• home
  •  > 
  • Internet
  •  > 
  • How to access the tp link page. How to log into a TP-Link router? Connecting and setting up a TP-Link router

How to access the tp link page. How to log into a TP-Link router? Connecting and setting up a TP-Link router

Router TP-Link TL-WR841N is one of the most popular models routers, which has proven itself to be the best and, as a result, is in consistently high demand among many users. In this article we will consider in detail the procedure for connecting and setting up a router, including a detailed description of configuration wireless wifi networks.

Brief specifications of TP-Link TL-WR841N

Characteristic Meaning
Type Wi-Fi router
Wireless standard IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Frequency range 2400-2483.5 MHz
Max. wireless connection speed 300 Mbit/s
Antenna 2 x 5 dBi
Wireless Signal Strength 20 dBm
Protection wireless network WEP/WPA/WPA2, WPA-PSK/WPA2-PSK
Ports 4xLAN 100 Mbit/s, 1xWAN 100 Mbit/s
Passing VPN traffic PPTP, L2TP, IPSec (ESP Head)
DHCP server There is
Dynamic DNS DynDns, Comexe, NO-IP
Firewall There is
NAT There is
QoS (data prioritization) WMM, Bandwidth Control
WDS Bridge There is
Dimensions (WxLxH) 192 x 130 x 33 mm

How to connect a router

The router package includes:

  • Router TL-WR841N;
  • Power adapter;
  • Ethernet cable with RJ-45 connectors;
  • CD for quick setup;
  • Management.

We unpack the box and proceed to installing and connecting the router. First, connect the device to power using the adapter and click on Power button on the rear panel (if the indicators on the router light up on their own after power is applied, then you do not need to press the button).

Next, using the included Ethernet cable connect the router and computer. We plug one end of the cable into one of the four yellow LAN ports of the router, and the other into the connector network card PC. Then we connect the cable coming from the Internet provider or ADSL modem to the blue WAN connector of the router.

In principle, that’s all, now you can proceed directly to setting up the router, but first let’s make a reservation that it comes with a CD with a utility that allows you to quickly configure the router in step by step mode. We will not consider this method, because the configuration option via the web interface is more preferable.

Basic setup of the TP-Link TL-WR841N router

Since the router will now be responsible for connecting to the Internet and distributing it, the need for the previously created in Windows high speed connection No. At the same time, connection via local network, which connects your computer and router, needs configuration. Let's go to Control Panel - Network and Sharing Center shared access- Change adapter settings. Click right click mouse by active connection and select “Properties”.

On the “Network” tab, set the switches to “Obtain an IP address automatically” and “Obtain a DNS server address automatically.”

We also set the switch on the “Alternative configuration” tab to the automatic configuration position. Save the changes with the “OK” button.

Now we launch any browser and in address bar we register http://tplinklogin.net/ or 192.168.0.1 . Then in the window that opens, enter the username and password - by default this is admin And admin.

The standard username and password are indicated on the label on the bottom of the router. Look at it and make sure once again that all login information for the web interface TP-Link settings TL-WR841N entered correctly.

If everything is done correctly, you will be taken to the administration panel. Here we immediately go to the Internet settings.

Internet setup (WAN)

Select “Network” from the menu on the left (in the English interface – Network), and then the WAN section. In the “WAN Connection Type” drop-down list, select desired type connection to the provider.

The following options exist:

  • Dynamic IP address;
  • Static IP address;
  • PPPoE;
  • L2TP;
  • PPTP.

There is no point in delving into the essence of all these types of connections. Information on which one to choose is provided by the provider. The Internet service provider also transfers authorization data to the client - username and password. If you suddenly forgot this data, you can look it up in the contract. The second option is to call the provider's support service.

So, let's set it up WAN connection according to the following schemes:

  • When choosing dynamic IP address no additional actions no need to produce;
  • Option Static IP address requires entering the IP address, subnet mask, gateway and DNS. We remind you that all this data is provided by the service provider, i.e. your provider.
  • Connection type PPPoE requires entering a username and password.
  • When selecting a connection L2TP indicate the username, password and IP address/VPN server name.
  • Connection type PPTP will also require you to enter your username, password and IP address/VPN server name.

After all the data has been entered, click the “Save” button. The Internet should work.

After setting up the Wi-Fi router TP-Link TL-WR841N there is no Internet access

If you have configured everything exactly according to the instructions, but as a result the Internet does not work, you need to do the following:


If none of the above steps help, the router may be faulty. To make sure the device is working, try connecting it with friends or acquaintances.

Wi-Fi setup

Providing the opportunity to wired connection to the Internet - one of essential functions router. Let's move on to the Wi-Fi settings for TP-Link TL-WR841N.

Go to the section Wireless Mode - Settings wireless mode (Wireless – Wireless Settings). Set the name of our Wi-Fi network and select the region.

Below are network settings that may affect signal quality and coverage in certain situations. We will not focus on them, since this is a topic for a separate large conversation. Leave all settings at their default values ​​and save your settings.

Now we need to protect our wireless network from unauthorized connections of third-party users. Select “Wireless Security” on the left.

Set the switch to the “WPA/WPA2 - Personal (recommended)” position. Next, select the version, encryption type and set a password. We save the changes made.

Setting a new administrator password

The standard username and password for accessing administrative settings make your TP-Link TL-WR841N router very vulnerable, so it is better to change them immediately. Let's move along the path System Tools - Password (System Tools - Password). Here we enter the old and new authorization data (you can only change the password and leave the username as admin), and then click “Save”.

You can write down your password somewhere so you don’t forget it.

Perhaps this is it basic setup WiFi TP-Link router TL-WR841N is complete. Of course, there are still a lot of different functions that can be useful to users. However, this will be a more subtle configuration that requires a separate article. We achieved the main goal - we set up the Internet and Wi-Fi.

For all settings to take effect, reboot the router. It can be done programmatically through section ( System Tools - Reboot) or physically by turning off the power. After loading, a Wi-Fi network should appear with given name, to connect to which you will need to enter a password. The Internet must work in both wired and wireless mode.

You are trying to enter the setup menu of a router, modem or optical ONT terminal via http://192.168.1.1 and “ Personal Area» device does not open for you. What to do? Call a specialist and pay money? Take your time and don't get discouraged. Let's try to figure out the problem together and decide how to log into the router?!

I think it's useful to know a little theory first:
192.168.1.1 — this is the IP address (IP) of the network device. By default, the network is usually registered on routers: 192.168.1.0/24. In other words, the local network on the router is configured with the first (lowest) address in the subnet - 1, and clients connected via the local network will use addresses with 2 By 254 . In general, this is a generally accepted rule and is configured this way for the vast majority of network devices - Zyxel Keenetic, Lincsys, Cisco, TP-Link, Upvel, Sagemcom, Asus. There are, of course, exceptions. For example, at D-Link routers and Netgear uses a different subnet by default - 192.168.0.0/24 and accordingly the IP will be - . But, whatever one may say, the numbers are different, but the meaning is the same - that IP 192.168.1.1, that 192.168.0.1 is the address of a network device on the network. In our case -

How to log into the router

Now let's move on to practice. To go into the settings of a WiFi router or ADSL modem, you must enter the address in the browser: http://192.168.1.1. In this case, you do not need to type the protocol at the beginning - http:// or www - the browser itself will automatically enter the required one.

If you have access to the settings, you will see an authorization form on the device, where you will need to enter your login and password (usually to log into the router via 192.168.1.1 you use: admin / admin):

This means that the local network is configured, the router is accessible and there are no problems with accessing its settings. We will consider the worst case scenario - the browser displays the error “Page is unavailable” or “Unable to access the site”:

Web interface accessibility issues can vary. Let's look at the most common of them:

Instructions on how to log in to 192.168.1.1.

Step 1. Check the activity of the network connection.

Very often, the reason for the router’s inaccessibility is the network cable disconnected from it.

In this case, it is not necessary that someone pulled out the cable intentionally - the connector can simply move away from the connector network card per millimeter and nothing will work anymore. Be sure to check the integrity of the cable - it may be pinched somewhere or damaged by something. Please also note that the LAN cable must be connected to the LAN port of the device and not to the WAN port.

Otherwise, through WAN port, you won’t be able to access 192.168.1.1. This port is used to connect the provider cable. But only!

Step 2: Check the network indicators.

Here I mean the physical connection indicators both on the computer’s network card and on the router itself. What are they? Typically this is a green LED. If the network is active, the indicator lights up or blinks quickly. We take your device in our hands and look at the front panel. When turned on, the Power indicator must be lit - it means that the device is turned on. Then we look at the LAN port indicators - they are usually marked either simply with numbers - 1, 2, 3, 4.

When plugging the patch cord into the LAN port— the indicator with the corresponding port number should light up. If it does not light up, try disconnecting the network patch cord and plugging it into the adjacent connector. If the indicator does not light up there either, try everything one by one. Did not help? Then you have The router is faulty - take it to service.

Step 3: Check your network settings.

At this stage we need to check the settings network adapter- what IP is registered. To get into the network card settings on operating system Windows XP you need to click the Start button, select the partition Network connections. In Windows 7 and Windows 8, press the key combination Win+R. The Launch Program window will open. Here you need to type the phrase - control panel.

The Panel will open Windows management, where you need to find the “Network and Internet” section.

Click on it with the left mouse button. The following window will open:

Now, to open the router’s personal account via 192.168.1.1, click on the “Network and Sharing Center” link:

Select the menu item “ Properties" . The Local Area Connections properties window will open:

Select “Internet Protocol Version 4 (TCP/IPv4)” and double-click on it with the left mouse button. In most cases, IP settings are set to automatic mode:

This is how the system was initially configured. This is done in order to facilitate the connection of the computer to the network. Thanks to this, if there is a DHCP server on the network, Windows will receive an IP address, mask, gateway address and DNS from it.
But what if there is no DHCP server on the network, or it is disabled in the configuration? In this case, login via 192.168.1.1 to your personal account on automatic settings will be unavailable, since the IP will be picked up from a special Microsoft subnet - 169.x.x.x. It goes without saying that with such an address you will not have access to the WiFi router address. Therefore, to enter its configurator, you need to register the IP manually - check the “Use the following IP address” checkbox and enter the addresses as in the picture:

That is, the following should be written:
IP address - 192.168.1.2
Mask - 255.255.255.0
Gateway - 192.168.1.1
Preferred DNS server - 192.168.1.1
Alternative DNS server - 8.8.8.8
Registered, click the “OK” button for the changes to take effect. We launch the browser again and try to go into the router settings at 192.168.1.1. The router’s personal account is still inaccessible?! Well, let's move on.

Step 4. Check the Web browser.

In the Control Panel, select the “Network and Internet” section :

Now you need to select “Internet Options” and open the “Connections” tab. Click the “Network Settings” button:

No Proxy servers should be registered.

Keep in mind that a web browser is also a program and may not work entirely correctly. Therefore, be sure to install another browser - Firefox, Opera or Chrome - and try to log into the router via 192.168.1.1 (Zyxel Keenetic, TP-Link, ASUS, etc.).

Step 5. The node can be blocked by the Security System.

It may happen that your modem or router becomes unavailable locally due to Not correct settings Windows Firewall or another firewall you have installed. To eliminate this we do this:
We completely disable (by stopping the service) the security system you have installed - antivirus, firewall, etc.
Also, to exclude all options, we try to disable the standard Windows Firewall. It can also block IP 192.168.1.1 or an entire subnet. Go to the Control Panel, select the “Windows Firewall” section and completely deactivate the packet filter by clicking on the “Turn off” value.

On Windows 7 and Windows 10 Toolbars We look for the “Security System” -> “Windows Firewall” section and select the “Turn Windows Firewall on or off” menu item.

We disable it completely for private and public networks.

Again we check access via 192.168.1.1 to the personal account of the modem or router.

If none of the above helped you, then only the following scenarios remain:

1 option- The IP address on the router has been changed. That is, it is not 192.168.1.1 that is used, but another IP - 192.168.0.1, 10.90.90.90, etc. In this case, all that remains is to reset the device configuration parameters using the “Reset” button on the back panel of the device and configure it again.

Option 2- viruses and malware. Nowadays there are a lot of different infections circulating on the Internet, including viruses for routers that change some of their settings, after which logging into the device’s web interface also becomes quite problematic. Start by checking your computer or laptop for viruses.

Option 3— check if you can access 192.168.1.1 from a phone or tablet by connecting to WiFi networks. The password for connecting to a wireless network is often written on a sticker glued to the bottom of the device. If not, then as an option you can try using WPS function. In this case, the PIN code will also be written on the sticker.

Option 4- Hardware failure of your modem or router. In this case, the only way out is to take it to a service center.

Video tutorial:

The router address 192.168.1.1 is available, but does not allow admin/admin

I think that to complete the picture, we need to consider another option: the router is accessible, but it is not possible to log in to http://192.168.1.1 - the password is not suitable - admin:

In this case, only 2 options are possible:
1 - Reset the settings with the “Reset” button, as described above, after which access to the modem settings should be possible without problems. But please note that after resetting the settings, the router will be pristine and will have to be completely configured from scratch.
2 - Look for the person who originally set up your device and ask for the password. If this was done by a master installer from the provider, then perhaps he installs the same thing on all devices. If the parameter settings were made by someone else, then he is unlikely to remember and will still have to use “Reset”.

The most popular devices using the address 192.168.1.1:

Zyxel equipment.

ADSL modems:

OMNI ADSL LAN EE, OMNI ADSL LAN EE, OMNI ADSL WLAN EE, P-660H EE, P-660HT EE, P-660HTW EE, P-660HW EE, P-660R EE, P-660RT EE, P-660RU EE, P-662H EE, P-662HW EE, P-741, P-791R v2, P-792H EE, P-792H v2, P-793H, P-793H v2, P-794M, P-841, P-844 EE , P-870H-51A V2, P-870HW-51, P-870HW-51A V2,
P-870MH-C1, P-871 EE, P-871M, P-872H, P-872HA, P660HN EE, P660HN Lite EE, P660HT2 EE, P660HT3 EE, P660HTN EE, P660HTW2 EE, P660RT2 EE, P660RT3 EE, P660RU2 EE , P660RU3EE

WiFi routers:

BG318S EE, NBG334W EE, NBG460N EE, P-330W EE, P-334 EE.Keenetic, Keenetic 4G, Keenetic 4G II, Keenetic Giga, Keenetic Giga II, Keenetic II, Keenetic Lite, Keenetic Lite II, Keenetic Omni, Keenetic Start, Keenetic Ultra.Keenetic 4G II, Keenetic Giga II, Keenetic II, Keenetic Lite II, Keenetic Omni, Keenetic Start, Keenetic Viva, Keenetic Extra, Keenetic Extra 2, Keenetic DSL.

(Second generation kineticists have the hostname my.keenetic.net)

D-Link equipment:

DSL-2640U B1A T3A, DSL-2640U BRU C, DSL-2640U BRU C2, DSL-2640U BRU CB, DSL-2640U BRU D, DSL-2640U RA U1A, DSL-2740U BRU C2, DSL-2750U B1A T2A

Tp-Link equipment

The configuration interface for devices from this manufacturer looks like this:

ADSL modems:

TD-W8901N, TD-W8950ND, TD-W8951NB, TD-W8951ND, TD-W8960N, TD-W8961NB, TD-W8961ND, TD-W8968, TD-W8970

Wi-Fi routers:

TL-WA701ND, TL-WA730RE, TL-WA750RE, TL-WN7200ND, TL-WN721N, TL-WN721NC, TL-WN722N, TL-WN722NC, TL-WN723N, TL-WN725N, TL-WN727N, TL-WN751N, TL- WN751ND, TL-WN781ND, TL-WR702N, TL-WR720N, TL-WR740N, TL-WR741ND, TL-WR743ND, TL-WA830RE, TL-WA850RE, TL-WA901ND, TL-WN8200ND, TL-WN821N, TL-WN821NC, TL-WN822N, TL-WN823N, TL-WN851ND, TL-WN881ND, TL-WN951N, TL-WR1042ND, TL-WR1043ND, TL-WR841HP, TL-WR841N, TL-WR841ND, TL-WR842ND, TL-WR940N, TL- WR941ND, TL-WA5210G, TL-WA7510N, TL-WR743ND, TL-WR843ND, TL-WA5210G, TL-WN310G, Acher C2, Acher C7, Acher C9, Acher C20, Acher C50.

Domain names are also used: tplinklogin.net, tplinkwifi.net, tplinkmodem.net.

Asus equipment

Web interface of older routers:

The same is true for new versions of Asus routers with ASUSWRT firmware:

ADSL modems:

DSL-N13, DSL-N11, DSL-N10, DSL-N12U, DSL-X11, DSL-N55U, DSL-N10 B1, DSL-N12E, DSL-N10E, DSL-N12U B1, RT-N10P, RT-AC68U, WL-330gE, WL-330N3G, WL-330N, WL-330NUL

Wireless routers:

WL-520gU, WL-520gC, WL-500gP, V2RT-N15, RT-N11, RT-N13, RT-N16, RT-N13U, RT-N10, RT-N12, RT-N10 B1 (RT-N10+ B1) , RT-N56U, RT-G32 v.B1, RT-N66U, RT-N10U, RT-N13U B1, RT-N53, RT-N12LX, RT-N10LX, RT-N15U, RT-N12, C1RT-N10, RT -N65U, RT-N10E, RT-N12E, RT-AC66U, RT-AC56U, RT-N12HP, RT-N12 D1, RT-N10E B1, RT-N10+ D1, RT-N14U

Used Domain name- router.asus.com.

Netgear equipment

The interface of devices from this manufacturer looks like this:

ADSL modems:

D6300, D6200, DGND3700, DGND3300v2, JDGN1000

Netgear routers:

R6300, 6200, WNDR4700, WNDR4500, WNDR4500, WNDR4300, WNDR4000, WNDR3800, WNDRMACv2, WNR3500L, WNR3500Lv2, JNR321, WNR2200, JWNR2000, JWNR2000v2, 2, JNR1010, WNR612v3, WNR612v2.

TPLINKLOGIN.NET- This standard address, where the entrance to the TP-LINK router is located. To enter the control panel settings, use the login and password “admin-admin”. Login to your personal account TP-Link router You can also use its IP - 192.168.0.1 or in some models 192.168.1.1. But what if you open http://tplinklogin.net, an error occurs - how to solve it? Let's figure out together how to log into a TP-LINK router.

tplinklogin.net - login to the personal account of the TP-Link router at 192.168.0.1

This instruction connection is universal and suitable for setting up any TP-Link routers - TL-WR740N, TL-WR840N, TL-WR841N, etc.

Friends!
Read this important information- today login to your TP-Link router personal account at " tplinklogin.net» is no longer available due to simple carelessness - the company forgot to pay for the domain, and it went into other hands. The router's web interface is now located either at " tplinkwifi.net", or by IP "192.168.0.1". Login and password for connection remain the same - admin-admin

Let's start, as they say, “from the stove,” and today one of the most available routers TP-LINK TL-WR741N.


After this, most users open a browser and enter the address http://tplinklogin.net and in 50% of cases they receive one of following errors:



It would seem that the errors are different, but the essence is the same - it is impossible to access tplinkwifi.net.

How to configure a computer to log into the TP-Link router at TPLINKLOGIN.NET?

The whole point is in incorrectly set Windows settings connecting the PC network card to the router. Therefore, we go to the computer’s network connection settings using the following chain: Start - Control Panel - Network and Internet - Network and Sharing Center - Change adapter settings.

Right-click on “Local Area Connection” and open the “Properties - Internet Protocol Version 4” section


Here you need to set it to " Automatic receipt» checkmarks on the IP address and DNS servers— the router will give them to us automatically. Pay attention to the last point - in the event that certain public servers, for example, or 4.4.4.4, then you won’t be able to go to the address “tplinkwifi.net” or “tplinkmodem.net”. Another possible variant— write here, by default it looks like “192.168.0.1”

If you need, then the path to selecting a network adapter is slightly different - you need to right-click on “Start”, select “Network Connections” and then open the “Adapter Settings” section.


Save the parameters with the “OK” button.

TP-Link login error - 192.168.o.1/192.168.0.l/192.168.1.1

  • Another very popular mistake lies in the user’s carelessness when, instead of digital value“192.168.O.1” the letter “o” is entered in the address bar instead of “zero”. Of course, you won’t be able to access the control panel using an incorrect address.
  • The same applies when the letter “L” is written at the end instead of the number “1”
  • Finally, it is possible that the IP was simply chosen incorrectly - instead of 192.168.0.1 they indicate 192.168.1.1 and vice versa

How to log into your personal account on a TP-Link TPLINKLOGIN.NET router?

We get to the admin panel - there are many menu items for configuring the TP-LINK router, but the easiest way to start is with “Quick setup”.

First you need to select the type of your Internet connection. Rely on auto mode It’s not worth it - it’s better to find a paper contract for the provision of Internet access services and see there all the data necessary for connection. My Internet works in PPPoE mode - that’s what I’ll choose.


Next, set the TP-Link settings for wireless connections. On initial stage All you need to do is come up with your WiFi network name (SSID) and an 8-character password. Select “WPA2-Personal” as the encryption type. The rest can be left as default.

On last step reboot the router.

These steps are enough to log into your TP-Link router’s personal account via the web interface at tplinkwifi.net or 192.168.0.1 and configure it to work with the Internet. By the way, you can also use mobile app- a separate article is devoted to this. Start using it, and you can master the rest of the settings by reading other articles on our blog.
Good luck!

TP-LINK is one of the leading manufacturers network equipment. We will present detailed information, how to connect or reconfigure a TP-Link router. The procedure for connecting the device, setting up a wired and wireless network, changing the password and updating the firmware will be discussed. The information obtained will allow you to configure without any problems home network in TP-Link routers.

What data is needed to connect the router?

To change the parameters of the router itself, you will need two things: a browser and a password with an access login. The latest data can be found on the label attached to the device body. As a rule, the standard login and password are the English word admin.

To use the Internet you will also need authorization data, which you must obtain from your provider. However, they must be specified in the service agreement. You must enter them in the router or specialized program, if provided by the provider. Be sure to know the connection type (PPPoE, L2TP, PPTP and others) for proper configuration. When using a dynamic IP, you need to know your IP address, subnet mask and the like. If all these parameters are already in hand, you can connect to TP-Link.

How to connect a device to a network, PC or laptop

The procedure does not cause any great difficulties, and is performed for 5-10 minutes. Follow the steps in the following instructions one by one:


Models with Wi-Fi can be configured over the air. This is relevant if you are not able to connect the router to your computer via LAN. This completes the manipulation of the wires. The process then continues in the web interface.

Login to the web interface

Manipulations with the modem are performed only in the web interface. You can access it from your computer when connected network cable or via WiFi on wireless model. Attention! You can use the interface at any time, even when the Internet is down. To log in, follow the instructions below:

Router settings

Let's move on to the most interesting part - changing the router parameters. The main window contains more than 10 different sections. Most of them are not needed by the average user. Internet activation occurs in a maximum of two sections. Next, we will tell you in detail how to set up a TP-Link router, about creating a wired connection, setting up Wi-Fi, changing the login password and other useful things.

Connecting to a wired network

The router has a quick setup feature. Beginners are recommended to use this section. Click "Next" and follow the installer prompts:


When setting up other types of connections, fields for entering your login and password will appear. Here you need to enter the data provided by the provider. The user can change the settings in the “Network” section. In some TP Link models, next to the choice of connection type there is a “Define” button, which will help you find out your type. Based on the WAN, the corresponding characteristics are already configured.

For example, to use PPPoE, fields for login/password and parameters specific to PPPoE already appear in the window.

Connect via wireless network

For devices with a Wi-Fi module, you will also have to configure wireless connection. This can be done with quick setup(the penultimate paragraph requires the introduction of all important parameters).

Let's figure out what Wi-Fi settings the TP-Link router should be changed. Broadcasting should be set to “on”. The SSID or network name is what will appear on other devices when searching. Specify your region, mixed mode. Leave the channel and its width automatically. Advanced users can choose it themselves, taking into account occupied channels by neighboring routers. If you want to set a password for the access point, select the WPA2-PSK security type. Finally, all that remains is to enter the password for wireless point networks. Click the “Next” button and complete the process.

Similar settings are found in the “Wireless Mode” section. To change the SSID or channel parameters, select the “Wireless Settings” sub-item. You can change the password in the “Wireless Security” section. When making any changes, do not forget to click the “Save” button. If the selected settings have not changed, reboot the device.

Through these menu items, routers from the manufacturer TP-Link are configured.

Changing the password for logging into the web interface

All owners are recommended to change standard password and login from the router. This is due to the fact that an attacker, if the Wi-Fi password is missing or has been hacked, will be able to enter the modem settings and “have fun”. Eliminating the problems created will not be difficult, but it is better to avoid this. The interface allows you to quickly and conveniently change input data:


If you have forgotten your login information, perform a factory reset.

Advanced Settings

The router has a mass additional functions, which expand its capabilities. Consider some of the advanced settings:

  • Guest network. Allows you to configure public guest network, limit incoming/outgoing traffic or operating time.
  • Changing addressing. It allows you to set static IP addresses or use DHCP.
  • Forwarding – setting up virtual addresses, web telephony, conferences and the like.
  • Functions parental controls. Limiting Internet access time or specific resources.
  • Manually setting a routing table (for specialists).
  • Binding MAC addresses to specific IPs.

You can find out more about how to configure specific functions of your TP-Link router in the instruction manual.

VPN

This technology allows you to hide information from prying eyes. Encryption is performed, so even your provider will not be able to track your visits. However, only those models that have a pre-installed VPN server can use VPN. You can perform the setup using the following steps (for English firmware).

Manufacturer of dispensing devices wireless internet TP Link is available in full the lineup, from which you can select devices according to your preferences and budget. Despite the fact that all models have their own distinctive features, the connection sequences and Internet settings for the TP Link router are very similar. Next you will get acquainted with the detailed step by step instructions on connecting and setting parameters to obtain a stable Internet and Wi-Fi network.

Stages of work

First, let's make a list of procedures that you need to carry out:

  • connect the device to personal computer or laptop;
  • connect the internet cable;
  • enter the provider settings;
  • set up a wireless network.

You can read in detail below about how to install the router and configure it.

Connecting cables

Have you just taken your device out of the box and don't know where to start? Then use the tips from our article. First, let's look at all the available connectors and control buttons that you need to know. Regardless of the model, each TP Link has a standard set of interfaces. In the photo you can see back panel devices.

There is a connector for the mains power cable, a power button, 1 or 2 USB port for connecting a 3G/4G modem, a port for an Ethernet cable and 4 ports for connecting to desktop devices or laptops. Based on this, you can not only use a wireless network, but also use the device as a stationary modem, which increases the functionality of the Link router.

The front panel contains only indicators that are responsible for the status and performance of the router. Now let's move on to the connection.

First of all, connect the Internet cable to the Ethernet connector. Make sure your provider has already connected the Internet. To configure, you will in any case have to connect the device to your computer. To do this, connect the router to one of the yellow connectors using the cable that comes with the kit. Finally, turn on the TP Link using the power supply and the power button on the back of the case. Now you can customize it.

First actions

Before setting up the Tp Link router, you must open the interface through a browser. You can do this as follows:

  • open any browser through which it is most convenient for you to work;
  • then in the address bar enter the following IP: 192.168.0.1 and press Enter on the keyboard. If nothing happens, then look at the address on back side router;
  • A window will open in front of you asking you to enter your login and password. By default, the combination admin/admin is set by the manufacturer;
  • Ready! Now you have entered the TP Link router settings.

Entering correct data

We have come to the most important stage - setting up an Internet connection. On the left side of the page you will see a menu with all the sections.

We will need Network and Wireless. If you are an inexperienced user, then the remaining sections will not be useful to you.

Let's choose a connection type that will match your Internet provider. Select WAN Connection Type from the drop-down list. If necessary, you need to enter your username and password. The VPI and VCI values ​​are also entered in the corresponding fields. It is worth noting that the login and password are those provided to you by the service provider. If you do not have such data, then select Dynamic IP.

After entering all the data, click on the SAVE or Save button at the bottom of the page. Next, the device will begin to reboot. If the Internet connection is stable, then proceed to setting up the wireless Wi-Fi networks. If the modem does not work (no website opens in the browser except page 192.168.0.1), then try again. You may also need to update the firmware, which is downloaded from the manufacturer's official website. Since devices are often sold with outdated firmware, it may not work correctly. The device is updated through the System Tools section. Before you install new version Software, make sure it is compatible with your model.

The installed and configured TP Link should provide stable access to the Internet after a reboot. If so, go to the Wi-Fi settings.

Wireless connection

For TP router Link setting wireless network is carried out through the Wireless section. Let's look at this point in more detail:

  • open the Wireless Settings subsection;
  • in the first field, enter the name of the Wi-Fi point;
  • then select the region you are in;
  • in the Channel field, select a channel, then the settings for each channel are presented;
  • After setting all the parameters, click the SAVE button at the bottom of the page.

The device will reboot again. Now turn on the Wi-Fi module on your laptop or phone to check the functionality of the wireless network.

Wi-Fi password protection

To ensure that no one but you can access your Wi-Fi, you need to protect it with a password. The TP Link router protection is configured through the Wireless Security subsection:

  • select WPA/WPA2 security type;
  • enter unique password at least 8 characters in the PSK Password field;
  • Click the SAVE button to apply the changes.

After the next reboot, your Internet will be protected from outside users. Now you know how to configure almost any TP Link, and you can do it yourself.