Change screen extension on windows 8. How to change screen resolution in Windows XP
Perhaps the icons on your desktop are too small or large, we will help you figure it out. how to change screen resolution and adjust the size to the user's wishes. Resolution matters in terms of grain, placement of active elements, quality of image display/animation, and other computer manipulations.
Today the seven remains one of the most popular systems, so for this we will initially consider the methodology:
- Installation is performed via RMB on the desktop.
- Then you should select the “Screen Resolution” option.
- Next comes resizing.
- When ready, click on Save.
For Windows 10
Most affordable way change the resolution - use the modernized settings interface, where there is a Screen section. To go to it you need:
- Right click on the table and activate the “Screen Options” item.
- Go to additional options.
- IN this section You can select the appropriate resolution and save its selection.
Read also: How to activate Windows 7? Answer
An alternative option is to use the Control Panel.
- Through Start, go to the Control Panel and activate the Screen item.
- In the menu on the left, you should select “Resolution settings” and set the optimal parameter for each device.
- Click Apply to view the changes, click Save to make your final selection.
The change procedure is similar previous versions system, just right-click on the desktop and activate the “Screen Resolution” option. Then you should expand the “Resolution” menu, where you can select in various ways displays available for your monitor. If multiple screens are synchronized, it is recommended to set the resolution for each separately.
If you don’t know the appropriate value, you can move the slider in different directions and watch the elements change. The system determines optimal value for computer based technical parameters and marks the item with the message “Recommended.”
If the resolution is increased, the interface will receive more space, and all elements will decrease. This action allows you to increase image clarity and reduce the visibility of pixels. On the contrary, when the value is lowered, the icons increase in size; if they are difficult to see from afar, the resolution is reduced by 1-2 positions.
After setting the value, all that remains is to click Ok, in this case the action will be applied, the user will have the opportunity to view the result, only then click Save.
Read also: Optimization Windows operation 10 - detailed description
You can change the resolution through the home screen:
- You need to open the Charm panel in the lower right corner and go to Settings.
- Click on PC and Hardware.
- Select Screen.
- Adjustment is made to the desired size.
- Save your actions by clicking on the appropriate button.
For Windows XP
A simple way to achieve your goal:
- Perform a click right click mouse on home screen and activate the Properties option.
- In the new window, you should go to the Settings tab if another page is open.
- By moving the slider, the optimal indicators are determined and click OK to view the changes.
- Save is clicked only after the final selection.
How to change the screen resolution in the game
The easiest way for a novice user to change these settings is to go into the game and in the parameters section there is almost always this setting. Just install right choice from the listed options and enjoy excellent quality.
From time to time, a problem occurs that after changing the resolution, the program stops starting or always appears with a black screen, although there is sound and you can perform some actions. Also, in a number of other situations, it is necessary to change the resolution without logging into the game.
Read also: What to do if the tablet freezes? Look
How to change screen resolution without entering the game
Methods for achieving the goal exist, but the main difficulty is that each game is programmed differently, respectively universal method does not exist.
There are 4 main methods for achieving the goal:
- You need to change the settings in the game files. For settings is always done separate file with the name Config, Settings or UserProfile and others speaking names. They contain basic settings user. The files themselves are contained in the game directory, mainly in upper level hierarchy, but sometimes you additionally have to go to the BIN or others folder.
- To change a file, you need to open it with text editor, usually enough standard notepad. This is done by right clicking on the file and hovering the cursor over “Open with”.
- You should search the text by holding Ctrl+F and entering the word – Resolution.
- The found line indicates the extension separated by a space; it should be replaced; if the line is missing, it should be added.
- You need to specify a value lower than what is allowed on the monitor, usually for desktop PCs - 1920x1080 or 1280x1024. For laptops, 1366x768 or 1280x720 is often found.
- Some games have an additional launcher near the launch file that allows you to set settings even before launching the game; it is worth checking for the presence of such a file with the .exe extension.
- Using the file properties, you can set the value 640x480 - this will allow you to start the game if any failures occur, and set an adequate value inside it.
- To perform the procedure, you should find the file from the game and right-click, then select “Properties”.
- Then you need to go to the “Compatibility” tab.
- Set a selection next to “Use screen resolution 640x480”.
- The changes are applied and the game is attempted to start.
- You can change the required values through the registry, but due to the lack of standards for the location of the game, it is difficult to say where the parameter will be located. It is advisable to find information on the forum, you can also use the search and brute force method to determine the location. Usually the name of the parameter indicates the purpose of its use. After finding the file, double click and change the value.
Wrong set resolution will cause a lot of inconvenience during any actions, especially difficult to play normally. The methods in the article are designed to eliminate the problem at the system and individual application level.
If you still have questions on the topic “How to change screen resolution? Step by step instructions", then you can ask them in the comments
if(function_exists("the_ratings")) ( the_ratings(); ) ?>
I will describe the same procedure for Windows XP!
First click right click By free space desktop, then select “Properties” and click on it left button.
In the window that appears with the title “ Screen» click left button select the tab " Options«.
Well, then grab the slider in the frame with the heading “ Screen resolution"and drag it to the value you need.
Don't forget to apply the changes using the " OK«!
If the picture on the screen completely disappears or becomes somehow “scary” - do not panic and do not touch anything! The system, after waiting 15 seconds and not waiting for confirmation from you, will return everything as it was.
By the way, if the picture on the screen “flickers” unpleasantly, then do this:
Click on work again. right-click on the table, select " Properties", bookmark " Options«.
Basically, as in this instruction, but at the end, do not touch the resolution change slider, but press the “ Additionally«:
![](https://i1.wp.com/remnabor.net/wp-content/uploads/2012/04/%D0%BD%D0%B0%D0%B6%D0%BC%D0%B8%D1%82%D0%B5-%D0%BA%D0%BD%D0%BE%D0%BF%D0%BA%D1%83-%D0%94%D0%BE%D0%BF%D0%BE%D0%BB%D0%BD%D0%B8%D1%82%D0%B5%D0%BB%D1%8C%D0%BD%D0%BE.png)
and in the window that appears with the heading “ Properties: monitor» select bookmark « Monitor" and click on the drop-down menu with the heading " Screen refresh rate» and select the one there great value.
![](https://i0.wp.com/remnabor.net/wp-content/uploads/2012/04/%D0%A3%D1%81%D1%82%D0%B0%D0%BD%D0%BE%D0%B2%D0%BA%D0%B0-%D1%87%D0%B0%D1%81%D1%82%D0%BE%D1%82%D1%8B-%D0%BE%D0%B1%D0%BD%D0%BE%D0%B2%D0%BB%D0%B5%D0%BD%D0%B8%D1%8F-%D1%8D%D0%BA%D1%80%D0%B0%D0%BD%D0%B0-%D0%B2-Windows-XP.png)
All. Don't forget to press the traditional " OK" and confirm your choice by clicking the " " button in the confirmation window!
How to change / change the screen (monitor) resolution of Windows and others.
In previous articles:
Screen resolution determines the clarity of all objects that we see on the monitor. This applies to shortcuts, work windows, images and even text. The higher the resolution, the clearer these objects will be. This value is measured in pixels. In this case, the lowest resolution is considered to be 640*480, and the highest is 1600*1200. Exactly what resolution to set on your monitor depends on its size and basic parameters. Each user determines the most comfortable resolution for work and, if necessary, sets it manually.
What should you pay attention to?
CRT monitors usually have standard definition 800*600 or 1024*768 pixels. With these indicators on monitors of this type, and this is what the experts expected, it will be most convenient to work.
For LCD monitors, as well as flat displays (including laptop screens), you need to choose a higher resolution. It will allow you to see all the details as clearly as possible. As a rule, the most suitable resolution for the model is already set. But, to make sure of this, you can try to change it and understand what is most comfortable in a particular situation.
Important! How bigger monitor in size, the higher the resolution it adheres to. You can increase the screen resolution depending on the capabilities of the monitor yourself. At high resolution The clarity of the image will increase, but the size of everything will decrease. At low rates, everything will happen exactly the opposite.
How to change screen resolution in Windows?
You should turn on the computer and wait until it boots. Click the “Start” button, which is located in the lower left corner.
Select the “Control Panel” item, and there find the “Appearance and Personalization” section.
Now you need to select the “Adjust screen resolution” command.
A list will open next to which you need to click “Permission”. Now, using the sliders, you can change the indicator. When everything is ready, you can click the “Apply” button.
If you need to mark changes, you should click the corresponding button. In such a situation, all characteristics will return to their original values.
Important! There is a tooltip on the control panel that advises the user which resolution should be used for a particular screen.
What is native resolution?
Don't get carried away manual settings, because LCD monitors and computer monitors work best with their own indicators. Such indicators are called “native resolution”.
This is not required, but is highly recommended to ensure maximum text and image clarity. As for LCD monitors, they usually come with an aspect ratio of 16:9 or 16:10. Compared to standard widescreen monitors, this is more.
What permission standards exist:
With a 19 inch screen it is 1280*1024;
A 20-inch screen is 1600*1200;
If the screen is 22 inches, then it is 1680**1050;
With a 24-inch screen, this is 1900*1200 pixels;
Any user can change these indicators on a computer. When the data is changed, the machine takes a few seconds to readjust the image. A black screen may even appear for a couple of seconds, but it will quickly disappear and everything on the monitor will be adjusted to the new specified readings.
It is quite simple to manually change the settings of the described characteristic yourself. You will need to make a few mouse clicks. But, you need to think about whether a change is really required standard settings. After all, any equipment works more productively with source data.
-
-
How to boil, fry, stew, bake and steam in a slow cooker?
-
Features of 3D images modern TVs, how much will it cost?
-
What's new in Philips TVs, technologies, prices for models.
-
Where and how is it better to buy a refrigerator on credit (in installments) without overpayment?
To make your computer screen settings as comfortable as possible for your eyes, you need to know how to change your monitor screen resolution. personal computer or laptop.
Screen resolution is an indicator that determines the clarity of the display of all icons, pictures, that is, graphics in general. It is important to determine what will be best for the monitor.
Changing an extension using built-in OS features
How higher resolution, the better the display clarity. For example, a 22-inch display will have a standard resolution of 1680*1050, which is optimal and maximum for this screen.
All available sizes available in the settings, it is advisable to choose the largest of the proposed ones.
Follow the instructions to change the image resolution of your display:
- Go to desktop operating system. Click on it right key mouse and select the screen options item, as shown in the figure below;
- In the window that opens, you can adjust the size of text, icons and other system elements in real time. You can also adjust the screen orientation. To go to the selection tab, enter the word “resolution” at the top in the search bar;
- Select “change screen resolution”;
- Click on the drop-down list as shown in the figure and select the standard recommended one. Save the new settings.
Important! It happens that the recommended resolution is higher than the display. That is, the size of the final image does not correspond to the screen size, so some elements of the desktop may disappear from the user’s field of view. Adjusting the monitor will eliminate this problem. In the selection options, choose not the recommended one, but the one that fully displays all the elements of the desktop. At the same time, all graphics must be clear.
Several common types of expansion and corresponding display sizes:
- 1024*768 – perfect for screens of 15 or 17 inches. In a display with a resolution of 1024*768 pixels, the color depth is 16 bits;
- 1280*1024 – intended for displays whose size is 19 inches;
- Types of monitors measuring 24 inches most accurately convey the image at a resolution of 1920*1080. All displays with these parameters are FullHD.
Adjusting the screen refresh rate
The higher the display refresh rate, the correspondingly better quality images. That is why, in addition to size, it is necessary to pay attention to this parameter. To change the refresh rate follow the instructions:
- Go to the control panel. IN search bar enter “Screen” (without quotes);
- In the proposed search result, select the item that is responsible for the screen refresh rate, as shown in the figure;
- Set the most high frequency updates. This will eliminate possible periodic flickering of the monitor.
NVIDIA Software
How to find out required resolution for your display? This can be done on the official website of the manufacturer or in the instructions that come with the device.
On the boxes of monitors and laptops from Samsung there is information on how to install correct resolution and what to do if the real does not correspond to the declared.
By using special program, which is preinstalled on all computers equipped with an Nvidia family video card, you can also adjust the resolution of the user's monitor. Follow the instructions.
I welcome all visitors to my blog, and today we, as usual, will solve one of the most pressing and popular questions, how to change the screen resolution in Windows 7, XP and 8? In my article I will consider this procedure using the example of several operating rooms. Windows systems, so absolutely each of you, after reading, will be able to change the resolution independently.
Before starting, I want to say right away that there is no need to be afraid of anything. When choosing incorrect resolution the screen may turn black and nothing will be visible. You can press the Esc button to cancel the resolution you just selected.
Changing screen resolution in Windows XP
Now let's start with Windows XP. I will tell you two ways to change the screen resolution for this operating system, read this section of the article to the end and choose which method is more acceptable for you. By the way, in all operating systems there are at least 2 ways to do this procedure.
The first option is to right-click on the desktop and select “Properties”.
Go to the “Options” tab in the window that just opened. You will then see a slider anchored to the horizontal axis.
You can move it with the mouse left and right, respectively, the further you drag it (to the right), the higher the screen resolution will be and vice versa - to the left. After you select the most suitable resolution, click the “OK” button.
The screen will darken for a few seconds, after which the monitor will begin to display the updated picture in front of you. Another message will also appear in which we can confirm our actions or refuse them, in case incorrect display desktop.
The second way is to change the resolution through the Control Panel. To do this, go to the “Start” menu, “Control Panel”. We click on the item called “Screen” and a window opens in front of us in which we select the “Options” tab. Next comes a similar situation with the slider described above. I don’t use this method myself, because I think it requires more clicks than the first one.
Changing resolution in Windows 7
Now let's talk about how to change the screen resolution in Windows 7. This is done a little differently and much easier and faster. Just right-click on the desktop and immediately select “Screen Resolution” in the pop-up window.
There are no sliders here like in Windows XP. Opposite the inscription “Resolution” you can see a drop-down list in which you can select required permission. After selecting the resolution, click the “OK” button. The monitor screen goes dark for a couple of seconds and when it turns back on, it starts displaying the selected resolution. In the pop-up window, you can agree with it or cancel the actions and try another, more suitable one.
Alternatively, you can use the “Control Panel”, as it was in Windows XP. To do this, go to the “Control Panel” from the “Start” menu. On the right top corner screen, next to the inscription “View”, set the “Categories” parameter, if there is any other one there. Then in the “Design and Personalization” section we see sub-items, of which we are interested in the last one, which we click on. A window opens that we already worked with a little earlier.
Changing resolution in Windows 8
So we got to Windows versions 8. Despite the similarities with Windows 7, changing the resolution in Windows 8 is done differently; now I will explain how to change the screen resolution in Windows 8.
First way. Press “Win” + “X” on your keyboard, then select “Control Panel” from the menu that appears.
In the “Design and Personalization” category, select the item: “Adjust screen resolution.” In the “Resolution” section, in the drop-down list, click on the required parameter and save the changes. Then you can see what it will look like this permission on your monitor. In the pop-up window, we either agree (“Apply” - “Save changes”), or refuse and try another resolution.
You can go the second way, faster and easier. To do this, you must be in desktop mode. Right-click on an empty space and click on “Screen Resolution” in the drop-down menu. Next steps will be absolutely identical to those described just above.
If you are wondering how to change the screen resolution for your operating system, then I recommend carefully reading the section of the article that applies to your OS. This needs to be done so that you do not worry about any actions on the part of the computer.