Safe mode on samsung phone. How to disable safe mode on Samsung: methods and steps

A new smartphone or tablet based on Android always works without failures or glitches. But what to do if, in further use, the device suddenly “slows down”, its speed slows down, applications do not work correctly, the sensor reacts unstably? Such problems can be resolved by enabling Safe Mode. On a device running Android, Safe Mode will make it possible to determine why problems are occurring.

If the phone works normally in safe mode, then “glitches” with it occur due to some application.

How to enable: 3 ways

Of all the inclusion methods, the most relevant are perhaps the following:

Method 1

Method 2

1. Turn off the phone.
2. When an inscription corresponding to the name of the smartphone brand or the inscription Android appears on the display, you must press the volume up button.
3. In this case, after turning on, the words “Safe Mode” will appear at the bottom of the screen.

Method 3

If the above methods do not work, then try this:

1. The device needs to be turned off.
2. While booting, hold down the Volume Down button.
3. After this, safe mode will be activated.

Note: in some versions of Android, to switch to Safe Mode, you need to restart your smartphone manually, and when the operating system logo appears on the screen, you need to press the volume up and down buttons and hold until the device boots completely.

How to disable: 2 options

No less pressing is the issue of disabling safe mode. Before this, you need to restart the device, and then use one of the suggested options.

First shutdown option

1. The phone turns on, after rebooting, Safe Mode is automatically disabled.
2. If safe mode is not automatically reset, you need to uninstall the last application that was installed; to do this, select Settings from the application menu.
3. When you select this application, you will be offered the Delete option. This is precisely the point that needs to be touched upon.
4. After completing these steps, reboot your device.

Second shutdown option

If the first method did not give the desired result, then you can try the second method - resetting to factory settings:

1. First, you need to select Settings from the menu, and in the menu that opens, tap Backup and reset settings.
2. In the proposed menu, select Reset to factory settings, then Reset smartphone/tablet.
3. Delete everything. After this, the device will be as good as new. But, keep in mind that all installed applications and personal data will be deleted. Only the factory settings installed by the manufacturer will remain.

Thus, Safe Mode loads only the required number of programs and utilities, only the necessary components. It is for the security of user data that the manufacturers developed the above mode, and applications will only work those installed by the device manufacturer. All other programs that were installed by the user themselves may pose some threat and will therefore be disabled.

Even if serious problems occur in the phone, and in standard mode it no longer performs its basic functions, it can still work in safe mode. For example, if the battery starts to discharge too quickly or the call button does not work, before sending such a device for repair, you can check its functionality in this service mode.

The Android platform is democratic and allows the user to make changes to system files, which is fraught with consequences, such as unstable operation of the device or termination of access to applications. To identify and troubleshoot problems, developers have created the ability to turn on the phone in safe mode, when only pre-installed applications are opened. Read our article about how to boot your phone or tablet into safe mode.

How to enter safe mode on Android before 4.1

On a smartphone with a version lower than 4.1, you can enable safe mode in two ways.

First way

Video: how to start your phone in safe mode on Android up to 4.1

Second option

Turn off and on your smartphone, and when you see the manufacturer’s logo, press and hold the “Menu” button until the main screen appears.

How to enable safe mode on Android 4.1 and higher

In versions of Android 4.1 and higher, rebooting into safe mode occurs at the moment of shutdown. Sequencing:

If the above method does not work, try repeating the steps, but after the menu appears, hold down the “Reboot” item for two to three seconds. On devices flashed with MIUI, to enable safe mode, you need to turn off the device, and when turning it on, press and hold both volume keys and the power button at the same time. Once the logo is displayed, you can release the Power key.

Video: how to enter safe mode on Android above 4.1

Smartphones with a special transition to Safe Mode (table)

If standard methods for activating protected mode do not work, your smartphone or tablet may need to be rebooted in a special way. Study the table below and try non-standard solutions.

Smartphone	Activation methodSafe Mode
Google Nexus One	When you turn on your smartphone, when the logo is displayed, hold down the trackball and do not release until you see the main screen.
Push-button HTC	Turn off your device and then turn it on by holding down the Menu button until you see the lock screen.
HTC with touch buttons	With the gadget turned off, press the power button. When you see the manufacturer's logo, hold down the volume down key until you see the main screen and feel the vibration response.
	When starting the phone, at the moment of the first vibration, hold down the “Menu” button. Do not release until the system boots.
Samsung Galaxy series	While turning on the device, hold down the "Menu" key. If it doesn’t work, try holding down the “Power + Menu + Home” buttons while turning on and holding them down until the system boots.
	On your keyboard, press the Power and Menu keys at the same time. Hold them down and wait until the device vibrates. Release the buttons - the phone will turn on in safe mode.

The standard way to return to normal mode from safe mode is to restart the device using the power button. If the method does not work, to exit Safe Mode, remove the back cover of the gadget and remove the battery. Insert it back: after a minute the system will work as usual.

Surely all experienced users working on the Windows operating system know that the OS has a safe mode for troubleshooting and solving certain problems. But not everyone is aware that mobile gadgets can also be loaded in a similar design shell.

Let's try to figure out how to turn on the phone in safe mode (Android), and what steps need to be taken to do this. We will consider ordinary devices - tablets and smartphones running on official (stock) firmware. If you upgraded your gadget with amateur (custom) firmware, then the steps described below may not respond correctly or may not work at all.

Why is this mode needed?

Before enabling safe mode on Android, let’s decide why it might be needed on this platform at all. As you know, the Android operating system is distinguished by its, so to speak, democracy, while other shells try to protect their “inner world” as much as possible from possible mistakes of a novice operator. That is, the user has access to almost all software corners of the gadget. With the help of third-party software, you can easily change not only the appearance of the operating system, but also its behavior, beyond recognition. And as often happens, you have to pay for such beauty.

If, after all your interventions, the platform began to slow down, freeze, and generally stopped functioning normally, then you begin to ask the question: “How to enable safe mode on Android to eliminate these lags?”

The fact is that this mode can be called “clean”, that is, when it starts, only the main system services are connected, where you can track the history of installed applications and make some adjustments, and then reboot into a normal operating state.

So, how to enable safe mode on Android? In total, there are two main ways that will allow you to enter a “clean” system.

First way

You need to press and hold the gadget's power button until the reboot pop-up menu appears. Then you need to press and hold your finger on the “Disable device” item. After 5-10 seconds, a dialog box should appear that will warn you about entering the safe operating mode after clicking on the “OK” button. Some versions of Android (usually on tablets and phablets) can reboot immediately without any additional windows. Keep this in mind before you enable safe mode on your Android tablet.

After clicking on the “OK” button, your gadget should reboot and start only on basic system services. Moreover, the process may take some time, a little longer than during a normal download.

Second way

Completely turn off your mobile gadget as you usually do. Wait a few seconds and then press and hold the power button. After your phone brand or brand appears on the screen, hold the volume rocker in the “+” (increase) position.

After this, the “Safe Mode” icon will appear on the display, and the device will begin loading the platform on the main system files. In some versions of the OS, it is not necessary to hold the power button, just wait for the logo to appear on the screen and hold the volume rocker. Also keep this point in mind before turning on safe mode on Android.

How to disable Safe mode?

As a rule, this mode is disabled after the gadget is rebooted, and there is no need to perform any additional steps. If the phone continues to start in safe mode, it means the platform does not want to work correctly with installed third-party applications or the system is completely damaged.

The only way out in this case is to reset all settings to factory settings (“Settings” -> “System reset”). It is also worth noting that all information will be deleted, so take care in advance about transferring your phone book and other important data.

Yes, you heard it right - Android devices have a safe mode. Why is it needed? For example, you installed an application and after it your smartphone or tablet stopped working correctly. In safe mode, you can not only make sure that the problem is in the application (when the device boots, third-party applications do not launch), but also remove it.

How to enter Safe Mode on Android?

First, we will show an example on stock Android (version 4.4).

Press the device's on/off button until a menu appears on the screen, as shown in the screenshot.

Tap on “Power off” (or “Shutdown”) and hold your finger in this position for about one second, after which a sign will appear on the screen symbolizing the transition to safe mode. In our case, there is no sign; a message immediately appears stating that the device will be rebooted. Click OK.

The device will reboot and boot into safe mode, as indicated by the corresponding message at the bottom of the screen. By the way, you may notice how much faster your device works.

As for devices with other launchers, the process of enabling safe mode may be slightly different, but this is rare. The following is an example based on Samsung Galaxy.

Turn off the device in the standard way. We launch it and as soon as the Samsung icon appears on the screen, press the volume down button (down) and hold it until the desktop loads.

As in the first case, in the lower left corner you will see the inscription “Safe Mode”.

How to remove safe mode on Android?

To exit safe mode, press the power button, and then in the menu that appears on the screen, tap “Restart”. If there is no such item, then click “Turn off power”.

After the gadget turns off, turn it on and do nothing. In other words, you just need to reboot your device. However, please note that in some cases this does not work.

If we talk about the same Samsung Galaxy, you need to turn off the smartphone in the standard way - by pressing the “Shutdown” button.

The device will be turned off. Then turn it on and as soon as the Samsung logo appears, press the volume up key and hold until the desktop loads.

As you can see, the “Safe Mode” inscription has disappeared.

There is another option. In the menu, which you can see in the curtain, there is a Tap turn off Safe Mode (Open) button. Click on it.

Then confirm the action by clicking on the button with the same name.

The device will reboot normally.

How else can you turn off safe mode?

• If the method described above does not help, you can try turning on the gadget with the Power button or the volume up/down button pressed. You just need to be careful, because in this case you can start a different mode of operation of the device. Press the buttons one by one when turning on the device.

• The following may also help: turn off the device, then remove the battery, if it is replaceable, and wait at least 1-2 minutes, then insert the battery and simply turn on your device.

Many people know that Windows operating systems have a so-called safe mode. In this operating mode, only the main components of the operating system are loaded, which allows you to boot the computer in case of problems with drivers or other software.

But not many people know about safe mode in Android. Just like in Windows, safe mode on Android is used to solve problems with programs. If some program freezes and blocks loading or normal operation of Android, then you can enable safe mode and remove it. Thus, the functionality of the device will be restored. If you are interested in this, we suggest that you read this article, here we will talk about how to enable safe mode on Android 4.1 (as well as on older versions of Android).

The standard way to enable safe mode on Android

If you want to enable safe mode and you have Android 4.1 (or a newer version of Android), then first of all you need to try the standard method of enabling safe mode. In order to use this method, you need to press the power (lock) button of your smartphone and hold it for about 1 second. After clicking on this button, a small window should appear in front of you asking you to turn off the devices. In this window, you need to click on the “Power off” button and hold your finger on the screen until a window opens asking you to enable safe mode.

If you have a phone running CyanogenMod, then instead of the power button you need to hold down the “Restart” button.

After a window appears asking you to enable safe mode, simply click on the “Ok” button.

As a result, the smartphone should reboot. After the reboot, a message should appear at the bottom of the screen informing you that you are working in safe mode.

If there is no “Safe Mode” message, it means you were unable to enable Safe Mode. Try other methods.

About, how to disable safe mode , you can read in ours.

How to enable safe mode on an Android Samsung smartphone

If you have a smartphone from Samsung (Samsung GALAXY), then you need to enable safe mode differently. First you need to turn off the smartphone, then turn on the smartphone and at the moment when Samsung appears on the screen, you need to press the volume down button and hold it until the phone starts in safe mode.

Disabling safe mode on Android Samsung GALAXY smartphones is done in a similar way, only instead of the volume down button you need to press the volume up button.

Enabling Safe Mode on Android 4.0

If you have a device with Android 4.0 (or an even older version of Android), then you need to use a different method to enable safe mode. You need to turn off your Android smartphone and turn it on. When you turn it on, when the logo appears, hold down both volume keys and hold them until the smartphone boots up. After the download is complete, the phone should start working in safe mode.