MTS satellite dish settings. Satellite TV MTS

I want to watch TV with pleasure. This requires not only a good show or film, but also excellent image quality. Cable television does not operate everywhere, so today there is an alternative that provides the opportunity to watch many broadcast channels even in the most remote corners of the country. Thus, you can watch satellite TV and enjoy a beautiful picture. Due to the variety of suppliers, it is possible to choose the appropriate operator. How to set up satellite TV from MTS yourself will be discussed in this article.

To install and configure satellite television in the MTS system yourself, you need attention and certain knowledge, otherwise the equipment can be damaged. First you need to check the connectivity, that is, determine whether your region is within the coverage area, and also whether there are any obstacles to installing the antenna, for example, a tall tree or a house. In addition, before installing and configuring the antenna, you need to make sure that you have purchased a kit with all the necessary elements.

So, setting up MTS satellite TV includes the following steps:

Select a location to mount the satellite dish where it will have direct visibility of the satellite.
Assemble the antenna according to the instructions that came with it.
Install the bracket for fastening the equipment as firmly and reliably as possible in the selected location.
Attach the plate to the bracket according to three parameters: rotation, rotation and tilt.
Connect the MTS set-top box and set up satellite TV using the installed mobile application online.
Check the signal strength in the “Antenna Settings” section on your TV.

At this point, setting up MTS satellite TV yourself is considered complete. If any problems arise, admin will answer all questions. Read on for more detailed connection information.

Antenna installation process

The quality of satellite signal reception depends directly on the correct configuration of the MTS antenna. Simply buying a set of devices and materials and setting up a plate is not enough. You need to choose the right direction to the satellite, connect the receiver, and make certain settings.

First you need to decide on a place. The satellite dish must face south. It's good when the windows face south. The main thing is that there is no tall building or tree nearby that will block access to the satellite. Otherwise, you will need to remove and install the plate on the roof of the house. Next, bolt the bracket and the plate itself to it. In this case, it is necessary to use not all the bolts at once in order to be able to adjust the desired degree of tilt angle of satellite TV from MTS. The next step is to attach the converter, which must also be rotated to the desired degree.

An important task is to configure the receiver head yourself. The equipment will not work correctly if it is turned even slightly away from the satellite. In this case, you can set up a satellite dish from MTS yourself in three ways. Using a smartphone will help you complete the task using the installed SatFinder application, indicating the name of the satellite in which you can calculate the required tilt and rotation angles. The second way is to use the MTS website in the “Satellite TV” section, then “Settings”, and then “coverage map”, “Setup Wizard”. The last method will help after installing the set-top box in the “Settings” menu. To set up the MTS antenna as quickly as possible, watch the video with instructions.

Required Equipment

The set of equipment from MTS for installing satellite TV is as follows:

antenna;
Cam module or set-top box;
converter;
bracket;
2 °F connector;
coaxial cable;
set of screwdrivers and keys.

In addition, you may need a plug, and also, if connecting two TVs, a divider.

Receiver setup

In order for the setup of MTS satellite televisions to be successful, you need to configure the receiver. Connecting a TV set-top box requires connecting the antenna cable using an HDMI cable to the TV connector. To completely complete the satellite TV setup and connect the receiver, you need to follow these steps:

Insert the SIM card into the slot provided for this purpose.
Turn on the set-top box and wait for the equipment analysis to complete and the 3G signal to initialize.
Authorize the device using methods that will appear on the TV screen, usually this is a call to the call center or sending an SMS, in some cases the service will be carried out automatically.
Create and save a user profile. At this stage, in the “Access Level” section, you can set the age threshold and change the password.
Scan available channels.

TV module

To configure the module, you will need the following steps:

Unplug the TV.
Connect the antenna cable to it through the connector marked SATELLITE.
Install the TV module into the CI port.
Install a smart card in the TV module so that the chip on it points towards the TV image on the sticker.
Turn on the TV.
Go to the mode of viewing satellite TV from MTS, set the necessary parameters.

Settings for satellite TV from MTS

The MTS TV set using the STB Dune HD TV 251-S2 set-top box for watching satellite television does not require additional channel settings, everything will be done automatically. Manual settings will be required when using the Verimatrix CAM module. In this case, the satellite must have the parameters 75.0E ABS 2 MTS TV, the polarization is vertical linear, the position is 75° East, the module type is DVB-S, DVB-S2, QPSK, 8PSK, the speed is equal to 43 or 45 Msymb/ sec, and FEC – 5/6, 2/3.

Manual channel tuning

What settings are needed to watch channels? Manual settings are only needed for the CAM module. To do this, use a list of frequency ranges and transponders.

Features of connecting to MTS satellite TV

The satellite, thanks to which channels from MTS are broadcast, has a wide coverage area. This operator covers 90% of the Russian territory. The main feature of the provider is its focus on the quality of the received signal and image quality, the number of channels fades into the background. For some channels there are several versions of standard time. For example, if you did not have time to watch a movie or program at one time, then on this channel you will be able to see it on this channel, only in a different time zone.

Registration in your personal account for MTS satellite TV

Your personal account on the MTS website allows you to get many privileges. To register, you need to select the “My MTS” button, which is located in the upper right corner of the site, and then decide on the required satellite TV section. To register, you will need to enter your contract number and passport details. Such actions will later make it possible to manage services, view payment history, make settings, view the current tariff plan and change it, pay for the service, find out the remaining traffic, and more.

Each of us wants to enjoy quality television, regardless of where we are. This problem becomes especially acute in the summer season, when many city residents go to their dachas six hundred or even a thousand kilometers from large populated areas. And here everyone decides for themselves how to spend the evenings - being nervous, trying to catch at least one channel or watching their favorite programs in high quality. If you choose the second option, then the MTS satellite dish is ideal for you. There are a large number of reviews about it, so it’s quite easy to find out its pros and cons. Today we will tell you about this device. In addition, we will consider the issues of installing the MTS antenna, which seem very difficult to most buyers.

The main advantages of the package from MTS

There are quite a few satellite dishes on the market today, offering a ton of different packages. In general, they provide the same service, but they often hold various promotions, make discounts and introduce the most modern services that should interest customers. However, clients are usually confused by the variety of companies operating in this market and cannot choose the most suitable option for themselves. Therefore, referring to reviews about the MTS antenna, we have compiled a list of its advantages. As it turned out, it turned out to be quite extensive:

high signal level;
easy connection;
equipment (HD set-top box);
automatic update;
the ability to use all the advantages of interactive television (rewind, pause and similar services);
Internet access;
Availability of additional video materials.

In addition, reviews of the MTS TV antenna indicate that the kit itself is very mobile. Therefore, you can easily take it with you when moving to the country, and at the same time it will not take up much space in your bag or car.

Interestingly, television is divided into packages. You can always purchase the one that suits you most. However, the basic package also contains many channels for every taste: entertainment, educational, children's, and so on.

Types of satellite television

The MTS television antenna (we will give reviews about it in a separate section of the article) offers customers two types of connection:

linear;
interactive.

The number of available services depends on which option you choose. Naturally, this also affects the cost of connection. However, we will talk about this a little later.

Linear television

Judging by the reviews, the MTS antenna can provide a linear connection, which includes standard broadcasting corresponding to regular satellite TV. In this option, the pause or rewind functions are not available. You will only be able to view the channels included in your package.

Most often, those buyers who already have some kind of antenna and are not very demanding agree to this option. Depending on the region, the set of equipment required to connect linear television will cost customers a little more than five thousand rubles.

In reviews of the MTS antenna, there is often information that the company’s clients also purchase an HD set-top box. Of course, its cost does not allow you to make a purchase rashly, but with it you can significantly expand the capabilities of conventional television. For example, you can set up parental controls, pause your favorite show, or connect a portable storage device to the TV.

Interactive television

This connection gives customers quite a wide range of functionality. However, it is necessary to remember one “but”, which Russians often mention in reviews of the MTS TV antenna. Interactive television should only be connected if there is a strong Internet signal in the place where you live. Otherwise, the satellite simply will not work.

This version of satellite television, according to the manufacturer’s promises, will soon allow you to catch radio waves, use social networks and distribute Wi-Fi to all devices in a house or apartment.

The equipment together with the antenna will cost about nine thousand rubles. If you already have an antenna, you can pay one thousand less.

Maintenance cost

It’s nice that you can pay for an MTS antenna for a TV (customer reviews confirm this) in two ways:

monthly;
once a year.

The size of the subscription fee depends on the packages you have connected. For example, the basic one will cost one hundred and forty rubles a month or one thousand two hundred rubles in a one-time payment. Many buyers in their reviews of the MTS satellite dish with the Internet note that the basic package is quite good. It includes one hundred and twenty-nine channels from which you can choose a lot of interesting things.

If this number of channels does not seem enough to you, then you can connect additional packages. For example, a children's package contains seven channels, and you will only have to pay extra for it per month.

List of required equipment

In reviews, buyers often note that they experienced great difficulties in the process of choosing equipment. Many people are starting to look for options second-hand or from intermediaries, but it is best to buy the entire set at the MTS office. In this case, experienced employees will always be able to advise you on the necessary equipment.

Typically, to connect a television, you may only need a set-top box, an antenna and a converter. After this, you can think about how to install the MTS antenna. There are two algorithms for this:

call the master;
self-tuning.

In the first option, be prepared to pay approximately one and a half thousand rubles for the service. Please note that installation costs will be higher in some areas.

If you decide to install it yourself, the instructions will help you. It is quite simple to use, but still this process causes a lot of difficulties. We will talk about the features of installing the MTS antenna in the following sections.

How to set up an MTS antenna yourself: choose a location

Those who decide to do the settings themselves should first choose a location for installation. The main thing here is that there is no interference on the communication line. The instructions must indicate in which direction the antenna should be turned. Also keep in mind that snow, rain and intense rays of the sun should not fall on it (as on a loggia, for example).

If you live in your own home, then choose a place at an altitude of seven to ten meters. This will protect the antenna from dust and dirt, and this will help improve the signal quality.

How to set up an MTS satellite dish: dish assembly

Craftsmen advise installing and securing the brackets first. They must be strictly vertical, otherwise you will not be able to catch the signal and install the antenna. Then you can start assembling, and here you need to be very careful, acting strictly according to the instructions.

The assembly process itself involves attaching the converters to the plate. In this case, the connectors should always be at the bottom; if this rule is observed, the risk of their oxidation is reduced. All contacts must be well insulated; if necessary, they can be coated with sealant.

After all the necessary manipulations have been completed, you can hang the plate on the brackets and begin the final stage of setup.

Setup process: features

The most difficult thing for many buyers is trying to point the dish at a satellite signal. However, there is nothing complicated in this process if you follow the tips given in the instructions.

First of all, determine your geographic coordinates; any mobile device with navigation will help with this. The MTS website indicates the azimuth of the satellite location, with the help of which the inclination angle is determined. Now all you have to do is point the antenna at the broadcast signal and secure it. Many people use an engineering compass for this.

Keep in mind that a good signal cannot be lower than sixty percent. If your result is more modest, then try moving the antenna slightly. The optimal pitch is five millimeters. At the same time, do not stand in front of the antenna, you will interfere with the signal and will not be able to make precise adjustments.

Negative reviews of satellite television

Over the years, MTS antennas have received a large number of reviews. In this article we will present comments from satisfied clients and those who are dissatisfied with the quality of the services provided. Let's start with the latter.

The most common types of dissatisfied customers include:

poor signal quality far from cities;
interference due to rain, snow or wind;
weak Internet completely makes it impossible to enjoy the advantages of interactive television;
difficulties with self-installation and connection;
unsatisfactory call center performance.

Customers also often note that problems with the antenna also arise at the stage of filling out a service request. In many cases, the form on the website is not sent, and a personal visit to the office does not always solve the problem.

Some MTS clients write that the set-top box itself gets very hot during operation, so they are afraid to leave it in the house with their children.

Positive Feedback

There are also quite a lot of satisfied MTS customers. They are happy to describe the advantages of buying an antenna:

a huge number of channels;
the ability to purchase a set of equipment in installments or at promotional discounts;
excellent signal across Western Russia;
compact console;
high image quality;
ease of use;
Wide functionality when connecting interactive television.

Many Russians write that they are happy to use the antenna in different Russian regions. At the same time, they are attracted by the price-quality ratio, which is quite difficult to find from other companies. In addition, the MTS support service works around the clock, which means its operators will always help you in case of unforeseen situations.

Is it worth buying an MTS antenna? It is difficult for us to answer this question. At the moment, it generates a huge number of completely different reviews, which does not allow us to form an objective opinion about the quality of the services provided. Each of our readers has the right to decide for themselves whether MTS satellite television is suitable for them. And we just tried to talk about this device as unbiased as possible.

Cable communications are not available to all residents of Russia, but many have a desire to watch the best television channels in good quality. A way out of this situation may be to connect satellite television, which is available even in the most remote corners of the planet. In Russia, satellite television services are provided by many providers, including MTS. appeared relatively recently, but many have already appreciated its advantages, while the number of new subscribers is increasing daily. If you just purchased the kit, then very soon you will have to figure out how to set up MTS satellite TV. Of course, unless you decide to hire a specialist to do this work.

Of course, if possible, it is better to seek help from an appropriate specialist who will install and configure the equipment. MTS does not provide such a person, so clients are forced to deal with this issue on their own. Of course, there is a fee for such services, and not a small one. If you do not want to pay or there is no suitable technician in your locality, you can set up satellite TV from MTS yourself. This is quite possible, and you do not need special equipment. No one guarantees that you will definitely cope with the task, but it’s worth a try.

What is required to set up MTS satellite TV

Many are convinced that setting up satellite television is an incredibly complex procedure that requires special equipment, so you can’t do it without a specialist. In fact, everything is much simpler. Of course, no one will claim that everything is extremely simple, but nothing is impossible here. Many people are most concerned about the issue regarding the special equipment needed to search for a satellite. Don’t worry, you don’t need to buy any special devices, any smartphone is enough. Of course, before you set up MTS satellite TV, you need to find out what exactly you need and prepare everything in advance. Don't worry, the list won't be long.

To set up MTS satellite television you will need:

The MTS satellite TV set itself;
Working tool for mounting the antenna;
An application installed on your smartphone to find a satellite (for example, SatFinder);
TV or projector.

You don't need any additional devices. Basically, even if you don't have a smartphone, you can still locate the satellite. This can be done through the setup wizard on the MTS website or in the menu of the set-top box.

Important
If you are not confident in your own abilities, do not risk the equipment and contact a specialist.

Setting up MTS satellite TV

Before you set up MTS satellite TV yourself, think about everything again. You must be aware that no one will compensate you for damaged equipment if you damage it during the self-installation process. If you are confident in your abilities and are aware of the possible risks, then you can begin installing the antenna and setting it up. Ideal if you have an assistant. It will be much more convenient if someone monitors the picture quality while adjusting the antenna. So, let's look at how the process of installing and configuring satellite television from MTS goes. By the way, if you prefer visual instructions, then at the end of the article there is a corresponding video.

Important
The MTS satellite dish must be facing south, otherwise you will not be able to receive a signal.

To install the antenna, follow these steps:

Choose a suitable place to install the plate. It must be in the line of sight of the satellite, that is, there should be no high-rise buildings or tall trees around that could interfere with signal reception;
Assemble the satellite dish following the instructions that came with the kit;
Install the bracket in a predetermined location and attach the plate to it (do not tighten all the bolts, otherwise you will not be able to fine-tune the equipment);
Attach the converter, connect the cable to it and stretch it into the apartment, then connect it to the set-top box.

The installation of the satellite dish is complete. Be sure to check that everything is securely fastened. After fine tuning, you need to tighten the remaining bolts so that the antenna does not change position in bad weather. Subscribers often complain that the signal disappears during windy conditions. As a rule, the reason is poor fixation of the satellite dish. So, after installing the antenna, you can begin setting up the equipment. As was said, for an accurate determination you can use special applications for a smartphone or the setup wizard on the MTS website. Our example uses the SatFinder program.

To set up MTS satellite TV, follow these steps:

Download and launch the SatFinder application (the program is free);
Enable geodata transmission on your smartphone to connect to GPS;
Select satellite ABS 2 - 75 E;
The program will show the direction of the antenna, and also calculate the elevation angles and azimuth;
Point the plate in the desired direction;
Turn on the set-top box, then open the menu item Settings - Antenna settings;
A scale will appear that displays the signal strength. If the scale is filled to the maximum, you do not need to do anything. Otherwise, rotate the antenna until the bar is full.

After completing the above steps and achieving maximum signal, you can secure the antenna thoroughly and begin authorizing the equipment. The most convenient way to authorize is by calling the help center. we have already told you. That's all, we hope you were able to install and configure MTS satellite TV without any problems.

Today, MTS offers its subscribers not only mobile communications; now customers can connect and enjoy high-quality broadcasts of many channels. But for high-quality viewing, you will need to set up your home television, and how to do this is described in the article.

What you need to connect

Each person who decides to watch television from MTS will need to use the following equipment to connect:

TV.
A device from MTS that you can buy to choose from: an interactive set-top box that supports broadcasting in HD quality, which has a 3G modem for accessing the Internet, a regular TV set-top box that can broadcast HD channels or a TV module (CAM) . The latest device allows you to use satellite TV without a set-top box. In addition, the module can reproduce broadcasts in HD quality, but such equipment will require a TV that has a DVB-S2 receiver with a CI connector.
Satellite antenna, which is included when purchasing equipment.
The converter is also included in the standard list of equipment.

In addition to the devices described, the following components will be additionally needed:

Cable for connecting the antenna, as well as fasteners. Such components will already be supplied as a complete set from MTS.
Control panel.
HDMI-HDMI cable or Jack 3.5-3RCA cable.

When everything you need is ready, you can start connecting and setting up. This can be done with the help of a specialist from the MTS company, who will go to the site for connection. You can order the service of an adjuster at the time of filling out the application. Another method is to configure the equipment yourself, according to the instructions included in the kit. Below we will describe a detailed method for connecting this or that equipment with your own hands.

Preparatory work

Check installation possibility. To do this, you can use a free mobile application, which is available for download in the application market. It's called "SatFinder", after installation you will be able to see the location of the satellite in relation to the house where the TV will be used. The program allows you to find out the exact direction and also indicates how to correctly install the antenna.
After checking the installation feasibility, you will need to familiarize yourself with the physical installation of the antenna, as well as identify possible interference and obstacles to the signal. If there are tall trees, houses, etc. in the signal path, then it makes sense to place it on the roof, only then it can be rotated in different directions to improve the signal.
Next, the equipment itself is selected for the TV used, in other words, these are set-top boxes or a module.

Additionally, before installation, you will need to check the presence of all the necessary components:

Attachment or module.
Smart card or SIM card.
Antenna.
Antenna mounts (must be included).
Converter.
Coaxial cable.
Connectors.
Installation tool.
Plug for connecting the cable to the TV.
If 2 TVs are connected at the same time, then a divider that operates in the range from 950 to 2150 MHz.

To make installation and setup faster, and the work much more convenient, it is recommended to immediately buy the complete kit, which is offered by the MTS operator. It will contain everything you need for installation.

Antenna installation and configuration

First you need to assemble and install the antenna. The assembly procedure is described in detail in the instructions; it is quite simple to complete the work. It is necessary to tighten all the nuts, but so as not to damage anything, but there is no need to touch the nuts and fastenings for the wall bracket and adjusting the antenna angles. The mount, which is made of a couple of parts, must be assembled separately and not screwed to the antenna. The converter is immediately installed on the antenna, but the cable is turned on later.

Next, using the application described earlier, you need to install and fix the antenna on the wall. Installation is carried out on a flat surface, the bracket itself is applied to it, and the fastening points are outlined with a marker. Next, the marked area is drilled and installation is carried out using dowels. Then, you need to put the antenna on firmly installed brackets and tighten the nuts on the fasteners, after which the mirror angle is set vertically, as much as possible.

When the base is installed, the cable is connected to the converter and the antenna can be configured. To do this, you need to rotate it, tilt and unfold the converter. The procedure will be as follows:

The SatFinder application is launched on the mobile phone.
The ABS 2 – 75 E satellite is selected.
The application will begin to show the direction of the selected satellite and using the camera you will need to show the position and the required angles of rotation and tilt.

Having aligned the antenna, you need to check the signal. The cable must be connected to the set-top box and go to settings using the remote control. Go to the antenna settings section, where the signal level will be shown. If the signal is weak, you need to rotate the antenna in different directions to achieve high-quality communication. As a rule, with the application the quality of communication will be high and no additional settings will be needed. When the signal is at the desired level, the antenna is fixed and all the nuts are tightened.

Setting up MTS equipment

To configure the equipment, you will need to turn on the set-top box after connecting the cable. When using a module, you need to install it into the TV, into the connector intended for it. After which the card is inserted.

The configuration of the interactive set-top box will be as follows:

Initially, a SIM card is inserted.
Next, the set-top box starts and you need to wait for initialization.
After this, you should go through authorization using the methods that will be offered.
After authorization, you need to create and save your profile, and in the access level tab, set a password or age restrictions if necessary.
Then there will be a channel scanning procedure and a menu with the found list will open.

This completes the setup procedure. Setting up a regular TV set-top box with HD broadcasting will look like this:

You need to insert SIM cards into the disabled set-top box and then turn on the set-top box to the network.
The green lamp on the front side should light up; if it doesn’t, then you need to press the red button on the remote control.
Next, the TV turns on and should be switched to AV or HDMI mode.
The initial installation menu will open, where you can set the language, picture size and other settings.
To search for channels, you should select on the remote control, press the search key and then press “OK”.
When the search is complete, the TV will display any channel found and the search menu will close.
You also need to make sure that the device is authorized; if this is not the case, then it is better to do the authorization yourself by following the link https://lk.ug.mts.ru/#/satellite.

Disconnect the TV from the network and plug in the cable from the antenna using the connector labeled SATELLITE.
Next, the module is installed in the port on the TV, a smart card is inserted into it, and only then the TV is connected to the network.
The screen should say that the module was found. To watch programs, you need to select the reception of a satellite DVB-S2 signal, and then make the settings, you can see it in the instructions for the TV and, if necessary, register them manually.
To watch television from MTS, you need to set the TV to receive a DVB-C signal and enter the following parameters: in the search type column, network or fast is indicated, for the signal frequency you need to select 298000KHz, in the modulation line - QAM64, and the symbol rate value will be 6875Kps.

After this, the broadcast should begin. If setting up any type of equipment does not produce results, it is recommended to call the support service on toll-free numbers 88002500890 from a landline or mobile number or 0877 if the call is made only from a mobile phone.

In order to assemble and install a satellite television set at home on your own, without any practical knowledge, you need to follow a certain step-by-step sequence of work.

Let's look at the main points that you should pay special attention to when assembling the plate, wiring diagrams, and also focus on common mistakes that inexperienced installers make.

Installation materials

Let's start with the necessary materials. For assembly you will need:

Without them, if you have several heads, you will end up with a tree like this.

You will need it if you want to simultaneously connect several TVs from one dish.

Converters

To begin with, it’s worth taking a closer look at the converters themselves.

They differ in polarization. There are models:

with linear polarization (vertical and horizontal)

circularly polarized

Circular ones are used to receive Tricolor TV and NTV+ channels from a 36 degree satellite. To receive MTS and Telekart you will need linear polarization of the Ku band.

You can distinguish them by their markings. On the left in the figure is circular, on the right is linear.

They may also have a different number of outputs:

The converter itself consists of three main elements:

irradiator

waveguide

electronic unit

Under the irradiator cover you can see a dielectric plate. Its presence indicates that this is a circular polarization converter.

That is, it can be used to receive Tricolor and NTV Plus channels. To turn such a converter into a linear one, to search for other satellites, just pull out and remove the plate.

By the way, loss or deterioration of the signal can sometimes be associated with damage to this plate. Due to temperature changes outside, it gradually collapses and crumbles.

Special converters for multiswitches have 4 outputs.

However, they are not all equal. One with vertical, the other with horizontal polarization. Plus two subranges – upper and lower. This is important when connecting cables via a multiswitch.

Multiswitch connection diagrams

The multiswitch itself must be selected depending on the number of cables and TVs in your home. The wiring diagrams for the most popular satellites are as follows:

If you also have a regular television antenna, then the multiswitch must have a TerrTV input.

Connection diagram for the ABS-2A satellite via a multiswitch to receive a package of channels from MTS:

Keep in mind that when using a multiswitch, Daisik=Diseqc is no longer needed.

Satellite dish assembly

The assembly tool usually requires a pair of open-end wrenches for 10 and 13, plus a Phillips screwdriver. To mount it to the wall you will need a hammer drill and anchor bolts.

When you have decided on the package, first of all you need to correctly assemble the plate itself. There are several nuances here.

For example, when assembling the traverse, pay attention that the transverse bar, which is attached to the mirror of the plate itself, should be placed on top of it.

If you screw it on the other side, and this is physically possible, then:

first, you will have poor hole alignment

secondly, the opposite end of the traverse, where the heads cling, will go out of focus

As a result, it will initially be difficult to catch at least some signal. In addition, the mount that goes to the bracket, when setting up satellites above the horizon (relative to your geographic residence), must cling with the adjustable part down.

And for satellites located below the horizon - on the contrary, the adjustable part is upward.

Since in this case, you will no longer need to raise, but lower the mirror.

How to collect a multifeed

Assembling a multifeed also involves some special features. The collapsible kit initially comes with two unequal “ears”. One is more, the other is less.

The small one is put on a tube assembled with plastic.

The large one is attached to the central crossbeam. In this case, both ears can be positioned relative to each other in two different ways.

At the same level or in different planes. Most installers place them exactly in one plane.

Although if you do the opposite, this will make it easier to perform the very initial setup of the satellite dish and will save time when searching for additional side satellites.

The assembled heads will be at different levels, one higher, the other lower.

Actually, the satellites themselves fly across the horizon.

But this is of course true if your converters pick up three different satellites. When two heads are picking up the same satellite, for example Eutelsat 36E, but with different software packages, then place them in the same plane.

But mount the third head as described above. The spacing between the converters also depends on the diameter of the mirror. The smaller its size, the closer the heads will be located relative to each other.

After the bar is screwed on, try, at least by eye, to position the head so that the central axis of the plastic (where the two halves of the casting meet), and this very attachment to the traverse, are at an angle of 90 degrees. Further, everything will be regulated relative to this initial position.

The order in which multifeeds are interleaved also matters. The first and closest to the dish should be the multifeed whose satellite position is closer to your place of residence.

For example, if you live beyond 40 degrees, then Eutelsat 36.0E should appear on your dish first, then Hotbird 13E, and lastly Astra 5.0E. The same is true for other satellites.

After fixing the dish to the wall or roof, lay coaxial cables from this place to the tuner or switch.

Label each end with which head it comes from.

If you have a Dysec, there will be one output cable.

F connector connection

To connect coaxial cables, you need to strip them and put F-connectors on them. There are two ways to do this.

Method 1 – cut off only the outer sheath of the cable with a knife at a distance of 20-25mm. The screen must not be damaged.

Carefully bend all the wires onto the shell.

Now you need to remove the insulation from the central core. It should protrude from the screen by a maximum of 2mm.

After this, screw on the F connector.

Shorten the excess stock of the central core, leaving no more than 5mm from the plane of the connector.

Method 2 is easier. Take the utility knife again. Step back approximately 1cm from the edge of the cable and cut off all the insulation. Including external and internal, up to the central core.

Then, retreating 3mm, cut off only the outer braid.

Make sure that no lint or wires get between the braid and the central core.

There is no need to remove any more insulation or bend anything. Just insert and screw on the f connector from above.

Next, you lay out cables throughout the apartment in all the rooms where you have TVs. You sign them all too.

At the same time, it is much safer to run the cable directly into the device rather than connect it through a satellite TV outlet. This may be associated with either a loss of quality or a complete loss of signal.

The wiring diagram when using a multiswitch may look like this:

Diseqc connection

If you only have a dashcam, connecting and configuring satellites is carried out in the following sequence.

Remember that any self-respecting store of satellite equipment and similar systems always sells tuners already programmed for certain channels and satellites. Otherwise, competitors will simply drive him out of the market.

At the same time, when purchasing, be sure to ask the seller to write you the Diseqc ports of the switch, since they were set by him during the settings. It is through these ports that you will have to make all cable connections.

When installing, you first connect the cables to the heads, and then run them to the Dysik. Just on it, it is advisable to connect everything initially with the “factory” tuner settings.

If you have any satellite in the receiver configured to the first port, then accordingly it should not go to port No. 1. If it is on the second one, then port No. 2 is also used in the switch, etc.

All input ports are always signed. The central single connector is the output to the tuner itself.

Search for satellite and channels

Setting up and searching for a satellite can be done without fancy devices using the receiver itself.

True, you will have to drag the tuner itself + some small TV onto the roof.

Unless, of course, you install a motorcycle suspension.

This setup can also be done by two people. One person on the roof moves a plate, another uses a cell phone to control the house's TV signal.

If you are not satisfied with either one or the second option, you can buy a cheap portable device from the Chinese for setting up and analyzing the satellite signal - or here.

Then setting up will not be difficult at all. By the way, it will be useful in the future if after a strong wind your signal deteriorates or you want to add a satellite over time, or maybe even change the heads. Configure satellites with MTS and Tricolor, instead of Amos, Astra, etc.

Start setting from the central head. Initially, place the plate with a slight rise towards the horizon. To find your bearings, look at your closest neighbors.

Nowadays, you will clearly no longer be a pioneer, and finding a couple of tuned cymbals will not be difficult. Sometimes there are so many of them that they interfere with each other.

As a last resort, you can use programs on smartphones - Satellite Director or SatFinder.

You install the program, launch it and start turning your smartphone in different directions in search of the desired satellite. The coordinates of most of them are already entered into the program and there is no need to search for anything.

An icon marked with a circle or cross will indicate the correct direction for the satellite dish. Refer to it.

Turn on the tuner, select a satellite from the central converter and look for at least some signal from this head. The search is performed by raising, lowering and rotating the antenna itself.

The signal quality is indicated as a percentage scale and is located at the bottom of the screen. You want to achieve the highest possible value.

To do this, very, very slowly begin to turn the plate in different directions. The mirror itself cannot be covered.

If there is no signal, or it is of very poor quality, the dish drops slightly. Then the process of turning around is repeated. As soon as a good quality signal is found in height, the dish is preliminarily fixed vertically.

After which, you can again turn it left and right to find the highest possible quality. There will never be 100%, just look for the highest possible figure - 68-75%, etc.

Having found the best position, finally clamp the rotating mechanism to the right and left. Just don’t fully tighten one bolt at a time, otherwise the plate will move to the side a couple of degrees. Tighten the nuts evenly, like on car wheels or an engine head.

When the corners are all set, it is necessary to again adjust the entire structure in height. Having loosened the fasteners, you begin to raise or lower it vertically, all the time monitoring the signal.

Remember that the maximum is always found using the downward method.

Why is this needed and what does it give? During long-term operation under the weight of snow, wind, and rain, the dish will still go down a little, worsening the signal.

You need to put it on a stretch, as it were. This will preserve the signal quality for a long time.

Keep in mind that the plate must initially be fixed level to the wall or roof.

If this is not observed, then having found the horizontal maximum of the signal, you will begin to look for the vertical maximum. And in the process of this, the horizontal position will go away. You will have to adjust the horizontal-vertical several times.

Next, proceed to the next stage of setup - scrolling around its axis of the central converter clockwise or counterclockwise. Here you can also achieve a signal improvement of several percent.

This way you have adjusted the plate itself and the central head. Let's move on to setting up side converters from other satellites.

Switch the tuner to the next satellite and call up its information line. Thanks to the multifeed, the converter of this satellite can also be rotated up and down, brought closer or further away from the dish.

Just like with the middle head, first look for the maximum on the vertical, and then move the side converter closer or farther towards the central one. At the end of the settings, rotate it around the axis.

When setting up satellites from the side converters, pay special attention to where you stand relative to the dish. On the side heads, the signal from the satellite arrives at the center of the mirror and, reflected like in a billiard, hits the converter.

So, in order not to block this signal with your body, you should be located on the nearest side of the tuning head, and not on the opposite side.

After searching and setting up a satellite from all three converters, the process can be considered complete. Hide and seal the cable from rain and precipitation, and securely secure the satellite cables with clamps to prevent them from being blown around by the wind.

Installation and connection errors

1 Incorrect assembly of the traverse

At the very initial stage, do not make a mistake with fastening the traverse for placing the converters. It should be installed under the bracket, not on top of it.

Otherwise, there will be big problems finding a signal even on the central head. Incorrect focusing will be to blame.

2 Using feed-through sockets

Pass-through sockets are the first enemy of satellite television. From such devices there may be no signal at all.

Therefore, only the final ones can be used. They are often paired with television ones.

3 Splitters

They can only be used for analog television. Satellite TV should not have any splitters. The fact is that channels are usually broadcast in two polarizations.

And the splitter is not able to simultaneously pass them through itself. As a result, some channels will simply be missing on some TV.

4 Large number of connections

Any connection means a loss of signal quality, including at seemingly convenient sockets.

Particularly ensure that there are no connections in places of high humidity - attics. In bad weather, the signal will disappear altogether because of this.

5 Cheap cable

Do not buy a Chinese cable of dubious manufacture. Almost half of the level of the signal that reaches the receiver from the dish can depend on the quality of the cable.

6 Incorrect insulation Diseqc

Never wrap dysec in a plastic bag. Even if this saves you from direct raindrops, condensation will still form inside over time.

And it is this that will cause the failure of the switch, which necessarily requires ventilation and communication with air. The simplest and cheapest option is an empty plastic bottle, which doesn’t really help either.

Therefore, it is best to place a moisture-proof box next to the plate and install the switch in it.

7 Isolation of F-connectors

Also, do not wrap electrical tape around the F connectors. Such insulation does not help against rust, and only worsens the situation, since sooner or later moisture will still penetrate under the insulating tape.

And instead of gradually evaporating or rolling off the surface of the connector, it lingers on it and accelerates the corrosion process several times. Also, do not forget to put the insulating cap on the free Diseqc port.