How to remove numbering from only one page. Remove numbering from an entire document

When working with text documents Very often there is a need to number pages. Numbering allows you to create a correct table of contents and simplifies navigation through the document.

In a text editor Word numbering pages is enabled using the “Page Number” button on the “Insert” tab. Most users know about this and usually there are no problems with it. However, sometimes page numbering needs to be adjusted to the specifics of a particular document, for example, removing numbering from the first page, and not everyone can cope with this task.

Now we will consider just such a problem. The material will be relevant for users of modern Word versions. Such as Word 2007, 2010, 2013 and 2016.

To remove page numbers from title page First, make a simple page number that will appear on all pages of the document, including the first. After that, go to the “Page Layout” tab. Here you need to click on the small button, which is located in the lower right corner of the “Page Options” button block.

After clicking this button, the “Page Settings” window will open. Here we go to the “Paper Source” tab and enable the “Distinguish between first page headers and footers” option.

Then close the “Page Settings” window using the “OK” button. With this simple manipulation we removed the numbering from the first page Word document.

But there is one important point, now there is no number on the first page of the document, but on the second page there is a number “2”. If this numbering option suits you, then you can finish here. If you want the numbering on the second page to start from number “1”, then you need to go to the “Insert” tab, click on the “Page Number” button and open “Page Number Format”.

The result will be small window with numbering parameters. In order for the number “1” to appear on the second page of the document, here you need to enable the “Start with” option and set the value to “0”.

Thus, after saving this setting, Word will begin numbering pages not from one, but from zero. This means that on the second page we will get not “2”, but “1”, as needed.

It should be noted that this method removing numbering works fine only for the first page of a Word document, but if you need to leave the first two pages or more without numbering, then it will not work. In this case, the document must be separated using section breaks. You can read about how this is done.

As a rule, pages in Word are numbered. This is done not just for the visual appeal of the document, but in order to better navigate it, especially if we are going to print it. After all, you just have to mix up the sheets and arrange them in in the right order it will be quite difficult. In the article we will look at how to do and how to remove page numbers in Word (in versions 2003, 2007 and 2010).

Numbering in Word 2010

Let's start with one of the most popular versions of this text editor:

• To create page numbers in Word 2010, you need to go to the “Insert” tab and select the “Page Number” menu.

• A window will pop up in which you should select the numbering location that you prefer: at the top of the page or at the bottom, in the center, on any edge or on any of the fields of the page.
• When you select the desired option, the numbering in Word will appear automatically.

Removing numbering in Word 2010

Removing numbering is accompanied by even more simple actions:

• To do this, open the “Insert” tab.
• Open the “Page Number” item and left-click on the “Delete Page Numbers” item.

As a result of these actions, all numbering in the document will be deleted.

Numbering in Word 2007

Now let's look at more earlier version- "Word" 2007. It’s also easy to insert page numbers into it:

• Here we still have the same “Insert” tab and the “Page Number” button with a drop-down menu containing the same lines.
• Here we can choose the future position of the page numbers: in the margins, at the top or bottom of the document pages, in the center or on the right and left edges.

Removing numbering in Word 2007

As in Word 2010, deleting page numbers in Word 2007 is very simple. Still in the same “Page Number” menu, click on the “Delete page numbers” item. Page numbers will be automatically removed.

Numbering in Word 2003

Let's look at how to make it and how to remove it numbers in Word pages for the 2003 version. Almost everything is the same here, just a slightly different design of menu items.

1. So, in order to insert numbering, we will use the “Insert” tab.
2. In the drop-down window, select the line “Page numbers...”.
3. As a result of this, we will have a window where we can select the required numbering position.

Unlike subsequent versions, there are the following options:

• at the bottom or top of the page;
• left, center, right, inside, outside

It is worth noting that there is no option to put a page number on the side margins of the document, which may make some users refuse to use this version of this text editor.

Removing numbering in Word 2003

Now let's look at how to remove numbers in Word pages. Unlike subsequent versions, Word 2003 does not have special button, which allows you to automatically remove numbering. Therefore, you will need to double-click the page number with the left mouse button and manually delete it by clicking the Delete button. But this action only needs to be done on one page, after which the numbering will disappear throughout the document.

It is also worth noting that in all versions of Word presented in this article, starting with the 2003 version and ending with the 2010 version, there is a “Format” item in the “Page Number” menu page numbers».

In versions of Word 2007 and 2010 this item is located in the pop-up window after clicking on the “Page Number” menu, immediately after the numbering placement options and before the “Deleting page numbers” item. When you click on it, the “Page Number Format” window appears.

In the Word text editor version 2003, this window can be opened in the “Page Numbers” menu of the “Insert” tab by clicking on the “Format...” button.

Formatting Types

In this window, absolutely the same actions are available in all versions of Word. For example, you can choose the following number format:

In addition, here you can include the chapter number by checking the box next to the line of the same name. After this action, the following items will become active: “Starts with style” and “Separator”. In these paragraphs you can also select the desired option. If we don’t need chapter numbers, then the checkbox can be unchecked.

You can also select numbering options. There are two points here:

1. "Continue". This item indicates sequential numbering from the first page of the document.
2. “Start with” - this item allows you to start numbering the document with an arbitrary number, which can be specified here. For example, you can start numbering from the 5th page, in which case the number “5” will be located on the first sheet of the document, “6” on the 2nd sheet, and so on.

Finally

We looked at how to do and how to remove page numbers in Word for versions 2003, 2007 and 2010. Very useful feature, which allows us not to get confused in sections of the document, especially after we have printed it. An important advantage is that it is quite simple to make and remove page numbers in Word in almost any version, since the design of these text editors is very similar.

Many novice Word users, when preparing text (thesis, term paper, report), are unable to remove page numbers, set the style of the header and footer and the location of numbers.

This article is intended to help with solving these problems in Word. They are not that complicated. Removing numbering from some pages or from an entire document takes just a few clicks.

How to remove a number from the title page?

To remove a number from the first sheet of a document, follow these steps:

1. Essentially Word menu Click the "Insert" section.

2. Click "Header" or "Footer..." (depending on where the page number is located).

3. In the header and footer settings panel, under the catalog of number templates, click the “Change... header” option.

4. To prevent numbers from being displayed on the first page, on the “Designer” tab ( last section V top panel Word), click on the checkbox in the “Special footer for the first page” box.

5. Click the red button with a cross “Close Header and Footer Window”.

If you want to set the numbering count not from the first, but from the second page (that is, the number “1” should be displayed not on the title page, but on the 2nd sheet of contents of the document), do this:

1. In the “Insert” tab, click the mouse to open the “Page Number” drop-down menu and select “Format...”.

2. In the “Format...” window, in the “Page numbering” block, click the “start with” option and set the number “0” in the adjacent field. Click OK.

How to remove a number from the second page?

1. Place the cursor at the end of the first page.

2. Create new section: on the “Markup...” tab, open the “Breaks” subsection and click “Next...”.

3. After inserting a “break”, if you already had a number missing on the first sheet, it will also disappear on the second, since this is the beginning of a new section, and the numbering will be displayed only starting from the third sheet.

If there is a number on the first page and you want it to be there, place the cursor on the second sheet, open Insert → Header or Footer → Edit → enable “Special Header” → close the header and footer window (red button at the top right).

How to completely disable numbering?

Method #1

1. Double-click the left mouse button on the page number (first or last - it doesn’t matter).

2. While holding left button, highlight the number with the cursor. Press the Delete key.

Method #2

1. Open the "Insert" section.

2. Click the “Page Number” subsection and select the “Remove Page Numbers” option.

Selective numbering

1. Break your project in Word into separate sections:

• place the cursor at the end of the page (at the intended section boundary);
• open the “Markup…” tab;
• Click "Breaks" and select the "Next..." option.

2. Click: “Tab” → “Number...” → select a template (“Top...”, “Bottom...”).

3. Go to the beginning of the section in which you want to edit the numbering (indicated in the header markup).

Attention! Any changes made within a section do not apply to other sections.

4. Set up the numbering format:

• remove the number from page 1 of the section: Designer → Special footer;
• setting the style of numbers: Page number → Format...;
• numbering countdown (from which digit): Number... → Format... → Numbering... → Start from...

Good luck in mastering the Word editor!

Many users find it very difficult to remove page numbers in Word. Problems arise with the placement of numbers, the page number, or the style of the footer. In this article we will figure out how to remove numbering on some pages in Word or from the entire document.

How to remove a number from the title page?

To remove a number from the first page, You need:

1. In the main menu, click on the “Insert” section.

2. Then click on "Bottom" or "Page header".

3. In the settings under all number templates, you must select the option "Change... footer."

4. To home page there was no number, you need to put a tick in the window on the “Design” tab "Special footer for the first page."

5. Then close the header and footer window - to do this, click "Close the header and footer window."

If you need to display the number 1 on the second sheet, then for this you need configure page numbering countdown:

1. Go to the “Insert” tab in the item "Page number" select “Format of page numbers...”.

2. In the window "Page Number Format" in the block "Pagination" you need to select “start with:” and write the number “0”.

Next you need to click “OK”.

How can I remove the numbering digit from the second page?

1. Place the cursor on the first page at the end.

3. After this option, if there was no number on the first sheet, then it will disappear on the second sheet, since a new section will begin and numbering will begin from the third sheet.

1. Open the "Insert" section.

2. In subsection "Page number" must be selected "Remove page numbers."

• See also this -

How to remove numbering from some pages in Word? - video

Working with the Word program is a set of skills required to modern man. Preparation of reports, statements, scientific and coursework, abstract research - all this requires knowledge of the basics of document formatting. As a rule, problems arise when changing headers and footers - that part of the printed sheet on which headings and subheadings and page numbering are displayed. About the last point and we'll talk in this material.

Adding or removing a page number from the title page

Page numbering is already a familiar function, widely used in preparing any scientific research printed format. In order to use this text editor option, you need to go to the “Insert” tab and start working with the header and footer, which can be displayed either at the top of the printed sheet or at the bottom. Standard numbering is a footer located in the middle of the page, indicated in the form of a number or number. In order to carry out the specified document formatting, you must:

• On the “Insert” tab, click on the “Page Number” function.
• Then click on the “Bottom of Page” sub-item.
• Select a sample – “Simple number 2”.

You will see many other options for placing document pagination. Accordingly, you can change the location of the number on the page (left, right, top, etc.), depending on the requirements for the preparation of your work. However, the selected numbering type will be applied starting from the first sheet, without taking into account the title. In order to get rid of an extra number, you need to:

• Go to the “Insert” tab.
• Click on the “Page number” sub-item.
• Select the required type of numbering.
• Left-click on the command “Special header and footer for the first page”.

In this way, each sheet of your work will be numbered, with the exception of the first, title page.

Removing document numbering

Sometimes it becomes necessary to remove the specified pagination. To execute this simple command, you must follow the specified algorithm of actions:

• Go to the “View” tab.
• Click on the “Page Layout” command.
• Selecting the “Header and Footer” item.
• Click on the page number (a dialog box should appear to format the number).
• Click on the “Delete” (or “Delete”) command.

Adding a starting page number other than 1.

Document numbering can start from any number. This option – useful tool in the event that it is necessary to continuously number two different documents. To run the command you need to do the following:

• Go to the “View” tab.
• Selecting the “Page Layout” item.
• In the “Document Elements” panel, click on the “Header and Footer” column.
• Click on the “Page” function.
• Click on the “Format” button.
• In the “Start with” field, enter the required value. For example, “Start at 21.”
• Click on the “OK” command.

Thus, the document will be numbered in order, starting with designation 21.

The work of preparing research will seem trivial and easy if you master the basics and get to know each other better. text editor"Word". And formatting and changing documents will take a matter of minutes if you spend a little time studying this article. And let everyday things be a joy!