Complete disassembly of the apple ipad mini 2 tablet. Self-disassembly of the apple ipad mini tablet

Fair, not overpriced and not underestimated. There should be prices on the Service website. Necessarily! without asterisks, clear and detailed, where technically possible - as accurate and concise as possible.

If spare parts are available, up to 85% of complex repairs can be completed in 1-2 days. Modular repairs require much less time. The website shows the approximate duration of any repair.

Warranty and responsibility

A guarantee must be given for any repairs. Everything is described on the website and in the documents. The guarantee is self-confidence and respect for you. A 3-6 month warranty is good and sufficient. It is needed to check quality and hidden defects that cannot be detected immediately. You see honest and realistic terms (not 3 years), you can be sure that they will help you.

Half the success in Apple repair is the quality and reliability of spare parts, so a good service works directly with suppliers, there are always several reliable channels and your own warehouse with proven spare parts for current models, so you don’t have to waste extra time.

Free diagnostics

This is very important and has already become a rule of good manners for the service center. Diagnostics is the most difficult and important part of the repair, but you don't have to pay a penny for it, even if you don't repair the device based on its results.

Service repairs and delivery

A good service values your time, so it offers free delivery. And for the same reason, repairs are carried out only in the workshop of a service center: they can be done correctly and according to technology only in a prepared place.

Convenient schedule

If the Service works for you, and not for itself, then it is always open! absolutely. The schedule should be convenient to fit in before and after work. Good service works on weekends and holidays. We are waiting for you and working on your devices every day: 9:00 - 21:00

The reputation of professionals consists of several points

Company age and experience

Reliable and experienced service has been known for a long time.
If a company has been on the market for many years and has managed to establish itself as an expert, people turn to it, write about it, and recommend it. We know what we are talking about, since 98% of incoming devices in the service center are restored.
Other service centers trust us and refer complex cases to us.

How many masters in areas

If there are always several engineers waiting for you for each type of equipment, you can be sure:
1. there will be no queue (or it will be minimal) - your device will be taken care of right away.
2. you give your Macbook for repair to an expert in the field of Mac repairs. He knows all the secrets of these devices

Technical literacy

If you ask a question, a specialist should answer it as accurately as possible.
So that you can imagine what exactly you need.
They will try to solve the problem. In most cases, from the description you can understand what happened and how to fix the problem.

These instructions will help you disassemble your iPad mini, but do everything as carefully as possible. The iPad mini has glued parts. If parsing occurs with effort, it means something is going wrong.

We disassemble the iPad mini, to do this you need to remove the glass, to pry the glass off, use guitar picks.
On the iPad mini, all the cables are located at the bottom, so we carefully lift the glass from the top side and fold it back with a slight movement.
There are four mounting screws around the perimeter of the display; unscrew them.
Using the top edge, lift the iPad mini display with a slight movement.
The iPad mini has a metal plate that protects the insides and is held on by 16 screws; they are needed to provide access to the display and glass cables.
The cable protection is held on by three screws; unscrew them to disconnect the cables.
To disconnect the glass cable, you need to detach the display hidden under it.
We snap off the contacts located next to the cable with a plastic tool so as not to damage it.
Removing the touchscreen
The dock connector cable is protected by electrical tape holding the display in the back cover, disconnect the electrical tape and pull out the display.
The iPad mini display has markings, this is what it looks like.
Now, with a slight movement, disconnect the glass.
We also disconnect the battery cable.
We pry up the adhesive layer under the battery and remove the battery with a slight movement.
This is what the battery looks like for an iPad mini.
At the bottom of each speaker is a Bluetooth and Wi-Fi antenna.
All iPad models have one built-in speaker, while the iPad mini has two speakers.
The connector on the back cover is held in place by two hidden screws, and a docking connector is soldered to the motherboard.
The power button and volume button are held in place by several bolts. We remove them so that the brain of this device is available for study.
Now a hairdryer is needed as the motherboard is attached to the back. Use a plastic tool to carefully pry up the motherboard and remove it.
In front of you is a motherboard with a docking connector. It contains the main elements - video chips, memory and audio processor.
As you can see, there is nothing interesting on the back of the board.
We also take a hair dryer and use a plastic tool to disconnect the headphone jack and front camera cable from the body.
Rear camera.
So we disassembled the entire iPad mini.

On one's own? Then use our step-by-step instructions with pictures and videos, and remember the cheat for disassembly. You will need a set of special tools for repairing Apple equipment: a Phillips screwdriver, tweezers and a special spatula. Also, be extremely careful when performing repairs.

Repairing an iPad mini yourself is a very responsible matter that should be approached carefully. You need to be confident in your abilities and understand that you will not do any harm. If there are any doubts, then you better contact a specialist. Each user must take into account the fact that in the course of self-repair of the device, the owner may lose the official warranty from the manufacturer and assumes responsibility for all damage that may occur during self-repair of the equipment.

iPad Mini repair prices

[[!getPriceNTimeTableSingle? &resId=`123` &productId=`8` &tpl=`priceNTimeRow` &tplCaption=`priceCaption` &tplFields=`priceField` ]]

Video instructions for disassembling the iPad Mini

Step-by-step instructions for disassembling the iPad mini

Important! Before starting repair work, be sure to turn off your iPad mini!

Repairing an iPad mini usually begins by removing the touchscreen. To do this, warm up the iPad a little (you can use a hairdryer), pry up the touchscreen with a simple spatula and tilt it from the upper corners below, towards where the “Home” button is located. Be careful, because when working with cables you can damage them. They are short and require a special approach.

Unscrew the 4 screws of the matrix and move it towards the touchscreen.

Remove the 16 screws from the internal protection. The design protects the fragile matrix.

Remove 3 screws from the touchscreen protection, disconnect the touchscreen cable, remove it and the matrix.

Disconnect the battery from the surface of the motherboard. It is important to separate the battery from the device body. A spatula is used for this. When repairing your iPad mini, be very careful and careful.

We get rid of the three speaker screws, as well as the left antenna. At this stage, the antennas are disconnected.

Remove the four screws of the 8-pin connector. Remove the left speaker.

As a rule, the speakers in iPads are connected to the board with a thin adhesive tape. When repairing an iPad mini, it is very important not to damage this adhesive tape, which is very difficult to buy later.

Unscrew the 2 connector bolts. Remove the connector and remove the remaining speaker.

Remove the camera cable protection. Remove it by first disconnecting the cable.

Now disconnect the cable from the front camera. Bend the cable and disconnect the audio cable and screw.

Using a spatula, use a spatula to pick up the small plastic recess with the video camera and disconnect it.

Peel off the audio jack cable from the case, and then disconnect the volume and power button cable from the motherboard.

Remove the board from the device. Before doing this, you should warm up the iPad thoroughly, but do not overheat the device.

Unscrew the 4 bolts from the volume control button cable and the Power button. Remove the buttons by first unsticking the cable.

The question of how to open an iPad at home, that is, disassemble the device, interests many users. There are many instructions on the Internet on how to do this. But not all of them tell the truth about how to properly disassemble the device. Today we will talk about the iPad and how to open the lid on it and, in general, how to navigate the “stuffing”.

If when disassembling Apple smartphones the processes do not differ much depending on the model, then with tablets everything is different. Although the difference is not so significant, there are still nuances that you need to know.

Let’s say that to remove the display of a second iPad, you only need a metal spatula. But in newer tablet models this element is glued. Here you will need a hairdryer to soften the adhesive masses.

Other tools you will need are suction cups for removing glass, Phillips screwdrivers, a plastic spatula, and more.

But let's not get hung up on the little things, let's talk about how to change the back cover on the iPad - how to disconnect it, remove it, etc.

When doing the procedure on the iPad 2, we simply poke the display with a metal spatula. And we lead her around the entire perimeter. In the iPad 4, iPad Air, iPad mini and others, as noted above, everything happens differently than in tablet two. There you will have to work hard to heat the element. But we will consider the operation using the example of the second model.

The element on it can be easily removed from the back of the case. It is important here not to make sudden movements and always remember that the screen is connected to the back with a cable.

When opening the iPad to replace any part (for example, it may be the back cover), proceed with extreme caution, because all parts are very fragile.

So, the tablet is divided into 2 parts. You can start removing the elements that the back cover holds. Further, the process will be the same for the iPad Air, and for the iPad mini, and for other tablet models. There are not very many parts in the main assembly without 3G. The first thing we see is a fairly large battery. It is for the iPad mini and iPad Air, and for all other devices it takes up most of the internal space. And also – unallocated space intended for the 3G module.

A new step would be to remove the display data cable. This element is removed in 2 stages - first of all, the latch is removed, and then the cord itself is removed from the connector.

Removing the "motherboard"

So, the cover for the iPad, or rather, removing it is not a problem. This is easy to do for the iPad mini, and for the Air, and for all other models. But only in more modern devices the process is complicated by the fact that heating of the elements is required. With the second model everything is much simpler. But it is better, of course, to avoid repairing the device altogether and handle it with care. For example, buy a protective case.

It's time to disconnect the motherboard. It is attached to the back of the device using screws. The element is hidden thanks to protective electromagnetic shields that can be removed very easily.

The A 4 processor from Samsung was installed in the configuration of the second tablet. The flash memory element is also not from the Apple company, but from a Korean manufacturer.

In Apple devices until 2012, that is, before the fifth line iPhone, a 30-pin wide connector was used. In the second gadget it is secured with just one single screw. After disconnecting the cord, you will notice that a WiFi/Bluetooth 802.11n board is embedded in the element.

We remove the battery and other elements

The next step will be to remove the battery. It is a lithium-ion cell with a voltage of 3.75 W. This provides it with a fairly high capacity.

After removing the battery, there will only be an antenna and a hole for headphones on the cover. It is located near the company symbol – an apple. To remove the antenna, you will again need the help of a spatula. We did the same in the situation with the display.

Next, remove a few more screws, and the headphone slot and microphone will be disconnected. These elements are connected by a single cable. Interestingly, there is a moisture indicator on the headphone vent. And if the device stops working due to moisture getting inside the case, the company will almost 100% refuse the user warranty repairs. You will have to shell out a round sum to repair your favorite tablet.

As in the situation with smartphones, having disassembled all the elements on the back of the device, let’s move on to removing the monitor from its front side. For this purpose, unscrews many small screws. Afterwards, carefully pry up the display and disconnect it from the plastic frame. It is important to remember here that the elements are glued to each other. Therefore, their separation is carried out with the utmost care. It is important not to harm fragile elements. At this step, disassembling the tablet can be considered complete.

Removing the display from iPad 4

Regarding this tablet model and newer versions, it is not easy to remove the screen from them. This element is adhesive and to remove it you will need a hair dryer and plastic mediators. When heating the display mounting frame, you need to act with extreme care so that the adhesive masses soften. To prevent the screen from re-gluing, we use mediators.

After the adhesive masses have warmed up thoroughly and the mediators have been placed around the entire perimeter, we take suction cups to remove the glass element. Next, we get rid of the screws securing the front to the back and remove the display. Here it is very important not to forget about the trains and not to do anything with sudden movements.

All other actions will differ little from the operation of disassembling the previous version of the tablet. But there are several nuances, let’s look at them in more detail.

Disconnecting the motherboard on the iPad 4

The main differences between the four and previous models are the motherboard and the Lightning connector. The motherboard version for Tablet 4 was developed based on the A6 processor from the fifth iPhone. In earlier iPad models, chips were protected using metal plates. And here the chip is welded.

The four's motherboard also has:

The red chip is A6X with a 2-core processor at 1.4 GHz.
Orange – 16 GB flash memory element.

Regarding Lightning, it first appeared in the fifth smartphone. It replaced the usual connector used by the Apple company in all earlier models of its gadgets.

For increased security, the connector is glued. And not just screwed on. In this regard, to disconnect it you will need a hairdryer to correct the adhesive masses.

That's all the main points. It would seem that it is very easy to carry out the procedure at home, but it is still recommended to do it at home only in extreme cases. In case of any problem, it is better to immediately contact a repair shop. We especially do not recommend delving into the “stuffing” of the device for those who do not have such experience in communicating with technology.

During service, devices often fail. This also applies to Apple gadgets. Although they are famous for their high reliability, they still sometimes break down. In such a situation, there are two options: repair it yourself or take it to a service center. The first option is best used only if you are confident in your skills. The second option is suitable for anyone, especially if the iPad mini is not yet out of warranty.

If you decide to disassemble the tablet yourself, then you need to stock up on the necessary tools and prepare the gadget for disassembly. In order to disassemble the iPad mini you will need: a screwdriver (a clockwise one, or better yet a pentagonal one), a special hair dryer, a piece of plastic (a telephone card will do), small tweezers (eyebrow correction pliers will also work). You can prepare the device itself by simply wiping it and turning it off. Be sure to disconnect the charger if it is connected.

Disassembling the iPad mini

The case is assembled without screws, which will surprise you if you haven't noticed it before. These tablets use glue for fastening. This is where a hairdryer comes in handy. Turn it on and start warming up the screen around the perimeter. Do not enter the main work area; overheating may damage the display.

When the edges of the screen are well heated, the frame will begin to move a little. At this moment, you need to carefully pry it off with the card. Pieces of plastic must be inserted between the body and frame in several places. Next, run the plastic around the entire perimeter.

Having passed the entire perimeter, the frame will move away and can be removed. When the frame is removed, you can unscrew the display. The screws that secure it are hidden under the plugs, there are 16 of them. Look for the plugs and remove them. Set them aside in one pile so that nothing gets lost during assembly. You can put them in a saucer. Now remove the exposed screws. They should also be put in a pile next to the plugs.

It is not possible to remove the matrix right away; it is connected to the board with a cable. First you need to unscrew the metal screen. After you have removed it, you can unscrew the small metal plate. It is attached with three screws and has an irregular shape. Set the screws aside to avoid loss or confusion. Now you need to carefully disconnect the cable using a plastic spatula or card.

Next, a little surprise awaits you in the form of two strips of tape. Gently pick them up with tweezers and peel them off. The display can now be moved to the side. If the breakdown of the gadget is a faulty screen, then replace it with a new one and proceed to assembly. If the Home button is faulty, you can replace it with a working one and start assembling the tablet.

If not, then move on to the next step. The next stage of disassembly is removing the built-in battery. To disconnect it, you need to disconnect the cable and peel off the tape where necessary. Now slide the plastic under the battery and lift it up around the perimeter. It is also attached with glue. Once she has completely moved away, she can be pulled out.

It's time for modules. Bluetooth and Wi-Fi antennas are located at the bottom of the case. They are attached next to the speakers. Here you can also find the touchpad. Lightning The connector is part of the system board and cannot be removed. Be especially careful with it, otherwise if you damage it, you will need to replace the motherboard.

All that remains is the motherboard. It is attached with glue and to remove it, you will have to use a hairdryer again. Take the body in your hand using a pot holder or a cloth folded in several layers. This is necessary so that you can hold the tablet while it heats up; it will be hot. Now, from the back side, heat the place where the motherboard is attached until it comes off.

Now you know how to disassemble a Mini tablet and can replace the broken part with a new one. There is no need to completely disassemble the gadget if the part that has failed is the “Home” button. After replacement, in order to reassemble the device, follow all the steps described above, but in reverse order. Gluing parts can be done by using double-sided tape of different widths. Or you can use one width, gluing it in two rows if necessary.

You can purchase a special iPad repair kit. It does not have a special hairdryer, but it does have a specific pad. It can be heated in the microwave and placed on the edge of the display in order to peel off the frame. When assembling the screen and touch glass, wipe the parts well with a lint-free cloth. It is important that there are no dust particles or fingerprints left between them.

This instruction is not suitable for all Mini models; for example, 4 has a slightly different structure. If you are not sure that you can fix the gadget yourself, it is better to take it to a repair center. Of course, this costs money, but it is better to pay to install a new part than to later pay for a more extensive tablet repair.