Connecting the tablet to the TV via smart direct. Correct connection of the tablet to the TV

Virtually every modern TV has the ability to communicate with Android gadgets, such as a smartphone and tablet. However, not every user can view photos or videos on a big screen from their tablet. This is due to the fact that people simply do not know how to connect between two devices.

There are three options for connecting your tablet to your TV:

The simplest of them is to use a miniUSB - HDMI cable

This connection is made using MHL technology, which stands for Mobile High-definition Link. Everything is done simply by connecting the USB side of the wire, naturally, to a smartphone or tablet, the HDMI side is plugged into the TV.

The main thing on TV is to connect through the port next to which there is an MHL inscription. That's all, use the remote control to select the TV receiver to show the picture from HDMI and you can enjoy the result.

The advantages of this method: there is no delay between the image on the device and the TV screen.

Minus: if you get a call while watching a movie, you will have to jump up from the couch and rush to the TV to answer the call.

To prevent this from happening, you can connect to TV over the air, without wires

Connect your tablet to your TV via WiFi. To do this, you will need the network itself, a TV and tablet, access to the router settings, as well as an application from the TV manufacturer. The latter can be easily found on Google Play. In order to connect your tablet and TV, you need both devices to be connected to the network.

After this, you need to make sure that the UpnP data transfer mode is enabled on the router, and that firewalls are not blocking local traffic between devices. That's all.

By launching a free application from the TV manufacturer on your Android device, the devices, if all conditions are met, will independently find each other. Now you can use your tablet and smartphone as a remote control and view content from the gadget on your TV.

The only disadvantage of this connection method is a small delay between the image on the two gadgets.

Making over-the-air connections even easier

Starting from Android 4.2, the system provides data transfer to the TV using Wi-Fi Miracast technology. Many manufacturers of smartphones and tablets diligently use this function.

Their colleagues from the world of TV production are not lagging behind. The essence of the technology is that you can transfer images from your gadget directly to your TV via Wi-Fi, bypassing the router. The principle of operation is largely similar to connecting Bluetooth devices.

The search for new devices is activated on the TV and tablet. As soon as the TV and Android find each other, you allow the connection, after which you can look, for example, on a Samsung smart TV, what the smartphone screen shows. The only disadvantage of this connection method is the same as when using regular Wi-Fi - the picture is a little behind.

Sometimes the size of the tablet screen does not allow you to fully enjoy viewing photos or videos. Therefore, users are seriously thinking about connecting the device to a TV and displaying the image on a large display. How to do it? What will you need for this? Let's find out and find the answer to the question of how to connect a tablet to a TV.

There are several ways to connect your tablet to your TV. Therefore, we will briefly talk about each of them:

How to connect a tablet to a TV via USB?

Let us note right away that connecting a tablet and a TV device via a USB interface is far from the optimal option. Therefore, this connection method is acceptable only if it is not possible to establish a connection via HDMI, Wi-Fi, etc. As we noted above, a USB connection does not allow you to “clone” the gadget’s display, and, therefore, display gameplay, web browser pages or media files will not work. You can only display videos and photographs on the TV screen, as well as play audio files stored in the tablet’s memory on the built-in media player.

As for the connection diagram via USB, it is extremely simple:

Take a USB cable and connect one end to a special connector on the TV. It is usually located on the back or side.
The second end of the cord must be plugged into the corresponding socket on the tablet. As a rule, this is a micro-USB connector.
A menu should open on the gadget's display. In it you need to select the “Connect as a storage device” item. If the tablet does not see the new connection, then try adjusting the plugs in each connector and rebooting the device.
Now take the TV remote control. On it you need to find a button responsible for selecting the type of external connection. Basically this is the Source (Input) key.
Turn on the TV and click Source. A menu will appear on the screen where you need to select “USB drive”. Moreover, on many TVs this item will be made in the form of a label with an image of a memory card.
Now a list of available logical drives will appear on the big screen. All this is reminiscent of Explorer on a PC. We browse through the folders and find the files we need to play. This completes the connection procedure.

However, you should not expect anything “supernatural” with this type of connection. The USB interface is suitable for standard tasks. Therefore, the tablet will become just a flash drive. B O Only USB with MHL/HDMI support have greater potential. They provide high-definition audio and video transmission from the tablet to the TV, and also allow you to charge your mobile gadget. But not all modern devices have such a standard.

Possible difficulties when connecting via USB

On tablets with Android OS 4.4 and higher, connecting via USB may not work. The fact is that MTP technology is preferred here. As a result, if you decide to connect the gadget to the TV via a USB connector, you will most likely receive a message that the device is not recognized. It may be that the TV will see the folder structure and even display it on the screen, but not a single file will be recognized when you try to open it.

Many will ask, what if we take devices from one manufacturer. For example, Lenovo. Such an experiment was carried out. However, when USB-connecting Lenovo tablets (with different versions of Android) with a TV from the same company, the following happened:

In the first case, the TV was unable to recognize the device at all. The firmware was Android 4.4.
In the second case, the TV was able to identify and display all folders. But they were displayed as empty. The Android version on the tablet was the latest.

What solution to this problem can be proposed? In our opinion, the best option is to buy an HDMI – MicroUSB cable.

Connecting through it will make it possible to work with all devices, regardless of the OS version. Naturally, provided that the TV has a connector of this type.

Hello to all readers of my blog! I want to tell you a big secret about how to turn a small tablet into a device with a wide range of capabilities by connecting it to a TV. In fact, I'll teach you how to turn an old TV into a SMART TV. All you need to do is read the article, choose the appropriate method and go ahead to wonderful transformations. When you learn how to connect your tablet to your TV, you can forever get rid of the extra material costs of paying for cable or satellite broadcasting. You will have another computer at home for the children and a lot of free time for yourself.

There are several main ways to implement an idea, each of which has advantages and disadvantages. Let's take a closer look.

By connecting the tablet with a USB cable to the TV, you will not be able to perform complex tasks on the receiver monitor, play games, or display a web page. But you will be able to view photos and films this way. In fact, a mobile tablet will take on the function of a simple information storage device. This method is good if you need to show files on a large screen to a large audience, but the tablet does not have an HDMI output.

The connection is made according to the following algorithm:

A USB-microUSB cable connects devices to each other.
In the menu on the tablet screen, select “Use as storage”
On the TV remote control, press Source or Input
Select the desired file from the drop-down menu and open it.

When you want to connect your tablet to your TV via a USB cable, but have more options, use MHL technology. Provided that both devices support it, you can get high-quality streaming video output and mirror the image from the tablet display to the TV. It is convenient because the tablet device is simultaneously charged. The disadvantages include the need to purchase a special cable and restrictions in accordance with the technical characteristics of the tablet.

Advanced HDMI Method

Connecting via HDMI means using a special connector to establish contacts between the monitor and the tablet. Almost all modern TVs are equipped with this connector, and finding it is not difficult. The slot has a rectangular shape and is signed by the manufacturer. Very often the same output is available on a mobile computer. Take a close look at your devices. If you find sockets on both, feel free to use an HDMI cable to connect.

The method of connecting a tablet to a TV via HDMI has a number of undeniable advantages over others:

Broadcast images in digital quality
Multi-channel sound in stereo mode
High level of compatibility of hdmi versions with each other

In order to establish a connection between the tablet and the TV, you just need to connect the cable to the appropriate connectors on the devices. In most cases, the setup occurs automatically, in 3 - 5 seconds. If this does not happen, you just need to specify the use of an HDMI cable in the settings of your tablet and TV. This is the easiest way to watch movies online on your home TV in high quality.

Very often, expensive tablet models are not equipped with this type of socket. Then you can find a mini- or micro-HDMI connector on the device and purchase the appropriate cable.

Alternative RCA connector

If there is no HDMI connector, transferring the image in analog format using a converter and a special cable will save the situation. The image quality will leave much to be desired; it is preferable to use the technology as a replacement for other methods. To implement it, you need to purchase a special cable for three cylindrical outputs. Each of them is marked with its own color and is responsible for transferring its own file type. Cables with white and red markings transmit sound, while cables with yellow ones transmit image. This is why it is so important to connect the wires to sockets of the appropriate color.

Modern wireless WIFI method

A very convenient way to connect wirelessly Wi-Fi Direct, which opens up great possibilities. Both devices will automatically establish communication with each other using the Miracast protocol. When the TV does not have Wi-Fi technology, but has an HDMI output, you can purchase a special adapter.

The Miracast protocol was written in order to simplify the transfer of information and, at the same time, make the picture better. It allows you to send Full HD video and 5-channel audio wirelessly. The devices themselves will establish communication with each other using the P2P principle without using a router to form a local network.

In the settings of your TV set, find the “Network” tab and go to “Duplicate screen”
In the tablet menu, activate the function of receiving a signal via Wi-Fi
In the context menu of the “Screen” tab, enable screen mirroring (“Wireless monitor”, “Screen mirroring”)
Confirm the connection of the tablet with the TV name that appears
Enjoy viewing the image on the big screen.

Another way to connect several devices into a single network by using a home router is DLNA technology. You can stream various video content throughout your home in real time. You can upgrade your tablet on Android OS by downloading iMediaShare, AirWire or similar programs from Google PLAY.

How to proceed:

connect the TV to the router, and in the settings menu, establish a connection with the device. Enter password;
establish a Wi-Fi connection between the tablet and the router;
recognize all active gadgets by the tablet, in our case the TV, using the downloaded media application;
Allow the TV screen to broadcast the picture by pressing OK with the remote control.

If you already have a smart TV at your disposal, then you can work with the information on the tablet’s disk using the TV remote control. The process is activated according to the reverse principle. You just need to open access to applications on your tablet and work in a mode convenient for you.

Expanding Windows tablet

Few tablet computers run Windows OS, but there are still some. This means that the question of how to connect a tablet on an operating system to a TV via wifi will arise. It is not particularly different from the previous connection method, but it has its own subtleties. Before connecting your tablet to your TV screen, check your user manual to make sure which technologies your device supports. By default, all tablets with Windows preinstalled are equipped with a special output for connecting to TV.

Follow the following instructions:

at the bottom of the gadget, press the button to open the windows menu;
open the Charms panel and select “Devices”;
select the monitor you want to connect to;
select the screen type.

Further work will depend on the type of screen selected:

"PC Screen". Simply displays a picture from the tablet display;
"Duplicate". Mirrors all types of images from the tablet display;
"Extension". Allows the use of two displays simultaneously in active mode;
"Second screen" Transfers the tablet to a USB drive and displays high-quality streaming video on a large monitor.

You can return your pocket computer to its previous operating mode using the Windows + P key combination. The main advantage of the method is the synchronous increase in the image on the TV display.

Bottom line

A pocket tablet computer is a convenient mobile gadget for use on the go or on the street. 8-10 inches of screen provide comfortable work in applications for one user. Watch a video from a corporate party, display demo files on a large panel, or watch a downloaded movie with the whole family conveniently on the big screen. Any novice user can expand the capabilities of the TV. It is enough to use any of the technologies described above.

I hope I helped you understand the matter and use the capabilities of your home appliances to the fullest. If you liked the material, subscribe to blog updates and recommend reading it to your friends. Connecting the tablet to Tricolor TV - .

Bye everyone!

Thank you for your attention! See you again on my blog. Sincerely, Rostislav Kuzmin.

Despite its excellent multimedia qualities, a modern tablet device is still equipped with a relatively small screen. In this connection, watching videos and photographs with many friends (meaning a one-time session) can be somewhat difficult. It is at such moments that the user turns his attention to the “favorable diagonal” of his TV receiver, asking the question: “How to connect the tablet to the TV?” At the same time, there are several more fairly common situations when it may be necessary to expand the “visual” capabilities of the mentioned device. “What do you need to know and how to organize comfortable viewing of multimedia data in all respects?” - issues that require high-quality detailed consideration and often cannot be delayed in their solution.

Before starting the Big Screen project, the user should refer to the technical documentation of the interacting devices. The identity of the supported technology for transmitting video and audio streams can also be determined by external, so to speak, interface characteristics. However, the presence of an HDMI connector does not always determine such a thing as full compatibility. Therefore, to organize “television viewing” it is often necessary to use an additional device, but more on that later...

So, HDMI connection: common methods

Perhaps you, dear reader, thought that the question: “How to connect a tablet to a TV?” not so simple in terms of its resolution. In fact, all your fears are somewhat far-fetched and have nothing to do with the real state of affairs. You will see this for yourself, and literally in a few minutes.

Step No. 1: theoretical acquaintance...

The abbreviation HDMI, which is unfamiliar to many, is an interface through which high-resolution video data is transmitted, as well as multi-channel audio signals. Thanks to such high-quality technology in terms of digital clarity of the transmitted picture and detailed sound, a person can enjoy the realism of the displayed scene on the screen of a tablet or TV.

Step No. 2: double-ended cord and MHL specification

It goes without saying that connecting the tablet to the TV is done using a connecting cable, which, by the way, is not always included with the purchased tablet device (the only exceptions are some branded modifications). However, a special cord almost always comes with a TV that has the previously mentioned connector. Otherwise, you need to buy an HDMI cable. It is worth noting that in the case when the tablet and TV receiver support the MHL specification, the connection process becomes incredibly simple:

It is enough to connect two devices using a special (passive) cable, and the question of how to connect the tablet to the TV is resolved.
Moreover, the implementation of such a “connection” scheme makes it possible to remotely control playback using both the TV remote control and the tablet’s touch panel.

Step No. 3: typical interface differences

It is possible that the television receiver does not have an appropriate USB connector. In this case, you need to use an active MHL adapter. A kind of “digital intermediary” has two interface connectors that are structurally different from each other: on one side of the device there is a traditional HDMI output (for making a TV connection), on the other there is a microUSB input (for transmitting multimedia content from a tablet device ). At the same time, the adapter’s independent power supply from the mains allows you to organize the charging process necessary for the connected tablet.

How to connect a tablet to a TV over the air

The vast majority of modern TV devices are equipped with Smart TV functionality, which includes support for DLNA and UPnP technologies. If you, dear reader, are the happy owner of this kind of computerized TV, you are incredibly lucky! Since the Wi-Fi module integrated into the TV system provides a lot of new “connection” capabilities. However, the lack of one can be compensated for by a connected dongle device...

Method No. 1: DLNA connection and Play Market service

Most tablet computers use the Android operating system. Therefore, the described connection method is aimed specifically at this type of device.

In order to connect your tablet to your TV, you first need to organize a Wi-Fi network using a special router, or so-called router.
After which you will need the appropriate application (the described method involves using Bubble UPnP), which can be downloaded from the Play Market.
When you first launch the above software (without going into too much detail), click the “Next” button several times.
From the list presented on the screen of your device (Playlist), select the displayed active device (TV).
By clicking on the Library tab, you can play any multimedia content from your tablet device.

As you can see, this method of connecting “Tablet to TV” does not require special knowledge and, in general, is very simple to implement.

Method number 2: Miracast technology

This standard allows you to display multimedia content on the TV screen from a tablet device without necessarily using a router. In other words, data transfer is carried out through working (in paired devices) Wi-Fi modules, which must be activated at the time of connection. Of course, the technology mentioned is the prerogative of new TVs. However, the last condition is also relevant for tablets.

Go to the network settings of your Smart TV receiver.
Select - Miracast.
Then switch the slider to “On” mode. The first part of the solution: “How to connect the tablet to the TV?” can be considered completed.
Now go to the settings of the tablet device - “Wireless connection and networks”.
Go to the “Screen” section and activate the item that contains the well-known name Miracast.
The next window should display the activated TV device - move the regulator to the “On” position.
After the TV asks for confirmation to connect your Android device, click “Yes”.
After a few seconds, after a short connection and initialization process, you can begin directly viewing multimedia content.

Afterword

Perhaps the user was looking for an answer to a question that specifically interested him: “How to connect a tablet to a TV via USB?” Alas, this kind of specific solution today can only be implemented when the user connects an external video card. The standard USB connector cannot provide high-quality transmission of a multimedia stream. However, technology does not stand still... Perhaps in a few months or years, the “unreal” connection option will become self-evident. However, this is a matter for the future, and therefore we will be content with known solutions. Stable and realistic pictures on your connected TV screen!

For most people, a tablet has become an excellent analogue to a TV or computer. You can watch movies or listen to music on it. But sometimes you still want to enjoy watching your favorite movie on the big screen.

To connect your tablet to your computer, first disconnect the TV from the power supply. This will ensure your safety.

There are four connection options:

Hdmi.
RCA cable (universal method of connecting a tablet and a TV).
Wifi.

How to connect a tablet to a TV via HDMI

Most tablets are equipped with an HDMI connector. If the tablet did not come with a cable for an HDMI connection, purchase one at the store.

Take an Hdmi cable and connect it to your tablet and TV.
Turn on the TV.

If your tablet does not have an Hdmi connector, use one of the options below.

How to connect a tablet to a TV via USB

This type of connection is usually used when there is no HDMI connection possible.

Tablet as a USB drive

Connect one end of the cable to the TV and the other to the jack on the tablet.

Using the remote control, select “external source” from the menu that appears.

How to connect a tablet to a TV via an RCA connection

It is also called “Tulip”. An excellent alternative to HDMI connection. Its advantage is that all devices support this connection. For this type of connection, an Hdmi-Rca converter is required. The essence of the converter is to convert the signal from analog to digital. It provides the ability to connect even with an outdated model.

Connect the HDMI cable to the converter on one side, to the tablet on the other.

Connect the RCA converter wires to the TV. The red wire is responsible for video, white and yellow for audio quality.

How to connect a tablet to a TV via WI-FI connection

The connection method is via Wi-Fi Direct, one of the easiest connections.

In the TV settings, click on the “network” tab and turn on “Wi-Fi Direct”.

Next, select your device from the list provided. Click “yes” and wait until the connection is completed.

Be sure to unplug the TV.
When playing videos via a TV connection, connect your tablet to a charger. Thanks to this, the gadget will work more productively.

Using the presented options for connecting your tablet to your TV, you will always be able to enjoy a movie from your tablet on the big screen. Also, if the screen breaks, the tablet can be used as a removable storage device, instead of throwing it away.