How to disable auto-update in windows 7 ultimate. Properly disabling automatic Windows updates
As you know, the seventh version of Windows OS automatically downloads and installs updates. The operating system communicates with the Microsoft host whenever the computer connects to the Internet. Theoretically, this behavior should have a beneficial effect on the operation of the PC, because the installed packages are developed specifically to eliminate found vulnerabilities and optimize the operation of programs. However, in practice, the best option is to disable automation. How to cancel Windows 7 updates and why to do it will be discussed in the article.
The main reasons for disabling the built-in update utility
- The main problem caused by updates is sudden crashes and critical errors after completing the installation procedure.
- The operating system stores all downloaded packages. Over time, there are a lot of them, and this reduces free space on your hard drive. When the value of this parameter reaches a critically low level, the OS will simply refuse to boot.
- When the Windows 7 update program downloads the files it needs, surfing the Internet becomes uncomfortable. This problem occurs especially often among users connected to a “narrow channel”. If the provider limits the amount of traffic per unit of time, automatic updates can hit your pocket.
- If the patch installation process is running, the computer cannot be turned off until all operations are completed.
- If your computer is using pirated version Windows, the scenario of limiting the functionality of the computer after installing the next package is real.
using administration tools
The first way to disable updates involves completely refusing them. To do this, you will need to disable the built-in Windows service.
- Launch Control Panel.
- Expand the "Administration" section.
- Several items will be displayed in the window. Click on "System and Security".
- Find “Administration” among the icons that appear on the screen.
- Double-click the "Services" shortcut.
- Scroll to the very end of the list.
- Select Update Center.
- In the window that opens, opposite “Startup type” in the drop-down list, set “Disable”.
- Here, click on the “Stop” button.
- Now all you have to do is click on “Apply”.
After this operation, the OS will no longer contact the Microsoft site to check and download new patches. To re-enable the service, follow the same steps, but set the Startup Type switch to Automatic and restart your computer.
Disabling automatic mode only
How to cancel Windows 7 updates that are downloaded automatically, but leave the option to install manually?
- Launch Control Panel.
- In the window that appears, click on the “Update Center” item.
- Click on the "Center Setting" button. It is located on the left side of the interface.
- Set the switch to the “Do not check” position.
- Click "OK" at the bottom right of the window to confirm the changes.
Removing patches: preparation
If, due to the installation of a particular patch, the system begins to work unstable, it is recommended to remove the update package for Windows 7. To do this, first boot the OS into safe mode. To do this, hold down the F8 key until the screen disappears. information messages BIOS. If pressing F8 will bring up a menu with a list of English, select Safe Mode, in Russian, respectively, “Safe Mode”.
When this approach doesn't work, try this:
- Create an empty shortcut on your desktop.
- In the “Object location” column, copy cmd.
- Click on “Next” several times.
- Now expand context menu shortcut and select run as administrator.
- Will open command line, you should enter bcdedit /set (default) bootmenupolicy legacy.
- All you have to do is press “ENTER”.
After this, safe mode will definitely turn on.
Removing patches using standard means
It is important that before performing following instructions examination Windows updates 7 has been disabled, otherwise the patches will be installed again automatically.
- After turning on the PC, go to the “Control Panel”.
- Click on the “Programs” line with the left mouse button.
- Find the View Updates link in the table on the left.
- A list of all previously installed patches will appear on the display.
- To remove any of them, click on the name the required package right click mouse, and select “Delete” in the menu that opens.
Conclusion
Any tool is good if used skillfully. Built in operating system utilities were created to ensure computer security and user comfort. Before canceling Windows 7 updates, weigh the pros and cons. Best choice Only the automatic operating mode will be disabled. At the same time, you should regularly check for patches and be sure to install those that are designed to close holes in your computer’s security. Without them, no modern antivirus or antispyware programs will be able to protect the OS.
Windows updates are a useful thing, but very annoying. Many users are familiar with the problem when they urgently need to turn off the computer, but then an update begins to install. This can take a couple of minutes or several hours; also, if the update is enabled in Windows 7, it can automatically switch to version 10. Therefore, some users consider it rational to simply disable updates. Moreover, this is not the only reason why it is worth doing.
Reasons for shutdown.
- Various add-ons are designed to improve this OS and solve some minor problems. But it also happened when, due to errors that accidentally arose during installation, the computer stopped working.
- Updates appear quite often. Over time, there will be such a number of them that it will significantly affect the computer’s memory.
- Internet connection is required to download add-ons. Due to large volumes, its speed is significantly reduced. And if it is also limited, you will have to pay a decent amount.
Disabling updates in Windows 7
Option one.
To stop receiving updates, you should follow the path indicated in the screenshot.
Next, you will need a service called Update Center. In the window that opens, specify the startup type “Disabled”, and then click the “Stop” button. Next, feel free to save your changes.
This way you will completely disable all updates. If you only need to get rid of automatic additions, then go to the second option.
Option two.
The screenshot shows the path you should follow. Select what is highlighted in red, namely “Settings options”.
In the new window, select the “Do not check for availability...” option. The checkboxes below also need to be removed. Save your changes.
Don't worry, you can manually install all the add-ons if necessary.
Tip: if you get tired of the checkboxes at the bottom of the screen, you can remove them too. Click on it and open the Help Center. Next, just click on the “Don’t receive messages...” item. After saving, annoying flags will not bother you.
Disabling updates in Windows 8
The above method works great for this OS version. But despite this, there is another method of disconnecting.
Open side menu and select the item called "Options".
Click on the button located at the very bottom.
Then follow the path shown in the screenshots.
In the window that opens, you will see the same parameters as in the previous version. Make the same settings and then save the changes.
Disabling updates in Windows 10
But if you have Pro or Enterprise OS. To do this you will need a local editor group policy, which can be called using the Run utility by specifying gpedit.msc there.
Find the automatic addition setting, which is located in the update center (in Computer Configuration). Double click on it.
Disable everything in the settings and save.
True, that's not all. In order for the changes to start working, you need to manually find the add-ons right away. It is not necessary to install them; after these steps, the computer will definitely not check for updates.
Limited Internet.
If you set your Wi-Fi as metered connection, then you can easily disable downloading any updates. Just in the “Network and Internet” parameters specify this type networks. After this, no add-ons will be installed.
This way, you can disable annoying updates in any OS you like. But if necessary, you have the opportunity to find new ones and install them.
Windows updates are sometimes of dubious value. In the case of the tenth version, all updates except the first after installing the system are very specific and controversial. Moreover, they always start unexpectedly, without notifying the user, and their sudden use causes a long reboot of the computer. However, you can interrupt updates at absolutely any stage.
How to quickly abort an update
If you want to quickly abort a Windows 10 update, depending on its stage, the first thing you need to do is the following:
- if the update has just started downloading, disconnect from the Internet;
- if the update has downloaded and the system asks to restart to apply it, do not do this under any circumstances;
- If installation or application of updates begins when you turn on/off/restart the system, turn off the computer by holding down the power button on the case.
Regardless of the option you are faced with, everything further actions will look almost the same. Now you need to start canceling the update that has started. For last option problems, start the system in safe mode.
Starting the system in safe mode
Starting the system in safe mode is guaranteed to help start the computer without installing downloaded updates.
If you skipped downloading updates and turned off your computer, canceling them will have some difficulties: every time you try to log in, an attempt will be made to apply the updates. This problem has been fixed in later versions of Windows 10, but it's best to start your computer in Safe Mode just in case.
How to cancel an update
The described method is suitable for quickly interrupting an ongoing update. Now the update needs to be canceled so that you can safely turn on the Internet or restart your computer.
There are several ways to cancel an update that has started. For example, enable a metered connection or Airplane mode. However, such methods will only interrupt the downloading of new packages and will not prevent the installation of already downloaded ones. The only way to guarantee that an update has started is through the command line.
![](https://i2.wp.com/dadaviz.ru/wp-content/uploads/2017/09/1-15-1120x680.jpg)
To resume the update, you need to repeat the above commands, replacing stop with start.
How to permanently disable downloading updates
The method mentioned in canceling the update also includes prohibiting further system updates. But there are others that will be more convenient and reliable in the long term.
Via Group Policy Editor
This method is not suitable for home version Windows and some unlicensed versions of the system, but by using it you will retain the ability to manually run system updates.
![](https://i2.wp.com/dadaviz.ru/wp-content/uploads/2017/09/1-19-1120x680.jpg)
Through services
This method is available on all versions of Windows, but it completely prohibits system updates: you will not be able to download updates even by running the scan manually (the scan will run, but will not be able to find anything).
![](https://i2.wp.com/dadaviz.ru/wp-content/uploads/2017/09/1-18-1120x680.jpg)
Via Registry Editor
This method can be considered the most correct, but also the least safe: it makes changes directly to the system configuration, and you can cancel it only after making similar actions again. If you intend to use this method, save the path to the parameter you are changing somewhere so that you can roll back the changes.
![](https://i2.wp.com/dadaviz.ru/wp-content/uploads/2017/09/1-17-1120x680.jpg)
Via Windows Update
Blocking updates through Windows Update is official, but it is also the least reliable. In this way, you mark your own Internet connection as metered: updates are not downloaded through such connections in order to save traffic.
Default in Windows 10 system updates and new driver versions are downloaded and installed automatically. However, auto-update can be deactivated using standard methods or using third party programs.
Should I disable automatic updates?
Updates correct errors made in previous versions of the system. If you do not install them, some problems found by the developers will not be solved.
However, automatic update has its downsides:
- updates can start downloading at any time, which will lead to increased load on the Internet;
- downloading large updates eats up part of the traffic and money balance if you use metered Internet;
- updates are installed in background, as well as during the next shutdown and subsequent startup of the device. If you urgently need a computer at this moment, you will have to wait for the update installation to complete.
Therefore, it is recommended to switch to manually selecting updates or abandon them completely. When choosing the first option, you will be able to independently select which updates to download and which of those already downloaded to install.
Deactivating system auto-update
There are several ways to disable auto-update of the system. The simplest is by disabling the service. If it does not work correctly, updates will still continue to be downloaded and installed independently, then additional methods are presented below.
Through termination of service
Video: disabling auto-update through service shutdown
Through the "Local Group Policy Editor"
This method can only be used by users of Windows 10 Professional and higher, because only these packages contain the Local Group Policy Editor.
- Open the Run window by pressing the combination Win keys+ R, and enter the command “gpedit.msc”.
Run the command "gpedit.msc"
- Follow the path: “Computer Configuration” - “Administrative Templates” - “ Windows components" - "Windows Update".
Go to the Windows Update folder
- In the Windows Update folder, find the line “Set up automatic updates” and double-click on it.
Double-click on the line “Setting automatic updates”
- Set the option to Disabled, accept the changes, and close all windows.
Set the Automatic Update Settings item to Disabled
- Execute manual search updates via Update Center. This action is necessary so that in the future automatic check and the installation was not carried out by the system.
Execute manual check updates for Windows 10
Video: deactivating auto-updates through the “Local Group Policy Editor”
Through editing the registry
This method is suitable for everyone Windows versions, except for the “Home” assembly:
![](https://i0.wp.com/dadaviz.ru/wp-content/uploads/2017/08/otkrytie-redaktora-reestra.png)
By enabling metered internet mode
This method works in all versions of Windows 10, but disabling automatic updates using it will result in some important and small updates will still be downloaded automatically.
![](https://i0.wp.com/dadaviz.ru/wp-content/uploads/2017/08/zapusk-parametrov-kompyutera-1.png)
Through a third party program
If standard methods, described above did not help solve your problem, then you can use one of the third-party programs designed to turn off auto-update. For example, Win Updates Disabler. You can find it on the website of the developer of this program portable version, which does not require installation. After launching Win Updates Disabler, check the “Disable Windows Updates” option and click on the “Apply Now” button.
![](https://i2.wp.com/dadaviz.ru/wp-content/uploads/2017/08/programma-win-updates-disabler.png)
After deactivating auto updates, restart your computer.
Deactivating automatic computer reboot
The device can reboot itself during your absence. This is necessary to install already downloaded updates. You can manually set a time when a reboot is possible, for example, by setting it to night, or completely prohibit the device from restarting without your knowledge.
Setting time frames
- In Computer Settings, open the Update & Security tab.
Open Update & Security in System Settings
- In the “Windows Update” subsection, click on “Change activity period”.
In the “Windows Update” subsection, click on the “Change activity period” button
- Set two values: the start and end of the period when you are most likely to use the computer. The period should last no more than twelve hours. Until this time has expired, the computer will not be able to reboot, as it will assume that it may be needed at any time.
Specify or change the time your computer is active
- Go back a step and click on the “Restart Options” button.
Click on the “Restart Options” button in the “Windows Update” subsection
- In this tab, you can specify or change the installation time of already downloaded updates.
In Restart Options you can specify when to restart
Partial ban
This method is only suitable for Windows users 10 “Professional” and higher, since only in these versions there is a “Local Group Policy Editor”.
After changing the values in the Local Group Policy Editor, the computer will not be able to restart if there is a user logged on. If there are no authorized users, an automatic reboot will still occur.
![](https://i2.wp.com/dadaviz.ru/wp-content/uploads/2017/08/izmenenie-parametrov-perezapuska-cherez-redaktor-lokalnoy-gruppovoy-politiki.png)
Video: Disabling automatic reboot through the Local Group Policy Editor
Partial ban for all versions of the system
This method is suitable for all versions of Windows, including the Home version. After changing the values, the device will not be able to restart on its own if any user is logged in to their account. If no one is logged in, a restart will be made.
![](https://i2.wp.com/dadaviz.ru/wp-content/uploads/2017/08/perehod-po-redaktoru-reestra-k-papke-au.png)
Video: disabling automatic reboot through Registry Editor
Complete ban via Task Scheduler
Using this method, you can completely disable computer rebooting: even if no user is logged in, the reboot will not occur.
![](https://i0.wp.com/dadaviz.ru/wp-content/uploads/2017/08/perehod-k-planirovshchiku-zadach.png)
Turn off automatic updates for Windows Store apps
By default, applications installed from official program"Store", also called Windows Store, are updated to latest version automatically. This can be inconvenient, since updating creates extra load to the Internet, and traffic, if the Internet is limited, is eaten up. Therefore, it is better to deactivate automatic updates:
![](https://i0.wp.com/dadaviz.ru/wp-content/uploads/2017/08/otkrytie-magazina.png)
Disabling automatic driver updates
Drivers are installed automatically when you connect each new device. Over time, new driver versions may become available; by default, they will be obtained automatically. To avoid this, you can disable automatic updates for a specific device or for all at once.
For a specific device
![](https://i1.wp.com/dadaviz.ru/wp-content/uploads/2017/08/zapusk-paneli-upravleniya-2.png)
For all devices at once
There are several ways to disable driver auto-update for all devices at once. The most universal of them, suitable for all versions of Windows, is through the “Registry Editor”.
![](https://i1.wp.com/dadaviz.ru/wp-content/uploads/2017/08/perehod-k-papke-driversearching.png)
You can also use third party program from Microsoft - Show or Hide Updates. It scans the system and displays a list of drivers that, when updated, can harm the computer. By selecting necessary elements list, you can prevent the installation of updates for certain drivers.
![](https://i1.wp.com/dadaviz.ru/wp-content/uploads/2017/08/programma-show-or-hide-updates.png)
Video: three ways to disable automatic driver installation
Disabling distribution of updates
By default, Windows 10 has a feature enabled that allows computers to receive updates not only from Microsoft servers, but also from other computers that have already downloaded them.
Windows 10 has a function for distributing updates, which is necessary to relieve Microsoft servers. Once your device has received any update, it starts distributing it to others. But this system has a minus - your Internet traffic is wasted only if it is not unlimited, and it creates a load on the speed of your network, since part of it, although small, is given for distribution.
There are two ways to disable the distribution of updates. The first is to indicate that your connection is metered. How to do this has already been described in the subsection “By enabling the metered Internet mode.” The second way is to disable the function itself directly:
![](https://i0.wp.com/dadaviz.ru/wp-content/uploads/2017/08/perehod-k-dopolnitelnym-parametram-centra-obnovleniy-windows-10.png)
Disable system update notifications
If you have automatic system updates turned off, then over time you will begin to receive notifications that the check for updates has not been done for such a long time or that certain updates have not been installed. You can simply ignore these messages, nothing will happen. But if you can’t stand them, you can deactivate receiving notifications:
![](https://i0.wp.com/dadaviz.ru/wp-content/uploads/2017/08/perehod-k-vkladke.png)
System, application and driver updates can put a strain on the Internet and cause loss of traffic. But it is not recommended to leave your devices and computer without updates, as they fix problems discovered by developers in previous versions of the system. Best option- disable automatic installation updates and control this process manually.
Starting with version XP, Microsoft developers introduced into the operating system special service updates, which is designed to solve problems of vulnerability, getting rid of all kinds of bugs and shortcomings. At the same time, many users wonder how to disable updatesWindows 7 . We will describe the algorithm for such a procedure, as well as the reasons why people get rid of such useful service, which by definition should improve the performance of the OS.
According to the developers, such measures have a positive effect on the performance and performance of the operating system as a whole. Thanks to user feedback and testing, they identify mistakes and can eliminate them in a timely manner. This service will also help solve such problems as:
- improving the operation of other services, as well as introducing new ones, within the same OS version;
- installation of patches aimed at improving security;
- replacement of certain system files, which are responsible for the performance peripheral devices connected to the computer.
Why users disable Windows 7 updates
Many experts and people say that why improve something if the operating system already works quickly and stably? In addition, certain packages can cause more harm than good. This can sometimes be indicated by installing the latest version of drivers on component devices that are unstable in operation and the user has to roll back to previous versions so that the equipment begins to function normally - this can also happen with the installation of OS updates. Among other things, it is also worth highlighting several more factors that directly indicate positive points disable this function:
- if the user is using a non-licensed operating system, then when installing some updates, this fact may come up, which will lead to the disabling of certain functionality, and in the case of disabling updates, this actually cannot happen;
- "raw" update packages can lead to critical errors, after which only restoring or reinstalling the operating system will help solve the problem of OS performance;
- all downloaded packages take up a fairly large amount of physical space, and if system partition quite small - this will lead to a lack of space, which will have a very negative impact on the performance of the computer as a whole;
- some updates take a long time to install, and this happens when you reboot or turn off the equipment (a corresponding message appears on the screen that under no circumstances should you turn off the power until the updates are being processed), which also causes a lot of trouble if necessary turn off your laptop or computer immediately;
- For people who have a limited Internet connection, this service will lead to additional costs, because everything necessary files downloaded directly from global network;
- If the connection speed is low, when downloading updates, opening sites will take long time and in fact, visiting one or another page will take a painfully long time.
If any of the above reasons may occur, it is recommended to disable this service. This can be done either partially (it will not work only in automatic mode, while the user, at his own discretion, can do this procedure at a time convenient for him) or completely, prohibiting updating even if the person decides to do so someday upgrade the OS. Let's consider each of these methods separately.
Completely blocking installation of Windows 7 updates
Sequence of actions:
![](https://i2.wp.com/grozza.ru/wp-content/uploads/2018/02/kak-otklyuchit-obnovleniya-windows-71.jpg)
As a result, updates will not be installed, either independently or at the user’s request. In order to resume work, you must perform the same steps and enable this service.
Disabling automatic OS updates
Some upgrades are really useful. If desired, you can install them yourself, while other updates can be excluded and not installed. To activate this mode:
![](https://i2.wp.com/grozza.ru/wp-content/uploads/2018/02/kak-otklyuchit-obnovleniya-windows-76.jpg)
After that automatic mode will be disabled, the user will be able to update himself if he performs the above operations up to point 2, and then clicks on the “Check for updates” button.