• Home
  •  > 
  • Internet
  •  > 
  • Setting up dsl 2640u Rostelecom for interactive television.

Setting up dsl 2640u Rostelecom for interactive television.

This article is dedicated to connecting and setting up the D LINK 2640U modem. Here you will find the complete step by step instructions, learn how to connect a router through a router, how to organize a secure and encrypted PC from other users Wi-Fi network, as well as Network parameters for different providers.

Connecting a modem

In this section we will look at how to connect a modem to a computer.

First of all, the router should be connected to power - insert the end of the wire from the power supply into the corresponding socket on the back of the modem, and the power supply itself into the outlet.

On the back of your modem (router) there are 4 LAN input This is where you insert one of the ends of the blue wire that comes with the D-LINK 2640U, and insert the other end into the LAN port on your PCM.

Photo: Router wireless D-link DSL-2640U

At the same time, be careful: the LAN light on your router should light up with the number of the modem port into which you inserted local wire. In this case, both ends of the wire must be in place (port on the PC and port on the router).

After this, go to the next tab of the instructions, where you will be asked to connect your modem and splitter. There is one more cable included with the modem - insert it into your splitter (separator), and place the other end of this cable into the corresponding port of your router - “LINE”.

Factory settings

Each device has its own “factory settings”. About how to reset D-LINK settings 2640U to the factory ones, and we will go further. You have to reset the settings to factory settings if you simply cannot go to the modem settings menu, or the modem was configured incorrectly.

The “RESET” function is available on every router and using it is much easier than you think:

  • find a needle or awl at home, look at back panel Your router, where you will see a small hole labeled with the word “RESET”;
  • this is it: insert a needle (match) there, wait about 5-6 seconds. In this case, the router must be turned on;
  • After this time, all the lights on the router will go out one by one. It may restart, which means that the modem settings have been reset to factory settings. Now you know how to reset D-LINK 2640U.

Video: Setting up the D-LINK 2640U router

Login via web management

Each modem has its own web management system. In the case of D-LINK router 2640U you can access it through any browser on your computer.

  • check whether the modem is connected to the computer and the splitter (the Line and LAN lights should be on);
  • after that, open your browser (Opera, Chrome) and enter the IP address 192.168.1.1. You will find yourself in a web management window where you can either update your modem or configure it automatically or manually.

Firmware update

In this section we will tell you how to properly update the firmware of your router. After purchasing each device, we advise you to check for the latest firmware (updates), which will ensure trouble-free operation for a longer period of time.


ADSL connection parameters

ADSL connection parameters are very important, because both the speed of your Internet connection and its uninterrupted operation will depend on them.

As described earlier, go to the web control panel of your modem:


How to configure the D-LINK 2640U router for providers

To connect the D-LINK 2640U router, you must first connect the router itself to the computer.

If you do not have signal separation when you need simultaneous operation both telephone and Internet, then do the following:


Rostelecom

  • open your browser, enter address bar 192.168.1.1 and press Enter/;
  • enter your username and password (default – admin/admin) and click on the login button;
  • go to the “Network” tab, and from there to the “WAN” section. Clear all Internet connections using the “Delete” button.

Click on the "Add" button and enter the following parameters:


Domolink


Specify the following options:


Simply skip the remaining pages with the NEXT button and confirm the settings with APPLY. Click the FINISH button to complete the router setup. In a couple of minutes the connection will be established.

MGTS


Ukrtelecom

Go to the configuration menu of your router via web management. And to do this, enter 192.168.1.1 in the browser and press Enter. Enter your username and password, click on the login command.

Uncheck DSL Auto-connect, then proceed to setting up the modem:


Save and wait about a minute for the router to reboot.

Setting up a modem in router mode

The modem can be configured both in router mode and in bridge mode. To configure the modem in router mode, open the web control panel. To do this, open your browser and enter 192.168.1.1 in the address bar. Next, enter your username and password (by default – admin/admin), log into the panel and go to WAN settings. Now you will need to fill out the network parameters, which can be obtained from your provider, or read in the sections above.

Wi-Fi network

Go to the web control panel of your router:


Carry on wifi setup, you can now enter your network security settings:


In the article we looked at all configuration options D-Link router DSL-2640U from connecting it to power and your PC, to setting Internet parameters for different providers. We hope that our article was able to fully reveal the answers to your questions.

This article will discuss step-by-step setup Internet, IPTV (also called Interactive TV), as well as wireless access using universal router DSL 2640u Rostelecom. The named device is a modem that the company issues to new subscribers if they connect to an ADSL line.

Most of the time I write detailed instructions, and as an example I’ll take connections to a specific Rostelecom branch. IN this material an example will be the Krasnoyarsk branch of the organization. As for the settings for your region, they can be found on the service provider’s website.

Thanks to the described approach, you will be able to special problems configure a DSL 2640u modem in your region, because only the data in the VPI/PCI point changes, which, by the way, is publicly available.

Instructions for setting up a DSL 2640u router from Rostelecom

1. Go to the WEB interface of your modem.

Before entering the modem settings, make sure that each wire is connected correctly. To do this, you need to read the article on how to connect correctly telephone line to ADSL. If everything is good, then you can move on to the next stage. Now open any browser installed on your computer (absolutely any will do), enter in the address bar 192.168.1.1 , then press “Enter”.

At this stage, a window should pop up that asks for a username, as well as a password to enter the device interface.

Note. If your interface is not light, but dark (grayish), then this indicates that you need to update the firmware. The login and password to enter the interface remain standard - “admin”, “admin”. Of course, the quotes need to be removed.

Due to the fact that Rostelecom primarily uses PPPoE connection, then we will configure network access in this mode.

2. From the first menu, go to “Network”, and from there to “Connections”. To access the Internet, you need to create a connection by clicking “Add”.

“Connection type” select “PPPOE”, in this case the modem will not work as a router. If you want to use some other device as a router (which is probably more suitable in terms of technical characteristics), then select the “Bridge” mode (then the DSL-2640U will work as a kind of bridge);

3. It is required to register certain PVCs.

You need to write “VPI and PCI” that correspond to your subject for which you are setting up. If we take our example from Krasnoyarsk Territory, then 0 and 35 are set. To get information about your region, just look at the relevant information on the website, you can also contact technical support on this issue;

4. Next, write down the “PPP name” - this is the login specified in the agreement, “Password”, as well as “Password Confirmation” - everything is in the agreement. It is best to write this information in text file to eliminate errors.

5. Make sure “Keep Alive” is enabled;

“LCP interval” should be set to 15, “LCP failures” enter 2 - this means that the device will send a couple of requests in a row to authorize the server, and if the attempts fail, then new request will be done 15 seconds later. Those people whose DSL link on their modem often disappears should be set to 5 and 1, respectively;

6. Enable "IGMP";

Save the resulting settings. If you only need to set up Internet access, then you don’t need to read further. Just click on “Save” (top right).

If you need to also activate IPTV, then read on. For example, let's take the same router model.

To set up IPTV, you will need to create a couple of additional connections; set the mode to “Bridge”. Register the VPI and VCI of the region again - you already know where to get them. Click on the “Save” button.

For example, for Krasnoyarsk the value is paired (1/35 and also 1/36), in in this case You also need to create a pair of “Bridge” connections. Therefore, one more is added. When these parameters are not paired in a region, it will be quite simple to create a single connection.

It turns out that we have 5 connections (one of them is LAN, don’t forget). But that's not all! For good operation of the Internet and television, you need to create a group of interfaces. In other words, pass traffic from the TV into the LAN port, and leave access to the Internet in the remaining ports. It's easy enough.

7. Go to “Advanced”, then “Interface Grouping” and add a group.

Create your own group for television. “Name” - you can enter any name here. Move “LAN4” and a pair of “Bridge” connections from the column from left to right. Save the result.

The Internet will be in the first three LAN ports, as well as via WiFi, but TV will be in the remaining one. Click "Save and Reload" (located in the top right corner). After the reboot is completed, you can connect all the corresponding cables. Wait at least a couple of minutes so that the device has time to adjust to the new settings.

Setting up WiFi on a DSL 2640u modem Rostelecom

Go to “WiFi” 0 “ General settings" Pay attention to the SSID field; in fact, there should be the name of your network, which will be visible to those connecting.

After that, enter the “Encryption Key” (in other words, this is the password when connecting to the network). Enter and click “Save”. Also reboot the router and wait a couple of minutes. At this point we can assume that Rostelecom has been configured for DSL 2640u.

You can use the device to its full potential. If something still doesn’t work for you, contact technical support.

After the user configures the D Link DSL 2640U, he receives a full-fledged and fairly fast .

Moreover, among additional tasks– distribution of received data using wired and wireless connections.

The third is the provision of television using IPTV technology.

Thus, by receiving a signal from the telephone network, using this modem you can provide the Internet to your entire apartment, house or office.

Features of the device

D-Link modem The DSL-2640U is a device that, as a rule, comes complete with connection equipment telephone Internet(although you can buy it yourself).

A device with functionality regular router, is used by various providers, including one of the largest - Rostelecom.

At the same time, it is suitable for creating for 1–2 computers, and copes with more serious tasks:

  • obtaining data on telephone cable With maximum speed up to 24 Mbit/s;
  • Internet distribution using cables connected to the modem via 4 LAN connectors;
  • creating a wireless home or office network with the possibility simultaneous connection up to 10 devices operating according to 802.11 b/g/n standards (that is, in modes with data transmission and reception speeds from 11 to 150 Mbit/s).

This ensures complete security information due to firewall using WEP, WPA and WPA2 technologies.

Rice. 2. Go to the router settings.

You should know: By default, both the username and password are admin. If desired, you can set your own values, increasing network security.

Setting up an ADSL connection

In order to configure the modem connection with telephone network you should know the information provided by the provider - connection type and interface parameters.

Most often, they are specified in the network connection agreement. Sometimes you have to contact the operator’s technical support for this.

Procedure during the setup process:

  1. Open the “Networks” item;
  2. Go to the connections section and select “Add”;
  3. Creating a connection name (the easiest way is to leave this parameter unchanged);
  4. Selecting the connection type (usually PPPoE, although some providers may have others - for example, VCI or VPI);
  5. Enter other information provided by the provider.

Now that the modem has connected to the network, all devices connected via cable will receive the Internet automatically - without passwords or additional settings.

However, to provide a wireless network, you need to additional settings.

Setting up Wi-Fi on the modem

And the wireless Wi-Fi line is still used to connect tablets, smartphones and laptops to the network.

After rebooting the modem, you can connect all the necessary cables to it.

But, if for some reason the fourth port is needed for wired connection to the computer's Internet, you will have to configure the DSL-2640U again, returning the last port to its previous capabilities.

As you probably already understood from the title of the article “...D Link 2640u setup, firmware”, we will talk about setting up a router from the companies D Link, 2640u. This model allows you to create a full-fledged home wireless network using the incoming ADSL signal. So, let's start setting up D Link 2640u .

Connecting a d link dsl 2640u modem to a computer or laptop

There are two ways to connect a d link dsl 2640u modem to a network card.

Method one:

Direct connection to an ADSL wire (the wire provided by your Internet provider). We take the wire and insert it into the ADSL port of the router.

Then we insert the patch cord (a wire crimped at both ends with RJ-45 convectors), one end into one of the LAN ports, and the other into the network card of a computer or laptop.

Method two:

The second method differs from the first in that if you have an ADSL wire there is a signal not only the Internet, but also telephone. Then you need to use “Split”, which comes with the modem.

We insert the ADSL wire, which carries the Internet and telephone signal, into the “LEIN” port (indicated by number 1 in the figure). Next, into the socket marked “ADSL” (number 2 in the figure), we connect “d link dsl 2640u” with the second wire included in the kit. And we connect the “Phone” port (number 3 in the figure) to your phone.

Then we connect the modem to the computer as in the first method.

After connecting, we will need to configure our network card on the computer. You will learn more about this.

Connection, setting up a d link 2640u modem

After connection and setup network card You can start setting up the router itself. This can be done using the setup disk that comes with the kit. Everything is simple there, we insert the disk into the computer, wait for the settings window to load and then follow the prompts to configure it. But I don’t really like this method; it’s better to do everything yourself from the modem’s working interface.

Let's go to the working interface of the 2640u modem. Open the browser you use, write 192.168.1.1 in the address bar, a window will appear, you will be asked to enter “Username” / “Password” - by default it is admin/admin.

Enter and press the “OK” button.

Setting up an ADSL connection

After you have logged in, the “d link dsl 2640u” router configuration window will open to your eyes.

Now you will need to configure the ADSL connection. To do this, you need network settings data provided by your provider (they will be indicated in the contract or contact technical support). Then go to the “Networks” item, select “Connection” and click “Add”

Here you need to set “Connection name” It is better to leave it by default. Next, select “Connection type”. On at the moment the most popular connection type is “PPPoE”. Also, some providers use VPI and VCI. After this, you need to enter the data provided to you by your provider. And click the “Save” button. You can now check the Internet!!!

Setting up Wi-Fi on d link dsl 2640u

Now we proceed to the most long-awaited point of setting up a wireless connection.

Select “WiFi”, then “General settings” and check the box indicating what you want to enable wireless connection. Click the “Change” button.

Now let's go to " Basic settings", here we need to indicate the name of our network opposite the inscription “SSID". Click “Change” - this is the most secure encryption method. Also, don’t forget to specify the password opposite the inscription “System”, there we select the item “ save and reload" After rebooting, you can access Wi-Fi. If you don't know how to do this, it is described in detail.

I advise you to watch the video.

Setting up the D-Link DSL-2640U router

.

Nowadays every family has a computer, and not even just one. For convenient use and access to the Internet, you will need a special router. A pretty good solution is to connect all the computers available in the room using local network. For these purposes, you can purchase a special ADSL modem.

In this article we will look at the successful (according to most users) model D-Link DSL-2640U. Let's talk about the advantages and disadvantages of the device, as well as customer reviews.

Specifications

The total weight of the model is 300 g. Power is provided by special cable which connects to the network. There are about five indicators that ensure comfortable operation.

Design

Its design is reminiscent of many other routers of the same type. In fact, it is a regular black box. On it you can see indicators that notify you about the operating modes of the router. All of them are illuminated in a green tint. As usual, all connectors and ports are on the rear panel. Specially built-in shutdown button wireless internet. This makes the model easier to use.

On the rear panel there is a special factory sticker, which is hard to miss. As soon as the buyer unboxes the model, he will immediately see it. The fact is that the sticker covers the entire panel, and in order to use any port or simply turn on the router, you need to tear it off.

Equipment

The package contents of the DSL-2640U modem are quite commonplace. It includes special set cables that are responsible for access to the Internet, etc. Available network wire, splitter, software For quick setup, as well as a user manual. The disk contains a utility that will clearly appeal to many buyers, although professionals treat it with cold blood. Often, most people configure the router themselves, without resorting to using this software.

Settings menu

Router D DSL-2640U is quickly and easily configured using the disk. After opening, the program will ask you to choose a provider. Then you need to enter your username and password. After a few minutes, when the program has made all the settings, the connection will appear. But there is one drawback - the modem is activated in router mode. The fact is that this is not suitable for all types of Internet connections. That is why it is important to be able to configure the router yourself.

The configuration interface looks good. The design is good and clear. It should be noted that in previous models the web setup was quite complex, confusing, and the design was not attractive. It has become much more pleasant to work in the current one. Moreover, now the entire settings menu has been translated into Russian. If you wish, you can always switch to English.

Network creation

Create WAN network pretty easy. However, this requires a little knowledge and skills. Unfortunately, the instructions that come with the kit are not particularly informative. The setup algorithm is described there, but it is incomprehensible and does not help resolve issues that arise during the process. It is also quite primitive, there is no description of all available functions and options. The manufacturer's logic is clear. He thinks in such a way that if the user has the skills to create a network, then please let him figure it out himself, and if the user is a beginner, he needs to work with the disk.

The DSL-2640U router makes setting up a wireless network quite easy. It's simpler than WAN connection. If the provider does not require special settings, then you don’t have to do anything special at all. Standard wireless network already activated and able to function. In this case, it is necessary to configure the network parameters of the laptop or computer itself. If everything is fine with them, then the network will appear instantly.

By default, wireless point access does not receive encryption. Therefore, if you need to password protect it, you will have to understand the settings menu a little. You should go to “Security” and look at “ Network authentication" There you need to set the desired key.

Modem operation

If a specific configuration method worries the consumer only in the first days of installing the router, then you will have to come to terms with its operating features and deal with them every day. It must be said that the DSL-2640U modem showed both good and bad sides. Let's take a closer look.

The router functions well with a rather poor line. He does a great job with a large number signals and noise. The network works stably, without any interruptions.

If we consider the model as an access point, then it is worth noting that it functions at an average level. Performance indicators depend on the power of the supplied signal. External antenna does not connect, the original one is not removable. Unfortunately, the modem does not provide a fairly strong Internet signal. If you use it in a three-story house, then a stable and normal network will only be where the router itself is installed. In the back rooms the Internet is poor and sometimes intermittent. Therefore, this model is not suitable for a private home. But for an ordinary apartment it will be quite suitable.

D-Link DSL-2640U switch shows stable work. All devices that are on the local network see each other perfectly and interact with each other. The modem can distribute not only its own Internet, but also that received via external port. A wireless network can also operate in the same mode.

Disadvantages in communication

What do consumers consider to be disadvantages? is not able to divide and limit the Internet speed of other computers connected via a local network. Although this may not be very necessary in everyday life, however, having this function will not hurt.

Another disadvantage consumers call is quite weak block nutrition. Unfortunately, it can burn out in literally a year of use, which will result in additional expenses. This is also a shame because the warranty on the device itself is 1 year. But many consumers note the following: the manufacturer, knowing about the problem, replaces the power supply free of charge even after the grace period for service has expired. Perhaps this is due to the desire not to advertise this disadvantage. If necessary, you are always allowed to try to repair the part yourself.

And the last serious drawback is constant overheating DSL router-2640U. The firmware does not have special function, which will cool it. Due to the fact that the model did not receive a mount and a stand for placement in a vertical position, the modem begins to heat up too quickly. The manufacturer could have easily corrected or prevented this problem, but this did not happen. Therefore, many buyers place the modem in some cool room. This could be a pantry, a windowsill, or a place on the refrigerator. However, not everyone has this opportunity. In general, overheating does not affect the operation of the router in any way. It doesn’t start to slow down and doesn’t give out failures. But you still need to keep an eye on it so that the parts don’t burn out.

Results

The D-Link DSL-2640U modem is considered universal device, so it is easily suitable for use both at home and in offices. Neither the type of Internet nor what set of devices is used matters. The model did not receive much flexibility or functionality from the manufacturer, but it is quite easy to configure, it does not lose connection or freeze.

Most common problem The problem with this router is overheating, but it does not affect the functionality of the device. Many consumers recommend purchasing it, so don’t worry! The DSL-2640U router, the firmware of which has become much more convenient and pleasant, has long been in demand among domestic buyers.