

This is a good opportunity to quickly repair your computer and return it to normal operating condition.

WE DO SYSTEM RESTORATION ON ALL VERSIONS OF WINDOWS ORDER A TECHNICIAN BY TEL

You can return your computer settings to WindowsXP using the “System Restore” item. In order to do this thing on your computer, you need to reboot and, pressing the F8 key, wait until the boot menu appears in which you need to select “Safe Mode”, then confirm the computer is running in this mode and follow the path “Press Start - Select programs - click standard - click service ones - and finally we click on system restore.”

INTEGRATION XXI CENTURY

Many manufacturers of computers, laptops and netbooks install hidden partitions with the installed operating system and factory parameters (settings), programs and drivers to restore Windows in the event of a system crash, constant blue screens of death, user deletion (due to inexperience) of necessary system files, or improper shutdown services, infecting your computer with viruses, installing a new OS, etc.

HOW TO RESTORE WINDOWS 8

To quickly restore Windows 8 using the Reset or Refresh functions. you need a recovery partition on your hard drive. It is usually included in the basic installation. See below for how to check.

If there is no sector, then you will have to use either an installation disk or a recovery disk (disc recovery), or download and create it, or use other functions and methods without a disk.

HOW TO RESTORE YOUR LAPTOP TO FACTORY SETTINGS

Restoring a laptop to factory settings is necessary in many situations. Many problems arise due to Windows crashing or the system being clogged with unnecessary programs.

Almost every laptop (except for completely old models) has a hidden system recovery. Under no circumstances should the folder called “Recovery” be deleted.

It stores important information about your system.