How to clean your computer from junk without programs. System: unnecessary services

All people who have a computer are faced with a problem, the essence of which is the PC “freezes” and “logs”. To prevent this from happening, you should regularly clean your computer of unnecessary file elements.

Why clean up?

Filling up computer memory is a problem that almost every person who has a PC faces, and it doesn’t matter whether it’s at home or at work. And the main question in this matter is how to clean unnecessary files on the computer without harm to it software.

PC memory begins to fill up too quickly when the user very often installs and then deletes programs from his computer. personal computer. Filling the system hard drives This causes the entire PC to slow down, various software to open slowly, and games to have a sluggish interface.

It is also a signal that hard memory PC disk is full, a constantly pop-up window will appear with a message stating that the memory is full and you need to free up space on system disk. If this window repeatedly pops up for you, then you should start quickly taking steps to clear up free space on your existing personal computer.

The positive aspects of getting rid of unnecessary file elements:

1. increase free memory personal computer;
2. all kinds of programs will open twice as fast;
3. turning your PC on and off will take only a few seconds;
4. PC operation will speed up significantly;
5. The risk of errors in operation on the system disk is reduced.

PC cleaning without utilities

Clearing your computer of unnecessary files is possible even for a person who is not fluent in computers. People who are just starting to work with a computer do not want to resort to the help of various tools when cleaning their PC.

Since this is a very long and painstaking work that requires special attention. But often there is not enough time, and you want everything to clear itself.

Video: Ways to clean your computer

Windows Cleanup Wizard

Master Windows cleaning is software that is installed on every computer, regardless of the software version, the task of which is to remove temporary and unused file elements from the system disk.

This program is chosen by thousands of users who are concerned about the condition of their PC.

Windows Cleanup Wizard can remove all unnecessary and unused by the system files quickly and efficiently.

Working with this wizard is very easy and understandable.

Simple interface and easy handling are the main plus this software. Windows Cleanup Wizard is standard program, that is, it is already on the computer after Windows installations different version. And it's the same positive side of this program.

To get started with removing unnecessary file items, you will need to take the following steps:

Removing unused programs

On every computer, there are software that are never used at all. And they are the ones who fill the space in memory. And along with the memory filling, problems begin to appear, problems with the operation of your PC.

If you delete a program manually, then after a while the PC memory will inevitably fill up. Since when you uninstall software, you only remove part of electronic documents, of which it consists. After its removal, most of these file elements remain.

To remove the software you will need to take the following steps:

Temporary files

Temporary files are electronic documents that are created during installation various programs, as well as during their operation.

In general, these file elements should be created temporarily and deleted automatically after the program is uninstalled. But it doesn't always happen this way. And often the opposite is true. Therefore, it is recommended to regularly clean your personal computer of unnecessary files.

You need to delete temporary file elements:

Many programs can clean a personal computer, for example, TuneUp Utilities, CCleaner, nCleaner second, Glary Utilities, AusLogics BoostSpeed, Revo Uninstaller,Advanced SystemCare Pro. But the undoubted leader among all existing programs is CCleaner, and the number of its downloads has long exceeded a thousand.

Personal files

But the memory on computers is filled not only with temporary or residual files, but also personal files. Almost all programmers recommend storing personal files not on the system drive (C), but on the personal drive (D). Or even create compressed archives, and this is where you store your personal files.
Also knowledgeable people recommend storing various videos, films and music on external media(for example, on a flash drive or CD).

After all, it is by using this method storing your personal files, You can protect your personal computer from completely filling up the memory, both on the system disk and on the personal disk, and this leads to slow operation of the PC.

Video: fighting unnecessary files on the disk

How to clean your computer of unnecessary files with CCleaner

The program is designed to free up free space on your computer and delete unused electronic documents by the operating system. This program can be downloaded from the Internet absolutely free. It also deletes everything unused files from your computer correctly, and without harm to your PC.

Pros of the CCleaner program:

• works with both 32 and 64-bit operating systems;
• cleans your personal computer quickly and efficiently from temporary, unused and unnecessary files;
• deletes all files independently and without your intervention;
• it can be downloaded for free from the Internet;
• relatively light weight;
• enough easy installation programs.

Now let’s talk about how to clean up unnecessary files from using CCleaner by stages:

You will see the result of clearing your PC memory of unused file elements immediately and immediately. Main and positive result cleansing is the availability of free space on the PC. In second place is the normalization of your PC. And never forget the main rule: Clean your computer from unused file elements at least once every 2 weeks!

Each one accumulates as it works large number garbage. This includes tmp directory files, registry entries created by programs but not used, logs, logs. All this helps reduce the speed of the computer. This article will provide information on how to speed up application response times and make working with the OS more comfortable.

If you do not do these steps regularly, the opening speed will slow down. context menus, folders, launching programs. Free space on the hard drive will decrease all the time, which will lead to freezes or even the inability to load the operating system.

Windows built-in tools

The story about programs that can clean your computer should begin with the built-in utility. It works less efficiently than third-party products. It is worth paying attention to for users who rarely work on a computer, as well as those who do not have the rights or ability to install software. The default utility is included in all modern versions Windows. To run it on any OS, just enter the line “cleanmgr” in the input field of the “Run” window. Now all that remains is to click on “OK”. The main utility window will appear on the display. It needs to indicate which partition the program will continue to work with.

HDD analysis will continue for several minutes. Its speed is affected hard size disk, defragmentation percentage, time elapsed since last launch similar operation. When the scan is finished, the utility will provide a superficial report and prompt you to select groups of files to delete. Next to each item there is a checkbox, and opposite it is written the number of megabytes of information occupied.

To check the boxes next to the names of all groups. Click "OK" and confirm your intention. To delete more unnecessary information from HDD partitions in the main window of the utility you need to click on the “Clean up system files” button. Using the approach described above, you will have to spend no more than 10 minutes to complete all the steps. As stated earlier, standard means Windows are ineffective, which means that during the scan the utility did not find all the garbage.

Third Party Products

One of the most popular programs to optimize PC performance - CCleaner. Many users prefer it, as you can use this tool literally in a couple of clicks. The application interface is as simple and clear as possible, so even an inexperienced user will not need to study the reference manual.

Installation

CCleaner - absolutely free product, so you should download it only from official resource. In addition to the opportunity to get latest version utilities, you will know for sure that you will not infect your PC with a virus. The program requires installation before cleaning the computer. Windows will warn the user about the danger after launching the installer executable files, downloaded from the world wide web. Do the following:

1. Select "Yes".
2. A window will appear on the display. In it you need to select the language that is preferable to use in the interface.
3. After clicking on "Next" the user will be able to pre-setting. All parameters will be clear to any user who has at least once installed programs in Windows.
4. Now all that remains is to click on “Install” and wait for the process to complete. Installation is quick. It will take one or two minutes.

How to clean up your computer: deleting temporary documents

In the main window of the program there is the inscription “Cleaning”. After clicking on it, the utility will perform an analysis, the function of which is similar to that organized in the built-in tool. The columns on the left indicate the names of groups of files that will subsequently be deleted. Some of them are checked by default. Check the boxes next to unnecessary files. Click on "Analysis" and wait while the application collects data. The completion time of a function is affected by the amount of garbage on the system.

After scanning, a window will appear on the screen with detailed report. In it you can view the location of all documents being deleted and the amount of data being freed. To clean your computer, click on the appropriate button. Important for work operating system files will not be deleted. However, if you don't want to get rid of your browser history or logs Windows errors, it is worthwhile to first study the report and carefully review the names of the groups marked with flags.

System registry

In general, the speed of a computer depends little on the garbage in the registry. However, disorder in it negatively affects stability specific programs. Partitions and records should be cleaned when utilities that were functioning normally suddenly began to fail. If it is impossible to install new applications due to errors during the installation process, it makes sense to optimize the registry:

• Click on the icon labeled “Registry” in the left block of the program.
• Without unchecking the boxes, click on “Search”.
• The utility will begin scanning, which will last several minutes.
• Once completed, click on “Fix”.
• CCleaner will offer to create a backup copy of the data, which it will later erase.
• After selection, a window with detailed information about deleted sections and keys. There is a “Fix” button in it, which you should click on.

Service

Section "Service" CCleaner utilities provides the user with several tools for manipulating operating system settings, installed applications, hard disk partitions. The main features of this section that are worth paying attention to are programs and management of startup entries.

It includes those applications that run either with Windows or after the user logs in. Startup should be cleared of unnecessary or rarely used programs. It is unlikely that you will be able to speed up your computer using this method, but the OS boot time will be noticeably reduced. The application uninstallation function is completely similar standard tool Windows. Advantages of CCleaner - greater visibility and quick access to functionality.

Revo Uninstaller

Revo Uninstaller is different from most programs aimed at removing junk from Computer HDD. If the majority of utilities erase already accumulated data, then Revo Uninstaller fights one of the reasons for PC clutter - improper deletion BY. During its operation, the application monitors the activity of programs, remembers which files were created after each specific one, and what data was written to the registry and changed in it.

When deleting a program help Revo Uninstaller, the user can be 100% sure that there is no garbage associated with it left on the computer. Utilities installed before being equipped with the application in question are also uninstalled without leaving any tails. This is possible thanks to the built-in complex analysis system. The user just needs to click on the “Uninstall” item, and after scanning, check all the inscriptions. Anyone who likes to fully control the operation of programs will be able to study the detailed report. It records all paths to files and registry settings that will be deleted.

Conclusion

Remember: cleaning your computer once is not enough. Windows of any version requires regular service. How more programs installed in the operating system, the more often work is performed on the PC, the less frequent maintenance should be.

Sooner or later, almost every computer owner asks himself the question: how to clean your computer from dust? Some people come to this idea on their own. And someone waits until, as they say, “the cancer on the mountain whistles.”

Often, users encounter problems with the unsatisfactory performance of their “iron friend”, which are not caused by an outdated processor, weak video card or insufficient RAM. There are often times when you sit down to play your favorite 3D shooter, and at the most inopportune moment the computer freezes, and on the screen at that second we contemplate a screenshot of an enemy bullet flying at you. 3-5 seconds pass - and you are already on the list of heroically killed.

Questions arise: why is this so? What's wrong with the computer? Should I contact a professional PC repair? After all, just yesterday I played the same game, and there were no interruptions in the system?! What's happened? Maybe the video card is damaged? Is the processor “tired”? Or maybe friends brought not only new movies on a flash drive, but also a couple of viruses?

So what happened to the computer?

And you start with different antivirus programs“gut” your computer for “disease-causing” Trojans, worms, etc. Also, using various utilities that optimize system operation, fix errors, clean the registry, etc.

Having cured all the viruses, corrected the errors, and with a feeling of fulfilling our duty to our computer, we download our favorite game again. And-and-and... after a couple of minutes of playing, out of anger we almost break the monitor with the mouse! Same thing again...

Now we are calling our friends and waiting for an answer from them about who is to blame and what to do about it. And then one of them, jokingly or seriously, suggested cleaning the computer from dust. And you, in the absence of other options for solving the problem, pick up a brush and a vacuum cleaner, 15 minutes of simple manipulations and BINGO!!! We turn on the computer, and it’s like he’s been born again.

Dust is the main enemy of the computer!

Today you can hardly find a family that does not have a single computer in their home. But over time, unnecessary files accumulate on it. They remain after installing various programs and applications, or dust that accumulates inside system unit, settling on hard drives, video card, motherboard.

In addition, dust envelops wires (loops), fans and radiators, thereby interfering with their cooling and increasing the fire hazard. In this case, the processor temperature can reach 90°C when it is normal temperature varies from 30 to 60°C, depending on the model of the processor itself.

Immediately before cleaning your PC from dust, you need to check the temperature of your processor, chipset, hard drive and video card. After cleaning your computer from dust, you will notice a significant decrease in temperature. This point is very important, because in the absence of the necessary cooling, your computer will often automatically reboot or not turn on at all.

So, we clean the computer from dust, and what is needed for this?

• Vacuum cleaner (if you don’t have one, ask your neighbors)
• Screwdriver (phillips)
• Brush (it is better to take one with soft bristles)
• Simple pencil
• Eraser
• Two skillful hands
• Accuracy
• Upon request - rubber gloves

Cleaning your computer from dust. Stages.

Stage one. Preparing for cleaning

1. Disconnect the computer from the network (take out the plug from the socket).

2. Disconnect all components from the system unit ( external modem, printer, sound system etc.) By the way, in order to avoid later problems with reverse connection all these “devices” to the computer, you should remember how everything was originally connected, label the wires or take a photograph.

3. It should be noted that in the hole into which the mains plug is connected, a small amount of static voltage. It can be removed by simply touching three fingers open contacts. It may give a slight electric shock, but it is not painful, much less fatal (after all, you have already turned off the power from the network).

4. Next, you should unscrew the bolts from the back that hold the side wall of the system unit. After unscrewing the bolts, remove the cover. It is important here not to mix up the covers, otherwise if you remove the one on the side where the motherboard is attached, in this case you will definitely not clean anything. If you look from the front, you need to unscrew left side system specialist

5. Place the bolts in a jar or any other place where you will not forget that this is where you put the bolts. Those who have a case with latches can skip this step.

6. Place the system unit on right side, so that the motherboard faces us. You can clean your computer from dust while standing, but when the system unit is lying down, it’s much more convenient.

7. Removes RAM from the system unit. And don’t forget to remove the latches at the ends of the board. There may be one or two.

9. In addition, your system unit may also contain sound card, modem, etc. Most often they are located under the video card - we take them out too.

10. After the above mentioned manipulations, turn off hard drive(hard drive) and disk drive.

11. Place all the parts that you removed carefully on the floor, preferably in the order in which you took them out. Knowing the order, it will be more convenient for you to install them backwards.

Stage two. Cleaning your computer from dust

1. Take the vacuum cleaner, plug it into a power outlet, remove the tube and nozzle so that you only hold the hose with the handle in your hands. Some vacuum cleaners have special small plastic attachments, we can use them.

2. Take the brush in your second hand and press the “Start” button. Not on a computer, but on a vacuum cleaner!

3. Next, slowly but surely, and most importantly, thoroughly clean the motherboard and system unit with a brush. At the same time, we hold the vacuum cleaner tube five centimeters from the place where we clean with a brush. So, all the dust that is raised by the brush will be sucked into the vacuum cleaner - this is one of the most important points in cleaning your computer from dust.

4. You should also pay attention to cleaning the coolers themselves from dust and dirt due to the fact that the bulk of the dust collects there. In this case, the vacuum cleaner tube must be inserted close to the cooler, then it begins to spin, and the dust located there is sucked out from there. There is a grill on top, and we don’t have to worry that cleaning the dust will damage one of its blades.

5. ATTENTION! You should be careful when holding the vacuum cleaner tube near motherboards, since you may not be able to hold the tube and it will stick to the board. Of course, components motherboard the tube will not get sucked in, but it may cause a slight blow. Even such a blow can cause damage to the fragile circuit board. You should be careful with this. Do not bring the vacuum cleaner tube too close.

7. After this, we begin drawing, where the very simple pencil from your arsenal will be used. You will need it for the following: the point here is that the contacts - those sections of the boards that are directly inserted into the connectors of the motherboard, sometimes tend to oxidize, as a result of which the board is unstable, and sometimes stops working altogether. Such cases are not uncommon when neither the RAM nor the video card works. There is nothing terrible about this; you need to clean it as carefully as possible from dust.

Let's get back to drawing. We take the board in our hands and, as gently as possible, sketch out the contacts (edges) on both sides with a simple pencil. Be sure to be gentle and careful. It’s as if you were given an engraving by a famous Italian Renaissance artist for restoration. This simple procedure allows you to get rid of oxide on the contacts.

8. Then we take an eraser and again gently and carefully erase what we have drawn. In this case, you should not press hard with the eraser so that there is no rubber left on the contacts. If it still remains, you can simply wipe it off with clean hands.

That’s it, now at this simple stage, cleaning your computer from dust is completed, and you can now proceed to the next steps.

Stage three. Reassembling the computer after cleaning it from dust

After we have cleaned the computer from dust, we assemble our clean system unit into a single whole. In this case, we do everything as during disassembly, only in the reverse order. All components are connected to the system unit. You should assemble very carefully, so that everything is installed in its place and in its connectors. In this case, your hands should be clean or wearing gloves.

We click on the “Start” button, now of the computer, and rejoice. After all, cleaning the system side from dust is finally completed.

• It is not advisable to place the system unit against the wall itself. 5 centimeters from the wall will be enough. This is necessary for normal ventilation and to prevent the processor from overheating.
• When you next do wet cleaning in a room, you should definitely wipe behind the system unit, as a lot of dust collects there. Moreover, systematic wet cleaning behind the system unit reduces the accumulation of dust inside it.
• Cleaning your computer from dust should be done at least once every six months.

To summarize, let us remember that ordinary dust can cause serious malfunctions during computer operation. It collects inside the system unit, which all leads to your computer starting to freeze, slow down, various kinds of errors appear, and so on. Often accumulated dust even leads to sudden shutdown computer.

In this article, we told you how to clean your computer from dust, and what you need to have and be able to do for this, and also showed what steps it takes to clean your computer from dust and dirt.

If you have any difficulties cleaning your computer from dust, you can always contact the center computer help website. Our service technicians will thoroughly and professionally clean your system unit from dust and give valuable recommendations on how to protect your computer from dust in the future.

Call a specialist

Users of personal computers must ensure that their device is in good working order. This includes cleaning your PC from viruses, unnecessary programs, component testing and much more. In this article you will learn how to clean your computer so it doesn't slow down.

All causes of brakes can be divided into software and hardware. In the first case, the user can fix the problem manually and using special programs. If the hardware malfunctions, it will not be possible to eliminate the cause of the slowdown without special knowledge in this area. We'll sort it out software reasons and ways to eliminate them.

Setting up autoload

If you often install programs and applications on your laptop or PC, they may be added to the default startup folder. Some of them greatly affect the operating system startup speed, while others noticeably slow down the operation of the device. You can track the entire list of programs in startup as follows:

1. First you need to launch the Task Manager. The easiest way is to use hot Ctrl keys+Shift + Esc.

1. Now you need to open the “Startup” tab. Here is the list we need.

1. Pay attention to the columns “Status” and “Impact on startup”. From the first you can find out whether the program is enabled or disabled. The second column displays the degree of influence on turning on the computer.

1. You need to select those applications that most affect the PC boot speed. You need to close them yourself. To do this, right-click on the line with the program and click “Disable”.

Now unnecessary applications won't interfere fast loading operating system. The same procedure can be done via CCleaner program about which we'll talk further.

How to clean your PC using CCleaner

This utility allows you to clean your computer from temporary files, cache and registry errors. It can also be used to delete installed software and configure autoloading. Let's look at all the functions in order. First you need to install CCleaner:

1. Open the official website to download the free installer. The program is compatible with Windows XP, Windows 7, Windows 8 and 10.

1. Run the downloaded file and click on “Install”.

1. After quick installation, click on “Run CCleaner”.

1. In the first section, “Cleaning,” the utility allows you to delete temporary files, browsing history, browser cache and other garbage. Before starting, you must close the browser. To start the procedure, click on “Analysis”.

1. After scanning the system, information about the files to be deleted will appear. Now click on Cleanup.

1. Go to the “Registry” tab. This function allows you to clear registry keys of errors and conflicts. Click on "Search for Problems".

1. After collecting information about the problems, click “Fix Selected.”

1. You can do backups changed data.

1. To start, click on “Fix marked”.

1. Next comes the “Service” tab. Here are tools for uninstalling programs, setting up startup, browser extensions, etc. If you are going to clean your PC from unnecessary programs and files manually, then CCleaner will be an excellent alternative to the standard ones. Windows tools to remove software.

1. The Startup tab provides an alternative to the standard functionality of the Task Manager. Here you can not only completely remove applications from autorun, but also temporarily disable them. You can also configure tasks and context menus to launch when you turn on your PC.

CCleaner is one of the few programs with such extensive functionality that can be downloaded for free in Russian. In order for the utility to monitor the cleanliness of the system in background, do the following:

1. Go to the "Settings" section. Check the box marked.

1. Ready! Now the utility will clean your PC every time you turn it on. You don't have to do the operation manually.

Virus cleaning

The next reason for slowdowns is malware infection. For cleaning, it is recommended to use third-party antivirus software rather than standard Defender Windows.

If your antivirus cannot cope with the treatment, then you can use one of the special one-time utilities. It will scan and cure your system once, but will not be a permanent protector. Let's figure out how to properly scan your computer using Dr. Web Cureit:

1. Open the link and download the program. The distribution will weigh about 160 MB.

1. The utility does not require installation. Run the downloaded file and click on the “Start scanning” button.

1. Wait until Dr. Web Cureit will completely scan your system for threats.

1. Now click on the “Disarm” button and close the utility.

Clearing the browser cache

1. Launch the browser and hold down the Ctrl + H keys. This tab can also be opened through the side menu.

1. Select “Clear history” from the menu.

1. Select the “All time” time range and click on the “Delete data” button.

If you don't want to use third party software to clean your PC, then use standard functionality Windows.

Uninstalling programs

If you do not work with CCleaner functionality, then remove it unnecessary applications You can use the operating system tools:

1. IN search bar On the taskbar, enter the query “Uninstall”.

1. Find unnecessary software in the list and click “Delete”.

The interface differs slightly depending on Windows versions, but all the names and programs are the same.

Disk cleanup and defragmentation

Let's figure out how to clean up the disk using standard OS tools:

1. Through Explorer, go to the “Computer” section, click on the desired hard drive RMB and select “Properties”.

1. In the “General” tab, click on the marked button.

1. Mark unnecessary files and click OK.

1. Confirm deletion.

1. Now in properties, open the “Tools” tab and select “Optimize”.

1. Select the hard drive partition and click “Optimize”.

1. After analysis file system the program will determine whether it needs hard section disk in optimization, and will start it if necessary.

Manually deleting temporary files

All temporary files are stored in Temp folder. You can access it as follows:

1. Launch the Run window (Win + R) and enter the command:

%TEMP%

1. Before manual removal carefully review the list of files and folders. You may need some of them for work or games (saves, configuration files, etc.). The rest can be safely deleted.

Disabling effects

If the brakes appear due to weak PC hardware, then disabling the situation will significantly improve the situation. visual effects. This is especially true for modern Windows 8 and 10. Using the presented guide, you can disable unnecessary effects:

1. Open Control Panel and go to System and Security.

1. Now click on “System”.

1. Open the menu " Additional options systems."

1. In the “Advanced” tab, click on the marked button.

1. Set the option to "Provide best performance" and save the changes.

Disabling services

This point concerns the operating room Windows systems 10, which has many services running by default. All of them significantly load the processor and RAM, so some of them need to be disabled. You can do it like this:

1. Launch the Services application. To do this, enter the command in the “Run” window:

services.msc

1. The first service is Windows Search, which scans and indexes files for search in the background. Find the line of the same name in the list and double-click on it. In the window that opens, select the startup type “Disabled” and apply the changes.

1. The second service is Superfetch. With its help, the OS monitors frequently used applications and preloads them into RAM. To reduce the load on your PC, try disabling this service in the same way.

Prevention

Besides software problems, the reason why the PC slows down is hardware faults. One of these is dust contamination. The user must ensure cleanliness inside the system unit. The main sign of contamination is an increase in the temperature of the processor, video card and other components. You can track metrics using special utilities.

One such program is HWMonitor. Through it you can monitor the temperature of all components. For example, the screenshot shows the temperature of each processor core:

Conclusion

We have reviewed all sorts of ways speeding up the operation of a personal computer. By using manual cleaning and special utilities you can get rid of most of the causes of brakes.

Video

Check out the video with detailed description all actions from the instructions. You can complete all the steps while watching the video.

When using a computer, many temporary files are created in the system. One part is deleted after closing programs and rebooting the PC, while the other remains a dead weight on the hard drive.

If you don't clean it regularly, files will accumulate and take up unnecessary storage space. But this is not the worst thing - they can cause your PC to freeze.

The short answer is yes! Cleaning your computer of debris should be done regularly so that the system does not slow down. This does not mean that you need to check every day. 1-2 scans per month should be sufficient.

What to use to clean the operating system (OS)?

There are two types of programs - for comprehensive cleaning and to clean the system registry. Most applications are distributed free of charge, so they are always available to users. Let's look at the best services.

Programs for comprehensive OS cleaning

First, let's look at 3 applications for comprehensive cleaning Windows.

This utility is designed to improve the performance and speed up of your computer. Possibility of optimization RAM, and also game mode « Turbo Boost» , which will be of particular interest to gamers.

First you need to download the program from the official website of the developers - iobit.com. Click on green button "Download" and install « Advanced System Care» .

Before installation, be sure to uncheck the “Install for free” option. Driver Booster“We don’t need this software. The application will ask you to enter your email to receive newsletters from developers with various bonuses.

The first window will offer scanning options. Select one, several or all items with a checkmark and click “Start”.

Next, the device will be checked, after which the results will be displayed on the screen. The user will be shown in detail each problem found. If you don’t understand this, click “Fix” without changing any items.

After this, unnecessary and problematic files will be cleaned. For best results, it is recommended to restart your computer.

One of the most functional programs. can clean the system registry, defragment the disk, create backups, search for and remove duplicates and malware, optimize RAM and much more.

First you need to download and install the utility from the official website glarysoft.com. Next, launch the application in any way. A window will immediately open with all the options.

The easiest way to start a scan is to click on the button "1-click", which is located at the top center. After this, a window of suggested points for examination will open.

Click on the green button "Find problems" and wait to receive the results. On home screen All detected problems will be displayed. Click "To correct".

Additionally, it should be noted that the utility copes with its task very quickly and gives recommendations for updating other important programs.

This application specializes in full optimization operation of Windows OS. This is a kind of assistant that will not only rid the storage of temporary files, but also help with updating installed utilities and drivers.

First you need to download and install . On the official website systweak.com it is paid, so if you don’t want to spend money, you can download the “cracked” version from a third-party resource.

It includes more than 30 tools for configuration, optimization and Windows protection. To clean the system of debris, you need to go to the section "Intelligent Maintenance", after which you will need to tick the required items.

In the lower right corner click on the blue button "Start Scan". The examination results will be displayed on the main screen, where the button will be available "To correct".

Also offers optimization hard drive, RAM, set up game mode and secure your device. Availability huge amount useful utilities allows the application to handle most tasks.

Programs for cleaning the system registry

IN system registry important for Windows information. The slightest changes, even changing the background on the desktop, are made to it. But over time, unnecessary, outdated junk accumulates there, causing the computer to freeze. Let's look at utilities for cleaning the system registry.

Auslogics Registry Cleaner

The download is available on the official website of the developer. "Auslogics Registry Cleaner» allows the user to first scan the registry for errors, and then manually select what should be deleted.

Button "Scan" available immediately after launching the utility.

After the detected problems and risk level are displayed, the user must check the box to select which ones should be fixed. It is important to be careful here, since deleting important system file may cause failure Windows operation. Click "Repair" and automatic cleaning will occur.

"Auslogics Registry Cleaner" creates backup points before making any changes. This will allow you to quickly restore your computer in case of problems.

You should also be careful when installing this program and uncheck unnecessary boxes - third-party software is often downloaded along with it.

Available for download on the official website of the developers - vitsoft.net.

The utility consists of four components:

• system registry optimizer;
• trash cleaning apps;
• startup manager;
• uninstaller.

The installation is no different from previous programs. After launching, select the item in the main menu "Scan".

A list of detected problems will be displayed. You can check off what you want to delete, after which you will need to click on the trash can icon.

If something goes wrong and a system failure is noticed, it is recommended to use a backup copy.

To do this, go to the appropriate section and click "Restore".

Bottom line

In order for your computer to please you with performance and quality of work, you need to periodically clean the registry. To be 100% sure that deletion will not cause any harm, you should have a little advanced understanding of how your computer works. When using such software, be sure to make backup copies. If something went wrong, be sure to write in the comments and we will provide you with all possible help!