The screen on the Samsung does not turn over. What to do if screen rotation does not work on Android

Users are accustomed to the fact that if you turn the iPad itself over, its screen also turns over. This is very convenient and allows you to use the gadget from any position. But often the screen rotation function stops working normally, which causes a lot of inconvenience.

From this material you will learn the reasons for such troubles with the iPad, as well as ways to change the screen orientation on Apple tablets.

1 This option is disabled in the gadget settings. It doesn’t matter whether it was done by accident or on purpose, but the coup will stop working. Therefore, if a problem occurs, the first thing you need to do is look at the settings menu. And to do this you need to swipe, starting from the bottom border of the display to the very top. 2 The switch on the panel was turned off. If you are the owner iPad generation 3 or 4, there is definitely a switch on the body of your device. It is located on the side, on the right side of the device, slightly above the volume control buttons. Depending on how the switch is configured, it may prevent the display from rotating or mute the sound. So if you're having trouble rotating the screen on your iPad, try changing the position of this element. To do this, you just need to turn it the other way. Flipping the element will enable the display flip function. 3 The gadget is frozen or faulty. If you have carefully followed everything described above, and the iPad display still does not rotate, some software is probably frozen. To solve this problem, you need to reboot the device. To do this, click on the power button and do not release it until the iPad power off button appears. Once done, turn off the gadget and turn it on again. Sometimes like this simple operation solves all problems.

After this action, a control point will appear. Here you will see the most important functions and you can activate or disable any of them. Including, here you will find a button to deactivate display rotation. It is depicted in the form of a lock with a round arrow. If the function has been disabled, the button will glow red. To activate the option, simply click on this button. Its image will turn gray, and the rotation of the display will work as usual.

Note also that the gadget control section consists of 2 screens, indicated by dots. The settings we need are located in the first one. The turned on tablet must be configured in this section.

If you do not want the named element to interfere with the rotation of the display on the iPad, reconfigure it to mute the sound. To do this, go to the main settings of the gadget and find the switch block on the side of the panel. Here you can deactivate the sound settings.

But if none of the methods presented above helped, and rotation does not work, there may be a serious breakdown of the iPad itself. Only contacting a repair shop will help here. An experienced technician must first carry out diagnostics by completely disassembling the case, and then decide to repair or completely replace any element.

It is highly not recommended to disassemble the device at home. Only in exceptional cases, when the breakdown is not serious, and you have experience in such matters. Remember that all parts of the gadget are very fragile, and any careless action can lead to their breakage. Then not only will you not solve the problem, but you may break your iPad, which will require an expensive repair.

We also remind you that disassembly iPad cases– a more difficult matter than with the iPhone. Special devices will be required, and you will also have to deal with the heating of the device. So it’s better not to take risks and take the device to a professional.

Rotate the screen on iPad: lock

Let's consider the opposite situation, when the rotation function needs to be disabled and not unlocked. And let's start discussing the situation with outdated iPad models (3 and 4). Many users are still actively using iPad versions 3 or 4, so this question is relevant for them. Often such troubles arise among owners of mini versions.

Let us immediately note that this process in older gadgets is a little more complicated than in iPads running on OS 7.

So, how can you block screen rotation and turn off the rotation function? What to do in such a situation?

Some users, having purchased a used tablet from Apple outdated version(2,3,4), try to spin it in different sides to turn the display upside down. But their actions do not achieve results. It turns out that the display unlock button for iPad 2 is located on the multitasking panel (in the lower dock). And to access it, you need to double-click on “Home” or use the 4-fingers up gesture. After opening the dock, you need to swipe the icons from the left side to the right.

Having completed all of the above, the user will be taken to an additional section, where he will find a button called iPad orientation lock. You need to click on it, after which the picture with the lock will disappear in the dock and on the status bar. The display will now begin to rotate. As for the red button located at the bottom left, this is KillBackground.

If you are in additional section If you don't find a blocking button, there should be a mute button instead. In such a situation, you need to do the following. First, change the state of the switch on the iPad body. An icon will appear on the screen and above the volume buttons indicating that the orientation is unlocked. Once again, we have achieved activation of the display rotation function on the iPad.

Note that the switch located on the side can be configured, and this is done in the corresponding menu. You need to go into the main settings and select this element. There you can set the value to lock orientation or turn off sound. Depending on your actions, the button for the additional bottom dock will also change. In no time, you can easily both turn on the display rotation option and turn off the screen flip function. In the latter case, the screen will stop responding to changes in the position of the device itself.

Setting up iPad screen rotation in iOS 7

If the user decides to update the firmware of their iPad to OS version 7, the display rotation control buttons will be even easier to reach. They are now located in the control section menu. This also applies to the iPad Air tablet model.

And the named panel, in turn, is located at the very bottom of the screen. You need to swipe from bottom to top, and this section will appear. Here you can easily find the iPad display rotation lock button. In a situation where the screen does not rotate, this element must be activated. The configured device will now work perfectly, and the display will exactly follow the movements of the gadget itself.

If you don’t find such an element in the section, carefully read the instructions above again. It tells you how to deal with a similar situation on the iPad and how to enable the screen rotation option.

iPad doesn't flip the screen: conclusion

It must be said that the iPhone also has an option to block display rotation. But, unlike the iPad, owners mobile gadgets much less often they encounter violations of this function. Although this is probably due to the fact that tablet users find this feature more useful.

It is unknown for what reason, but often iPad display completely refuses to roll over. In this case, the user does everything correctly, looks for the desired button and activates the flip option. But the screen still doesn't respond. In such a situation, all that remains is to reboot the system - sometimes this action solves the problem. Others may be advised to reflash the device and completely erase all previous settings. Still others can only be helped by a service that brings the gadget’s accelerometer back to “life.”

In a difficult situation, when nothing helps, you can try using the item in the “Physiology and Motor Skills” section called AssistiveTouch. After opening it, a virtual button will appear on the display. By clicking on it, you can call up the option to change the display orientation. This way the user will be able to forcefully change the screen position.

Now you know all the ways to enable screen rotation on iPad. We also hope that the article helped you understand the main reasons why the iPad does not flip the display. Setting up the screen rotation function on Apple tablets, as you can see, is not an easy task. But still set it up iPad screen, even if it is blocked or disabled, you can. And don’t forget that auto-rotate screen is a very useful feature.

Sometimes iPhone screen/iPad may freeze and not reorient with book format to landscape. One of the features iOS devices is the ability to rotate the screen when you turn on the device. Your device will show the screen in landscape mode when you hold it in horizontal orientation(horizontally), and rotate to portrait (vertical) when rotating the device. If you are using an iPhone, iPad or touch screen iPod, auto-rotate screen does not work. In this article we list ways to solve if the screen on an iPhone or iPad does not rotate.

7 ways to rotate the screen on iPhone/iPad

Method 1: Turn off portrait orientation lock

You should check the simplest one first. possible reasons that the iPhone or iPad screen does not rotate. It lies in the fact that an application in which the mobile device is “stuck” in landscape or portrait mode simply does not support both orientations. The easiest way to test screen rotation is standard application"Calculator". Launch it and try to rotate the device screen. Make sure the screen lock is turned off. To do this, open Control Center. If a closed padlock icon appears, tap it to turn portrait orientation lock off.

Method 2. Do a forced reboot

First you can turn off your iPhone or iPad, give it a break, turn it on again. If this doesn't work, you can force restart your device. Press and hold the Home button and the Wake/Sleep button until Apple logo. For iPhone 7 users, press the Home button and Volume Down button to do this. For iPhone8/X users: Press and quickly release the Volume Up button, then press and quickly release the Volume Down button, finally press and hold side button(Sleep/Wake) until the Apple logo appears.

Method 3: Disable display magnification for screen rotation

iPhone 6 Plus, 6S Plus, 7 Plus, 8 Plus have added the function of rotating the desktop with icons in horizontal mode(also called landscape mode). If such a model is turned on its side, then all the icons and wallpapers, turning over, will adjust to the horizontal position display. You can set up your iPhone screen to rotate it this way: Select “Settings” > “Display & Brightness” and set the “Display Magnification” option to “Standard”.

Method 4: Try using a different program

For example Safari or Notes. Some programs and individual screens in them support only one of the orientations.

Method 5. How to rotate the screen on iPad

If you have iPad device with the switch in the sidebar and you don't see the orientation lock icon in Control Center, make sure the switch is in the off position.

Slide the switch on the side to a different position (iPad only)

On iPad tablets The screen orientation can be locked with a switch on the side panel. If in the “Settings” → “General” menu in the “Side Panel Switch” section the “Orientation Lock” option is active, then to be able to change the orientation you just need to slide the switch to a different position.

You can use the effective Tenorshare ReiBoot tool to restore your operating system without losing data. It works great if auto-rotate the screen on your iPhone/iPad does not work.

Step 1: Click the "Solve All iOS Freezes" button on the main window to enter system recovery.

Step 2: Click "Fix Now" and download the firmware package

By default, the iPad 2 is set to auto-rotate the screen. That is, when the position of the device changes, the screen automatically rotates. Fortunately, if it does not do this automatically, then such a problem can be easily fixed.

iPad 2 Owners of mobile devices such as the iPad 2 know that their screen should automatically rotate depending on its position. Thus, it turns out that if the mobile device is in landscape orientation, then the screen should be in the same orientation.

Some people may experience this various problems, for example, if the screen does not change depending on the position. If this is the case, then there is no need to worry and be nervous in vain; such a problem can be solved very easily, unless, of course, it is a hardware problem (that is, the problem lies directly in the device itself). Enabling (disabling) auto-rotate screen on iPad 2 First, you need to check your attention to the lock icon, which is located near the status iPad batteries 2. If there is such an icon, it means that auto-rotate the screen is disabled (blocked) in the device settings itself. Disabling (enabling) screen auto-rotate lock can be done either on the side panel mobile device, or directly in the multitasking menu. It depends on what function it performs side panel(can be set to either Mute or Orientation Lock). In order to find out what function the sidebar performs, you need to go to “Settings” and select the “Basic” tab. Next, scroll through the list, you can see the “Side Panel Switch” item and see what it is responsible for. If the checkbox is checked under Lock Orientation, then this panel will block auto-rotation. To solve the immediate problem, you need to set the value to “Mute the sound.” If the problem is still not solved, then you need to go to the multitasking menu using double click to the "Home" button. After the corresponding menu opens, where there are several special buttons, each of which is responsible for specific parameter. On the far left you can see special icon(image of an arrow with a lock or without a lock). To turn on auto-rotate, you just need to click on this image (respectively, to turn it off, too). In most cases, such simple manipulations can solve the problem with auto-rotate screen on iPad 2. In all other situations, you need to contact specialists who can diagnose the device and high-quality repairs(in case hardware faults are found).

Products Apple is of very high quality and reliable, but despite this, tablet owners often encounter a problem when the screen on the iPad does not turn over. As a result, the ability to communicate normally on the Internet, watch videos, read books and play is lost.

How does the malfunction manifest itself?

The screen of any Apple tablet model turns upside down when the position of the device changes. If you hold the gadget horizontally, then the display will be in the same position. If you rotate the device the other way, the orientation will become vertical.

The orientation on the tablet is detected using a gyroscope. If it stops working, the picture cannot change position and does not rotate. Such a gadget malfunction can manifest itself gradually:

The tablet display does not always turn over when changing position
In order for the picture on the screen to start spinning, you need to tilt the tablet several times
the device randomly changes the image orientation

What can lead to device failure?

If the image does not rotate, it is worth finding out the causes of the problem. In many cases it can be quickly resolved. It could be:

using programs that do not support auto-rotate
disabling the auto flip switch
display rotation lock
hardware settings failure
gyroscope failure

The device control section includes two screens indicated by dots. The settings you need to unlock auto-rotate are in the first one. A device on which the screen does not expand should be configured in this mode when it is turned on.

It is worth remembering that sometimes orientation does not change in the absence of its support. When starting to repair auto-rotate on iPad, you need to remember that some applications and programs do not support this function, opening only in portrait or landscape mode. To test screen rotation that has stopped functioning normally, you can close all applications and enter Settings. Place the tablet horizontally - if the screen does not change orientation automatically, the problem may be due to the switch being disabled.

Procedure for disabling the switch

If you are the owner of an iPad 2, 3 or 4 model, you can solve the problem by changing the position of the special switch. It is located on right side device on the side above the volume keys. Using the switch, you can activate both the function of locking screens and changing the volume based on current settings. If your tablet has such a switch, change it current position to the opposite, after which the auto-rotate display should work.

To prevent the switch from blocking the display from flipping in the future, reconfigure it to change the call volume. To do this, follow these steps:

go to settings
Find the "General" section and "Sidebar Switch"
reconfigure the turn function switch to mute

What to do if rotation settings are locked

Screen orientation lock on iPad has only been added to models with iOS firmware 4.0. In older versions, this required jailbreaking, but now this procedure is no longer necessary.

To find out if the rotation function is locked, look for an icon on the screen that looks like a lock and a curved arrow. Grey colour This icon indicates that the lock is active.

If, when changing the position of the device in space, the screen on the iPad does not turn over, perform several simple actions that will help you disable the blocking:

go to “Control Center”
tap the lock icon that appears on the screen, thereby deactivating the function

After deactivating the lock, the screen will rotate in automatic mode when you turn the gadget and turn on programs that support this function.

Hardware failure

The screen may stop flipping when there is a failure, for example, due to downloading a low-quality application. The solution to the problem with the rotation function in this case is to restart the tablet. To do this, press the iPad power button and hold it until the “Power Off” button appears on the display. Then disable and enable apple tablet. You can also flash the device.

If this does not help, go to “Settings”, go to the “General” menu item, then “ Universal access” and select “Physiology and Motor Skills” with the name AssistiveTouch. Open it and a virtual button will appear on the display. Click on it to activate the display repositioning function and force change its orientation.

Gyroscope failure

As a result of a breakdown of the device underlying the flip technology, the display stops rotating along with the rotation of the device. In this case, it is impossible to solve the problem yourself without special equipment and practical skills.

Therefore if automatic rotation the screen does not work, and the picture still does not unfold after performing all the above steps, you should think about immediately contacting a qualified technician. He will appreciate iPad condition, will correctly determine the reason why the screen does not unfold and provide the necessary services to resolve the problem.

What is required to repair a tablet

It is not recommended to disassemble an iPad with a non-functional screen on your own, since all the parts of the gadget are very fragile and any unskilled intervention in the “stuffing” of the tablet can cause its complete failure. Then you will not only not be able to solve the problem with unlocking the orientation, which changes incorrectly, but you will also break the tablet, the repair of which will require expensive replacement of components.

It's also worth remembering that professional tools are required to disassemble the iPad case to return the screen flip feature. Therefore, it is better to entrust the repair of a gadget on which the orientation does not change to a qualified specialist. A professional will quickly and efficiently restore a tablet on which the display has stopped working, and the picture does not rotate when changing the position of the gadget

Most often, repairs of one or another iPad models, in which the display orientation does not change when you rotate the device, takes one to two hours. The period may vary depending on the cause of the problem with auto-rotating images on the screen.

Where can I find a trusted professional?

If you require, contact specialists registered with Yuda. They have many years of experience in restoring Apple equipment.

Advantages of contacting proven Yudu masters:

quick setup of screen rotation with the possibility of a specialist visiting your home
using professional tools, modern computer equipment and original spare parts to repair iPad tablets
restoration of a gadget on which the screen does not unfold, on the day of treatment or at any other time convenient for you
full service taking into account manufacturer's requirements
low prices for services

By contacting Yudu specialists, you get a guarantee that the work will be done efficiently and inexpensively, and the iPad will work properly for a long time.

If the screen on your iPad does not turn over and you were unable to fix the tablet yourself, take the gadget to service center, or don’t waste time right now.

Today we will talk about turns and flips that can be done on iPad screens. The fact is that in any of the tablet models they often use the rotating capabilities of the screens than in similar iPhones, or iPods touch. The iPad tablet allows you to spin itself in any direction, and all the icons installed on the work screen spin after it. The iPad allows you to rotate both the screen with the icons printed on it and any of the running applications, which can even be turned upside down.

This feature is quite convenient in terms of rotation to horizontal/vertical positions, but there may be situations where instant changes on the screen are disturbing. For this purpose, a display orientation locking mode is provided, which stops the image rotation and fixes the fixed position.

Many users are not even aware that screen rotations may be blocked. Others often have the opposite question: if the iPad screen should flip, why doesn’t it happen.

It is precisely such newcomers to computer world we dedicate today's article.

Let's start with the fact that locked rotation is displayed at the top right with a lock icon in the form of a circular arrow - this is the position of the non-rotating screen. And we’ll start the review with older firmwares, starting with iOS 4 and up to version 6, since getting to the locking buttons is somewhat more difficult for them than in version 7.

The button that can unlock rotation is located at the bottom of the multitasking panel dock. You can get to it only after pressing “Home” twice, or with a 4-finger gesture up (for those models that provide such movements). After opening the dock, you should swipe the icons from the left side to the right.

We go to the additional panel, on the left side of which there is an unlock button. We click on it, which causes the icon to disappear not only on the buttons in the dock, but also on the panel in the status bar. After this, you can start turning the screen over. For those interested, there is a red button located at the bottom left corner - KillBackground.

In the case when additional panel The lower dock suggests replacing the blocking button with a mute button, the following actions are provided:

We change the position in which the switch is located on the body of the iPad itself, above the volume button. This will cause an icon to appear on the display confirming that spatial orientation is unlocked. After this, all turns will become available.

You can also reconfigure the switch, which is located on the side panel. Select from: Settings – General – Sidebar switch – “Orientation lock” or “Mute”. In accordance with the selected value, the button in the lower, additional dock will also change.

Setting up screen rotations in iOS 7 for iPad.

Having decided to update the firmware in our tablet version 7, we understand that getting to the necessary buttons controls are much faster because they are in the Control Center menu. The panel of which is always located at the bottom. Just a slight wave of your finger up and it opens in front of you, revealing a button for quick lock rotation and rotation of the screen.

What can you do in a situation where the iPad screen does not turn over?

iPhones can also block rotation, however, and this is their difference from iPads, they have problems with these actions much less often. The reason can also be attributed to the lower demand for this function in such models.

It is difficult to immediately indicate the reason for such “braking”, especially if all the actions were performed correctly. We can recommend the following - turn off and restart the device. Most often this is quite enough. There are situations when you have to update firmware or completely reset settings. Well, as a last resort, there are services that specialize in repairing iPad accelerometers.

It’s better, of course, to do without similar problems, however, in the case when you have completely figured out the buttons and mode switches, but the problem is not solved, try an element from the section called AssistiveTouch - “Physiology and Motor Skills”.

You can run it like this:

Go to Settings - General - Universal Access - turn on AssistiveTouch, displaying a virtual button on the display.

Clicking on it will bring up a window in which you should select “Device” and move on to the next button for locking screen orientation, with “Screen Rotation” located nearby. This will force it to rotate.

This section will come in handy if the accelerometer fails and will be very useful.