Firmware via Wi-Fi. Firmware via TP-Link Tether mobile application

In this article I will tell you how to flash a TP-LINK router, but since the admin panels of all routers from this company are very similar, you can configure routers using these instructions: TL-WN841ND, TL-WN842ND, TL-WR741ND, TL-WR743N. Updating the router firmware important parameter in the stable operation of the entire system. Since updates make it possible to correct errors in the code, thereby providing more stable work devices, closes security holes, and sometimes adds new functions to the device. That is why, when purchasing any device, the first thing I recommend is updating the firmware.

Important!!! You should not update the router firmware by connecting to WEB interface via Wi-Fi.

1 . To begin with, we connect the router to the computer, insert the cable provided by the provider into WAN port, V LAN port On the router, connect the cable included in the kit and connect it to the LAN connector on the computer.

2 . On the computer in settings network card set: Obtain an IP address automatically, and Receive DNS servers automatically. See the picture below:

3 . Dial in address bar your Internet browser(Opera, Internet Explorer etc.) address 192.168.0.1 and press the “Enter” key.

4 .The main router settings menu will open. Here we can see in the first line is the firmware version that is installed, you also need to pay attention to the hardware version - this is the second line.

5 . We go to the website (in our case) http://www.tp-linkru.com and in the search bar on the site we write the model of our Wi-Fi router.

We look at the search results and select our router.

In the window that opens, go to the “Downloads” tab. A window will open with available versions router software, choose the required version embedded software.

Then select latest version firmware and download it to your computer. Since the file you downloaded is zipped, it needs to be unpacked.

6. After that, go to the tab with the web interface TP-Link router, in the menu on the right, select “System Tools” - “Firmware Update”.

Select the update file that we extracted from the archive and click “Open”. Then click on the “Upgrade” button, a message will appear, click “OK”.

The router will reboot and a window will appear asking for a login and password to enter the settings. Since all settings have been reset to factory settings, we use admin and admin to log in.

All firmware versions on the router are updated! Now all that remains is to configure the Internet connection and WiFi.

Are you having difficulties with your computer?

Our specialist will help you set up your computer and computer equipment. Call us and we will set up, repair, adjust your computer equipment quickly, efficiently, with a smile. Tel. in Stavropol 600-890.

Emergency computer help -We work for you!

Surely many users are interested in how to reflash a router. However, first of all, it is worth noting that this task is not so simple (although quite feasible) and requires certain knowledge and skills. Unskilled user actions can lead to malfunctions of the router, up to its complete failure.

When it is needed

The need to reflash the router can be caused by several reasons, among the most basic are the following:

• Firmware update required. Manufacturers often give users this opportunity, which increases the stability of the Internet connection and adds new functions.
• If the selected Internet provider is not supported by the device or is not supported correctly, then the situation can be corrected by flashing it.
• If the router is unstable or too slow.

A few general rules

It should be remembered that before you reflash the router, you need to make sure that there are no problems with the power supply. Sudden shutdown electricity during the flashing process itself can lead to device failure.

In addition, you need to remember that you cannot reflash any router via wireless network Wi-Fi. This can only be done by connecting the router to the computer.

You need to download update files either from trusted resources or from the official websites of manufacturers.

You also need to remember that before you reflash the router, you need to remove the WAN cable (provider cable) from the socket.

You also need to find out the current firmware version. Usually it is indicated on the device itself, on a paper label. You should find an inscription like: Ver 2.0. The numbers will indicate the current firmware version. Rollback to previous version recommended only if absolutely necessary.

Following these simple rules will allow you to perform flashing quickly and painlessly, and will also save you from unnecessary headaches as a result of an unsuccessful operation.

Flashing a TP-Link router

This router model is quite well known on the market and is widespread, and therefore it is not surprising that many users are often interested in how to reflash a TP-Link router.

The procedure here will be as follows:

• First you need to download the file with the firmware and place it in any folder convenient for use;
• then you need to turn on the router and connect it to the PC via an Ethernet network cable;
• then you need to open any accessible browser and type in its address bar the IP address: 192.168.1.1; if this address is not working, then you can try: 192.168.0.1 - it should work;
• When prompted to enter authorization parameters, you must enter the login and password in the appropriate fields: admin and admin;
• The standard settings window will open, where you will need to go to the System Tools tab and select Firmware Upgrade;
• at the top of the window you need to find the File item, you can type local address the location of the downloaded firmware file manually, but the easiest way is to simply click on the “Browse” button and in the dialog box that opens, indicate the already unpacked firmware file;
• Next you need to click on screen button Upgrade and OK;
• All you have to do is wait until the download and firmware status bar is filled to 100%, and then the router will either reboot itself, or this will need to be done manually.

Attention! All router settings will be reset to factory settings, and therefore before you reflash the TP-Link router, you need to either remember or write to separate sheet all settings. If previously installed allowed software, you can save the configuration file in advance.

Reflashing the Dir router

First of all, it is important to know that routers of this model, revisions B1, B2, B3, are incompatible with routers of revisions B4, B5, B6 and B7. Therefore, you cannot download the firmware version intended for B1, B2, B3, and use them on B4, B5, B6 and B7 routers, or vice versa. Failure to comply with this rule will result in device failure.

Router D-Link Dir refers to somewhat older models, and therefore the need to change its firmware can be caused by many objective reasons.

And, quite naturally, many owners of this device will be interested in how to reflash router Dir. However, the flashing process in this case will not be fundamentally different from changing the firmware of other router models:

1. First, you will need to download and unzip the firmware file. When unzipped it should have
2. Turn on the router itself and connect it to the computer using the help from the provider (this must be removed).
3. Next, in the browser you need to type: 192.168.1.1 or 192.168.0.1.
4. After this, the router will offer to save your password and login for security. They are standard for these cases: admin and admin.
5. In the settings window that opens, select the “System” tab and then select the “Software Update” item.
6. At the next stage, you need to click on the “Browse” on-screen button, specify the downloaded firmware file and click on the OK button.

If everything is done correctly, then after the reboot an updated interface window will appear indicating current version firmware.

Updating your D-Link router

As for how to reflash a D-Link router, the algorithm of actions here will be similar: download the firmware file, connect the router to the computer, enter the above address numbers in the browser.

Then you will need to click on the “Advanced settings” screen button in the settings window to access necessary points"System" and "Software Update".

Further actions will be similar to those described above - click on the “Browse” button and specify the downloaded firmware file, then click on OK and wait until the installation process is completed.

The last step in flashing will also be to reboot the router.

If everything is frozen

It is possible that those who are puzzled by the question of how to reflash the Dir 300 router from D-Link will encounter during the flashing process that the browser or the router itself is frozen. However, you shouldn’t be afraid of this, it’s just that during the installation of updates, the router loses connection with the computer for a while, but restores it itself. The interruption time may vary, it depends both on the speed of the computer itself and on the router, but on average it takes no more than one or two minutes.

Of course, if the interruption continues for too long, there may be a serious problem or this version The update is incompatible with the router model. You can try to force reboot the router and perform the installation again, before making sure that the installation is really suitable version firmware.

Under no circumstances should you turn off or unplug the router from the outlet at this time!

Flashing an Asus router

Asus routers are also common on the market network equipment and also require systematic updating software. Because for everyone who is interested in how to reflash Asus router, you need to do the following:

• connect the router to the computer using an Ethernet cable;
• enter in the address bar: 192.168.1.1 or 192.168.0.1;
• indicate required login and password;
• Now you first need to return to the factory settings, to do this you will need to go through the following points: “Advanced settings” - “Administration” - “Save/Load/Restore settings”;
• here you need to do it first backup copy existing settings and only then perform a factory reset;
• then you will need to go back to the browser settings window and go through the following points: “Additional settings” - “Administration” - “Firmware update”;
• indicate the downloaded firmware file;
• After installing the new file, you will need to go to the settings page for the third time and reset them to factory settings again.

Reflashing the Kyivstar router

There is nothing special about how to reflash a Kyivstar router. After all this operator uses TP-Link router models, the flashing of which has already been discussed above. However, there are some features and nuances that should be taken into account:

1. To get to the settings window, you need to enter not just numbers in the browser, but: 192.168.1.1/userRpm/SoftwareUpgradeRpm.htm.
2. You need to enter the following combination as your login and password: kyivstar and kyivstar.

Other actions are similar to those for updating TP-Link routers.

Reflashing routers from Beeline

But those who are interested in how to reflash a Beeline router can breathe a sigh of relief - flashing their device is also no different from the software update process for everyone else: the same local IP in the address bar and the same familiar connection “admin - admin” " To get to the window indicating the firmware file, you will first need to click on the “Advanced settings” on-screen button, then click “Other”.

In the window that opens, you first need to click on the “Select file” button, and after selecting it, click on “Perform update”. After rebooting, the router will be updated.

You must also remember: when trying to carry out a custom flashing so that routers from Kyivstar or Beeline work with other operators, the subscriber automatically loses the warranty on the device.

As a result of these manipulations, the stability of the device may increase, and some new functions may be added. And yet, before you reflash the router, you need to clearly understand the entire procedure. If you are not sure about own strength, it is better to contact a service workshop.

Most Internet users have been interested in the following question at least once: how to reflash the router yourself? Most often, it becomes relevant if there are complaints about the data transfer speed or failures in the functioning of the device. In order to independently reflash the device, you need to have some understanding of this process and have certain skills. It must be taken into account that wrong actions user can lead to complete breakdown of the router.

In the article we will look at what the flashing process is, how it is carried out, and also describe the nuances of updating the software of some device models.

When is it necessary to reflash a router?

Before considering the main question of how to reflash a router, you need to figure out when this is actually required.

The reasons for updating the software can be completely different, depending on the quality of the device and its model. However, we can note the main nuances that ultimately require reflashing the router:

• Forced update to a newer version. This is necessary in order to protect your device from critical errors. Often, in newer versions of the software, the manufacturer corrects all existing deficiencies. New features can be added and communications improved.
• Inability to support a specific provider. It is not uncommon for a problem to arise when a device does not work with the selected service provider. Often this nuance is solved through flashing.
• The router is too slow or is limiting the Internet speed.

Features to consider

Before flashing the router, you need to check access to electricity. The main thing is that there are no problems with the power supply, otherwise you may get unexpected results. If the light suddenly turns off while changing the firmware, the device will fail by 95%.

You only need to complete the software update process when you directly connect the router to a laptop or computer. Under no circumstances should this be done over a wireless network. Download new version Firmware preferably from the official website or from truly trusted resources. Before updating, you must remove the provider cable from the router.

Before downloading a new firmware version, you need to find out the base number. As a rule, it is indicated on the box and on the device itself at the bottom. The inscription will look like Ver 4.1. It is the numbers that will indicate which firmware version is installed at the factory. It is best to roll back to it only in situations of real need.

Only by following these rules will it be quite easy to update your software. We’ll find out how to reflash a router of certain brands a little later.

Flashing a TP-Link router

TP-Link models are quite well known among advanced users. Most often, the choice of many falls on routers of this line. They are distinguished by their low price and good quality.

Due to the fact that the model is widely popular, many are wondering how to reflash a TP-Link router. Let's consider necessary actions steps that need to be taken to successfully update the software.

First, you need to download a specific version of the firmware from the Internet and place it in any folder on your computer that has access to quick access. After this you need to use network cable connect the router to the computer and turn it on. Then in any browser you should go to personal account devices where they are located standard settings. In the “System Options” tab, you need to find the “Update” item. There will be a special menu in which there is a file with new firmware. After this, you will need to upload it to the site itself. Next, the user is required to click on the “Update” and “Okay” button. After that he should wait certain time until the status bar loads 100%. Next, the router will reboot either automatic mode, or you need to do it manually.

• Attention! After completing the update process, all settings will be reset to factory settings. That is why, before flashing, you need to copy important data onto a piece of paper or make a so-called backup. It will allow you to save all router settings in local memory computer. After the update, you just need to upload them to the site.

This review should help every person with his question. Therefore, there should be no nuances on how to reflash a WiFi router of the TP-Link model. The process is quite easy and simple.

Firmware for D-Link Dir 300 router

Dir series routers have their own type of revision, so the search for software must be taken seriously. You cannot download firmware for B1/2/3 and install it on other models. This will entail a malfunction and the possibility of a “lethal” outcome of the router. Due to the fact that the Dir line devices are older representatives of routers, they have quite large number objective reasons to update the software.

So, how to reflash D-Link router 300? General process will be no different from the above. But you should still consider the procedure in more detail, because there are some special nuances.

First you should download from the official website required version firmware. After this, you must unzip it.

• Attention! The required file will have a .bin extension.

After this, you need to connect the router via an Internet cable, after turning on the device itself. In your browser, you need to go to the router’s internal settings website. In the menu section, open the “System” section. It will contain “Software Update”. In the last menu you should find the “Browse” button and download required file with new firmware version. Afterwards, click on the “Save” button. Next, the update will occur and the router will reboot. At this point, the flashing of the device can be considered successfully completed.

Firmware for other D-Link routers

Thinking about how to reflash a D-Link router different versions, you need to have a clear plan for how this will be done. The process of updating one of the models in this line has already been described above. However, it is necessary to consider general option software changes. The fact is that the Dir 300 device behaves especially capriciously when flashing, so detailed description the update was submitted for separate consideration.

You need to turn on the router, connect it to your computer or laptop using special cable. After that go to system settings by entering the standard IP of the router in the address bar. Next you need to find the advanced options section. It will contain the “System” item. Having entered it, the user will see a special section for updating. In it you need to click on the “Browse” button, find required file, download it and update your device. Ultimately, the router still needs to be rebooted.

What should I do if the update process is stuck?

As mentioned above, the Dir 300 router is quite problematic when it comes to updating the firmware. It often happens that just when changing software, the router simply freezes. There is no need to immediately panic and be afraid of this. Often the router loses connection with the computer, but is able to restore it itself. This process can take from a few minutes to an hour. It all depends on the power of the PC and router. As a rule, communication is restored in no more than five minutes. If you wish, you can reboot the router and start flashing again. But this should be done only as a last resort.

• Attention! You should not disconnect from the power supply or interrupt the download yourself. You can only reboot the device.

Reflashing the Kyivstar router

How to reflash a Wi-Fi router from Kyivstar? This question is quite popular on relevant forums. mobile operator. Nothing special can be found during the update process. The fact is that Kyivstar uses TP-Link models, and they were already discussed above. There are only a couple of nuances that need to be taken into account. Instead of the usual IP, you need to enter a rather long code in the address bar. It can be found on the manufacturer's official website. The login and password are the same and look like kyivstar. After this, you need to perform the usual steps to update the software.

Reflashing a router from Beeline

I would like to rejoice those who are wondering how to reflash a Beeline router. The software update process is no different from the standard one. As usual, you need to connect the device to your computer, enter into the browser search bar local address and go to internal settings devices.

In order to update the software, you need to find the “Advanced (additional) settings” section. There will be an “Other” item that you need to go to. In the last menu, the user will see a “Browse” button. By clicking on it, you need to upload your updated version firmware. Next, click on the “Update” button and wait for the process to complete.

• Attention! If the consumer knocks down factory firmware and changes it to a custom one in order to allow work with other operators mobile communications, the router automatically voids the warranty.

Bottom line

As a result of flashing, the user receives more stable operation, best quality Internet, and in some cases, new functions. But still, in order to update the software, you need to be one hundred percent confident in your abilities, otherwise you simply shouldn’t try. After all, the results can be disastrous.

Start of article:

As strange as it may sound, flashing your router with alternative OpenWRT firmware is no worse than flashing your router with updated official firmware from the website of your device manufacturer. The same errors and/or random, unpredictable events may occur here as when updating the software version from the manufacturer's website.

You downloaded the wrong firmware, i.e. not for your device. It may happen that during the firmware, your lights will be turned off, etc. But I hope that you do everything correctly and you will not have any unexpected surprises with electricity.

Flash the router with the latest firmware from the manufacturer’s website

Important. Before flashing the router with alternative firmware, you need to download and install latest firmware from the website of the manufacturer of your device. When I first flashed my router, I didn’t do this, and then for a long time I couldn’t understand why, after flashing the alternative firmware, I couldn’t access the router’s web interface. The router pinged on 192.168.1.1, but there was no web interface (the firmware definitely had a built-in web interface). Dancing with a tambourine solved this problem, but we don’t want this to happen to you. So, first, be sure to update to the latest official firmware from the website of your equipment manufacturer.

Important. The connection when flashing the firmware must be via a network cable, and not via Wi-Fi.
Later, after updating the router to an alternative one, you will be able to access your devices via Wi-Fi without any problems, after setting up the router appropriately. But to install the firmware, you need to communicate with the router via a network cord! Otherwise, your router will most likely turn into a “Brick”.

So, go to the website of the manufacturer of your router and download the latest firmware. Here, too, it is important not to make a mistake with the model and revision of the device.

For TP-L ink TL-WR1043ND ver.1.8 latest firmware from the manufacturer’s website can be downloaded here. The firmware is in the archive - unzip it first.

We go to the web interface of the “Experimental” router along the path “System tools”, “Firmware update” and click the “Browse” button.

In the window that appears, indicate the path to the latest official firmware of your router and click the “Open” button.

And then the “Update” button.

A warning window will appear where you will be asked if you really want to update the firmware - we agree.

The firmware process will begin, wait for it to finish. The process lasts about 3 minutes. After updating with the factory firmware from TP-Link, you can log into the router’s web interface at 192.168.1.1 with the login “admin” and password “admin”.

Download alternative OpenWRT firmware for your router

Important. Depending on the model of your router and its hardware, in particular, due to the small amount of memory for firmware, it may turn out that alternative firmware OpenWRT may not have a web interface. Therefore, before downloading and flashing your router, find out on the forums whether your OpenWRT firmware has a built-in web interface. Of course, for firmware without a web interface when mounting external USB The media is made into a web interface. But this is a different case, requiring a more in-depth understanding of the process, knowledge special teams, the use of appropriate programs, and this is no longer included in the example we are considering. For the TP-Link TL-WR1043ND router, the OpenWRT firmware has a built-in web interface. And further, we'll talk only about routers for which a web interface is already built into the alternative OpenWRT firmware.

Important. At the end of the firmware name it must be written factory - this means that this firmware can be flashed via the Web interface from the official firmware of the manufacturer of your router. It is also important not to make a mistake when choosing the firmware and revision for your device.

For routers, download the firmware from wiki.openwrt.org/toh/start

Scroll the mouse wheel down and find the manufacturer of your router, click the corresponding link

In the next window, specifying the path to save (for example local disk“C”), press the “Save” button again.

For your device, the download link and path to it will most likely look different. But I think that by clicking various links on this site, or searching for information on the Internet, you will still download the firmware needed for your equipment.

For TP-L ink TL-WR1043ND ver.1.8 latest firmware OpenWRT, at the time of this writing, can be downloaded here. The firmware is in the archive - unzip it first.

Flashing the router with alternative OpenWRT firmware

Flashing a router with alternative firmware is no different from flashing a router with official firmware.

Go to “System Tools”, “Firmware Update” and click the “Browse” button to specify the path to the firmware.

In the window that appears, select our alternative firmware and click the “Open” button.

A warning window about updating the firmware will appear - we agree.

The firmware process begins, let's go pour ourselves some coffee...

The process for the TP-Link TL-WR1043ND lasts quite quickly, but by the lit LEDs of the router it is still impossible to judge the completion of the firmware process. Therefore, we wait 3 minutes and drink coffee.

After 3 minutes, to check the completion of the process, run command line and check the ping by entering ping command 192.168.1.1 and pressing Enter. If the firmware process is completed, you will see a response from the router as in the figure below. If you are too lazy, you don’t have to do this, but after 3...5 minutes, immediately try to connect to the router through a browser.

Note. After flashing the router, even after 5+ minutes from the start of the firmware, I was unable to immediately access the OpenWRT web interface. Changed different browsers- the result is zero. I don’t know why this happens - but it’s a fact (I flashed the router using various reasons several times, and it has always been like this). And this can be easily treated - unplug the power cord from the router and after a few seconds plug it back in.

We type 192.168.1.1 in the browser and get to the home page.

Congratulations, you have flashed the router correctly!

Good afternoon, Friends! Welcome to our training portal “With a computer on “YOU”. In the previous article, we looked at how to configure a router. Today, as promised, I will talk in detail about such an important topic as .

Many of our readers will say that there is no need to update the router firmware. I bought the device, connected it, configured it. Everything works, which means you can forget about it. But sometimes there are cases (device malfunction) that you cannot do without updating the firmware. The article will also be useful for those who want to use the capabilities of the purchased device to the maximum.

We will look at the main reasons that prompt us to make changes to the factory settings of the router, using the DIR300 router as an example, we will analyze in detail the process of changing the firmware, and also, especially for our readers, I will tell you about alternative (not from the manufacturer) firmware. As a rule, they have a large set additional functions and are often more reliable.

Anyone's job modern device is based on the coordinated interaction of software and hardware components. The router is no exception. The stability and speed of the router depends on these two components. It is very difficult to change the hardware, but to reflash (or change router firmware) the device is easy, and besides, you can thus expand the functionality of the device and extend its life.

1. Security. Like any software, firmware requires improvement. Vulnerabilities in older firmware versions play into the hands of scammers. If the problem of the safety of personal data is quite acute for you, then it’s time to think about updating the router firmware.

2. Data transfer speed. With the development of new technologies, the speed of data transfer over the Internet is increasing. By going to new tariff with more high speed, we may be faced with the fact that our old router does not support such speeds. What to do: buy a new one? Or maybe you should still try to reflash it?

3. Additional features. Replacing your router firmware can significantly improve basic functions devices. For example, most models with USB port with factory firmware allow you to connect only a 3G modem. And if you use alternative firmware, you can connect flash media to the router, thus adding the network storage function.

4. Stability of the device. By replacing the firmware with a more recent version, you will get a faster, more stable and functional device. After all, as a rule, developers in new versions of the program correct the shortcomings and vulnerabilities of previous versions.

reflashing a router using the example of “D-Link DIR300”

Before reconfiguring the device, I recommend that you establish a direct cable connection between the router and the computer. And also, if possible, ensure their uninterrupted operation by connecting them to a source uninterruptible power supply. The process of changing the firmware for various models routers is approximately the same and contains the following steps.

1. First of all, you need to go to the manufacturer’s website and look for updates for your specific model(usually the new firmware version should be found in the “Support” section).

In my case, you need to go to ftp://ftp.dlink.ru/pub/Router/DIR-300_NRU/Firmware/ and download the file with the “.bin” extension. You should download the file for a specific model (in my case, for the model marked B1).

You can also additionally download the firmware russifier file.

ATTENTION! Do not confuse the device model (indicated on back side router). Otherwise, there is a high probability of getting a non-working device.

2. The next step is to go to the router’s web interface. The documentation for the router shows the default IP address. Most often this is the address 192.168.0.1. Next, a window for entering your login and password will open.

In the “Firmware upgrade” section, click on the “Select file” button and specify the firmware file downloaded from the server.

4. Then click on the “Upload” button. The firmware update process will begin.

On this step It is very important not to turn off the computer and router from the power supply, and also not to disconnect them network connection, as this may cause the device to malfunction.

Once the firmware update process is complete, the router will reboot. And it will be ready to go.

alternative router firmware

Very often it turns out that we cannot find in the firmware from the manufacturer necessary functions. But as they say, a holy place is never empty. If there is demand, there is also supply. So there are specialists who “clip” their own firmware for the most well-known models of routers, which can implement the capabilities of the built-in tor client, FTP, NFS, IP telephony server, and open the possibility of connecting a flash drive or network printer and much more.

The most common firmware is from three companies: OpenWRT, DD-WRT, Tomato.

1. DD-WRT - is the most popular and complete solution. As a rule, it is supported by many routers (a list of them can be found on the website dd-wrt.com). The resulting set of additional functions is quite impressive. About stability and reliability of operation DD-WRT firmware This is evidenced by the fact that they are used on a number of routers as “native” routers.

2. OpenWRT - provides the user with a fully configurable system, assembled according to needs. The user himself chooses which functions he needs and installs the appropriate packages. You can expand the functionality of the device without changing the firmware: new packages are added in console mode. Among the main features are wireless repeater and access point mode, print server, IP-PBX. Full list available functions you can find it at openwrt.org.

3. Tomato – also free option alternative firmware built on Linux kernel. To the main features configuration file This includes flexible access and traffic control, the ability to work with torrent networks and a DLNA media server. More detailed information you can get it at tomatousb.org.

trying to apply alternative firmware to the router

Let's consider this process using the example of firmware version DD-WRT. Everything is done in approximately the same way as in the case of firmware from the manufacturer.

1. Find and download the latest firmware from the site dd-wrt.com/site/support/router-database, selecting the DIR300 model (download the dlink-revb-factory-webflash.bin file).

2. Next, we carry out all the same steps that we discussed above when we considered flashing the router with the factory firmware (only now we will flash the file not from the manufacturer, but from the current algorithm downloaded in step 1).

3. After successful installation, the router will reboot. It now has a new IP address of 192.168.1.1. Therefore, it is necessary to change the computer’s IP address to 192.168.1.2. Once the connection is established, you can proceed to setting up the router.

how to restore factory firmware to router

Anything can happen: the lights in the house could be turned off, and the network sometimes fails, and sometimes the alternative firmware does not work; you always need to be prepared for such moments. Let's take a closer look at the option of returning to the factory firmware.

1. Reset the router settings by pressing the “reset” button.

2. Disconnect the router from the Internet by disconnecting the corresponding cable. You only need to leave the network connection to the computer (the cable connecting the PC and the LAN1 port of the router).

3. Install on your computer static address 192.168.0.2, subnet mask 255.255.255.0.

4. Disconnect the power supply from the network, hold down the “reset” button and, without releasing the button, connect the power from the network, wait for the router to boot (about 10-15 seconds). Release the “reset” button.

5. Open Firefox browser or Chrome (IE, Opera did not work for some reason), go to the address 192.168.0.1. We select the firmware file downloaded from the official website of the equipment manufacturer (I don’t know whether it affects it or not, but I had the path to the file on English, type C:\temp\DIR300B1_v201_97rg.bin) and click the “Upload Now” button. The process of restoring the factory firmware will begin. After rebooting the router, we will get a working router in its original form.