The speakers on the laptop are quiet. How to make the sound louder on a laptop

If the sound produced by the laptop's built-in speakers is not satisfactory, then the most logical way to improve its quality would be to purchase external speakers. However, you can do without purchasing additional equipment if you use sound improvement programs correctly.

Built-in Windows Tools

Every laptop owner has found themselves in a situation where neither the volume nor the sound quality was enough to comfortably listen to music or watch a movie. This deficiency can be corrected using the built-in tools of the system.

If, after adjusting the speakers, they wheeze during playback, then open the equalizer again and lower the first 2-3 sliders a little. Unfortunately, not all sound cards have such settings. If you don’t see the “Enhancements” tab in the speaker properties, or if there is a tab, but you can’t activate the equalizer, then you won’t be able to improve the sound on your laptop using the built-in tools.

In addition, turning the equalizer to maximum can lead to a decrease in sound quality and rapid failure of the laptop speakers. Therefore, it is not recommended to use this method constantly. It is better to purchase a normal speaker system and connect it to the laptop rather than replacing the laptop’s built-in speakers.

Special software

If the built-in audio tools don't help, try using SRS Audio Essentials. It allows you to improve the sound on your laptop without buying speakers.

Install the program and restart your computer.
Launch SRS Audio Essentials and minimize the window.
Open Control Panel. Select the Small Icons view mode and go to the Sound section.
Make sure the default playback device is set to SRS Audio Essentials speakers.

If another device for sound playback is checked, then right-click on the program’s speakers and click “Set as default.”

After selecting the correct device, close the control panel and return to the program window. Play any audio file to check the sound quality. The program offers four playback modes: music, games, movies, voice. As you select each mode, SRS Audio Essentials automatically selects the optimal sound settings.

The button next to it allows you to switch between devices - external speakers, built-in laptop speakers and headphones. To get optimal sound quality, choose the right built-in speakers and the type of content you're playing.

If the sound is still not satisfactory, click the “Advanced” button. An additional menu with six sliders will appear. Adjust them manually to achieve maximum quality. Usually, for a noticeable improvement, simply choosing the type of device and audio content is enough. The only disadvantage of SRS Audio Essentials is that it is a paid program; you cannot change anything in the demo access.

You can also improve the sound using equalizers built into various media players. If you listen to music through Winamp, AIMP or another player, you can select music styles to which the sound will be adjusted, or control the equalizer manually.

The reason that the sound on the laptop has become quieter may be both software and hardware problems. Most often, updating the sound card drivers helps, but in severe cases you have to change the sound card.

Volume settings

If the sound on your laptop becomes very quiet, the first thing you need to do is check the volume. Left-click on the speaker icon in the system tray. Make sure the slider is at the very top, meaning the volume is set to maximum.

If the sound becomes quieter in a specific application (such as a browser), right-click the speaker icon and open the volume mixer. Set the sliders to the maximum level.

You should also check the playback device properties. Right-click on the speaker and go to the section of the same name. Select the hardware used to play audio and click Properties.

Go to the “Levels” section and make sure the slider is set to its maximum value. There is also a “Balance” button here, which allows you to distribute the sound between several speakers if you use external speakers on your laptop.

To improve the sound, it is recommended to go to the “Advanced Features” tab and enable some effects. When setting up effects, you should rely on your own perception of the sound, so you will have to experiment a little to choose the optimal parameters.

Checking and updating drivers

If adjusting the volume on the laptop does not solve the problem, and the playback device is still very quiet, then check the sound card drivers. Microsoft support recommends uninstalling and reinstalling the sound card software or simply updating it. Drivers should be downloaded from the official website of the laptop manufacturer for a specific model. It is important to correctly specify the version and bitness of the system, otherwise there may be compatibility problems after installation.

If you downloaded the drivers from the manufacturer’s website, you can easily determine which device you need to select in the manager. If you decide to update drivers with automatic search, you will have to do this for all presented devices if you do not know the sound card model.

How to update drivers on a laptop:

You can try installing the sound card software using DriverPack Solution. The driver pack will install a universal driver, but even this in some cases helps solve the problem with sound on a laptop.

Working with programs

If you have a Realtek sound card, then a separate program must be installed on your laptop to manage the audio driver. You can find it in the “Hardware and Sound” section of the control panel under the name “Realtek HD Manager”. The manager combines all Realtek audio drivers, so if the sound becomes quiet, you can increase its volume through this utility.

To make sure that the sound in Realtek Manager is set up correctly, look at parameters such as master volume, surround sound, full-range speakers. Try changing the settings, finding out why it becomes quieter or louder.

Try installing Sound Booster sound management software. According to the developers, the program increases the volume by 500% in browsers, media players and communication applications such as Skype. Sound Booster essentially copies the features of the built-in Windows tool, but for some users, this utility has actually helped increase the volume while maintaining sound quality.

If the sound becomes quieter when playing a movie or music, you need to check the volume settings in your media player. Keep in mind that the sound in an audio or video recording may be initially quiet, so the laptop's sound card may not have anything to do with it. What to do in such a situation? Download a movie or song in normal quality or try to improve the sound using the media player's equalizer.

If we are talking about the sound of a film, then you need to make sure that the laptop has codecs that allow you to correctly reproduce this video format. If there are no problems with AVI playback even when using the built-in Windows player, then the MKV format requires a special player or additional codecs, otherwise you may encounter some problems.

Hardware problems

Unfortunately, the reasons why the sound of a laptop becomes uncomfortably quiet are not limited to software problems. In some cases, the user cannot fix anything on his own, because the origins of the failure are in the computer’s hardware. This could be damage to the speakers or sound card, which can only be fixed by replacing the equipment.

Sometimes the audio level in a file is low and the volume may not be sufficient for comfortable listening. The volume may be low only on headphones or only when playing through the internal speakers. In any case, if there is a need to raise the volume to a comfortable level, how can this be done? In all of the above cases, it is assumed that the audio equipment of the laptop is in full working order.

The first thing you need to do to increase the volume on your laptop is check the volume level via the tray icon. Through this icon you can open additional items in the “audio” section if you click on the speaker picture at the top and check all the settings, especially in the “levels” item.

Second. Through the control panel, find the “sound” section, there we find the properties of our playback device. In the “additional features” section in paragraph "Volume Leveling" check the box and check the volume level on the desired file.

Third . Connect external speakers with a built-in amplifier (as for a computer).

Fourth. Install audio codecs from the K-Lite-Codec package, this package can be easily downloaded from the official website and just run the exe file. Along with the codecs, it will be installed and Media Player Classic. Run the file with quiet sound on Media Player Classic and see the section Play → Filter → ffdshow audio decoder. And here we find the item (on the left) Volume and you need to click on it with the left mouse button. Then a window with a volume control will open, adjust the volume as you need.

How to adjust sound on a laptop using a player. In Media Player Classic, you can right-click on areas of the video being played and select audio. There will be an options item, and move the “boost” control to the desired level.

Fifth. You can try opening the mixer in the volume settings from the tray. There, select speakers → enhancements → equalizer and when the equalizer opens, move the sliders up and save this position as a setting. But sometimes in equalizer menu It is not possible to adjust frequencies, but you can only select preset settings.

Sixth. As in step five, go to the improvement settings and check the boxes points equalizer, virtual sound and loudness compensation. This may increase the sound.

Seventh. As in point five, go to speaker sound enhancements and check the box only for point loudspeaker(the rest are empty), and mark on top "disable all sound effects". Then click “apply” and “ok”.

Eighth. Try to deliver VLC player and turn on the desired file on it and increase the volume through the settings.

Ninth. We use a program to increase the volume on a laptop. Install Letasoft Sound Booster, which will increase the volume 5 times on any applications, including players. Unlike VLC and Media Player Classic, which control the volume of only the files played on them.

Keep in mind that too much volume may damage the built-in speakers. First, interference will appear in the form of rattling, and then the built-in speakers will stop working completely.

Instructions

Download SRS Audio Essentials from the link in the Resources section of this article. Install the program. After installation the program automatically and demo sound. Minimize the SRS Audio Essentials window.

Click the "Start" button, select "Control Panel". Double-click Sounds and Audio Devices in Windows XP or Sound in Windows Vista and Windows 7. You may have to click the Classic View or View: Small Icons button to see the option.

Make sure your default audio device is set to: SRS Labs Audio Essentials. If so, the program is installed correctly. Close the control panel window and return to the SRS Audio Essentials window.

Turn on your audio player, select a music file and start playing it to check the sound quality.

Click on the menu next to the Content option and select Music. This optimizes the sound according to the type of content you are playing. In addition to music, you can select Movie, Games and Voice.

Click the button next to the Auto Tech option to open the Technology menu. Select WOW HD from the drop-down menu. WOW HD optimizes stereo audio for playback on dual-channel systems such as laptops and headphones.

Click the Advanced Controls button to configure WOW HD settings. These settings allow you to adjust the level as well as the size of the stereo field to improve the sound. After this, the sound quality of the laptop increases significantly.

Sources:

SRS Audio Essentials Description and Download Page

Music is truly a wonderful resource for recuperation and relaxation. With the help of music, we can create the mood we want - we can get in the mood for energetic action and relax perfectly after a hard day at work. In order to maximize the pleasure of listening to your favorite music, we can improve its sound.

Instructions

To change the volume of a track, you can change the volume to computer, and change the volume of the track itself. To do this you need to use a music editor. Normalize the track's audio level to the level you want and save.

Video on the topic

A game running on a computer is not always enjoyable for the player. Default settings affect video quality, sound transmission and other factors that affect the overall attractiveness games.

You will need

Computer, computer game.

Instructions

Once you install a game on your PC, you can set certain parameters for it that will affect games and gameplay. These parameters can be configured directly in the interface of the running application. So what do you need to do to improve quality games?

First of all, launch the game with permissions. To do this, right-click on the shortcut games, then select “Run as”. A window will appear in which you need to opposite the “Administrator” user. After selecting the administrator, click "OK" and wait for it to launch games.

Once the main menu becomes available to you games, you need to go to the settings section by clicking on the corresponding entry. Once here, you will see sections such as: “Settings”, “Settings”, “Settings”. If the sound settings have little to interest you, then the video settings deserve special attention.

Go to the "Video Settings" section. In this section you need to set all indicators to . You can also set the desired resolution for games. After all changes, save the settings. The game will automatically reboot, after which you will be able to play with higher quality video accompaniment.

Video on the topic

The absence of , as in desktop computers, is almost always a consequence of its incorrect configuration. The reason may lie in either a banal volume adjustment or in setting up the functions of the sound card. To get sound back, you need to perform a number of settings on your laptop.

Instructions

If the problem is not resolved, use the standard mixer - a Windows utility for adjusting sound settings, in most cases this will be the Realtek AC97 Audio panel. The mixer has a variety of sliders designed to adjust volume, balance, and frequencies. Here you need to pay attention to the Mute All checkbox; it must be cleared. If there is no sound from certain devices, such as Microphone, CD or DVD, you need to adjust the corresponding sliders.

Sources:

how to fix sound on computer

The Windows Vista operating system provides many options for changing various settings so that each user can tailor the interface to work in the way that suits them best. In particular, this concerns the settings sound and selection of individual sound effects to accompany events.

Instructions

Each Windows Vista user has his own specific way of working with a computer. Therefore, the policy of this operating system is to flexibly configure parameters, which allows you to more individually build an interface and sound for work, thereby increasing the efficiency of your work.

For settings sound open Control Panel. This can be done through the Start button. On the panel, go to the “Hardware and Sound” section.

In the window that opens, you will see all the devices used while the system is running. Find the “Sound” section, it contains three subsections: “Adjusting volume”, “Changing system sounds” and “Managing sound devices”.

In the “Volume” window, which appears when you select the first subsection, there are two controls by default sound. The first one, called “Device”, is responsible for playback sound through speakers or headphones. The second, “Windows Sounds,” controls the volume of system sounds that accompany various events. This setting can also be accessed from the bottom right of the screen on the taskbar.

The “Change system sounds” subsection controls the settings of Windows sound effects. By default there is a standard sound scheme, which can be changed. To do this, on the “Sounds” tab, select the desired line from the “Program events” list, then the desired melody from the “Sounds” drop-down list.

You can add your own sound files using the Browse button. The setting also provides the opportunity to listen to the selected recording by clicking the “Check” button. In addition to the standard scheme sound Vista provides a complete absence of sound, which can be set by selecting the “No” scheme. sound" When you have finished changing the settings, click Apply and close the window.

The third subsection is called “Managing audio devices.” Here, on the Playback or Recording tabs, you can configure new audio devices or change the settings of existing ones. To do this, select a device from the list and click “Properties”. Changed parameters can be checked using the “Configure” command. When finished, click “Apply” for the new settings to take effect.

All the best to everyone!

From my own experience, I can say that users most often encounter the problem of quiet sound when reinstalling Windows OS (less often when replacing equipment with new ones).

In general, there is a quiet difference: if you turn up the volume to 100%, and the sound is barely audible, then the problem is obvious, but if you expect the volume from a budget laptop to be like music. center - no comments here, my article is unlikely to help you.

In this article I want to give several reasons why the sound may deteriorate (crackling, grinding) and the volume may decrease. In general, I will give tips on increasing the volume. So...

Causes of quiet sound. How to amplify the sound!

1) “Fine” sound tuning: loudness compensation and communication

Now about something more interesting - about communication...

There is such an option in Windows as “communication” - the point is that “smart” Windows reduces the volume when using the computer for conversations (i.e., as if it does a plus for you - so that you can hear the interlocutor better). But it happens that this option works very poorly - and it always reduces the sound, and not just during conversations...

To check this: click on sound icon in the tray (next to the clock) and open the “Sounds” link (see screenshot below). Then open the tab "Connection" and set the slider "no action required" (see point 2-3 on the screen below). Save the settings and restart your computer (the last step is mandatory!). Then test what the volume is.

A few words about loudness compensation

There is another option in Windows that can significantly affect the volume. We're talking about subtleness - special option to eliminate loudness differences taking into account the peculiarities of human perception. If you have problems with quiet sound, I recommend this enable option .

To do this you need to go to settings "SOUND", open tab "Play" , then select your playback source (speakers, headphones) and go to them properties (see screenshot below, arrow 1-2).

Then open the "Improvements" tab and in the properties find the option "Loudness of Compensation" - turn it on, save the settings and check the sound quality again (by the way, in Windows 8.1 this option is called a little differently - “Advanced features/volume equalization”).

Loudness compensation

2) Checking connectors and wires

One of the most common causes of sound distortion, noise, crackling, and decreased volume is poor contact between the speakers of the speakers (headphones) and the computer sound card.

This most often occurs due to “broken” connectors and plugs, as well as damage to the wire insulation (an example of a torn headphone wire is shown in the photo below). If such defects appear, I recommend replacing the wire (or re-soldering it, if you have such experience...).

Broken headphone wire

In general, a wire tear may not be “visible” - i.e. the braid on top will be unharmed, while the copper core inside will be damaged. Try to twist the wire, and if the sound disappears, then appears, distortions occur - the problem is obvious.

You can also check your headphones (speakers) by connecting them to another PC (tablet, music center, etc.). If the problem is related to the connectors on the sound card, then either repair it or use an external sound card. Now, for example, there are such “babies” the size of a regular flash drive, while many of them can produce sound quality no worse than built-in sound cards.

3) Checking and updating drivers

Drivers are to blame for every 3-4th sound problem! More precisely, their absence, or the wrong version for a given OS.

In general, most often, if there are problems with the sound driver, there is no sound at all (I apologize for the tautology). But it happens that there was (for example) Windows 7 - and then it was updated to Winodws 8/10. According to my observations, after such an update, there are problems with sound...

In Device Manager, open the tab "Sound, gaming and video devices" . This tab should display your sound card (for example, in the screenshot below - Realtek High Definition Audio).

If instead the tab is empty, or you see the “Unknown device” icon with a question mark, then there is no driver.

Important! If you have problems with audio drivers, I recommend reading the following article:

To update the driver on Windows - just right-click on the device (for which you are updating drivers), and select from the context menu "Update drivers" (arrow 1-2 on the screenshot below).

For example, the screenshot below shows the program (available from the link above) Driver Booster, with which you can update the sound driver in 1 click... Convenient? Comfortable!

Update audio driver in 1 click!

4) Setting up an audio driver: using Realtek as an example

The volume also depends on the settings of the audio driver (and on the version of the driver itself, but this was discussed a little higher. I propose to consider the settings based on one of the most popular drivers - Realtek...

4.1 Device selection

When you connect a device to the input of a sound card, as a rule, a message from the Realtek driver pops up asking you to indicate what kind of device you connected. The volume level also depends on the correct type of device.

In some cases, forced switching of the device type helps: from headphones to speakers (or vice versa). Try both options.

Note: to open the window for selecting the type of device to be connected, try removing the plug from the speakers (headphones) from the sound card and inserting it again.

4.2 Adjusting the playback volume level

In the Realtek sound card control panel there are several volume sliders (something like a mixer in Windows). For example, if your Front slider is set to 60% (and the speakers are connected to the front side of the system unit), then until you raise it to 100%, the sound will not get louder!

So a simple tip: open the mixer in Realtek and set all the volume sliders (that will be there) to 100%!

Addition! If you have headphones (speakers) connected to the front panel of the system unit, try connecting them to the back side.

If you have weak sound only when watching movies or listening to music, then most likely the problem is in the audio-video codecs (or players).

The advice here is simple: REMOVE completely all codecs from the system and try installing the K-Lite Codec Pack (detailed description here:). Moreover, when installing, be sure to turn on the mode "Lots of stuff", as in the screenshot below. This way you will get all the necessary and modern codecs for today).

How to install codecs correctly...

By the way, pay attention to the VLC player - it is not only good for playing network video, but also for watching video from your hard drive. It has an option by increasing the sound volume up to 125%!

Best codecs (in my opinion) -

10 Free Players for Windows -

6) Programs to enhance volume

Programs to increase volume on a computer -

installed, configured once and it works (starts every time you turn on the computer);
increase the volume up to 500%!
supports all popular programs, games, players, etc.: Skype, ICQ, Windows Media Player, etc.

That's all for me. I hope at least one recommendation works!

Thanks in advance for any additions on the topic. Good luck!