Creating a Windows 7 image on a USB flash drive. How to quickly and easily create a bootable USB flash drive
If you want to install or reinstall an operating system on a computer or laptop, then it is quite natural that you have a question: how to create a bootable USB flash drive with Windows. In this article we will look at three ways that will help us with this.
Using the first and second, you can make a bootable USB flash drive for Windows 7, Windows 8 or Windows 10. Using the command line or the WinSetupFromUSB program, you can make a bootable USB flash drive for Windows XP.
Select a flash drive with more memory than the operating system image you have on your computer. Save all information on it to HDD or other external media, since the flash drive will be formatted, accordingly all data from it will be deleted.
Via command line
To create a bootable USB flash drive using the command line, you do not need to install anything on your computer. third party applications. To launch the command line, press the key combination Win + R, the “Run” window will open. In the "Open" field, write cmd and click "OK".
Let's display a list of all devices - enter list disk .
IN in this case There are two devices connected to the laptop, Disk 0 and Disk 1. From them you need to select a flash drive, which we will make bootable. I took a 4 GB flash drive, so we look at the “Size” column, it corresponds to Disk 1 - 3.9 GB. Enter the following command – select disk 1. If your flash drive corresponds to another device, for example Disk 2, enter the command select disk 2 - only the number at the end changes.
Enter the clean command.
Using the create partition primary command, we will create a primary partition.
Select it – select partition 1 .
Let’s make it active – active .
Let's format the flash drive in NTFS format – format fs=NTFS. Wait for the process to complete.
After that, select a letter for the section, for example R - enter assign letter=R .
We leave from diskpart programs– type exit . To close command line, retype exit .
The bootable USB flash drive has been created. Now you need to copy the files to it for Windows installations. If you have them stored in an archive or in an image, extract all the files from them onto a flash drive.
To install Windows from a flash drive, in the BIOS we change the boot priority; we need to boot from the created flash drive. You can read detailed articles about installation by following the links at the bottom of the article.
Using the Rufus program
This program does not require installation on your computer, takes up very little space, is free and easy to use. Download the Rufus program by following the link.
We launch it on the computer. In the Device field, select the required flash drive. Make sure the box is ticked "Create a boot disk". Then click on the floppy disk to select the operating system image.
Through Explorer, look for the image on the computer and click “Open”.
A line will appear at the bottom "Using an image". Click Start. The program will warn that all data from the flash drive will be destroyed, click “OK”.
Wait until the flash drive is formatted and the ISO image files are copied to it. Then click "Close".
A bootable USB flash drive with the Windows operating system has been created. We change the boot priority in the BIOS and install the new OS on the computer.
Using WinSetupFromUSB
First, download the program WinSetupFromUSB, for this you can follow the link. We insert the USB flash drive, which will be bootable, into the computer or laptop and launch the program.
In area « USB disk selection and format" select the desired flash drive and press the “Bootice” button.
In the next window, in the “Destination Disk” field, select the flash drive from the list again. Here you can navigate by memory capacity. I took a 4 GB flash drive, so USB 3.9 GB is suitable for me. Click "Perform Format".
In field " File System» select file NTFS system and click "OK".
In the following windows there will be warnings that the flash drive will be formatted, all data will be deleted, etc. Click "OK". IN last window Click "Yes" and wait for the process to complete.
A window will appear indicating that a bootable USB flash drive has been created and can be written to. necessary files. Close the “BOOTICE” window by clicking on the red cross.
In the main program window, in the “Add to USB disk” area, check the box "Windows 2000/XP/2003 Setup". Click on the rectangle opposite the field and select the folder in which you store your operating system files.
If Windows installation files are stored on your computer in an archive or image, you must first extract them.
Click “GO” and wait for the files to be written to the flash drive.
Using WinSetupFromUSB program, You can easily make a bootable USB flash drive with the Windows XP operating system.
As sad as it may be for many, the era of CD/DVDs is slowly but surely coming to an end... Today, users are increasingly thinking about having an emergency bootable USB flash drive in case they suddenly have to reinstall the system.
And the point here is not only to pay tribute to fashion. The OS is installed faster from a flash drive than from a disk; such a flash drive can be used on a computer that does not have a CD drive/ DVD disc ov (and USB is on all modern computers), and you shouldn’t forget about ease of transfer either: a flash drive can easily fit into any pocket, unlike a disk.
1. What is needed to create a bootable USB flash drive?
1) The most important thing is a flash drive. For Windows 7, 8, you will need a flash drive with a size of at least 4 GB, preferably 8 (some images may not fit into 4 GB).
2) An image of a Windows boot disk, most often representing a file ISO format. If you have an installation disk, you can create such a file yourself. It is enough to use the program Clone CD, Alcohol 120%, UltraISO and others (see how to do this).
3) One of the programs for writing an image to a flash drive (about them we'll talk below).
Important point! If your PC (netbook, laptop) has, in addition to USB 2.0, also USB 3.0, connect the USB flash drive during installation to USB port 2.0. This applies primarily to Windows 7 (and lower) operating systems, because... These OS do not support USB 3.0! The installation attempt will end with an OS error stating that it is impossible to read data from such media. By the way, they are quite easy to recognize, USB 3.0 is shown in blue, the connectors for it are the same color.
usb 3.0 on laptop
And one more thing... Make sure your Bios supports booting from USB media. If the PC is modern, then it should definitely have this function. For example, my old home computer, purchased back in 2003. can boot from USB. How configure Bios to boot from a flash drive - .
2. Utilities for burning a bootable ISO disk to a USB flash drive
2.1 WinToFlash
I would like to focus on this utility mainly because it allows you to burn bootable flash drives with Windows 2000, XP, Vista, 7, 8. Probably the most universal! You can read about other functions and capabilities on the official website. Here I would like to look at how you can create a flash drive for installing the OS.
After launching the utility, by default, the wizard starts (see screenshot below). To proceed to creation bootable flash drive, click on the green checkmark in the center.
System migration process Windows files usually takes 5-10 minutes. At this time, it is better not to load your PC with unnecessary resource-intensive processes.
If the recording was successful, the wizard will notify you about this. To start the installation, you need to insert the USB flash drive and restart the computer.
One of best programs for working with ISO format images. It is possible to compress these images, create, unpack, etc. There are also recording functions boot disks and flash drives (hard drives).
This program was mentioned quite often on the site, so here I will give only a couple of links:
2.3 USB/DVD Download Tool
A lightweight utility that allows you to burn flash drives with Windows 7 and 8. The only negative, perhaps, is that when writing, it may give an error of 4 GB. The flash drive supposedly doesn't have enough space. Although there is enough space for other utilities, on the same flash drive, with the same image...
By the way, the issue of recording a bootable USB flash drive in this utility for Windows 8 was considered.
2.4 WinToBootic
Website: http://www.wintobootic.com/
Very simple utility, which will help you quickly and worry-free create bootable media USB with Windows Vista/7/8/2008/2012. The program takes up very little space - less than 1 MB.
At first launch it required installed Net Framework 3.5, not everyone has such a package, and downloading and installing it is not a quick task...
But the process of creating bootable media is very fast and pleasant. First, insert the flash drive into the USB, then launch the utility. Now click on the green arrow and indicate the location of the image with installation disk Windows. The program can directly record from an ISO image.
2.5 WinSetupFromUSB
Simple and main free program. With it you can quickly create bootable media. By the way, what’s interesting is that a flash drive can accommodate not only Windows OS, but also Gparted, SisLinux, built-in virtual machine and etc.
To start creating a bootable USB flash drive, run the utility. By the way, please note that there is a special add-on for the x64 version!
Once launched you only need to specify 2 things:
- First, indicate the flash drive on which the recording will be made. Usually, it is determined automatically. By the way, under the line with the flash drive there is a checkbox: “Auto Format” - it is recommended to check the box and not touch anything else.
- In the “Add USB dick” section, select the line with the required OS and check the box. Next, indicate the location on your hard drive where the image with this ISO OS is located.
- The last thing you do is click on the “GO” button.
By the way! The program may behave as if it is frozen while recording. In fact, most often it works, just do not touch the PC for about 10 minutes. You can also pay attention to bottom part program window: messages about the recording process appear on the left and a green bar is visible...
3. Conclusion
In this article we looked at several ways to create bootloaders. USB flash drives. A few tips when recording such flash drives:
- First of all, copy all the files from the media, in case you need something later. During recording, all information from the flash drive will be deleted!
- Do not load your computer with other processes during the recording process.
- Wait for success information message from the utilities with which you work with the flash drive.
- Disable antivirus software before creating bootable media.
- Don't edit setup files on the flash drive after recording it.
That's all, happy OS installation everyone!
How to create a bootable USB flash drive with Windows to install the operating system from a flash drive? Create bootable USB flash drive with the Windows operating system you can use various programs specifically designed for this.
Now you will learn how to create a bootable USB flash drive to install the Windows operating system using the free Windows programs 7 USB/DVD Download Tools.
As the name of the program suggests, it is designed for recording to an external USB drive or DVD disk of the Windows 7 operating system. This program also allows you to create a bootable USB flash drive with the Windows 8 operating system.
Why might you need such a bootable flash drive? Most netbooks and some laptops do not have an optical DVD drive. In the absence of a DVD drive, these devices have a pre-installed Windows operating system.
In the event that you need to reinstall the operating system, or install a different edition of the operating system, netbook users will have to buy a rather expensive external DVD drive. Using a disk with Windows can be done if the operating system for some reason does not boot on the computer.
The way out of this situation is to install the operating system from an external USB drive.
In this way you can install the operating system on regular computer. You can create a bootable USB flash drive with Windows 7, or a bootable USB flash drive with Windows 8.
Installing an operating system from a flash drive is no different from normal installation Windows operating system with optical DVD disk.
Storage advantage boot image operating system is that an external USB drive takes up little space, is it more mobile? and is also resistant to mechanical damage.
If you simply copy files with the Windows operating system to an external drive, you will not be able to create a bootable USB flash drive this way. To create a bootable USB flash drive, you must use a special program.
To create a boot disk with the Windows 7 operating system, you will use the free Windows 7 USB/DVD Download Tools program produced by Microsoft Corporation.
Windows 7 USB/DVD Download Tools works on English language, but it is easy to use and will be understandable to every user.
Owners of netbooks that do not have an optical DVD drive will need to copy ISO image with the operating system on the hard drive of your netbook, in order to be able to write this image to a flash drive.
To avoid any problems in the future, it is better to use the original image of the Windows 7 operating system or the image of the Windows 8 operating system to install it on your computer. You can activate the operating system after installation on your computer.
download windows 7 usb dvd download tools
After downloading the program to your computer, run its installation. The program installation wizard works in English, but this will not cause any difficulties during the installation of Windows 7 USB/DVD Download Tools.
Bootable USB flash drive in Windows 7 USB/DVD Download Tools
After installing the Windows 7 USB/DVD Download Tools program on your computer, you will need to launch the program from the program shortcut on the Desktop or from the Start menu. Before starting the program, you need to insert the USB flash drive into the USB connector of your computer.
The flash drive will be formatted using Windows 7 USB/DVD Download Tools. Before formatting, in order not to lose the files on the USB drive, they will need to be moved to another location, otherwise they will be lost after the formatting process is completed.
The entire process of recording an operating system image occurs in several stages and takes four steps.
In the first step, you need to click on the “Browse” button. In the Explorer window that opens, you must specify the path to the ISO image with the Windows 7 or Windows 8 operating system.
In this example, I have selected a disk with an image of the Windows 7 SP1 Maximum 32-bit operating system, which is located on the external hard drive “K:”. After selecting the operating system image, you must click on the “Next” button.
In the second step, you need to select an external USB drive. The program can transfer operating system installation files to a DVD disc. In this case, when choosing optical drive DVD, the program will write the operating system image to a DVD disc.
After USB selection drive, click on the “USB device” button.
In the third step, the program detects the connected external USB drive. If several are connected external drives, then select from them the one on which you will record the operating system image. After this, you will need to click on the “Begin copying” button.
Now the fourth step of the program begins. Windows 7 USB/DVD Download Tools formats the USB drive and then writes an image of the Windows 7 operating system.
The operating system image recording time depends on the power of your computer.
The Windows 7 USB/DVD Download Tools window appears with a message indicating that the process of recording the operating system image has completed. A bootable USB flash drive with an image of the Windows operating system has been created.
In this case, recording an image of the Windows 7 SP1 Maximum 32-bit operating system took me 12 minutes with antivirus enabled.
Now you need to exit the program and then open the USB drive. After opening the flash drive, you will see the recorded files of the Windows 7 operating system on your removable drive.
To install the Windows 7 operating system, or the Windows 8 operating system, you need to insert a flash drive into the USB connector of your computer.
After this, you should turn on the computer. At the very beginning of the boot, you will need to enter the “BIOS” (by pressing the “Delete” key on the keyboard or another one, which is indicated at the bottom of the monitor screen when the logo starts motherboard your computer). In the BIOS settings you will need to set the boot priority from a USB drive.
After this, the process of installing the Windows operating system on the computer begins. The process of installing the operating system is exactly the same as from an optical DVD.
Conclusions of the article
Windows 7 USB/DVD Download Tools allows you to quickly and easily create a bootable USB flash drive for the Windows operating system.
Creating a bootable USB flash drive in Windows 7 USB/DVD Download Tools (video)
Make a bootable USB flash drive with Windows 7
Where to download the Windows 7 image - watch the video below
Very often when reinstalling windows A bootable USB flash drive with Windows 7 is required. How to do it? The process itself is not complicated, but let's try to figure it out.
Here we will describe 2 very different ways method in order to create a bootable USB flash drive from an iso image.
We will analyze everything from beginning to end, we will try to clarify all the details of creating a bootable installation flash drive with Windows 7
We also recommend reading the article on how to properly install Windows from a flash drive; sooner or later it may come in handy. All programs used here work perfectly under Windows 7, 8, 10.
The 2nd method is also very noteworthy; with it we will make a bootable Windows 7 flash drive without any programs, using the Windows command line, although it is noticeably more complicated.
It's important to keep in mind that usb ports should be fine (or at least one of them we need). The fact is that if we use a faulty USB, then there may simply be a loss of contact and nothing may work out. Plus, of course, the flash drive should also be in order, in general, keep this in mind.
Original Windows 7 images for flash drive here: http://nnm-club.me/forum/viewforum.php?f=504
Let us clarify the following points when creating a bootable USB flash drive with Windows 7:
- First we need to find a windows iso image(to do this, in any search engine we write - download Windows 7 torrent, download one of the proposed options using the free torrent program. However, do not forget that you have a good antivirus, plus you can download only from trusted sites, ask your friends and acquaintances about such ). We will assume that we have found
- Let's move on to the flash drive, we will completely clear it, so copy all important data from it in advance
- Also, don’t forget about the size of the flash drive.. You need at least four GB, although this is not more correct smaller size iso image
How to make a bootable USB flash drive for Windows 7-10? Step-by-step instruction
Now let's prepare the flash drive, for this we need to format it. We do it like this:
- We go to “My Computer”, find the flash drive we need there
- Click on it right click mice
- Select "Format"
- In the window that appears, you can also check the box for “Quick, clearing only the table of contents” - this will be quite enough in most cases
- That’s it, click “Start”, an additional warning may appear, we agree
- We wait for the process to complete (usually no more than a minute)
- When finished, the flash drive is ready for further actions, it's completely empty
If you have any questions with formatting or would like to know more about this important and useful process for storage devices, we recommend that you view the corresponding section. In which, by the way, you can also select a program for formatting a flash drive if it does not want to succumb to this process in a standard way(as described above), plus using additional programs formatting a flash drive, you can improve its technical condition.
Now we are almost close to the process of creating a bootable USB flash drive with Windows 7, for this we will consider a very interesting and simple program .
Download the original ISO image of Windows 7
The simplest, most convenient and free program to solve our problem is Windows 7 USB/DVD Download Tool
Very convenient, bootable fleshka is done in just 4 clicks, and it can also be made into a boot disk.
Or you can do it from the official website using this direct link http://wudt.codeplex.com/ (copy, paste into address bar browser and press enter).
The system also requires Microsoft .NET Framework_Online_Setup (completely free, online downloader, which means the Internet must be turned on), usually this utility is already installed in different windows builds. Actually it's official application from Microsoft, it is also important for the operation of other programs and games.
And so, you downloaded Windows 7 USB/DVD Download Tool. Now install it.
Open the program. We see this window.
Click on “Browse” and look for the Windows iso image we need on the computer.
Now if you specified an iso image, click “Next”. Now click on “USB device”.
Here we click on “Begin copying”.
And so the recording process began Windows iso image 7 per flash drive. We are waiting for the end.
The Windows 7 bootable USB flash drive is ready.
We recommend that you read the article on how to properly install Windows 7 on a netbook. So you will know what to do if the question arises of reinstalling Winows 7 on a netbook, laptop or computer without disk drive.
The second method is not simple. It is interesting for those who do not want to install any additional programs on their computer
This method uses the command Windows string, through which, by the way, you can do many more interesting things.
And so, let's go. We connect the flash drive to the USB port. Please note that a 4 GB flash drive will be used here. Open the command line like this, “Start” - “Run”:
Enter the command “cmd” and press “Enter”:
This is what should appear:
The first command we enter is “diskpart”, a special editor that gives us the ability to manage disks, press “Enter”:
Now we write “list disk” and press “Enter”, thereby getting a list of devices:
Now you need to determine without errors where your flash drive is located, in our case it is “Disk 3”. It most likely will not match yours, just make sure that you have found your flash drive correctly. If you have, for example, a flash drive “Disk 1”, then write it in the line and press “Enter”.
Attention! If you do not correctly identify the flash drive, you can format one of your hard drives and lose all the information on it.
- So, enter “select disk 3″, press “enter”
- The program detects our flash drive
- Now enter “clean”, which will delete files on the flash drive, press “enter”
- Next, enter “create partition primary”, press “enter”
- With this command we created a section
- Now enter “select partition 1”, press “enter”
- Now enter “active”, again “enter”
- Now we need to make the file system format NTFS flash drives formatting it using “format fs=NTFS” or for quick formatting we write “format fs=NTFS QUICK”, press “enter”
- We are waiting for the completion of the formatting process
- All is ready
- We write “assign” and the flash drive will automatically receive a letter, for us it is J
- Upon completion, a window with the flash drive will automatically open
- Now we need to exit using the “Exit” command
- That's it, the bootable USB flash drive has been created, now you need to copy all the files from the installation operating system to it
It is only important to understand that it is not the iso image that should be copied in one file, but all the folders that are included in this iso image. To do this, you just need to mount it with some program, for example DAEMON Tools.
That's all, we have looked at the question of how to create a bootable USB flash drive with the Windows 7 operating system.
Hello everyone, I continue the series of articles about bootable USB media. In the last episode I told and showed in four different ways.
There will be a lot of interesting things, so read the article to the end, repeat everything simple steps and you will have your own multiboot usb device. At the end of the article I wrote it down and posted it detailed video lesson on this topic.
Perhaps some of you will think that the information is very chewed, but not all people understand computers, and even more so in matters of creating such portable usb devices.
In today's review:
- Preparations
- Creating a bootable USB flash drive
- Adding Windows XP and Windows 7
- Copying files and utilities
- Adding required programs
- Kaspersky Rescue Disk
- Doctor Web Live CD
- Working with a graphical boot list
- Changing and creating a background image
The last point is optional, since the image will already be by default.
Preparations
The entire process will take a different amount of time for each person. If all the program distributions and images are already at your fingertips, then you will need much less of it. If you are making a bootable or multiboot flash drive for the first time, it can take a lot of time. So get ready and be patient, we'll need it today.
The first question that may arise in your mind is: What kind of flash drive should I buy? To create a regular multiboot flash drive with minimum set 1 Gigabyte of programs should be enough.
If you want to add distributions to it operating systems, programs for working with hard drive, boot shells, utilities for changing passwords and programs for treating your computer from viruses. It is advisable to have it under hand usb storage media with a capacity of 8 GB or more.
In the examples, I will have an 8 GB flash drive, you may have a different size, or even a portable one USB hard disk.
If you have any data on your usb device, then save it somewhere else as we will be formatting our usb storage device.
Create a bootable USB flash drive
To create a multiboot flash drive we will need additional software. There are many programs for creating multiboot devices, but unfortunately most of them are in English.
I decided to use the MultiBoot USB program, which is in Russian. It’s more pleasant to work with; anyone who gets confused or doesn’t understand something can use the instructions for use.
To unpack this archive You will need the 7Zip program. Perhaps your archiver programs will not be able to open some of the archives presented in this review, then I recommend using 7Zip.
After downloading the program, install it on your computer. A “MultiBoot USB” shortcut should appear on your desktop.
We go into it and a small menu opens in front of us with characteristic sound greetings like on Windows, with 7 seven tabs.
Formatting a flash drive
We connect the pre-prepared flash drive to the computer and format it. Go to the first menu item HP USB Disk Storage Format Tool.
The formatting utility starts, under the word Device we indicate our flash drive. I have this Chipsbnk UDisk, volume (7800 MB), you may have a different designation and size.
Choose file system. If you have a flash drive with a capacity of up to 4 gigabytes, you can install
In the Format options, check the box next to Quick Format, thereby indicating quick formatting and click Start.
We are asked, do you really want to start the formatting process, we answer Yes. This process shouldn't take much time.
After the program formats the flash drive, the following HPUSBFW window will appear, in which we click OK.
If an error appears - the device is being used by another program, use normal formatting.
You can also format a portable USB device using Windows. Go to My Computer >>> right-click on the flash drive >>> Format >>> Quick (cleaning table of contents) >>> Start.
Warning window - click OK.
The following window may appear - This disk is being used by another program or process. Click Yes to format it.
This message may appear after the flash drive is already bootable. In the first steps of creating a multi bootable usb there should not be such a window device.
Installing the bootloader
The Grub4Dos Installer 1.1 window appears. In the top Disk Name tab, put a dot next to Disk, indicate the usb device and click Install.
I have two disks on my computer, this is the main 2 terabyte hard drive and an 8 GB flash drive, we select the second one. This program will install the bootloader on our device.
When choosing a disk, do not make a mistake and indicate exactly your flash drive; if you make a mistake and select the main hard drive on which the operating system is installed, then when next switch on Windows computer won't start.
When the operation is complete, the The MBR/BS has been successfully installed window should appear. To continue please click
Adding operating system distributions
Let's move on to the fourth point WinSetup From USB.
I will add two operating systems Windows XP and Windows 7 to the flash drive. You can add others by clicking on the appropriate items.
Windows XP
If you do not have a disk image with the operating system distribution, you can find it yourself on the Internet. I can suggest downloading licensed product Windows XP Prof SP3.
Then we mount the operating system disk image in virtual drive, I'll use the program Daemon Tools, you may have a different one.
We mount Windows XP Home, you can use Windows XP Professional.
Click on WinSetup From USB, which will help us copy the distribution files of the required operating systems.
In the window that appears, select the desired portable usb device and check the box next to Windows 2000/XP/2003 Setup.
Click the browse button (three dots) and select a disk image prepared in advance and already mounted in the virtual drive. Mine is a BD-rom drive (H:), yours may be different.
We are waiting for completion, at the end a small window should appear with the inscription Job done - the work is done.
This process took me about 20 minutes.
Windows 7
If you do not have a disk or image of the seven, then you can download Windows 7 from the link below:
In order to add Windows 7 or Windows 8 to our flash drive, you need to do almost the same as for Windows XP, only when you select Add to USB disk: you need to check the box next to Vista / 7 / Server - 2008 Setup / PE / Recovery ISO .
Select the mounted disk image, start the process and wait for it to complete.
Making a multiboot flash drive
We return to MultiBoot USB and go to the fifth point: Copying files and utilities.
The multiboot flash drive window opens, click the browse button.
Select our portable USB device and click OK.
Then click the Extract button to begin the file copying process.
It turns out small window confirmation of file replacement, replace existing file usbdrive.tag, click Yes for everyone.
We perform the same action for all subsequent files that we are asked to replace.
If you want to see what came out of this, then go to the fourth item WinSetup From USB, click the button
This is what your boot menu should look like.
There are points here that need to be edited a little, and some that need to be removed altogether.
Adding the necessary program images
I decided to remove Symantec Ghost and Windows XPE - full version, since I don’t need them, but we’ll come back to this later.
First of all, let's add an image following programs that are on the list, namely Acronis, Windows XPE - mini version and Windows 7PE - mini version. You can download images of these three programs from the links below:
Now you have downloaded all three images, now we need to replace empty files to working images. To do this, go to the multiboot flash drive, to the folder
Alternatively, you can not delete them, but simply replace them with working images, but for this purpose the downloaded file Acronis Disk Director 11 Acronis Home 2011 - LiveUSB, you need to rename it to Acronis.iso.
I put these three images in advance separate folder so that you can then copy and paste them on a flash drive in a folder
You can also check the box below - Do this for the next two conflicts, thereby all three image files will be replaced with working ones.
ERD Commander
Now I suggest adding it to a multiboot usb device useful program ERD Commander, to change passwords in operating systems of the Windows family.
Why does she need it you ask me? I'll answer you. ERD Commander can be used if you forget your account password Windows entries. Boot with this utility, select the desired operating system and change the password.
Especially for you, I found on the Internet a set of ERD Commander programs that work in Windows XP, Vista, 7 and 8.
After downloading the program image, copy it and paste it onto the flash drive in the folder
Boot disk from Doctor Web
Surely each of you or someone you know has encountered the problem of viruses, various banners and similar hacker things. So, if your operating system does not boot or you cannot log into Windows, then I recommend using boot disk from Doctor Web.
With it, you can boot and scan your computer for viruses, even if you cannot log into Windows normally.
To do this, we need to go to the official website of the Web (I call it Doctor MOM), go to the Download section >>> Treatment utilities >>> Dr.Web Live CD and download the image to your computer. Anti-virus databases are updated daily.
We downloaded the image, okay, now we need to rename it from
Then we also copy the renamed image to the flash drive in the folder
Kaspersky Rescue Disk 10
Everyone has heard that there is Kaspersky anti-virus, some of you have used it or are still using it. I like and am quite satisfied with this antivirus, so I have been using it for more than 5 years.
Kaspersky also has a disk for disaster recovery Windows, like Doctor Web. It's called Kaspersky Rescue Disk 10, it's antivirus databases are updated regularly, so Kaspersky can help you if viruses appear on your computer and logging into the system is not possible.
Download the image, rename it from
We go to the root of the flash drive, create in it new folder and call it
Then copy the renamed image
That's not all. We return to the root of our portable usb device and create a new text document in it.
Rename<Новый текстовый документ.txt>V
Removing the extension<.txt>and press enter.
We are warned that after changing the extension the file may not be accessible, click<Да>.
Working with the graphical boot menu
We've finally added everything necessary programs and file images to our bootable USB flash drive. Now we need to edit the graphical boot menu that will appear when selecting our distributions, programs and utilities.
Go to the flash drive, go to the root, find the file
Just in case, I’ll show you how to open the menu sheet using Notepad if you don’t have Notepad++. Right click on the file
The window Could not be opened appears. this file. We put a point near<Выбор программы из списка установленных программ>and press
If it is not there, then you need to double-click on Other programs or on the right on the small downward pointer.
In the list that appears, find Notepad or WordPad, select it and click OK.
I'm used to working through convenient
A list of all items appears before us, which is displayed in graphic menu our bootable usb device.
First of all, I propose to remove (delete) the unnecessary and unnecessary items mentioned earlier, Symantec Ghost and Windows XPE - full version.
The unnecessary stuff has been removed, now I propose to edit our list in accordance with the contents of our flash drive. Depending on the names of the images on the usb device, you need to rename these names in the menu sheet, that is, make them the same for everything to work.
I will write the names of my images, you may have others, but remember one thing, if you make a mistake in even one letter, required distribution or the program will not start.
Previously, we added operating system distributions Windows systems XP and Windows 7, via the WinSetup From USB utility. We find the corresponding items in our menu and change their names to new ones.
Windows 7 all
In my case I clean
Windows XP Home
Then we rename the name Windows boot loader XP. On this moment in the menu sheet<Установка Microsoft Windows XP SP3 x86 — Русская версия>.
In order to see the name of your image, just go to the folder on the flash drive
There will be a disk image and its name, which we wrote above in the list menu.
ERD Commander
We also inserted an image of the ERD Commander program; we need to add an entry about it to our download list.
To do this, copy the entry from Acronis, change the name to ERD Commander and the two paths of the image file to
Doctor Web
With Doctor Web everything will be a little more complicated. Paste the following text into the sheet menu:
title Dr.Web LiveCD - anti-virus utility
partnew (%@root:~1.3%,3) 0x00 /Boot/drweb.iso
map /Boot/drweb.iso (0xff)
map --hook
cat --skip=85 (0xff)/boot/config | set ID=
kernel (0xff)/boot/vmlinuz %ID% root=/dev/ram0 init=/linuxrc init_opts=4 quiet vga=791 splash=silent,theme:drweb CONSOLE=/dev/tty1 BOOT_LANG=ru_RU.UTF-8
initrd (0xff)/boot/initrd
And place it in any place convenient for you on our download list.
Kaspersky Rescue Disk 10
In order for the Kaspersky utility to work, you also need to insert special text, which I posted below:
title Download Kav Rescue 10 – Disaster Recovery Utility
map (hd0,0)/rescue/rescue.iso (hd32) || map --mem (hd0,0)/rescue/rescue.iso (hd32)
map --hook
root (hd32)
chainloader (hd32)
We also place it in any place we like on the menu list.
So we edited the file
If you want to change the name of the items to your own, then in the line