Installing windows 7 from a flash drive. Installing Windows from a USB flash drive via BIOS

Content

Almost all modern laptop computers (except Apple) use an operating system from Microsoft. Sometimes a situation arises in which it is necessary to reinstall the OS, so it would be useful to know how to reinstall Windows 7 on a laptop or netbook. You can use several options for launching the program.

How to reinstall Windows 7 on a laptop using built-in tools

A situation arises when there is a need to reinstall Windows 7, but there is neither a licensed DVD nor a flash drive on hand to which you can copy the system files. On all laptops, be it Acer, Asus or Lenovo, you can run a recovery or OS installation using a disk image. It can be created in advance or found on the Internet, but it must be stored on the computer, and the laptop itself must be turned on.

Reinstalling Windows 7 on a laptop requires special programs that can recognize images, these include:

• Diamond tools;
• UltraISO.

To do this, mount the image into this program and run the file with the .exe extension. If windows is simply archived, then there is no need to unpack it. Open the repository using winrar or winzip, again find the same executable file ending in .exe. After clicking on it, the standard process of reinstalling the operating system will begin.

How to reinstall Windows 7 from a flash drive or disk

In cases where the laptop cannot boot the OS on its own, you should use another computer to create the installation media. Before installing Windows on a laptop from a flash drive, you need to find an image and prepare the drive for writing files. If you have a licensed DVD, the process is much simpler, but there is an option that allows you to create it yourself.

Preliminary preparation of software for OS installation

To make bootable media from a DVD or flash drive, it is not enough to simply copy files or an image onto it. To do this, you should prepare the necessary version of Windows itself, using utilities to make an installation CD or flash drive. For the whole process you will need:

1. The Windows 7 program itself.
2. DVD or flash drive minimum 4 GB.
3. ImgBurn utility or Windows 7 USB-DVD Download Tool.

Creating a bootable USB flash drive or disk

If you have a DVD-rom, reinstalling Windows 7 on your laptop can be done through it. You will need a Windows image and the ImgBurn utility, which can be easily found on the Internet. The creation process is as follows:

1. Insert a blank DVD.
2. Launch the ImgBurn program.
3. In the window, select “Browse” and specify the path to the OS image.
4. Do not set the maximum speed for recording; it is better to select the minimum.
5. After recording, a window will appear, you need to click “Ok” and the finished disc will jump out of the device.

Many models of modern laptop computers and netbooks no longer use CD-ROM, so it is useful to be able to reinstall Windows 7 on a laptop using a USB flash drive. The process for creating installation media is as follows:

1. Insert the drive.
2. Launch the Windows 7 USB-DVD Download Tool.
3. In the window, select the path to the system image file.
4. Next, the program will prompt you to select from the menu what you need to create: DVD or USB Device. Choose the second one.
5. Specify the path to the drive.
6. The utility will warn you that all data from the media will be lost. Agree and the creation of the installation flash drive will start.

BIOS setup

To restore or reinstall Windows 7 on a laptop, you need to change some settings in the BIOS. First, restart your computer, and at the initial boot screen, press “del” (works for most models, but F8 sometimes works). The mouse does not work in this system, so all actions must be performed using the arrow keys on the keyboard. When going into BIOS, do the following:

1. In the "Boot" section, find the "Boot Device Priority" section. This setting will indicate where to start the system from.
2. In the menu, make sure that USB DEVICE is first in the list in order if you are using a flash drive or your CD-Rom if it is a disk.
3. Press F10 and confirm that you want to save the changes.

Installing Windows 7

After all the steps described above, the installation will begin. The developers tried to make sure that the user does not experience any inconvenience and the whole process occurs as automatically as possible. The person will be offered several parameters that he must determine independently, but there are no difficulties with them. The entire installation, search for drivers for the motherboard, processor will be performed independently by the system, they are built into the OS and will be immediately installed with it on the hard drive. When reinstalling, the laptop must be connected to power.

Installing Windows 7 from a disk or removable drive has one algorithm. The user will need to follow these steps:

1. Wait until the program copies all the necessary files. How long this will take depends on your PC configuration.
2. Next, a license agreement will appear; you must confirm it.
3. In the next window you will be offered the choice of restoring the system or performing a complete reinstallation. It is worth choosing the second option.
4. At the next stage, you need to select a partition on which the OS will be installed. As a rule, select section C; all personal data from it will be deleted.
5. Confirm your choice, and then the system reinstallation process will begin.
6. During the reinstallation, the computer will reboot several times; after the first time, you will need to remove the bootable media and then reinsert it.
7. At the end there will be several parameters that need to be set: time zone, if desired, set a password for the account, enter the license key.
8. The utility will carry out all other actions independently.

These detailed instructions for reinstalling Windows 7 are designed for any level of user, even for dummies. To reinstall Windows 7 quickly and without consequences for important information, you need to prepare your data and hard drive for installing a new system. Let's do the entire Windows 7 reinstallation step by step together. Let's start with the old operating system that is installed on your laptop or computer now.

Preparing to reinstall Windows 7

Any complete reinstallation of Windows 7 on a laptop, netbook or computer should begin by saving important information to another separate media. For example, on a flash drive or external hard drive. Surely you have important information that you need to save to avoid its loss.

Here you need to proceed from what OS is installed on the computer now. For example, if you want to reinstall XP on Windows 7, then you may need to look for your information in other places than in Windows 7. In any case, double check all possible logical drives, all folders. The most common places where most users store information are:

1. Desk.

2. “My Documents” folder

3. Drive “C:”

Of course, we cannot tell you about all the important places where information is stored on your laptop or computer;) . But the advice is to double check everything, since our goal is to reinstall Windows 7 on a clean, formatted logical drive. Why is the advice to reinstall Windows 7 on a clean medium?

Firstly, many users acquired several viruses during the operation of the old system, which is not necessarily the case, but it is possible. By the way, many people decide to completely reinstall Windows 7, precisely because of viruses. This is the last measure; you can always try to unlock the computer using an antivirus or try to remove the banner through a system restore point.

Secondly, installing Windows 7 on an unformatted logical drive will only add to problems in the future. After all, all the programs will remain on it, which will still have to be reinstalled, as well as the folder with the old Windows.

Selecting Windows 7 version

Before we begin to describe the installation of the new OS, a few words about the distribution of your Windows 7. This OS, like the previous Vista and subsequent generations, has two branches: 32-bit and 64-bit. The 32-bit version of the system does not allow the use of more than four gigabytes of RAM. This is due to the peculiarity of the architecture. How to reinstall licensed Windows 7? There are several versions of the operating system:

Windows 7 Starter. This version of Windows 7 can hardly be called a full-fledged OS. Almost all functions in it are blocked by Microsoft. Windows Starter was installed on some laptops. The maximum possible amount of RAM that this 32-bit version of Windows can use is 2 gigabytes.

Windows 7 Home Basic. It has a very limited set of functions. Also distributed as an OEM version with laptops. The maximum memory capacity is 8 gigabytes.

Windows 7 Home Premium. Suitable for most users, allows you to use most of the necessary functions.

Windows 7 Professional. Almost complete set of functions.

Windows 7 Enterprise and Windows 7 Ultimate. Top versions, one of which is intended for business, and the other for home use. Everything is described in more detail in the table.

It is not recommended to use non-original assemblies, of which there are plenty on the Internet. This is especially true for laptop owners. The fact is that such assemblies may contain errors, disabled Windows 7 services, and simply surprises in the form of malware. Now seven is not so expensive, and you can buy Windows 7 by becoming a license holder.

Reinstalling Windows 7 from a USB flash drive

To reinstall Windows 7 from a flash drive, you need to have on hand one of the versions presented in the table above (the main thing is not Starter :)). DVD drives are not widely used today. Instead, they were replaced by flash drives. Reinstalling Windows 7 from a flash drive, without a disk, is more convenient. You can always take a USB flash drive with you, without worrying whether your computer has a DVD drive or not. In addition, not all laptops are equipped with drives.

To make a bootable USB flash drive with Windows 7, just burn an ISO image of your new system with a special program. The process of creating a flash drive with Win 7 is described in detail in the article “How to make a bootable flash drive with Windows 7.” The Windows 7 reinstallation program listed in the article should help. We hope there will be no difficulties.

After you burn the image to a flash drive and save important data, you can begin reinstalling Windows 7. Reinstalling Windows 7 via BIOS is not as complicated a procedure as it might seem at first glance. To do this, you need to reboot and enter the BIOS, then set to boot from a flash drive. Next, exit the BIOS, saving the settings. The computer will select the drive and begin installing Windows 7.

How to reinstall Windows 7

Let's proceed to the step-by-step reinstallation and find out how to reinstall the Windows 7 system. After downloading the installer, we find ourselves in the step-by-step installation system. In the first step, select the language, time format and keyboard settings, here you can leave everything as default and click the “Next” button.

At the next stage, we begin installing Windows 7 by clicking the appropriate button.

Select the version of Windows 7 for which you have a license key.

We accept the license agreement by checking the box and moving on to the next step.

At this stage, you need to select the “Full installation” option, since, as we said earlier, it is better to install Windows 7 from scratch.

Next we get to the important stage of installing Windows 7. Here you need to select the partition on which the new operating system will be installed. Remember that they asked you to save all important information? It's time to format the logical drive with old Windows. To do this, let's move on to the next installation stage.

Select the desired hard drive partition and click on “Format”. This is reinstalling Windows 7 with formatting the logical drive.

If you have saved all important data, feel free to agree. If not, then there is still an opportunity to do this by restarting the computer and specifying the hard drive in the BIOS.

Our disk for almost reinstalled Windows 7 has been created. Those who need to increase or decrease its volume can use the “Expand” button.

After a short installation, the installer will ask you to enter your name or nickname, as well as name your laptop or computer.

At the next stage of reinstallation, you need to enter a password. This may not be done if only you use the laptop or computer and a stranger cannot access it.

The long-awaited entry of the serial number of a licensed copy of Windows 7. Do you have it? ;)

In the next reinstallation step, you will be prompted to install built-in Windows protection. This, of course, is not a full-fledged antivirus, but it will save you from certain types of attacks. True, a firewall can become a problem when connecting a laptop or computer to the network. Therefore, the ideal option would be to install a third-party antivirus and disable Windows 7 protection after that.

The final stage of reinstalling Windows 7. If your computer or laptop is at home, then choose your home network. For most users, this is the network configuration option they need in Windows 7.

After selecting the network type, Windows 7 will finally boot.

This is the instruction on how to properly reinstall Windows 7 on a laptop or computer

Have you decided to install or reinstall Windows 7, but you don’t have a blank DVD or a Windows 7 distribution disc at hand? Do not despair, installing windows 7 from a flash drive not such a difficult task! Not one, but two choices at once! You can install Windows 7 using a regular flash drive or a mobile flash drive. It's very simple, just follow the instructions below and everything will go without any problems.

Before installing Windows

You also need to download the appropriate drivers for your computer and save them to a flash drive or DVD. This is because Windows may not initially have drivers for your computer's network card or adapter. If you do not do this, then after installing Windows 7 you will not be able to access the Internet.

Windows 7 installation instructions

1. Preparing a flash drive with Windows 7

We need to burn the “.iso” image with the Windows 7 distribution onto a flash drive. An excellent program will help us. After installing the program, if you are not going to buy a license, you can use the “trial period”.

Now you need to open the iso image with the distribution. To do this, click on the menu “File -> Open...”:

In the window that opens, indicate where the iso image is located:

It's time to insert the flash drive into the computer.

Attention : The contents of the flash drive will be permanently deleted during the recording process. Therefore, it is premature to copy all important data either to your hard drive or to another computer.

Click the “Format” button:

Assign the file system type and click the “Start” button:

A notification will appear, click OK.

Formatting completed successfully.

Now click on “Record”:

Waiting for the recording to complete:

That's it, now you have a flash drive with the Windows 7 distribution.

2. Setting in BIOS to boot from a flash drive

Turn off the computer, insert the USB flash drive and only then turn on the computer. This is done because sometimes computers do not recognize flash drives inserted in the BIOS after the computer is turned on. You can also configure booting into the “BIOS” from the phone’s memory card (I’ve heard many people do this), but please note that this is possible in all laptops.

Our computer (I’ll show you using a laptop as an example). To do this, you must press a certain button when your computer starts booting. You can recognize this specific button when loading at the bottom of your screen. As a rule, this is “F2” or “Delete”, but it may be different.

After entering the BIOS, go to the "BOOT" tab to change the boot order. To change the order, as a rule, use the F5 and F6 buttons or using the menu that opens. We change the boot order so that your flash drive comes first. And it looks something like this.

As sad as this sounds, today there is a misconception that the problem of how to install Windows 7 on a laptop is quite complex and practically insoluble for the average user. This is partly true, but often such myths have no basis.

Windows 7: first acquaintance

Windows 7 OS is one of the most popular and in-demand systems among computer users. Very often it is installed not so much on stationary computer terminals as on laptops.

Among the versions available for installation, you can find several main assemblies: initial, home basic, home extended, professional and maximum. Actually, which version the user chooses to install depends only on him. In any case, the problem of how to install Windows 7 from a disk to a laptop has a common solution for almost all models of any manufacturer. The same applies to installing operating systems from USB devices, popularly called flash drives.

General concepts about installing Windows 7 on laptops

As for the answer to the question of how to install Windows 7 from a disk to a laptop, usually there are no special problems here. This is understandable, because laptops, as a rule, are always equipped with optical CD/DVD-ROM drives. So to install the system, it is enough to have the original disk or a copy of it.

In the future, of course, some specific situations may arise, but the same problems, say, how to install Windows 7 on an HP laptop or on a model from another manufacturer, generally appear only at the final stages of the installation process and most often come down to the correct installation of device drivers. This will be discussed a little later.

Installing Windows 7 on netbooks

It's another matter when a user tries to install an operating system on a netbook. This is where the problems begin in most cases. This is due to the fact that netbooks do not have optical drives, and the system must be installed from a flash drive. However, here, as practice shows, the problem of how to install Windows 7 on a Lenovo laptop or some other model also has a general solution.

Here, the fundamental link in the installation process will be the correct recording of the installation distribution image onto a removable USB drive, and this must be done in such a way that the flash drive is bootable, and the launch must be carried out before the start of the existing system, if there is one on board.

Pre-preparation of the disk

Now let's look at some preliminary steps, without which the question of how to install Windows 7 on a laptop cannot be resolved. It’s good if the user has an original disk with a certain version of the operating system. But what to do when he is missing?

In this case, you need to either make a copy of it or burn an installation disk from a previously created image. You can create such an image using any program such as UltraISO or Daemon Tools. In addition, you can use the standard tools of the OS itself and create a boot disk.

The first option looks preferable, since this is how you can create an exact copy of the distribution, which will be practically no different from the original. I think there is no need to explain exactly how this is done, since the process of writing an image to disk is very similar in all programs. Sometimes only the menus and corresponding commands differ. This comes down to using the image burning functions, after which a blank optical media is inserted into the drive, and then the path to a pre-created image file is specified. The image itself is created using the same programs using the appropriate function and saving the image file on the hard drive or in a logical partition.

Creating a bootable USB flash drive

In some cases, for example, the answer to the question of how to install Windows 7 on an Asus laptop (or any other) may directly depend on the device model itself. As is already clear, we are talking about netbooks, although they are classified as laptops. Here you will initially need to create a bootable USB flash drive.

This is done using the above software packages with the only difference being that the image is written not to an optical disk, but to a removable USB drive. The pre-imaging remains unchanged. Below we will show you how to install Windows 7 from a flash drive on an Asus laptop. Moreover, this does not apply to any specific model or manufacturer.

Required BIOS settings

In the preparatory process, it is important to understand how to install Windows 7 on a laptop via BIOS. The fact is that when using the default BIOS settings, an already installed OS (for example, Windows XP) will simply ignore the media with the “seven” distribution kit. Here you need to take a responsible approach to setting the priority order of boot devices.

To enter the BIOS, depending on the laptop model and the manufacturer of the BIOS itself, the keys Del, F2, F12, etc. can be used. Now you need to find the Boot section (Boot Sequence) or something similar, where the Boot Device Priority line will be indicated . By default, the first device is the HDD.

If you plan to install the system from an optical disk, the first device you need to specify is the CD/DVD drive. If the question is being resolved, say, about how to install Windows 7 from BIOS on a laptop when using a flash drive, naturally, it is this that needs to be specified as the first priority device. However, sometimes problems may arise in that the USB drive may not be displayed in the settings. The main reason why this happens is only that the flash drive must be inserted into the appropriate USB port before turning on the laptop (netbook) and calling up the BIOS settings.

After all the settings have been made, you must save the changes before exiting (Save and Exit Setup), after which a reboot will occur. If everything is done correctly, the installation of Windows 7 should start from the selected media.

Start installation and format partitions

So, the start has been made. Don't rush to rejoice. Of course, the installation process is automated. First, as usual, you need to select the system language, time and date format, and then specify the keyboard layout. Let us immediately note that entering the activation key and license is postponed until the end of the process. The fact is that “seven” can work in normal mode for up to 30 days as a regular shareware program.

Now, in the question of how to install Windows 7 on an HP laptop (or on other models), you should correctly choose which version of Windows 7 OS should be installed. This is due to the fact that the license key is designed specifically for a specific assembly and, after installing any other, will not lead to activation of the system simply because of its inconsistency.

Now all that remains is to accept the terms of the installation and use agreement. Next, a window will appear in which there are two types of installation: update and full installation. Almost all experts and users recommend performing a complete installation from scratch (before starting the process, you need to copy the files and folders necessary for the user, since formatting will destroy the data). Another advantage of such an installation is the fact that the new system will not “pick up” system errors or, even worse, viruses from the old one.

Problems arising at the initial stage of installation

The installation wizard will prompt you to select the partition into which the new OS will be installed. It will need to be formatted. And as it turns out, it is at this stage that the question of how to install Windows 7 from a flash drive to a laptop (or from an optical disk) may seem insoluble, since the system flatly refuses to perform the formatting operation, and sometimes also indicates that formatting requires hard drive driver.

Let us say right away that you should not be afraid of such messages. In fact, everything is connected only with the fact that some hard drives may contain incorrect MBR boot records or errors in disk layout. In some cases, the problem may be due to the presence of different file systems on the disks and their partitions.

You can get out of this problematic situation by running the command line directly during the installation process. To do this, use the key combination Shift + F10. In the window that appears, you must enter the command bootrec /fixmbr, which allows you to restore the bootloader.

Sometimes, in solving the problem of how to install Windows 7 on a Lenovo (or some other) laptop, re-entering the BIOS can help, where in the SATA controller settings you need to change the hard drive access mode from AHCI to IDE.

After this you need to return to the installation. In this case, the problem of how to install Windows 7 on an Asus laptop (as an example) when the error described above occurs should disappear, and you can proceed to directly formatting the disk or partition (you need to click on the “Format” hyperlink below). All you have to do is wait for the process to complete, after which a window will appear indicating the main steps that will be applied during the installation process.

Initial system settings

Once the installation process is complete, the user will be required to enter the laptop name, username (if prompted), and then the product serial number.

After the steps described above, the same answer to the question of how to install Windows 7 from a flash drive on an Asus laptop or an Acer netbook (or even from a disk on other device models) comes down to setting the time zone, time and date. Then, if desired, you can configure the network. If there is no clear certainty in choosing the type of network, you can postpone this process until later.

When everything is done, the system will start for the first time, after which the familiar “Desktop” will appear.

Installing device drivers

But that's not all. You need to understand that some versions of the 7 (especially unofficial ones) are supplied without the necessary driver package. For example, the problem of how to install Windows 7 on an Acer laptop with a full set of drivers can be solved quite simply if, when purchasing the device itself, there was a special disk with drivers among the additional software. This applies to any laptop model.

As a rule, this issue is resolved quite simply. True, the drivers will have to be installed manually if there is no special “Wizard” on the disk, which, upon startup, will install absolutely all device drivers that are present in the laptop itself as components. As you can see, the problem of how to install Windows 7 on a laptop is not as terrible as some users tend to describe it. Yes, of course, you will have to pay attention to some specific settings and problem solving during the installation of the “seven”, but a user of any level of training can solve this. As they say, there would be desire and a little patience.

Installing additional utilities

As for additional software, the problem of how to install Windows 7 on a laptop with all the capabilities of the system can also be solved quite simply. You will need to additionally install an antivirus, archiver, codecs, office programs, etc. However, if all this is on the original disk, there is nothing to think about; you should install applications from such a disk (usually Acronis is present as the shell).

It goes without saying that during the installation of the system itself or after finishing the “Wizard”, you can split the hard drive into logical partitions. Today you can find a very large number of utilities for this. Even some disks have their own tools like Partition Magic, etc.

Windows 8 compatibility issues

Finally, one more problem. Let's say we need to solve the question of how to install Windows 7 from a flash drive on an Asus laptop with G8 preinstalled. Version 7 and 8 systems have different file systems. Although it is believed that the “seven” supports the “eight” file systems, in fact this is a conditional statement. In practice, this causes a lot of confusion. A way out of this situation may be to enable Legacy compatibility mode in the BIOS and then convert the G8 partitions from GPT or UEFI to the standard G7 MBR format.

Conclusion

Probably, many have already noticed that the question of how to install Windows 7 on a laptop, although it has several specific points that you will have to pay special attention to, is nevertheless not too difficult. Depending on the laptop model, you may sometimes have to tinker. But if all the settings are made correctly, and the original CD with drivers is included in the kit, there is no need to strain too much.

Interested in installing Windows 7 from a flash drive to a laptop? This means that your computer does not have a drive or it is broken.

What to do in a situation where it is not possible to boot from a CD? There is a solution: you can install the operating system from a flash drive.

Before we begin describing the process of installing Windows from a Flash card, we will list all the main stages of this process, and then consider them in more detail:

• First: preparing the laptop for installing the operating system (in this case Windows 7)
• Second: preparing a flash drive
• Third: setting up UEFI to load OSes from a Flash card.
• Fourth: the installation itself.

Note: UEFI is a replacement for the outdated BIOS.

Preparing a laptop for installing Windows 7

First, you need to transfer all the necessary files and documents from drive C to drive D. Usually they are located in the “My Documents” and on the “Desktop” folders.

The installation files for some applications should be found in the Program Files folder.

Alternatively, you can transfer all important information to another flash drive (not the one from which the installation is taking place).

Preparing a flash drive for installing the operating system

First, delete or copy all the necessary information from the flash card, because files and folders will be deleted from it automatically in preparation for installation.

The flash card must be at least 4 GB in size.

Then you will need Windows 7 installation files and folders, preferably a disk image in iso format, and the UltralSO utility for installation (you can download it by typing an identical query in the search).

All is ready? Then let's get started:

Download, install and run the utility. Here's what you'll see:

Click "Trial Period". A new window will open in which you need to select “File” - “Open” and point to the image from which the operating system will be installed.

Then insert the flash drive into the computer and select “Format”. After the process is completed, click “Burn”.

The process will end and you will have a flash drive with the Windows 7 operating system downloaded onto it. Now you can move on to the next stage, the installation itself.

Advice: It is not necessary to use exactly the utility described in the article. It is just one of many programs that can help you create an installation flash drive.

Setting up UEFI to boot an OS from a flash drive

You can’t just insert a flash drive into your computer; the computer needs to boot from it when you turn it on. How to do it? Using UEFI. It is on every computer.

It contains all the vital settings. One of them is the boot order. We will stop there.

To enter UEFI, press a specific key on your keyboard when the system boots. (This key is different on many laptops; it is displayed on the screen. Usually it is F2 or Esc).

When you enter, a menu will open to you; you will immediately recognize it by its blue or gray color.

Many people do not have time to press the Windows login key in time and the computer simply boots. In this case, you should reboot and try again.

After logging in, you should enter the menu and find the boot order of devices in the settings. Here are some screenshots for example:

Use the arrows to select the device to boot first. For beginners, there is special help on navigating UEFI. She is always in a visible place.

Choose USB-HDD. Then exit UEFI using the “Save and Exit” button. All changed information will be saved. The computer will automatically restart.

Now we move on to the next step, the very final one.

Installing Windows 7

If you did everything correctly and set the settings correctly in UEFI, then you will see the message “Press any key to boot a CD or DVD.”

Of course, in English, so a screenshot is attached:

Advice: It often happens that there is no inscription. This suggests that you made a mistake somewhere. You should go into UEFI again and check whether all the boot settings you made from the flash drive are saved. If everything is correct, then your flash card is not bootable at all, and for the operation you need to look for another operating system image and record it.

It may happen that the installation image contains other utilities besides Windows 7. In this case, you need to select the item that is suitable to start the installation.

Good news: Almost all the operations listed below will be performed automatically by the computer.

And all the settings that you don’t like can be changed to your taste after the installation is complete.

A window will open in which you need to select which version of Windows 7 you will install. Click on the one for which you have a security key.

Often it is glued to the inscriptions on the bottom of the laptop. The system will prompt you for it before completing the installation.

You don't have to enter the key right away. You can do this within a month.

A window with a license will pop up, check the “Agree” box and move on.

Then select the full installation.

Click "Disk Settings". Usually, beginners have difficulties here, so let’s take a closer look at this point.

Disk setup

It happens that on a hard drive, in addition to the standard partitions (C, D, E), there are several more.

This is due to the fact that when restoring the system, it was possible to restore the computer to its standard settings.

Some find a hidden size of up to 100 megabytes. The operating system itself is responsible for its creation. The section performs the function of system encryption.

There is a program in the section that can decode it.

But you should get rid of it. Before installing Windows, it is necessary to prepare the hard drive for the operation in advance. This can be done using the Acronis Disk program.

In the window that appears, click “Format”.

A warning will pop up that all data will be destroyed, but now it doesn’t matter, because we have a backup copy of all data. Click "OK".

When formatting occurs, feel free to click next.

The installation will take some time. After it, a window will pop up in which the user will be required to enter names: his own and the computer’s.

If you wish, you can create a password. In order not to forget it, you will be asked to come up with a hint for it.

Choose a security mode, date and time.

With the network card driver installed, you must select the type of connection.

You can install the drivers and programs you need

To ensure that, after installing Windows, the laptop boots from the hard drive and not the flash drive at startup, you should return the UEFI settings to their original state.

This completes the installation of Windows 7 on a laptop!

As you can see, there is nothing complicated about installing an operating system from a flash drive. The main thing is to carefully follow the listed points, and you will succeed.

Once is enough to remember the whole process.

The next time you need to install an operating system from a Flash card, you will do it automatically.

Video instructions on how to install WINDOWS 7 from a flash drive to a laptop using a DELL beech as an example

Installing Windows 7 from a USB flash drive to a laptop: A guide to action