Set up mms on tele2 android manually. Reasons for not sending MMS from Android to Tele2

Almost all mobile phone owners sooner or later faced the need to send a multimedia message. Messages of this kind may contain photo, video or audio files. Information is exchanged using mms messages. The size of the file that is transferred is limited, but large attachments are compressed before they are sent. In addition, MMS must also be configured in the phone of the subscriber receiving the message.

MMS on tele2: automatic settings

The most convenient and easiest way to set up work with multimedia messages in a mobile gadget automatic receipt from the tele2 data operator for sending and receiving MMS messages. Most often, after installing a SIM card in your phone, these parameters come to your mobile gadget without extra effort. All that is required of you is their subsequent activation. If the data was not sent automatically or you previously refused the settings received, and now want to use mms messages, you must send a request to receive the necessary parameters. You can:

  • Make a call mobile operator tele2 by dialing 679 and the call button.
  • Go to the tele2 website Personal Area(login.tele2.ru) and find out the necessary information.

You save the received data in your gadget. In some cases, updating the information requires a device reboot.

MMS on tele2: manual setup

You can also set the required operating parameters manually. For this purpose, go to “Connection Settings” of your gadget and enter the information in the fields provided:

  • In the Name of your profile column, enter Tele2 MMS. If you wish, you can use another name that you like and understand.
  • Next comes the mms server address – mmsс.tele2.ru, which is the loading page.
  • In the proxy block, set the value to “active”.
  • Set the IP address to the sequence 193.12.40.65.
  • mmsport number (gateway port) 8 0 8 0 – for gadget models with WAP2.0 support. If you own an earlier device that supports WAP1.x, enter 9 2 0 1.
  • Specify the communication channel – GPRS.
  • Then enter the coordinates for the APN point – mms.tele2.ru. Do not confuse this address with the download page data.
  • Leave the fields indicating your login and access code blank.

After specifying all the parameters, send an MMS message of any content to an arbitrary subscriber (including yourself). This is how you will identify the number in the tele2 network as a user mms services. Otherwise, you will view all received multimedia messages in the MMS Gallery. Using this link, MMS messages can also be viewed by those users whose mobile gadgets do not support mms function.


MMS on tele2: Android-based gadgets

If you need to edit data on Android devices, manual mode you will need to go to the network settings, where you will find the section for managing the coordinates of access points. In it you write the following:

  • In the column URL address MMS center – mmsc.tele2.ru.
  • Enter the characters mms in the access point type information line.
  • The APN address is mms.tele2.ru.
  • The IP address is the combination 193.12.40.65.
  • Enter 250 in the MCC line.
  • In the MNC column – 20.

The lines indicating your name and access code are left blank. Columns not listed above do not require filling out or changing the available information. After setting the operating parameters mobile device should be rebooted.


MMS on tele2: iPhone devices

When manually setting up work with multimedia messages in iPhone devices you should visit the network information transfer block. This is where you create the APN point for mms files. Specify the parameters:

  • APN point – mms.tele2.ru.
  • In the MMCS column, indicate mmsc.tele2.ru.
  • The MMS proxy address is 193.12.40.65:8080.

Other columns and lines remain unchanged without filling in the changes. Save the coordinates and reboot the gadget. Next, in the “Your number” column, enter own number phone.


MMS messages allow you to directly mobile phone send pictures and other multimedia files, which is not possible with SMS. Of course, against the background of the widespread use of smartphones, this function is becoming less and less relevant, but nevertheless it is still in demand among users regular phones. In this article we will tell you how to connect MMS to Tele2. You may also be interested in articles and.

Connecting MMS on Tele2

In fact, the Internet and MMS are connected to every Tele2 subscriber free of charge by default, so no special actions are required. But if for some reason this function was disabled for you, you can set up reception and sending MMS on one's own.

The easiest way to order automatic settings for your phone is by calling the toll-free number 679. In response, you will receive an SMS with settings and instructions. The same message can be requested through your personal account.

You can set the settings on your phone manually. MMS server address is mmsс.tele2.ru. The proxy server must be enabled. IP address - 193.12.40.65. For modern phones with WAP2 support you should specify port 8080, for older ones with WAP1 - port 9201. Desired channel(connection type) - GPRS. The APN access point address is mms.tele2.ru. You do not need to enter a username or password.

Having set these settings, send a test MMS to any address to register your number to use this service. You can even send a message to your own phone.

Let's look at how to order MMS settings on Tele2 and how to register them manually if your phone model is not included in the automated service database. The MMS service allows you to send not only text messages, and supplement them with attachments in the form of video files, photos, melodies. You must first load the appropriate settings into your phone in order to transfer multimedia content without problems.

Please note that not every subscriber will be able to receive MMS. Some phones cannot display this type of message. In this case, the recipient will receive only a text part with a link to the operator’s gallery and a code by which he can view the content from another device.

Automatic setup

How to set up MMS on Tele2 - we’ll tell you about several ways to do this, spending a couple of minutes of your time.

  1. Automated retrieval of the necessary data for sending MMS- most easy way configure your mobile device. Operators usually write a request for MMS parameters to SIM cards. When you insert the SIM card into new phone, a request is sent to the server, after a few minutes the configuration data arrives. All you have to do is confirm them, and the service will be activated.

2. If there was a failure during the first process: the message did not arrive or you accidentally canceled it, nothing bad happened. You can still get Tele2 mms settings in an automated mode.

Dial toll free number reference: 679 .

If the system recognizes your phone model, you will be notified that your application has been accepted. In a couple of minutes you will receive system message with parameters for MMS and Internet, confirm their installation. To finish, reboot your device. How to order Tele2 Internet settings for a smartphone is explained in the adjacent instructions.

How to manually enter MMS Tele2 settings

If automated service does not find your model in the database or with the received settings MMC still does not work, configure the parameters manually. This is easy to do - carefully following our step by step instructions, enter required lines to certain fields.

Third method: open the phone menu, find the section for setting MMS messaging parameters. Enter manual settings MMS Tele2 in the window that appears:

Leave the subscriber name and password fields blank. Save the entered information and return back to the menu. Set the connection profile you created by selecting it by name. Reboot your phone and be sure to send 1 test MMS (can be to your number) to register your phone in the service. If an error message appears, carefully check the entered data. If the MMS is successfully sent to the recipient, the service is configured correctly. If you want to get acquainted with the favorable Tele2 tariffs for the Internet, you need to read the article at the link; the review has everything you need to make a choice.

Through “Personal Account” - the fourth method

If the other 3 methods do not suit you, use your personal account to set up Tele2 mms.

  1. Go to the official website.
  2. Log in to your personal account
  3. Select the “Tariff and Services” section, then “Phone Settings”;

4. Enter the name of the phone model, click “Get”.

How to set up MMS on Tele2 on Android

If your mobile device runs on Android OS, first try downloading automatic parameters. Options for everyone popular smartphones, including Samsung companies, are in the operator’s database. If you - happy owner rare phone model, configure the service manually. Please note that the options are slightly different for different versions OS.

How to set up MMS on Tele2 on Android up to version 4: in the “Options” menu, turn on the “Transfer connection” item. Next, go to “More”, subsection “Networks” mobile communications", sub-item "APN points". Call the submenu with the key, add a new point and write:

Settings for Android 5.x, 6.x and higher: in the “Settings” menu, find the “Data transfer” subsection, activate mobile data.

Find the “Mobile networks” submenu, APN sub-item, enter the above parameters. Leave the remaining items blank. Call an additional submenu and save the profile.

The adjacent instructions will tell you how to properly set up the Tele 2 SMS center.

Tele2: MMS settings for iPhone

To properly configure MMS Tele2 on iPhone 5, open the “Settings” sub-item in the menu, the “Cellular” tab, turn on cellular data. Enter in the MMS subsection.

How to set up MMS on Tele2 is a question that often requires prompt solution, because exactly this service allows the company's subscribers to exchange multimedia files with various attachments: photographs, videos, audio recordings. In order to connect the service, Tele2 offers several options: configure it automatically or manually.

Basic conditions for successful setup

To set up MMS transmission, you need to take into account certain features of this process:

  • The service is available for connection only after activating the SIM card. If it is not activated in automatic mode, use the Tele2 service by calling 610;
  • in order to create and send MMS messages, first of all you should make sure that the device supports this function;
  • If this service is not supported, then you can view incoming MMS messages on the official website in the MMS Gallery tab. The only condition for its sender is that the message must contain only a regular image. Videos or images accompanied by audio recordings do not open in the gallery;
  • the MMS notification service can only work after setting up an Internet connection;
  • For devices running on the WAP 1.x protocol, correct MMS sending is not guaranteed.

Automatic settings MMS Tele2

As a rule, connecting and setting up an MMS connection is provided automatically by Tele2. To do this, you just need to insert a SIM card into your phone and within a few minutes all the necessary parameters will be entered into your device. If the settings were rejected or cannot be applied, they can be ordered again from the company. To do this, use one of two methods:

  1. Order using a short call service number 679. The operator will accept your application in order of priority, and this often requires you to wait some time. In order for the support service to create an automatic setup, you will need to provide the operator with your SIM card number and phone model. They will respond to your request within 10 minutes standard parameters to install the service of transferring media files to your phone.
  2. Order via "Personal Area" from the company's official website. Here you need to open a tab "Tariffs and services" and select item "Phone settings". In the window that opens, fill in the fields indicating the manufacturer and model of the device, as well as the type of connection settings. We indicate Tele2 MMS as the connection type. After this, confirm the request by clicking the button "Get Settings", and after a short period of time we receive all the parameters on the phone. To activate, we use them by saving and restarting the device.

Important:For correct operation services, the device must be rebooted.

How to configure Tele2 MMS manually?

Almost all modern gadgets support the function of sending and receiving media files and are configured automatically when the SIM card is activated. But there are still situations when the service is not activated and you need to enter parameters manually. This is especially true for not the most popular models.

In order to configure, you need to receive the parameters on your phone by sending a request *202#. Further, depending on the phone model, several options are used self-configuration MMS.

Important:You can activate the service in salons cellular communication, but at the same time this operation will be paid.

How to set up MMS on Tele2 on standard phones?

In order to set the parameters for receiving and sending media files to your phone, you need to go to the connection setup department. The exact name of the section varies depending on the device model. Here we open the MMS settings tab and specify the following parameters:

  • name (profile) – Tele2 MMS (you can use any name you come up with);
  • start page – mmsc.tele2.ru;
  • proxy – enable;
  • IP address – 193.12.40.65;
  • channel – GPRS;
  • APN – mms.tele2.ru4
  • port: for modern devices– 8080, for phones working via WAP 1.1 – 9201.

The remaining fields are not filled in or remain unchanged.

After entering the parameters manually, you need to send a control MMS message to any number. Thus, the service is activated.

How to set up Tele2 MMS on Android?

The Android system is aimed at automatic connection for similar services. But if this does not happen, then the parameters are entered manually. To do this you need to take several steps:

  1. enter the main menu;
  2. open the settings section additional networks communications;
  3. press tab "Mobile networks" and select the settings window new point access.

In the section that opens, select from the presented access points with the name “Tele2 MMS”. Then save and reboot the device. If such a profile does not exist on Android, then press the active button located at the bottom of the screen with the “+” sign to create a new profile. In this case, enter the parameters:

  • MMSC – mmsc.tele2.ru;
  • APN – mms.tele2.ru;
  • access type – mms;
  • MCC – 250;
  • proxy – 193.12.40.65;
  • MNC – 20.

Leave the password and login tabs blank.

After entering all the data, the device should be restarted.

Important:at setting up MMS Tele2 on the Android system, you should change the data only in the specified fields.

Along with others Russian operators, Tele2 is on the list of the main representatives of the cellular communications industry. It offers its subscribers approximately similar services, which means that the questions that arise from the corporation’s clients are almost the same.

And today we will talk about the “painful thing”, about incorrect operation messaging services (text and multimedia), and we’ll figure out how to set up SMS and MMS messages on Tele2.

How to set up SMS on Tele2 phone

We begin our consideration of this very sensitive topic with text messages, which, quite obviously, are widely used today in great demand than sending multimedia messages.

If you suddenly encounter a problem sending a message, the first thing you need to do is check that the recipient's number is entered correctly. Very often it is in this aspect lies the problem, or rather, it simply does not exist.

Is the number listed correct? So we need to “dig” further. In this case, most likely the problem is incorrect setting An SMS center through which all outgoing messages are sent from the phone. Accordingly, in order for the service to work in its normal format, it must be configured manually. Fortunately, this is not difficult to do. And below we suggest you understand how to configure the option on the most popular platforms today:

  • Users of devices running Android operating systems can configure the SMS center number by sequentially performing the following actions:
  1. On on-screen keyboard enter combination *#*#4636#*#* ;
  2. Go to the "Phone Information" section.
  3. Open the "SMSC" option.
  4. Please indicate in the appropriate field SMS number Tele2 message center: +79043490000 .
  5. Update the entered settings.
  • Users of Apple equipment, or rather iPhone, can enter the correct message center number even faster; they will only need to enter a USSD request in the phone format **5005*7672*+79043490000# , then press the call button;
  • Microsoft device users Windows Phone must fulfill the following actions for the device to work correctly with SMS:
  1. Go to the main menu of the gadget.
  2. Go to the settings section.
  3. Open the Applications subdirectory.
  4. Tap on the “Messages” item.
  5. Open the SMS Center Number option.
  6. Indicate the same number +79043490000, and then save the configurations made.

After completing all these steps, you need to reboot your device.

How to automatically set up MMS messages on Tele2

Let’s move on to the less popular types of messages today – multimedia. They can be configured automatically.

Automatic MMS setup for Tele2 subscribers should simply be done free of charge voice call to the number 679 . The settings will be sent to your phone, and after receiving you will simply need to confirm their installation into the device system.

If suddenly automatic setting will not help solve the problem, you must manually enter all the necessary parameters in the gadget you are using. Performed this procedure for each device differently, although the same parameters are entered.

How to set up MMS Tele2 on Android manually

Users of Android devices can independently enter all the settings necessary for the correct operation of their device if they follow the the following points menu of the gadget used. To get to the menu you are looking for, follow these steps:

  1. Open your smartphone's settings.
  2. Navigate to the section called "More".
  3. Tap on " Mobile network" and go to "Data transfer".
  4. Next, click on “Access Points” and create a new point.

After completing the steps described, you will find yourself in required menu. You should provide the correct information there:

  • In principle, you can specify any parameter as the name of the settings, but it is recommended to enter “Tele2 MMS”;
  • In the role home page parameter appears http://mmsc.tele2.ru;
  • The field in which the proxy server address is filled in must be set to enabled;
  • The Internet Protocol (IP) address is 193.12.40.65 , and just below enter the port number - 8080 ;
  • The connection type for correct operation of MMS messages is GPRS;
  • The address is entered as the APN point mms.tele2.ru;
  • The fields for entering the user name and password should not be touched; they must be left empty.

After saving the settings, the device should be rebooted.

How to set up Tele2 MMS on iPhone

Users of Apple devices can configure the correct operation of multimedia messages even faster and easier. They only need to enter the APN access point, as well as the MMSC and MMS proxy parameters we have already specified above. They should be entered in the iPhone’s “Cellular Data” menu, located in the “Network” tab of the device’s main settings.

Video instructions for setting up Tele2 MMS on iPhone

Apple iPhone does not require a reboot after entering new settings for MMS to work correctly.