How to set up Wi-Fi (Wi-Fi) on your phone? Step-by-step instruction. Why doesn't my phone connect to WiFi? Why doesn't my smartphone connect to my home WiFi?

There are several ways to connect to Wi-Fi from a mobile phone (Android and iOS) or from a computer. In the instructions, we will also look at what problems you may encounter and how to solve them. We will also consider in detail the issue of setting up a network connection through the interfaces of the router itself and Windows.

How to connect Wi-Fi on your phone

Every modern smartphone It has a Wi-Fi module in its filling. Typically, you can connect your device to Wi-Fi in just a few steps. Use the menu quick access or connect through your phone settings. Learn more about these steps for devices running iOS control and “Android” will be discussed further.

On iPhones

IN modern versions operating system iOS has a quick access menu that can be accessed by swiping up. If your phone automatically connects to your home network, then you can safely turn on Wi-Fi through the lower toolbar. Click on the indicator wireless connection so that it lights up and becomes active. After will happen automatic connection to a well-known network.

If you are connecting for the first time to your home or public network, you must perform the following steps:

Now you know how to connect Wi-Fi on any iOS device.

Possible problems and solutions

There are situations when a phone or tablet does not connect to Wi-Fi. The first and most common problem is a password-protected access point. You need to enter it in the appropriate field when connecting.

If the point does not have a password, but you cannot connect, take the following steps:

check the Internet connection to see if the network is accessible from a computer or other device;
make sure you are close enough to the router;
make sure that automatic IP address distribution is enabled (DHCP function);
reboot the router;
reboot your mobile gadget;
reset your router.

If other devices connect to your wireless network without problems, this means that the problem is with a specific mobile phone. We recommend taking it to service center for diagnostics.

On Android devices

Despite the differences between Android and iOS, fundamentally connecting to Wi-Fi follows the same principle. To access quick menu Swipe down on the unlocked screen, and then tap the corresponding Wi-fi icon.

Users can activate Wi-Fi through settings:

Go to your phone settings.
In the wireless networks section, click on WLAN (or Wi-Fi).
Move the slider to the activated state, and among available networks click on the one you want.
Enter your password if the system prompts you for one.

If you have problems, do similar actions, described in the troubleshooting section for iOS.

If the connection to the router is hidden

When devices are connected to Wi-Fi, a corresponding icon appears at the top. However, in some situations, you cannot connect to a wireless network because it is hidden. The user will not find it in the search list. To connect to a hidden wireless point to access, follow the instructions:

If all parameters are entered correctly, the phone will automatically connect to hidden network. Make sure you are within its coverage area.

When DHCP is disabled

When trying to connect to the router, the user may see a persistent “Obtaining an IP address” message. Each device connected to the router receives its own IP address. DHCP (Dynamic Host Configuration Protocol) is responsible for the function of distributing addresses. It may be disabled on some routers, so you must enable this protocol manually.

To activate DHCP, you need to go to the router settings. How to do this is described in detail in the subsequent paragraph “Access via the web interface”. Once you are in the settings, find the DHCP (or equivalent) section, and then select the Settings sub-item. It should enable the Enable inscription. Click "Save" and reboot your device.

DHCP may be disabled due to a problem in the router. Try full reboot. Press the button on the back of the router that says reset, and then hold it down for more than 5 seconds. Your password settings will be lost, but this will allow you to restore DHCP functionality.

Connecting Wi-Fi on a laptop

If you are connecting to a wireless network via a laptop, follow these steps:

Connecting to the router is quick and easy WPS technology. Using it, you do not have to enter a password on your computer or laptop. To do this, go to point 3 of the previous instructions. As soon as the password entry window appears, find the button on the router that says WPS, and then click on it. The laptop will automatically connect to the network.

WPS is often disabled by software. You can activate it in the router's web settings. Go to the WPS section, and then click the “Enable WPS” button. If necessary, you can add a new device through the web interface by clicking the “Add device” button.

Now you know how to connect to Wi-Fi with a password.

Enabling on the case or using a keyboard shortcut

On some Wi-Fi laptops disabled by hardware. It must be turned on before connecting to a wireless network. The first way is to click special button. Some manufacturers place a similar key on the keyboard or on the side of their devices.

You can also connect your laptop to Wi-Fi using key combinations. On many models for Wi-Fi activation There is a button among the functional ones (F1-F12). It should display the appropriate icon. To activate Wi-Fi, you need to press it together with the Fn key.

This current methods, how to connect your laptop to Wi-Fi using buttons.

Question “How to set up wifi on your phone?” is asked quite often by inexperienced users. In this article I will try to describe as thoroughly as possible all the nuances of this operation. Will be considered various options connections, the main differences between switching on different mobile platforms And additional features. So, next you will learn how to set up wifi on your phone.

Basic information

The abbreviation Wi-Fi stands for Wireless Fidelity; if translated literally, the phrase “wireless precision” is obtained. To date this technology is a standard for many both mobile and stationary devices. Wi-Fi was created in 1991, and since then it has had a huge application, which makes this wireless network rapidly develop. Can be transmitted via Wi-Fi different kinds information that allows users to create personal home network for distributing the Internet from one device. Today, this technology is built into almost all electronic equipment, ranging from mobile devices to washing machines. Below you will find information from which you will learn how to set up wifi on your phone.

Connection

As a rule, mobile devices such as phones are most often connected to a ready-made Wi-Fi network. Therefore, there is no need to make any settings on the device itself. You just need to turn it on and connect to already existing network. You may need to enter secret password, which is set during Connection and wifi installation always possible using standard means the phone itself. But setting up a password and other parameters is done in preparation for using the router. And we will talk about this further.

Preparation

A router, or in other words, a router, is a device that allows you to transmit signals through wi-fi network. It also happens local equipment, without the ability to support wireless technologies. Parameters such as network password, a certain amount of connected devices, limiting incoming and outgoing traffic are set exactly when setting up the router. In some cases, this process can be particularly difficult. Especially when there is no “setup wizard” application. Giving precise instructions does not make sense, since the setup process depends on the device model. If you do not have experience in this matter, then it is better to entrust it to specialists.

Additional features

Some devices on iOS platform and android allow you not only to receive wifi signals, but also to distribute them. In this case, such mobile phones turn into an access point. Such wifi phone must have its own source for connecting to the Internet, for example 3G or GRPS. Setting up a password and other parameters is done through mobile device. Most often, such a function in a phone is referred to as “modem mode”. But in different software the name may vary.

Conclusion

Wi-Fi network is a really useful development. After all, it allows you to get rid of constantly tangled wires that always get in the way. I hope you understood from this article how to set up wifi on your phone.

Even though it's common now computer literacy, yet not everyone can solve many difficulties with technology. If you are interested in how to connect your phone to a computer via WiFi, then you should read the information in this article.

This procedure is simple. The main thing is that there is a WiFi module available. If it is on your computer, then you can connect other devices to it, for example, a tablet, smartphone or laptop.

Definition

What is WiFi? This wireless system, providing access to the Internet. It uses radio channels to transmit data. But for this system to work, an access point is needed. In homes for this purpose, a router is often installed, which provides constant access to the Global Network within the premises.

WiFi counts convenient function, because thanks to it you can use the network from several devices, and not from one, as happens with wired Internet.

Where to begin?

Before you find out via WiFi, you should understand what such a Network will be used for, since for normal synchronization of a mobile phone with a PC and gaining access to the Internet, they are used different methods. Last method is more complex. But using simple tips, you will be able to achieve the desired goals.

The easiest option

When the user has modern laptop and smartphone, connecting devices is easy and simple. To do this, you need to perform several steps:

Enable the WiFi function on your computer.
Activate the wireless search option.
When your phone indicates a laptop, “exchange” pins.

But this method will not work if the computer does not have the appropriate drivers. To eliminate this drawback, you need to install the software on your laptop. For example, after the AirDroid program assigns an IP address to your smartphone, you should enter it in the address field of the computer. This completes the synchronization.

Sending data when you need to send information to a PC may raise the question of how to connect your phone to your computer via WiFi. And the above method can be used if you need to save multimedia or digital files in the phone’s memory on the hard drive.

When copying phone book on HDD It will not be possible to find out the contents of the container. For this you need special program, the use of which will more fully answer the question of how to connect your phone to a computer via WiFi.

Unlimited Internet

To use wireless technology WiFi, there are 2 options. According to the first, connection to the Network occurs regardless of the router, which is recognized as an access point. If you need to use the second method, then computer hardware is used for this.

Using a router

How to connect your phone to your computer via WiFi for the Internet? For this purpose it is used special software, which must first be downloaded to your smartphone. Only the operating system must be Android. If it is different, then installation of third-party software is required.

As an example, you can take “ES Explorer”. This program is considered free, it is installed through the Play Market:

Once the installation is complete, you need to find the LAN section.
Then you should load the SCAN function.
Then find a local PC.
Click the “Create” button.
And be sure to set the connection parameters.

After this, the user can view files and recordings located in the phone's memory. On a PC you can perform other actions - use computer folders on a mobile device. It should be noted that this is very convenient service when, for example, there is one computer in a family.

Other things to consider

Before connecting, the user needs to configure the local network in advance: enable the network discovery option for different network profiles. You must check the box automatic configuration, and also disable password protection.

There should be no restrictions on smartphone folders. They must be removed so that they can be used freely. If a network is detected, but pages on the network do not open, this most often indicates that the device is not configured correctly.

In general, having a router in the room allows you to use the Internet on any device. You just need to configure them correctly and connect them.

Another method

How to connect your phone to your computer via WiFi without a router? Need to download the system Virtual Router Plus. When it is opened, you should indicate the connection name, enter the password and working network.

The user needs to click the Start Virtual button. After this, he will have access to the Internet, since the laptop will serve as a router. But for this, the computer must be connected to the network using a cord.

Conclusion

After familiarizing yourself with the listed methods, you will understand how to connect your phone to your computer via WiFi. Windows 7 and other versions of the operating system can work using both methods. And thanks to this, users will have access to the Internet on two devices.

Articles and Lifehacks

Accessible Internet means unlimited access to the Internet. With this feature, you can easily and comfortably connect your mobile phone to a wireless network (and find out any information - for example,). To carry out this process, you will need a mobile device that supports Wi-Fi communications. How to connect WiFi on your phone? To do this, we offer affordable and clear instructions.

Instructions “How to connect WiFi on your phone”

Not all Cell phones support Wi-Fi connection, in such cases, you can buy a special device that will provide access to the Network using your phone. Although these days many smartphones from mid-level to top-end devices have this feature. Smartphones on the market since 2008 are equipped with Wi-Fi support. Buying new phone, you just need to make sure that such a function exists in the device.

So, you need to enter the main “Settings” section, then go to the “Wireless Network” item and click on the Wi-Fi icon. The wireless network function is enabled. Although before this you need to select an access point, Settings - Preferences - Default APN. Search mode is selected wireless networks, for example, Search for WLAN. The results must be saved in the settings.

TO mobile Internet You can also connect via your home router. To do this in address bar browser enters the site URL and launches automatic search wireless networks. After selecting the appropriate one, a password is entered to gain access to the network, and the selected page will begin to load. Remember, you cannot connect to unknown access points; to connect you must obtain permission from the owners. To free Wifi is better connect only inside the premises where such a service is offered.

How to connect Free WiFi on your phone?

By using mobile device you can also connect to Wi-Fi Free, which is free service. Most often, this type of service is offered in public places, for example, in Internet cafes. We launch the built-in browser on the phone, then activate the search mode for wireless networks. The appropriate Wi-Fi Free is selected from the proposed list. This access usually does not require a password. You can immediately enter the desired resource address. You will be automatically redirected to the access page. Go to the end of the page and click on the button located at the bottom. After receiving the connection message, without closing the browser, launch it through Opera Mini or another application. Now you can start working on the Internet. In such operations, it is better to use a multifunctional device, which will make the user’s task much easier. And if

The instructions in the article are suitable for those who are connecting Wi-Fi on a phone or tablet for the first time, or have simply forgotten how to do it. Not every user can figure this out on their own. I will help you solve this problem on phones with iOS system (iPhone) and Android ( rest).

To connect you will need. If the network is not yours ( for example, at an airport or other establishment), then ask the administration for it. Networks are also free and do not require authorization.

It doesn't matter if you have a tablet or regular phone. Differences between connections can only be in appearance different versions systems The actions are almost the same everywhere and no difficulties should arise.

It all comes down to two steps:

Enable Wi-Fi.
Connect to the network.

Subsequent connections will occur automatically.

Before we start setting up, I want to draw your attention to the list of the most common problems when connected to phones.

Wi-Fi is connected, but the Internet does not work.
It keeps getting an IP address and nothing happens.
Authentication error.
Signal too bad.

I will show their solution in a separate article.

Connection on an Android phone

For example, I took a Samsung GT-P3100 with Android version 4.2.2.

Open top panel by swiping your finger across the screen from the top to the bottom.

Click on the Wi-Fi logo.

The sign began to light up green - this means Wi-Fi is working.

Login is carried out 1 time. Then the connection occurs automatically ( It will be enough to turn on Wi-Fi as shown above).

Find "Settings" and go to it.

Click on "Wi-Fi" to activate it ( if you haven't done so already).

The slider will move and a list will appear available Wi-Fi. Select the appropriate name and enter the password ( if required). The lock means that a password is required, and the number of colored bars indicates the signal quality.

If everything is done correctly and the signal is good, then the Internet should work on the phone.

Be careful, if the password is entered incorrectly, the device will still remember it, but there will be no access to the Internet!

To fix this problem, you need to connect with the correct data and delete the old ones.

To do this, click on the network in which the incorrect password was specified and in the window that appears, click “Forget” as in the image below. Then enter the correct one.

This video demonstrates all the steps above. Perhaps it will be more clear for someone to look at this process in it.

Connection on an iOS phone

On iPhone phones with the system iOS connection It happens a little differently, but overall the differences are minimal.

On the main screen of the phone, you need to open the sliding panel. Swipe from the bottom of the screen to the top.

Now click on Wi-Fi icon to activate the module.

Now it's highlighted and working.

Then you need to connect to the network itself. Go to settings.

Here, find and go to Wi-Fi.

Select the network and confirmation if necessary, so that later you can log in automatically.

Then enter your password.

If you enter it incorrectly, the Internet will not work, but the password will still be remembered. In such a situation, again click on the network you entered when entering and select “Forget” as shown in the image.

If you have any difficulties, you can always ask for help in the comments.

What problems are you having connecting Wi-Fi to your phone?

Poll Options are limited because JavaScript is disabled in your browser.

No problem. Thank you! 100%, 2 vote