Connecting the Internet to the tablet from a computer. Connecting the tablet to the computer

Tablet owners sooner or later are faced with the need to transfer files stored on their portable devices to a computer.

One of the simplest and most common ways to exchange data between a PC and a tablet is to combine devices using a USB cable. This way you can easily move music tracks, photo and video information, documents and other files. In addition, by connecting the tablet to a PC using a cable, you can debug individual applications, the entire system, and reflash the device. A USB cable is always included with the tablet. The principle of connecting a tablet to a personal device is the same for all models of equipment. How to connect a tablet to a PC via USB?

Connecting the tablet to a computer via USB

To combine these devices, prepare a USB cable. Depending on the device model (tablet manufacturer), you can use the following variations of the “conductor” - USB, microUSB, miniUSB.
The technical side of the connection includes 2 points:

Place one end of the cable into the appropriate connector on the tablet.
Direct the second end of the cord to the USB output on the computer.
This will be followed by a short beep (on the PC) - the system “saw” the device.
Your tablet will appear in the list of removable media, and a message about the successful combination of devices will appear on the PC monitor in the bottom right corner.
At the same time, a notification “Connected as a storage device” will appear on the tablet.

Now you can start exchanging information.

Connecting the tablet to a computer via USB - possible reasons for failure

However, the actions listed above are not always sufficient. Then you should check all the settings and make changes if necessary.

USB Debugging

Go to Settings on your tablet.
Find the "For Developers" item. If it is not there, go to the “All settings” tab, then click “About tablet”. Find the “Build number” field and click on it 7 times. If everything is done correctly, the message “You have become a developer!” will appear, and the required item will appear in the tablet settings.
Activate the “USB Debugging” mode by checking the box.

These actions are designed to eliminate possible conflicts between the PC and the tablet that are related to the specifics of the Android OS.

Defining a tablet as a removable storage device

Click the USB connection icon – “USB connection established.”
In the next window, select “Enable USB storage”.
When you do this, you will see a warning message from Windows indicating that some applications may be stopped. Click “Ok”.
Now the data from the tablet's internal storage, as well as its SD card, is available, and the device itself acts as an external drive. By opening “Computer”, you will see that the computer “sees” the tablet and identifies it as a removable drive. Working with device files in this case is similar to working with OS files.

Installing drivers

Another reason why you are unable to establish contact between devices is the lack of necessary drivers on your computer. This is possible if the equipment did not install them automatically. In this case, perform this operation yourself.

Go to the official website of the tablet manufacturer and find the necessary drivers.
If for some reason you don’t see what you need, you can use universal drivers for Android http://androidp1.ru/drviver-for-android/.
In some cases, the described actions are not enough. Then it’s worth trying to turn to specialized programs. Which one depends on the brand of your device. For Samsung – KIES, for Lenovo – IdeaTool, for HTC – Sync Manager, for Sony – Media Go.

Firmware problems

It happens that after several successful connections of the tablet to the computer, the devices cannot be synchronized again. The reason for the failure may be a recent update to the Android OS or the installation of unofficial firmware. The only way out is to return the previous settings. To do this, you need to either “roll back” the system to a previous version or reset the settings to factory settings.

Hardware problems

If all factors are taken into account, and the problem persists, check the integrity of the USB cable, as well as the serviceability of the corresponding connector. In addition, it is not enough to know that there is a USB connector in front of you; you need to know its version. Interfaces 2.0 and 3.0 are incompatible.

The solution to the question “how to connect a tablet to the wired Internet” depends on the network equipment, the type of Internet connection and the operating system of the tablet.

Unfortunately, in some cases, a cable Internet connection is technically impossible to implement.

Wired Internet is called an Ethernet connection (pronounced “ethernet”), and the connector for connecting it is RJ-45.

Can I connect my tablet to wired internet?

To connect your tablet to the wired Internet, first of all you need to find out the type of your Internet connection: it can be a DHCP or PPPOE connection.

You can find out the type of connection from your contract with your provider or from your Internet service provider's 24-hour support service.

Also, the sequence of setting up an Internet connection depends on the operating system installed on the tablet: all desktop PCs are suitable for Windows devices.

It is much more difficult to set up a tablet connection to the Internet via USB for Android devices, so here we will look at how to connect the tablet to the wired Internet on this OS.

How to connect a tablet to the Internet via cable?

Connecting Android devices to a simple cable Internet primarily depends on the hardware capabilities of the device. Let's look at the main options available to users:

Method No. 1: connecting a tablet with an RJ-45 connector to a wired Internet.

As a rule, the RJ-45 connector has so-called “hybrid” devices that combine a tablet and a netbook.

Setting up an Internet connection depends on the type of connection:

Connect the cable to the tablet, then find and activate the Ethernet connection in the device settings.

-PPPOE

This type will require separate software - pppoew.

In the program, enter the username and password provided to you by your provider to connect to the Internet. Please note: to use the program, you must have the highest rights in the system.

Method No. 2: connecting a tablet with a USB connector to wired Internet

If the tablet has a standard USB 2.0 or 3.0 input for connecting devices (for example, flash drives), then connection is possible through a special adapter (also called a USB network card).

This device looks like an adapter with an RJ-45 socket on one end and an RJ-45 socket on the other.

Connecting the Internet to the tablet via USB:

1. Switch the device to USB host mode;

A DHCP connection will work when Wi-Fi is enabled, and PPPOE will also require pppoew.

Method No. 3: connecting a tablet without RJ-45 and USB to wired Internet

A “classic” example of a tablet without USB ports and RJ-45 is the iPad. On such devices, connecting to a wired Internet is not possible.

However, any compact router, for example, Tp-Link TL-WR702N, can provide Internet connection to any WiFi device.

Such routers are small in size and have a low market value, while the routers are much more functional than simple USB-RJ-45 adapters, which makes them an excellent alternative for connecting a tablet to a wired Internet.

When buying a tablet, the issue of connecting to the Internet becomes very relevant. Without it, the device will not be able to use all its functionality and will become a useless piece of plastic. There are many possibilities and ways to connect a tablet to the World Wide Web: the most common use of a SIM card and Wi-Fi, a computer with a special utility, a phone as an access point, and even the use of exotic adapters for a network cable. Let's consider each of these methods separately.

A tablet without Internet is an unnecessary thing

Mobile communications

Allows you to use the Internet anywhere there is coverage. 3G has long been the norm for everyone; in many cities even 4G communications are available, offering access speeds at home levels. Depending on the need to purchase additional equipment and the complexity of the settings, you can use access through the built-in SIM card slot, a mobile 3G router and an external 3G modem.

Built-in 3G module

Most modern models of Android tablets, even budget ones, are equipped with a 3G module, which allows you to use the device as a regular phone. If not every model can make calls, then access to the network is possible on any of them. You will need to purchase a SIM card from any Russian operator. After that, select the appropriate tariff for the Internet and make simple settings.

For settings on your Android tablet, you need to go to Settings - Wireless & networks - More - Mobile network. Create a new access point. Operators offer automatic settings, but in rare cases they need to be entered manually. You can learn more about the parameters from the operator’s technical support.

For settings on iPad, go to Settings - Cellular - Cellular Data Network and add connection settings. Some Windows tablets have a built-in 3G module. When connecting for the first time, click on the Internet icon - select the operator's name - adjust the settings and connect.

3G router

This and all other methods will have to be used on those tablet models that do not have a SIM card slot.

Having purchased such a router and inserted a SIM card into it, enter the interface using the information from the user manual or indicated on the router to establish an Internet connection. This requires a computer. When you buy a device from an operator, the settings are usually set automatically. After completing the procedure, connect to the Wi-Fi network from your tablet.

3G modem

Here you will have to tinker a little, and in addition to the tablet and router itself, you will need a computer or laptop. Please note that using this method is not possible on every model. If your tablet supports OTG mode, then proceed to the next step. Follow these steps:

Insert the modem into the computer. Wait for it to be determined by the system. The proprietary configuration utility should launch.
Disable PIN code verification.
Download the 3G modem “Mode switcher” program and install it on your computer.
Use it to switch the device to Modem Only mode.
After successfully changing the mode, disconnect from the PC and connect the modem to the tablet using an OTG cable.

Home Internet

Wi-Fi router

This is the easiest way to use landline Internet on a tablet. If you already use it on other devices, for example, a TV, a computer, then simply select your home network, enter the password and enjoy it. You can also connect your phone if you want to save mobile traffic. If you just purchased a router, then configure it on your computer via a disk with a utility or a web interface, entering the connection parameters of your Internet provider and using a reliable security method.

Ethernet cable adapter

It is the most exotic and rarely seen way to connect an Android tablet to the Internet. You will need a special USB-network adapter. It is unlikely that you will find it in every store, but you can order it online without any problems. We recommend this method only to very experienced users, otherwise you may damage the tablet. Our next steps:

On the website http://forum.xda-developers.com, download special drivers to your Android tablet and install them in “Recovery” mode. Each model has its own drivers, so read it very carefully.
Connect the tablet to the adapter via an OTG cable, insert the power cord at one end into the router and the other into the adapter. The Internet should work.

Other computer equipment

Telephone

This is relevant when you have an Android or iOS phone and a tablet without SIM card support, but with Wi-Fi. We will use the phone as a Wi-Fi router. To do this on Android, go to Settings - Wireless networks - More - Modem mode - Wi-Fi access point. Rename the connection and create a password. After activating the mode, you can connect to the Wi-Fi network on your tablet. On an iPhone, this mode is activated through Settings - Cellular - Modem Mode. Please note that the battery of your access point will quickly deplete, so you can connect your phone via a USB cable and activate the USB modem in settings.

Laptop and special programs

When you have a computer or laptop connected to your home Internet and no router, try installing a special program to organize an access point from your laptop. The most famous are “Connectify Hotspot” and “MyPublicWifi” (more about this - How to distribute Wi-Fi from a Windows 8 (8.1) laptop, Programs for distributing Wi-Fi from a laptop). It is very convenient to use this method when traveling, since not all hotels have a wireless connection, while there may be a cable in each room, or when it is not possible to buy a router for home, or is simply impractical.

Conclusion

We looked at all possible ways to connect your tablet to the Internet. Choose the one that is most appropriate in your situation and depending on your technical background.

How do you connect to the Internet? Leave comments.

The ability to go online at any time is almost the main need of every modern person. This is why most public places have Wi-Fi hotspots. But if you have a wired network at home, then after spending a little time, you can connect your phone or via a PC.

The easiest way to transfer data over the air is if your laptop has version 7 or the next version of the operating system from Microsoft installed. Also, for your actions to be successful, the computer must support Virtual Wi-Fi mode. First make sure that you do not forget to install the driver for Wi-Fi.

To turn your laptop into a router, you need to do the following:

Download and install Virtual Router or Connectify. Both applications are freely licensed and therefore available for free.
Set up the software. All you need to do is assign a name to the new network and come up with a password.
Test the Wi-Fi connection on your gadget.

Internet distribution using Windows

If you have a PC with Windows OS, then you can configure the connection using the built-in system tools. The first step is to launch the command line. The instructions are:

Use the Win+R key combination.
After the Run window appears, you need to type the command “cmd”.
Click OK.

This is done quite simply. Create an empty text document in which you save the launch command from step 2. Change the file extension from txt to bat. Now go to the Start menu and find the Startup folder, then add the newly created bat file to it. Ready!

If you are no longer going to use the laptop as a router, then you need to delete the network. This is done using the command: netsh WLAN set hostednetwork mode=allow ssid=“point name” key=“password”. Don't forget to clean the autostart.

Distributing the Internet from a laptop using a USB modem

If you have a laptop with , then setting up Internet distribution will happen a little differently. Make sure that the Wi-Fi driver is installed on the laptop and that the modem is working properly.

The first step is to allow the network to be used. To do this, type “netsh wlan set hostednetwork mode=allow” on the command line. After pressing Enter, you can close the window.

After that, download and install the VirtualRouter Plus program. . You are required to name the network and set a password. You also need to select the connection type to connect your tablet to the Internet. Your USB modem must be in the Shared Connection list; if it is not there, then it is impossible to enable Wi-Fi distribution. After entering the data, click the “Start Virtual Router Plus” button. Now you can take the tablet and test the connection.

Internet distribution from a computer

A desktop computer can also become an access point. To do this, just install a Wi-Fi card or a USB wireless network transmitter. The setup itself follows a similar scenario as in the case of a laptop.

Internet connection via USB

If you don't have a PC with Wi-Fi, you can connect your tablet to the Internet via a USB cable. For everything to go well, install the tablet drivers, the AndroidTool application and the Android SDK program on your computer. After this you can:

In the Network Sharing Center there is a section " Managing network connections" Right-click to open the properties of the local connection. In the “Sharing” item, check the box next to allowing access to network resources.
In the tablet settings, find the item “ For developers" and enable USB debugging. Now you can connect the gadget to your computer using a cable.
Launch AndroidTool. Click the Refresh button and wait until your device appears in the Connections window. After that, click Check Dns and select the address that will be second from the top. You can now click Connect to establish a connection. “Connection Done” will appear in the notification window next to your device. If this happens, then everything was done correctly.
You can test the Internet from your tablet. Do not disconnect the USB cable.

This method of connecting a gadget to the Internet is quite elementary, but is not always possible on tablets without root rights.

The tablet connected to Wi-Fi, but there is no Internet

Have you successfully received a Wi-Fi signal on your tablet, but you can’t get online? If the signal is being distributed, then pause it, then in the Network Control Center go to the section responsible for the adapter settings. Call up the properties of the active connection by right-clicking. The window that appears will have a “Sharing” tab. Check all the boxes. In the “Connecting your home network” field, select the network you previously created.

Re-enable the Internet sharing function. If network access does not appear on your tablet, then disable the firewall on your PC as well. There may be a problem with your security software settings.

Of course, it’s best to buy an inexpensive router and never “dance with a tambourine” again. But in case of urgent need, you can easily connect your tablet to the World Wide Web via a laptop or desktop computer.

According to statistics, tablets are most often used for surfing the Internet and working with applications, so it is useful to know how you can connect your tablet to the Internet. There are many models of tablets on the market, the more modern ones have built-in modems for Internet access, the older ones are equipped with SIM card slots, with which you can connect to the World Wide Web. There are also models that can only be connected to the Internet via a Wi-Fi network.

How to access the Internet from a tablet via Wi-Fi

To establish an Internet connection from a tablet computer via a Wi-Fi network, you must first find out the name of the network you want to connect to and the password for it. If the network is open, then a password is not needed. Further steps are approximately the same for devices on the iOS and Android platforms. First, here are step-by-step instructions for connecting devices on the iOS platform to the Internet:

Enter the "Settings" section.
The Settings button looks the same on all Apple devices
Select the Wi-Fi tab.
In the settings window you need to select the Wi-Fi line
Select the name of the network you want to connect to and enter the password (if necessary), then click Connect.
No password required when connecting to public networks

Android tablets connect to the Internet using a similar principle. To connect, do the following:

Pull the screen down from the top to access Quick Settings. In the panel that opens, click the Wi-Fi button.
Buttons for activated functions are illuminated in green
After clicking the button, a list of all available Wi-Fi networks will open. Select the one you want to connect to.
Select the network you want to connect your device to
Enter the password to join the selected wireless network.
Enter your password to access the network
Check your Internet access by launching the browser installed on your device.

How to connect from a tablet to 3G or 4G mobile Internet

To connect to 3G or 4G mobile Internet, you need to make sure that your tablet has a SIM card slot. If there is a slot for a SIM card, insert a card from one of the Russian mobile operators with a paid mobile Internet access service.

Select the type of SIM card compatible with your device (“nano” or “micro”)

Enabling mobile internet on Android

The standard Android system is adapted even for inexperienced users, so all settings in it are quite simple. By pulling the screen down from top to bottom, you will see a panel with buttons for quick access to various functions (this panel is often called the “curtain”). On the curtain you can find a button to control access to the mobile Internet. Depending on the system version, the button may have different names (“Packet data”, “Data transfer”) or not be called at all. Visually, it looks like two arrows pointing up and down.

Activate the mobile Internet function by clicking on the “Mobile data” button

Press the button and it will light up, which means the modem is activated to receive mobile Internet traffic. Remember that you can only use a 3G or 4G network if the tablet is designed to work with such networks.

On some Android tablets, manufacturers install their own skins, so the appearance of the home screen may look different on them. One of the most common shells is Samsung's TouchWiz. Its interface differs from the standard Android interface, so let’s look at setting up mobile Internet for such a device step by step. There is a quick connection option, similar to the diagram discussed above; for it, just pull the screen from top to bottom and select the button to connect to a mobile network. Another connection option looks like this:

Find a button on the tablet screen with a picture of a gear and the name “Settings” and press it.
To connect to the mobile Internet, you need to enter the device settings
Select the “Connection” section and in the menu that opens, click on the “Data Usage” line.
To connect to mobile Internet, select the “Data Usage” line
In the window that opens, check the box next to the words “Mobile data”.
Activate the mobile data feature by checking the appropriate box
Open your browser and check if the internet is working.

Sometimes it may be necessary to make more subtle adjustments. Most often this happens when connecting to the mobile Internet for the first time with a new SIM card or when you need to restore reset settings. In this case, you need to proceed according to the following algorithm:

Enter the settings section.
Click the “Wireless Networks” tab in the menu (it is possible that the required tab will be called “Advanced” or “More ...”).
Go to the menu item “Mobile networks” (or an item with a similar name, for example, “Mobile network”).
Select the line “Access Point” (options for the name “Access Points” or APN are also possible).
Enter new settings (where to get the data to enter will be described below).
Press the touch key with a square on it and select the “Save” action.
Mark the newly created access point with a checkmark.
Reboot the system.

Enabling mobile internet on iOS

Setting up a tablet on iOS is done in a similar way. You need to go to the settings section, and then select the “Cellular data” line in the menu. In the window that opens, set the toggle switches opposite the lines “Cellular Data” and “Enable LTE” to the “On” position. Then click on the “APN Settings” line and enter the values received from your mobile operator in the appropriate fields. To check Internet availability, launch the browser installed on your device.

To set up mobile Internet on an iPad, you need to enter the connection parameters obtained from your mobile operator

Where can I get the data that needs to be entered when setting up mobile Internet?

For the data entered into the settings fields, you should contact the telecom operator that provides you with mobile Internet access service. This information can also be found on the website of the Internet service provider in your area.

Mobile Internet connection data can be obtained from your provider

I have never had to delve into network access settings so deeply. Usually it is possible to access the Internet even with automatically configured settings. If you still need to turn to the technical specialists of the provider company for help, they will provide you with all the necessary instructions for connecting to the mobile Internet. In other words, technical support workers will help you find the necessary fields for entering data and tell you what to enter in them.

How to set up Internet access on your tablet via a USB modem

Only owners of devices running Android OS can join the global network using a USB modem. iOS devices do not support this feature. To use the modem, you will have to purchase the modem itself, as well as an OTG cable to connect the modem to the tablet.

After connecting the modem to the tablet using a cable, you must:

Wait a few minutes until the tablet recognizes the modem.
After that, go to the tablet settings section and in the “Data transfer” section, enable the “Mobile traffic” function.
In the same section, go to the word “More” or “Advanced” and enter the necessary information in the “Mobile network” and “Access point (APN)” settings. As mentioned above, this information can be obtained from your Internet service provider.
Launch your browser and check internet availability.

Video: how to connect your tablet to the Internet via a USB modem

How to connect a tablet to the Internet via a smartphone

To connect your tablet to the Internet using your smartphone as a wired modem or wireless router, you need to enable modem mode on your smartphone. For devices based on Android OS, various modes of operation of the smartphone as an Internet access point are available: USB modem, Bluetooth modem, Wi-Fi access point. iOS-based smartphones can only provide their owners with wireless access mode.

Setting up modem mode on Android devices

To activate the modem function on an Android smartphone, you need to follow these steps:

Select the “Wireless Networks” section in the phone settings menu, and in it - the “More...” line.
On the Wireless Settings screen, select "Tethering Mode"
On the screen that opens, set the desired mode. The smartphone can serve as a USB modem, a Wi-Fi access point, or be used as a Bluetooth modem.
Select the appropriate modem operation mode

Testing Internet speed when using a smartphone as a modem showed that the “Wi-Fi hotspot” mode gives the best results.

Activating tethering mode on iOS devices

To activate the modem mode on iPhone smartphones, you need to go into the device settings, select the “Modem Mode” line and in the window that opens, set the toggle switch opposite the words “Modem Mode” to the “On” position. The page will display the name of the network and the password to access it. This data can be used to connect the tablet to the Internet, which is distributed through a smartphone.

In modem mode, the smartphone independently generates a password to access the Internet, which you will need to enter when logging into the network from the tablet.

After activating modem mode on your smartphone, you need to connect your tablet to it. The steps to connect the tablet to a wireless network and to a USB modem are described above.

The author advises to remember that the names of menu items and the location of these items may change depending on the software version used on the device. But, despite this, the author always managed to perform the correct sequence of actions when setting up Internet access from mobile devices, guided by the available instructions and simply common sense and logic. As a last resort, you can read the documentation for a specific device or ask friends, colleagues or relatives for help.

Video: how to connect your tablet to the Internet via your phone

Connecting to the Internet on modern mobile devices can be done in different ways. They are all quite simple, you just need to read the instructions first. But if you encounter difficulties while connecting to the network, then do not hesitate to seek help from the younger generation, colleagues at work, or the service specialists of your Internet provider.