Windows startup programs. Speed ​​up your computer boot time or How to remove unnecessary programs from startup

Sooner or later, users wonder what autorun (translated into English as StartUp) of programs is, how to set it up on Windows 10 and what it gives. Let's start with the terminology - these are programs and utilities that are automatically launched when you enter the OS, so among them there are necessary software tools, and there are others that devour resources and slow down the computer. We’ll tell you in more detail how to optimize your PC’s performance and change program startup settings in Windows 10.

Spring cleaning StartUp!

Optimizing autorun is an important and rather painstaking process, here is a small list of what should be left and what should be removed:

• various torrent clients;
• Internet messengers (icq, agent, skype, qip, etc.);
• audio players – you can turn on music yourself.

Disable unused Windows Services, to do this go to:

For inexperienced users:

• right-click “Start” → “Control Panel” → “Administrative Tools” → “Services”

For advanced:

• +[r] → “services.msc” → OK.

If you use it, then accordingly leave the parameter unchanged and a small comment where the word “service” will appear in the name - in our list there will be “s.”, and Windows will be replaced by w.

• Windows Search - built-in search;
• Biometric s. w.;
• firewall w. – if there is no antivirus installed, it is not advisable to leave your PC unprotected;
• With. Hyper-V Remote Desktop Virtualization and all related services;
• secondary login;
• With. geographical location;
• With. client licenses (ClipSVC);
• With. AllJoyn router;
• With. shared access to Net.Tcp ports;
• With. portable device listings;
• With. portable device enumerator;
• With. Bluetooth support;
• With. Program Compatibility Assistant;
• With. error logging w.;
• server;
• network s. Xbox Live;
• With. BitLocker drive encryption;
• With. uploading images w. (WIA);
• remote registry;
• application identity;
• fax.

Setting up autostart of programs in Windows 10 OS is mandatory, disabling and deleting was discussed above, and now about what should be left, and if not, enabled, and what is possible - but does not belong to the category of important - in a word - editing startup.

Important and useful include:

• firewalls;
• utilities from the developers of your hardware;
• drivers and utilities for usb, additional monitors and office equipment.

In this simple and analytical way, you can clean up startup on your Windows 10, and then free up resources.

What else does StartUp store?

It is important to correctly configure startup in Windows 10 and continue to maintain it in proper condition, let's see how to do this. Let's take a look at which applications are currently using startup, go to the "Task Manager" in any convenient way:

• ++ – using hotkeys
• Right-click “Start” → “Task Manager”

When you execute any of the above commands, a dialog box opens, then go to the “Startup” tab

A list of programs and utilities that start automatically when the system starts will open; we can perform the following manipulations by calling up the context menu by right-clicking the mouse (hereinafter referred to as RMB):

• “Disable” – the next time you start the OS will no longer be there;
• “Open˽file location” - the directory in which the file to be launched will be called;

• “Properties” - a standard window with detailed information is displayed;
• “Search on the Internet” will help if you don’t know the software and don’t even understand where it came from.

Problems with autorun

Reverse cleaning and optimization situations arise - these include cases when autoloading does not work in Windows 10. There may be several reasons and briefly, about their solution, since in Windows 10, as well as in other earlier versions, startup management occurs in the registry and services, then you should look for errors there.

• The service responsible for launching may be disabled, so we check and launch it.
• There is no parameter in the registry; see below for details on how to add it.
• Critical errors after the update - roll back and try the update again.

Due to the specific nature of work, sometimes it is necessary to autorun a certain program in the Windows 10 operating system, how to do this? Using:

1. Registry.
2. Graphical interface of the operating system.
3. Using third-party programs such as: “AutoRuns”, “CCleaner”, “Ashampoo WinOptimizer Free”, “PC Booster”, etc.

You can find out more about this on our website.

Are you tired of long PC loading times? When you connect any drive, what happens is not what you would like? Are you experiencing random opening of programs when connecting flash drives? This article describes in detail and shows how to make friends with autorun and startup in Windows 7, 8 and 10.

Why does Windows boot speed slow?

Almost all programs are added to startup during installation. Over time, computer startup takes longer and longer. This happens because loading one or two programs takes 10-15 seconds, but loading 7-8 programs can take a minute. This explains the fact that after reinstalling Windows, the boot process is much faster than after 2-3 months of use.

Many users often do not need the entire set of programs at once. Of course, there are those who surf the Internet, listen to music, download “heavy” files, work in Photoshop or another program that requires significant PC resources, at the same time. It all depends on the power of the installed equipment.

It also happens that startup programs simply interfere with normal operation. The computer starts to freeze, games and the Internet do not work properly. To keep your computer running smoothly, it is best to run programs as needed. How to remove programs from startup using standard Windows tools or using third-party programs? This will be discussed in the first part of the article.

How to remove programs from startup?

Editing startup using the msconfig command

One way to see which programs start with Windows and to turn them on or off is by using the msconfig system settings option. This parameter is universal for all editions of Windows, as it is a standard application. Therefore, it can be used in Windows 7, 8 and 10. To do this, go to the Start menu and enter msconfig in the search field. The found parameter must be run as administrator.

How to find the msconfig parameter

In the window that opens, go to the Startup tab. All downloadable programs are located here. Opposite those that are included there is a checkmark. In this way, the user can regulate the download and select only the necessary programs. At the end, you need to click OK and reboot the system. With the next boot, the new settings will be applied.

Editing startup via the msconfig parameter

Startup in Task Manager Windows 8 and 10

An additional startup submenu has been added to the task manager in new versions of Windows 8 and 10, which is not present in Windows 7. This makes it easier to change the settings of automatically downloaded programs. Right-click on the taskbar and select Task Manager. Next, by going to the Startup tab, change the settings at your discretion.

Editing startup using CCleaner

The CCleaner program is very popular as a program for cleaning the system and registry from all kinds of “garbage”. In addition, the utility has advanced system configuration functions. By downloading CCleaner, which is distributed free of charge in many languages, including Russian, you can configure the system and browsers to autoload. In addition, through this utility you can remove programs, clean up disks and restore the system.

After opening the program, you need to go to the Tools section, and then to the Startup tab. Here you can remove both Windows startup and extensions launched with browsers. Moreover, for each browser you can configure the settings separately. In the same menu there is editing of the context menu. This menu appears when you right-click. Unnecessary functions can be disabled.

Having selected the required program with the left mouse click, click turn off in the right part of the window. We do the same with all programs that need to be removed from startup.

Editing startup in CCleaner

Autorun settings for USB drives and drives

When working with a computer, “mutual understanding” with the PC plays a very important role. For example, when you issue a certain command, you expect a certain result. When you insert a music disc into the drive, you want the music to play. If you are going to transfer fresh photos from a flash drive to your hard drive, you would like to see a folder with pictures displayed on the screen.

Very often, if the settings are incorrect, failures begin. USB drives refuse to open automatically when plugged in, and for some reason photos don't import the way you'd like them to. When installing a program, it sets itself as the default for certain types of files, or for some other user actions.

This part of the article will discuss the autorun settings for disks and other removable storage media.

Managing startup using Control Panel for Windows 7

The easiest and most effective control method is to go to the Computer Control Panel through the Start button. There, find the Autorun option and select settings for each media type.

Here you can see all the media ever connected. Even those that are not currently connected. For example, your digital camera or tablet PC. At the very top, you can remove or check the box “use autorun for all types of devices.”

Changing startup settings for different media types

By selecting any media, you choose what the system should do when connecting this type of media. Next you need to save the settings. The next time you connect a flash drive or disk, Windows will perform the functions you specified.

Managing autorun in Winows 8 and 8.1

In editions 8 and 8.1, autorun management occurs a little differently. Through the Start button, you need to go to the computer settings, and then to the Computer and Devices submenu. There, in the list of parameters, you will see Autorun. By clicking on it, you will be able to select default autorun options.

Editing autorun in Windows 8 and 8.1

Just like in Windows 7, the settings need to be saved and the system restarted. Done, the parameters have taken effect.

Autorun media options in Windows 10

For Windows 10, AutoPlay settings are located in the Computer Control Panel. To do this, go to Start, then click Settings, here we see the Devices menu. In it we find the Autorun line. Just like in Windows 8 and 8.1, we edit the necessary parameters and save them. By restarting the computer, the selected settings will work.

Autostart in Windows 10

How to disable autorun and startup through the local group policy editor

If you want to turn off autorun and startup completely, for any reason, this can easily be done in the Local Group Policy Editor. Press the key combination Win (the button with the Microsoft icon) and R on the keyboard. Next, enter the command gpedit.msc and press Enter. In the window that opens, you need to go to the Computer Configuration - Administrative Templates - Windows Components - Autorun Policies branch. Select the last submenu with the left mouse button, and on the right we will see the option Disable autorun.

Local Group Policy Editor

In the new window, you must check the Turn off and save settings box. By restarting the computer, the changes will take effect.

What should I do if Adobe Lightroom opens when I connect a flash drive?

If you edit photos in Lightroom, then you may be familiar with the situation where when you connect a USB drive, this photo editor opens. This happens because when installing the program, by default it sets itself as priority when connecting flash drives. This option is very easy to disable in Lightroom itself.

After entering the program, go to the Edit menu and select Preferences.

How to find flash drive startup options in Lightroom

In the Basic tab, you need to uncheck the box “Open the import dialog when a memory card is detected.” After that, click OK and close the program. After a reboot, when you connect a flash drive, the program will no longer associate itself with the drives.

Uncheck the box responsible for opening the program

If when you turn on your computer, your operating system takes a very long time to load, then the problem is in those programs that open automatically. A whole bunch of applications are running at the same time. This slows down the computer significantly. Therefore, you need to disable automatic launch of applications. We will look at the most popular methods for various systems.

Autostart programs in Windows 7. MSConfig utility.

This method is very simple. Go to the Start menu. Next, enter msconfig in the search bar. Open the first (and only) result.

Here you see a huge list of applications. And they all start at boot. Please review the entire list carefully. Uncheck those utilities that you do not need at startup. Then save your changes and be sure to restart your computer. The OS should load much faster.

Tip: If you accidentally disable some essential utility, don't worry! Just go back and check the boxes in the right place.

How to disable autorun through the registry?

This is the most difficult way. It is better not to do anything in the registry, as you can disrupt the operation of the computer if you do something wrong. So, open the Start menu. Below, in the search bar, enter regedit.

Then find the two Run sections. In the screenshot you can see the full paths. One of them is responsible for automatic launch for the current user, and the other for all users.

Go there and simply remove the components of those utilities that you do not need.

Programs to disable autorun

There is a utility called Autoruns, it is quite powerful. In it you can find absolutely all applications that are launched upon boot.

You can download it from this official website: https://download.sysinternals.com/files/Autoruns.zip.

Then unpack the archive and run the utility. This is what she looks like:

Go to the Everything tab. This means that it contains programs that automatically open on your computer. Afterwards, uncheck the boxes next to those that you want to disable at startup.

CCleaner utility.

This utility is convenient because, in addition to disabling autorun, it can also remove any junk from the computer, making it even more productive.

You can download it from this site: http://ccleaner.org.ua/download.

Select the required installation. If you don't know which one to choose, then choose the first one.

Disable unnecessary utilities, and they will no longer bother you the next time you start.

This is how you can easily and simply disable any program from startup. The following methods will be discussed for other versions of Windows.

How to disable autorun programs in Windows 8

Through the system partition.

Hold down keys such as Win + R.

A window like this will open. Type shell:startup, then click OK.

The current user's applications are stored here.

And if you want to open it for all users, then enter shell:common startup.

Now just click on any of the folders that you don't need on startup and delete it.

Via Task Manager

In the following versions of operating systems, automatic startup is not located in the MSConfig utility, but in the Task Manager. Call up the context menu on the control panel with the mouse and select the item you need.

Select the application you don't need and click on the "Disable" button.

How to disable autorun programs in Windows 10

The methods listed for version 8 are suitable for this operating system. Even the location of the folders in the registry is the same.

Advice: use any methods other than the registry. Important data is stored there and can be easily damaged. If you don't understand the registry well, it's better not to even go there.

Thus, now no unnecessary applications will interfere with the computer boot. Just don’t disable all the utilities in a row. Of these, some are extremely important for the full operation of the computer.

One of the reasons for the slow operation of the OS is the programs that are present in autorun. As a rule, not all of them are needed for Windows to function correctly, so some can be removed, which will improve the performance of the computer, it will boot faster and respond to your commands.

You will learn further about how to disable startup programs in Windows 7. However, remember that there are utility applications, the deactivation of which can lead to malfunctions of the operating system. By clearing the list of automatically included programs, you will notice that it will take significantly less time to load the OS.

Why from autorun?

Many applications found in “Startup” affect the loading speed of the operating system. You've probably noticed that a computer that was purchased relatively recently begins to load less quickly after a few months, and even slows down during operation.

After installing various applications, they themselves are added to “Startup” without your permission. This is why it is necessary to disable startup of programs in Windows 7 that you very rarely use, or you don’t need them at all. During operation, all these applications use computer resources, for example, RAM, which affects its performance.

Of course, not all programs in Autorun need to be removed, since some of them are really needed, and there are some that must be loaded with the OS. So before you clean out your Startup list, make sure you're not disabling anything important.

Why are applications added to Startup?

As mentioned above, many programs are added to “Startup” independently. For example, you download an application, and they offer you another one, which is placed in Autorun without your permission. It’s one thing when it’s a really necessary program, for example, to control a video adapter. But if you don’t need the application, then you need to know how to disable startup programs in Windows 7.

Often, users add programs that they most often need to Startup. For example, if you constantly need to be on Skype, you can include it in the startup list. But there are also mandatory applications, such as an antivirus or firewall.

If you are not satisfied with the startup speed, regular “brakes”, and you cannot find where to disable startup programs in Windows 7, then read about it further.

How to programs

So, you decided to get rid of some applications in Startup, but you don’t know how to do it. In fact, everything is very simple. To see what programs you have there, go to the “Start” menu, open “All Programs” and find the corresponding section, which is called “Startup”. By clicking on it, you will open a list of all applications located in “Startup”.

If you want to remove a program from Startup, you can do this using the command line. Call it by pressing the “WIN + R” buttons, and then enter the “msconfig” command there. Click “Enter”, “System Configuration” will open, where you will need to go to the “Startup” section.

Now you can independently disable startup of Windows 7 programs. Uncheck the boxes next to those applications that you do not use. By the way, if you don’t need them, then remove them through Programs and Features.

How to disable startup programs in Windows 7 using Autoruns and CCleaner

You can't remember which keys to press to call it up. Or perhaps you want to open a list of Startup programs in just a few clicks. Then you can install on your computer one of the free applications that allow you to do this.

The first program is called Autoruns. It is recommended to download it from the official website. At the moment there is only an English version, but don’t be afraid, because the interface is designed in such a way that even a novice user can figure it out.

Another popular application is CCleaner. You can also download it from the official website. In order to disable startup programs in Windows 7, you will need to launch CCleaner and go to the “Tools” section. Now select “Startup” and single-click on the application that you want to remove from “Startup”. There are corresponding buttons on the right.

Before deleting something or, conversely, adding something to Startup, you need to familiarize yourself with a few tips from experienced users:

• It is not recommended to remove the antivirus program from Autorun, since after loading the OS, you may forget to turn it on, which means there is a threat of virus penetration.
• If you don’t know whether you can disable a program, then look for information about it on the Internet, and then make a decision, because some applications are service applications.
• In addition to cleaning Startup from unnecessary programs, it is recommended to disable some services that can be found on the tab of the same name in the System Configuration window.
• Once you learn how to disable startup programs in Windows 7, do this with all unnecessary applications to ensure minimal load on the system during startup.

Conclusion

As you can see, it’s not at all difficult to open “Startup” and remove all the “garbage” from there. You just need to remember one thing and the “msconfig” command. After doing these steps, you will notice that the next time your computer will boot much faster, especially if there were a large number of applications in Startup.

Often, users, having downloaded a movie from a torrent, forget to close the client itself and remain on the distribution. As a result, Internet pages open much more slowly. However, if you remove this application from Startup, the problem will be solved. That is, when you need to download something, you manually launch the client and close it as well.

So, now you know how to disable startup programs in Windows 7. It is recommended that you regularly check what you have there. By the way, some applications themselves ask whether to add them to Startup or not.

Each of us uses a certain set of commands when working on a personal computer. If this is your workplace, then it takes a lot of time to download all the necessary software. You go to the computer, turn on the power of the system unit, after loading the operating system, you begin to launch many shortcuts, wasting your time on this, although you could be doing something more useful. To make life easier in such a situation, autostarting programs when you turn on the computer can come to the rescue.

What is autorun and why is it needed?

So, autostart. As the name implies, these are programs that launch without your command when the operating system starts. But they should not be confused with viruses. Yes, some malicious software can be registered in autorun, but this is not what we are talking about. Some programs, such as Skype, are registered in autorun and removing them from there is quite problematic, but you can disable them. Some programs are not recorded in autorun, but continue to annoy users by appearing on the monitor when the personal computer boots, but this scourge can be dealt with.

General methods

If you're tired of turning on your computer, there are several ways to remove annoying applications. Let's first look at some of the options found in most operating systems up to the Windows 8 generation. These include autorunning Windows XP and Windows 7 programs.

The first method is best if you want to add a program to startup, because it will be easier to remove it from there if you need to. The second point answers the question: from autorun.

Windows 8: autorun features

Since our beloved developers managed to change everything here, the startup of Windows 8 programs is also different from all previous versions of operating systems.

In addition to the above methods, the new operating system provides the user with the ability to control autorun via On the one hand, this is much more convenient, because getting to this utility has become much easier. On the other hand, it is now available to even the most unenlightened users who are capable of ruining something.

As you can see, Windows 8 program startup is quite easy to manage. To disable or enable a program, simply click the corresponding button.

CCleaner is a useful program

If you don't want to rummage through the "insides" of your machine to set up programs to start automatically when you turn on the computer, you can use special applications. The leader among programs serving operating systems is rightfully the CCleaner utility. Currently version 5.02 is available. With its help, you can also program programs when you turn on the computer. To do this, after launching the application, go to the “Service” tab, and then to the “Autostart” sub-item. You will see a whole one in which you can configure autorun not only when loading the operating system, but also when launching individual applications (for example, specific browsers).