• home
  •  > 
  • Disks and files
  •  > 
  • Password recovery in Windows 7. How to easily reset a forgotten password in any version of Windows

Password recovery in Windows 7. How to easily reset a forgotten password in any version of Windows

All passwords, especially complex ones, are often forgotten by us. Sometimes it happens that we write down their meaning only on a piece of paper, which is soon simply lost. In general, the situation is typical. Beginners are sometimes frightened by the fact that if they forget their password, it is impossible to log in to the system. They don't know what to do in such cases. Formally, you cannot log into the system without a password (if it is set and enabled), but this situation can still be corrected. Find out exactly how to do this in our article. So, how to remove the password from Windows 7?

About the SAM system

On the seventh version of the Windows operating system, as well as on XP, the SAM system is used to store keys and user names. All information contained in it is reliably protected from hacking. Therefore, in order to find out a forgotten password, you will have to spend a lot of time and effort. However, there are easier hacking methods. And their main essence is to reset the password and replace its values ​​with new ones. That is, you will not be able to unravel the old information for the “Admin” or “Guest” user, but you will be able to log into the computer after the first reset. To do this, you will have to use several programs, which we will tell you about a little later.

It is also worth noting that when the OS is running, you will not be able to “get into” the password storage and change any information there. That is why programs for resetting keys must be downloaded from another computer onto a separate DVD/CD or onto a flash drive.

And now about utilities

The most famous program designed to reset passwords on Windows computers is Offline NT Registry and Password editor. This utility can work with almost all operating systems. This includes XP, Vista, and Windows 7.

How to use it?

Before you can remove the Windows 7 password, you need to have access to another computer that does not use security keys or you know their values. It doesn’t matter whether it’s a laptop or a desktop system unit. The main thing is that he has access to the Internet. So, go to the World Wide Web and enter the key in the search engine (for example, download NT Registry and Password editor). Download the program and save the exe installer to a flash drive or disk. After you have burned the image to disk, you can begin resetting the password. Unfortunately, this program does not have a graphical interface, but it is not very difficult to understand the principle of its operation.

We insert the flash drive or disk into the “password-protected” computer and wait until it lights up. Sometimes, to enable this program, you need to press the F6 button at one of the moments when the OS starts (similar actions are performed when installing a new operating system on the computer). In general, this utility launches itself, and all you have to do is press the Enter key.

What to do with the command line?

Boot from the program's removable media and select the partition number on which your operating system is installed. If an error occurs, you will have to start the computer again. Next, the program will ask you to specify the path to the folder where the key storage file is located (that is, to the SAM system). The following line should appear here: X:/Windows/System32/config . This is the path to the password file. If the line is not completed completely, complete it with the appropriate symbols. Now select the item called Password reset (it's the first one in the list).

Then everything will be simple. After Password reset, select Edit user data and password. He is also first on the list. Now you need to enter here either its identifier in the format 0xabcd. The last 4 digits are the RID listed in column I. It will be useful to us if the user name is displayed incorrectly or cannot be entered correctly.

Now click on the item 1 - password reset. You can also change it. To do this, select section number 2 “change password”. Then press the “!” sign at the same time. and the enter key. This will exit edit mode.

To remove the password, then enter the character “q”, press enter, then “y” and the enter key. That's it - the password is almost reset. To exit, enter “n” and remove the flash drive or disk from the drive. Next, perform the combination Alt+Ctrl+Del - with this command you will restart your computer. That's it - your Windows 7 account password has been successfully reset! All this work will take you no more than 1 hour, including downloading and installing the program.

Are there any risks?

There are no risks when resetting your password, even if you use this method for the first time. Files, folders and data will not disappear after this, as when uninstalling the operating system from drive C. After resetting the password, you will see the same familiar desktop with all the saved shortcuts. That is, by touching the depths of the system (SAM key file), even with intuitive actions you will not harm your computer. Everything is very simple and safe.

How to remove password from Windows 7? Method number 2

Here is another option for resetting a password on the Windows 7 operating system. To do this, you will have to prepare an installation disk with Windows in advance. In this case, you will enable the hidden administrator account by editing the registry from the OS installation environment. In the future, you can log in to the system under this account and edit information about the passwords of any account that is registered on this computer at any time. This will save a lot of time. By default, “Admin” does not have a registered password, which only works to its advantage.

What do we need for this?

All you need to have is the original installation disk with the operating system. It is from this that we will boot and restore/reset protection in the SAM system.

So, how to remove the password from Windows 7? To do this, we need to boot from the installation disk and press the key combination Shift+F10. This will open the command line. Here you need to enter the value “regedit” and press enter.

After it starts, you need to go to the HKEY_LOCAL_MACHINE section. To do this, select “File” - “Load hive.....”. On the English version of the installation disk it will look like this: File - Load hive... Now open the SAM file. It is located in the folder at /Windows/System32/config (that is, where the operating system is installed). When you open the SAM system, your computer will prompt you to enter a value for the hive to load. Here you can type any combination of characters and keys.

After that, select the partition located at KEY_LOCAL_MACHINE/hive name/SAM/Domains/Account Users/000001F4. At the same time, right-click twice on the F key. An editor will be displayed on the screen in which you will need to go to the first number of line 038 (this is number 11). This value must be changed to 10. Do not change any more data. Other numbers cannot be added or removed. To disable the password in Windows 7, select the “HKEY_LOCAL_MACHINE/name hive” hive. Then select “File” - “Unload Hive” from the menu. On English versions of Windows you need to select File - Unload hive. Now confirm the unloading of the hive and restart the computer. First you need to remove the installation disk from it.

But that is not all. To reset your Windows 7 password, follow a few more steps:

  1. Log in as Admin.
  2. In the control panel, select the “user management” section. Here you can remove Windows 7 password.
  3. Change your forgotten password to a new one or reset it.

It is worth noting that here you can change the key not only on the administrator account, but also on other accounts.

Like Method number 3

This is perhaps the most difficult method to reset key data from a SAM file. And the whole complexity and danger lies in the fact that here we will be replacing system files.

As you know, in every Windows the function Sooner or later everyone encounters it is installed by default - if you press the Shift button on the keyboard five to eight or more times, a short but very unpleasant sound will be heard from the speakers, and a small window will appear on the screen .

This window belongs to the auxiliary program sethc.exe. The latter forms the basis of the OS system directory. It also starts on the welcome screen, namely when you are asked to select a user account and enter a password. You can replace this useless program with something more interesting, for example, cmd.exe (command line). Naturally, it will not appear every time you start it, but only if you boot from the installation disk and press the key combination Shift+F10.

How does it work?

You need to start resetting your password by identifying the drive letter on which the OS is installed. To do this, simply enter the value “dir. C:" and view the contents of the root partition.

Then copy the original sethc.exe file to the root of the disk folder, and replace the second one with cmd.exe.

Then restart your computer and press the Shift key several times (until the command line appears on the screen). Enter your username and new password into it as follows: net user username newpassword. A good example: net user admin 12345.

The values ​​may vary, but "net user" at the beginning of the line remains the same. Also, when entering a password, you cannot put a space. And the username must strictly correspond to reality. If it's an administrator, then it's admin. If a guest, then after “net user” the meaning “guest” is entered in Cyrillic and so on.

A similar password reset algorithm can also be observed in the Windows XP operating system. Therefore, even if you are familiar with the “seven” only recently, then, knowing XP, it will be very easy for you to work with this OS.

How to view Windows 7 password? Unfortunately, this is impossible to do. You just have to reset and set a new value.

That's it - now you can safely log into the system. Then, at your discretion, you can reset it to zero or change these values ​​again.

Judging objectively, the fastest and easiest option for resetting passwords is the first method. However, this does not mean at all that the other two are not effective.

Conclusion

So, we have found out how to remove the password from Windows 7. Choose any of the three methods above and reset passwords at any time in minutes. Good luck!

Anyone can forget their Windows 7 or Windows 8 password. Fortunately, its restoration does not require any specific skills or abilities. With due care, within a few minutes you will be able to unlock your computer.

All modern operating systems have password protection, and it doesn’t matter what kind of computer you have. This is necessary to prevent unauthorized people from using your personal device. The password does not allow you to open the system by simply turning on the PC. But perhaps you have forgotten this password and do not know what to do. This may happen unconsciously, or perhaps you recently installed a new OS and have not yet had time to automatically remember the password. How can I remove the lock that prevents me from logging in?

If you have a computer running Windows 7 or Windows 8, then the password recovery process will not take you much time. Sometimes, to unlock your computer, you may need the installation disk from which you installed the operating system. It is often impossible to recover a password without such a disk. So, what to do if you forgot your computer password?

Password recovery on Windows 8

To log into a computer running Windows 8, you do not need to reinstall the operating system. Follow these steps:

  1. Make sure that the PC is connected to the network; it cannot be disconnected while you are resetting the password;
  2. When you log into Windows 8, click on the power icon (located in the lower right corner);
  3. Press the "Shift" key and do not release;
  4. From the menu that opens, select “Reboot”, the “Select action” window will open.
  5. You need to enter “Diagnostics” by clicking on it with the mouse;
  6. Click on the line “Return to original state”;
  7. Click Next;
  8. Wait until the Windows 8 system recovers. If the device does not have an installation disk, the system will ask you to insert it, otherwise the recovery will not complete;
  9. Then "Just delete my files" will appear. You need to select this item.

If everything is done correctly, the Windows 8 computer will return to its original state and you can create a new user. However, it is worth considering that all data from your PC will be deleted without the possibility of recovery. Therefore, you first need to back up your files to an external storage device.

Password recovery on Windows 7

A user, if he has forgotten the password on his computer, can log into a Windows 7 computer in two ways: unlock the system using the Windows 7 installation disk and save the password on a flash drive (or any other external storage device).

Using the Windows 7 installation disc

Follow these steps:

  1. You need to turn on the computer;
  2. Then insert the disc;
  3. When it loads, click on “System Restore”, a new window will open;
  4. Select the OS for which you forgot the password (if more than one OS is installed);
  5. Click “Next”, the following window will open;
  6. Select “Command Line”;
  7. Type “regedit” and click Enter to go to the registry;
  8. In the editor, highlight “HKEY_LOCAL_MACHINE”;
  9. Open the "File" menu;
  10. Click “Load hive...”, a new window will appear;
  11. Go to C: Windowssystem32config and left-click “system” twice;
  12. Come up with a name for the new branch;
  13. Go to HKEY_LOCAL_MACHINE, open this thread;
  14. Highlight "setup";
  15. Right-click on “SetupType”, then “Change...”, the following window will appear;
  16. In the “Value” line, press 2, then “OK”;
  17. In the registry, right-click on “CmdLine”, then “Change...”;
  18. In the “Value” line, enter “cmd.exe”, then “OK”;
  19. Exit Registry Editor, launch it again;
  20. Go to HKEY_LOCAL_MACHINE;
  21. Select the created branch, then “File” – “Unload bush...”;
  22. After closing all windows, reboot the system. When rebooting, remove the installation disk;
  23. When the computer turns on, the command prompt will appear. Write in it “net user name of the created branch password” (for example, “net user Vasily Administrator 2222”);
  24. Then click Enter;
  25. Close the window when Windows 7 starts, enter the password. You should now be able to log in.

Flash drive for password

If Windows 7 users have forgotten their password, it is possible to log into the system and unlock the password using a special function for creating a flash drive. To create such a flash drive:

You can remove these three points and do the following instead:

In both cases, the “Forgotten Password Wizard” will open.

  1. Click “Start”, go to “Control Panel”;
  2. Select the “User Accounts” tab, a new window will open;
  3. Click on the item “Create a password reset disk”;
    • Press the key combination “Ctrl+Alt+Del”;
    • Select "Change Password";
    • Click on the required account and select “Create a password recovery diskette.”
  4. Check that you have inserted the USB flash drive;
  5. In the “Wizard” click “Next”;
  6. Select the device (USB flash drive), then “Next”;
  7. Enter the password for the system, again “Next”. The process of creating a file on the flash drive will begin. The password will be located in this file;
  8. After recording, the userkey.psw file will appear on the USB device. Click "Next" - "Finish". You don't need to do anything else.

Even if you decide to change your password in the future and forget it, you can recover it from this flash drive.

Recovering a password from a flash drive

If you have forgotten your password, it is very easy to recover it; the main thing is that you need the flash drive on which the file was written. If you have a flash drive, follow these steps:

  1. Turn off the computer, then you need to insert a USB flash drive and turn on the PC;
  2. Click on the desired account;
  3. Then enter any password (any numbers and letters), press “Enter”, the message “Invalid username or password” will appear, you will be asked to recover it;
  4. Click on the inscription, the “Password Recovery Wizard” will open;
  5. Then “Next”, point to the required flash drive;
  6. “Next” again, then enter a new password and confirm it;
  7. Click "Done."

You can then log in with the new password.

Instead of a flash drive, you can use any other device, for example, copy to a CD or external hard drive.

When recovering your password, the most important thing is to carefully follow all the steps. This is even more important if you are unable to log into your Windows 7 or Windows 8 computer and need immediate access to your PC. In such situations, there is no need to rush - the problem can be easily solved with due care.

We have the opportunity bypass password in windows 7 without resetting, if you forgot it? Of course have! Now we will tell you how to find out the account password or administrator password of Windows 7/8/10.

Method 1. Bypass Windows 7 password in safe mode

You can change your Windows password in Safe Mode using the following steps:

Step 1.Press F8 before the Windows boot screen.

Step 2: Select Windows Safe Mode - “Safe Mode with Command Prompt”→ Press “Enter” next.

Step 3: Type net user and press Enter, all accounts on Windows PC will be displayed.

Step 4: Enter your locked user account with the new password in the command line, for example, “Happy 123456” means your new password for the network user “Happy”.

Step 5: Once your computer restarts, you can automatically log into your computer with a new password.
(Note: When you recover Windows password from Safe Mode, an administrator account with a known password is required. If not, go to method 2)

Method 2. Bypass password in windows 7 using password reset disk

If you have created a Windows recovery disk with a password in the past, below are the steps to crack a forgotten password in Windows:

1. If you enter an incorrect password when trying to log in, Windows will display an incorrect password message. Click OK to close the message.

2. Click Reset Password, and then insert the password reset disc.

3. Follow the steps in the Password Reset Wizard to create a new password.

4. Log in with the new password. If you forgot your password again, you can use the same password reset disk. You don't need to create a new one.

(Note: The disk only works in a specific account, if you changed the Windows XP password for that account, it still works. But if you don't have a password reset disk, then the only way to bypass your Windows 7 password is using a third party application. )

Method 3. Hacking a Windows 7 password without a disk or flash drive

Windows Password Key– a third party utility, goes to the assistant when your computer is completely locked without a created password reset disk. Someone may suggest that you reinstall the system, but this is completely unnecessary. Windows Password Key Professional can help you reset your Windows password and successfully log into your computer again without the risk of losing data. Follow the three steps to pass Windows password; You'll soon be enjoying your PC.

Step 1: Log into any other accessible computer (not locked), download and install Windows Password Key.

Step 2. Copy CD/DVD or USB flash drives using this program.

Step 3: Insert the disc into your locked computer and follow the software wizard to bypass the forgotten Windows password with a burned CD/DVD or USB drive.

Video tutorial on how to bypass the administrator password in Windows 7 using WindowsPasswordKey

Whenever you have forgotten your Windows password, remember to use the Windows password key, and then you can easily and quickly unlock your forgotten Windows password in minutes!

Passwords help protect your account in operating systems from unauthorized users. However, it also happens that they are forgotten, and it is not possible to get into the system from an administrator account, and you don’t have the installation media with you. In this case, you will have to reset the password using slightly non-standard methods.

Removing the password from Windows 7 without installation media

If you are unable to download a password reset disk for Windows 7, you can use one of the methods suggested below. Both involve solving the problem using system utilities. To do this, you do not need to download a Windows 7 password reset disk or a full system image. However, it is recommended to strictly follow the instructions, since both methods involve working with the interface "Consoles".

There is no need to try to reset your Windows 7 password using third-party software, as this will lead to certain problems.

Method 1: Command Line

This is the most universal, simple and secure way to change your Windows 7 password without knowing the old one. If necessary, you can later simply remove the new password from the operating system. To perform this method, you will need to be able to log into the OS interface, even from a guest account. Usually this is always there by default.

The Guest account has some limitations compared to the Administrator account. By default, they apply to making any changes to the OS, for example, installing/uninstalling programs, editing some documents, downloading content from the network. Restrictions on use "Command line" no by default.

The instructions for this method are as follows:

    1. Press the key combination Win+R.
    2. In the line that opens, enter cmd and click Enter.


    1. Will start "Command line". First, you need to find out the number of users, their powers and logins in the operating system. To do this, enter the command net user and click Enter.


    1. A list of all operating system users is displayed. You need to find the administrator account login. This will be easy to do if there are only two accounts in the OS.
    2. Now write the command net user administrator_login new_password. Example command: net user Admin 123456. Press Enter.


  1. After applying the command, restart your computer and log into the administrator account with a new password.

Method 2: Recovery Menu

This method can be dangerous, as it involves disconnecting the computer from power while it is running. However, a single use should not cause much harm.

The bottom line is this:

    1. Restart your computer if it was turned on or turn it on if it was turned off.
    2. When Windows starts loading, turn it off abruptly. For example, press the power button or unplug the power cable.
    3. Then reconnect the power and turn on the PC.
    4. Instead of the standard Windows startup, the screen should start "Windows Error Recovery", that is, recovery from an error.
    5. You will be offered several options for starting the operating system. Select "Launch Startup Repair". In the Russian version it may be called "Run boot repair".


    1. The system will begin loading. You may see a window asking for permission to perform a system restore ( "System Restore"). Cancel by clicking on "Cancel".


    1. A recovery error message appears. Click on the item "View problem details".


    1. A text file describing the problem will open. Here you need to click on the item "File" in the top menu. From the drop-down list, click on the item "Open".


  1. Will open "Conductor" Windows with access to all system files. You need to go to the following path: C:\Windows\System32.
  2. Here, find and rename one of these files utilman.exe or sethc.exe, adding the postscript bak or old to the name of one of them. If these files are not displayed in Explorer, then in the column "File Type" set the value "All files".
  3. Now find the cmd.exe file. Copy it and paste it in the same directory.
  4. Rename the copied file to "utilman" or "sethc". No need to rename the file to "utilman", if in step 10 you added a postscript to the file "sethc" and vice versa.
  5. You can close "Notebook" and press "Finish". After this, the system will reboot.
  6. Wait for the Windows start screen to load and click on the icon "Special abilities", if you renamed the file to "utilman". If you renamed it to "sethc", then you will need to press the key five times Shift.

This way you will have access to "Command line" without having any access to the system. In the interface "Consoles" you will have to do the following:

    1. If you do not know the exact name of the administrator account, then enter the command net user. It will display all data regarding system users, including their status.


    1. Now write this command: net user Administrator account name new password. Example command, net user Admin 123456. Press Enter.


  1. Restart your computer and try logging in with the new password you set.

The methods discussed above help you reset your password on Windows 7 without using a disk with an OS image. However, it is recommended to create a system recovery image on a flash drive (installation disk) and perform a reset through it.

How many times have you forgotten your passwords for a coded door at a friend’s entrance, your e-mail or an account on some VKontakte? But if in this case recovery services could help you, then in the event you forget your password from your computer, only specialists will help you... If your hands are “growing from the right place,” then you can try to do something yourself. The easiest way out of this situation is to reset the Windows 7 administrator password.

Options

There are several ways to solve this problem. Today we will talk about resetting the administrator password, which can be done with direct access to the computer, so these tips will not be useful to you for hacking someone else’s PC or server.

  1. Mechanical.
  2. Using the created software.
  3. Using the operating system distribution.

Any of these options is equally good and bad at the same time. Some of them are larger and better suited for laptops, while others are ideal for a desktop computer. In addition, passwords are different, so if you protected your computer with a password using BIOS, even now it is not completely safe and there are ways to overcome this protection of a stationary personal computer. However, this method will not help you in the case of a laptop, because simply disassembling and putting it back together in working order is a very difficult task, not to mention making any changes.

Via BIOS

To immediately dot all the i's, it is worth saying that resetting the Windows 7 administrator password through the BIOS is not possible. Some concepts should be separated. You will not be able to reset the passwords on the user account by any operations in the BIOS, but if you have completely denied access to the computer using the I/O system and have forgotten the password, then here are a couple of tips for you.

It should be immediately noted that these methods are quite dangerous for your computer and work with 100% reliability only on stationary PCs. Yes, and these tricks can only be done with direct access to the system unit.

So, a quick reset of the Windows 7 administrator password is carried out as follows. Unscrew the cover of the PC system unit, having first disconnected it from the power supply, and find a coin-cell battery on the motherboard. You should remove it for a few seconds and then put it back in place. This way, you will reset all temporary BIOS settings on your computer, including the password.

Second method

Also, resetting the Windows 7 administrator password set in the BIOS can be done a little differently. You will need the instructions from your motherboard. In the diagram you need to find a special jumper, with which you can reset the BIOS settings. The jumper looks like a pair of exposed contacts. In order to reset the password, you will have to change the jumper on the jumper and turn on the computer. It will not start, but all settings will be set to default. Remove the jumper and turn on the PC again. When you first boot, you will be thrown into the BIOS control panel. Don't touch anything, just press the exit button and save your existing settings.

With disk

It is worth noting that if you have set a password for the user, then simply removing the battery is not enough. If you still have the operating system distribution, then you can use the following couple of tricks to reset the Windows 7 local administrator password.

So, first, remember the process of installing your OS. If you did it yourself, then at some point you should have been asked if you wanted to set a password for the “admin panel”. This entry is usually inactive and hidden from prying eyes, and users work on an account with extended rights. If you lose your account password, the administrator can always delete it himself. But what kind of “administrator” can we talk about on a home computer? Therefore, you have to use the system administrator user account, which is installed on the system by default.

To launch it, do the following. Insert the installation disk and on the first welcome screen press the combination “Shift+F10”. This will allow us to bring up the command line. Next, we need to launch the registry editor with the “regedit” command. After this, we perform the following manipulations in the editor.

  1. Select HKEY_LOCAL_MACHINE and click "File" - "Load hive".
  2. Find the SAM file in the Windows folder - Swstem32 - config.
  3. In the new branch that appears, go to the folder 000001F4. It is located in SAM - Domains - Account - Users. The "F" parameter needs to be changed.
  4. Double click on it. We are interested in line 0038. In it we need to change the number located in the very first column. "11" -> "10".
  5. We exit and save.
  6. Select the root folder of our branch and click the “File” menu button, then “Unload hive”.

After all the manipulations have been completed, you can restart the computer. Now you can log into your administrator account and reset your Windows 7 administrator password manually using operating system tools.

Another variant

There are still ways to log into a password-protected account. The fact is that you can reset the Windows 7 administrator password directly from the console running as an administrator. Now you will be offered a rather complicated method, but one that allows you to leave a small loophole for the future.

Perhaps you have come across a program that is responsible for sticky keys? When you press "Shift" or "Alt" many times in a row, you will receive a message asking you to turn off sticky. The fact is that this function also works in the user selection menu when we just turned on the computer. So if we replace it with something useful, we could benefit from it. For example, calling the command line.

To do this, repeat the steps in the previous paragraph and enter the operating system installation menu. Launch the command line. By default, your operating system should be installed on volume "C:\". If not, just replace it with the desired letter. After launching the line, enter a sequence of commands.

  1. "Copy C:\windows\system32\sethc.exe C:\" - a copy of the file with the code that reacts to sticking is created.
  2. "Copy C:\windows\system32\cmd.exe C:\windows\system32\sethc.exe" - copy the contents of the file that launches the command line to the sticky file.

After entering the last command, you must restart your personal computer (laptop). In the user selection menu, when you are asked to enter a password, we activate the sticky function by quickly pressing a few keys. The command line will open, and enter the command “net user UserName NewPassword”. As you might guess, instead of UserName you need to specify your user name, and instead of the second parameter, a new password. After this, you will be able to log into your account on your personal computer. If you want to return everything to its place, you can turn on the command line from Windows and enter “copy C:\sethc.exe C:\windows\system32\sethc.exe”.

But how to reset the Windows 7 administrator password without a disk?

Utility

If the operating system distribution kit is missing, it is always possible to reset the password using a special utility. You will need a program to reset the Windows 7 administrator password. For example, Offline NT Password and Registry Editor. We write it to a disk or flash drive and restart the computer, choosing to boot from external media. Resetting the Windows 7 administrator password from a flash drive is quite easy to learn if you can read and know English. So let's begin.

  1. After launch, a table with hard drives will appear in front of you. Enter the number of the one on which the OS is installed.
  2. Determine the path to the SAM accounts file. "C:/Windows/System32/config".
  3. Enter "1" twice in a row.
  4. We select the user we need in the table. The administrator password reset program only works with Latin, so if the name is not displayed correctly, you can enter its RID in the format 0xRID.
  5. Once again enter "1".
  6. The following is a sequence of commands: exit, save changes, do not continue.
  7. Reboot the computer by pressing "control-alt-divide".

The Windows 7 administrator password reset program did its job. You can enter your "domain" on the computer.

Warning

Finally, it should be noted that any changes that you make to your computer when trying to reset the Windows 7 administrator password, you do at your own discretion, and all responsibility falls on your shoulders. After them, most likely, no service will accept your computer under warranty. especially after opening the cover of the system unit. After all, it is very difficult to prove that you did something with the operating system, but the opened “seals” on the system unit will look very eloquent. This means you will have to pay specialists a round sum for quite simple actions. When following these instructions, be extremely careful, and if something is not clear, it is better to clarify or look for additional information.

Bottom line

We hope this article helped you with your problem, no matter which method you used, be it a remote battery or a super-sophisticated utility from an unknown manufacturer. The main problem you may encounter is data security. Unfortunately, some information may well be lost during this process. Therefore, try to get it from friends or download a version of the operating system on LiveCD. Then you can simply save all the data that is important to you.

In this article, we did not consider the simplest but longest method - a complete reinstallation of the system. Unfortunately, sometimes there are situations in which it becomes completely impossible to access your computer, and reinstalling Windows becomes the only possible option.