How to connect a tablet using wi fi. How to connect a tablet to WiFi: step-by-step instructions

In this short article, you will learn how set up Wi-Fi on an Android tablet

Setting up Wi-Fi on a tablet computer will not be a particular problem, because this entire procedure has been debugged, all the difficulties that could arise have been investigated, and you will receive a complete guide on how to do it. Even the cheapest Chinese ones tablet computers are now equipped with this technology, so you can get desired results its use.

First, we need to install Wi-Fi using a modem or router, which is quite simple to do. To make sure that your modem really knows how to generate Wi-Fi networks, you need to read the instructions or data on the website where they are offered in convenient form. Words like “802.11” or “Wi-Fi” mean that this is the model that suits us. In addition, there will be a special WLAN indicator on the modem itself. Next, we need to connect to the browser and enter the address http://192.168.1.1. We will see a window asking you to enter your username and password. account, that is, from the modem itself. Then follow enough standard procedures, the implementation of which can be called a purely intuitive matter, so you can very easily figure it out.

Connecting the tablet via Wi-Fi

Now we need to connect the tablet via Wi-Fi. To do this, we need to connect our device to the created network. Depending on the Android versions, which is installed on your tablet computer, will depend on the sequence of actions. For example, if you have version 4 or higher, this button is right in the settings menu, where you will need to select the first line. If you have a 3rd generation Android, you will need to go to options, wireless connections, and then select Wi-Fi.

After the computer has performed several basic operations it will show you a list of detected networks, which is really very simple to achieve. You will need to select the network that you just created yourself. The network name will be the same as you named it directly in the SSID field. Now you will again have to enter the password that was created in the PreShared Key field.

Difficulty connecting

This procedure may also have some problems, for example, endlessly obtaining an IP address. Dealing with this complexity is quite simple. It most often occurs when a user connects a tablet computer to the Internet.

To begin with, you should pay attention to the simplest and generally quite obvious causes of this problem. For example, you need to rename the Wi-Fi network using letters from the English alphabet. If the network name contains Russian letters, some tablets cannot connect. In addition, sometimes we are talking about completely banal things, such as the need to reboot the modem. It is this procedure that is required after we have completed the installation of all programs and similar procedures.

Next you need to enable DHCP server, if you haven't already done so. In addition, changing the type of Wi-Fi network encryption often helps. That's enough too simple procedure, which you might have missed. To do this, we need to change the type of protection, which is done in the system security settings. You can try setting other data for some items and try connecting again. Do not forget that you have the opportunity to manually record IP addresses and other parameters, be it the DNS server, which is done in the connection options of the tablet computer. This procedure is also not difficult, but it can be life-saving, although it is worth recognizing that this is, in general, a fallback option.

In this article, using the example of HTC Flyer and Apple iPad describes how to set up WiFi on your tablet. The difference between these two devices is the type of operating system installed on them. In one case it is iOS (iPad), and in the other it is Android (Flyer). Hence the difference in connection to wireless network.

Before that, on the tablet, let’s find out: “What is this?” This is a wireless technology for transmitting information, which in some cases can operate at speeds of up to 150 Mbit/s. This allows you to easily view almost any page from the global web, download files and exchange messages on social networks. Its only drawback is short distance on which it operates. For most modern routers it is a maximum of 10 meters. But this is quite enough for small office or at home, where an alternative to such technology simply does not exist now.

Router

The first step in getting WiFi on your tablet is connecting and configuring the router. First, we choose a place to install it. This could be a table, a shelf, or even a wall (in which case you will need to hammer a couple of dowels into the wall for fastening). The location should be chosen so that there is an incoming wire from the provider and a 220 V outlet nearby. Next, the first of them is connected to the blue connector on the router. The power supply is installed in a power outlet, and its cord is installed in the socket of the router. At this stage, you cannot do without a desktop PC or laptop. They connect to any of the 4 remaining sockets using a separate cord. Turn it on by pressing the corresponding button. After the router has finished loading, go to its settings from the PC. To do this, launch the browser and enter 192.168.1.1. In response, you will need to enter your username and password, which are specified in the documentation for the router. Then in the section called “Wireless Networks” we set the access point name and password. In this case, you need to select the WPA2 encryption type and perform it automatic reboot. Then the PC turns off and the router is ready for use.

Android

Let's look at the example of Flyer from HTC. The tablet has rather modest technical characteristics, but its price is also affordable. Again, its connection algorithm is universal and can be used on various other devices running this OS. The procedure for setting it up in such a situation is as follows. Go to “Applications\Settings\Wireless Networks”. Here we turn it on. At the next stage, we return to “Applications”. We find WiFi utility. Let's launch it. Then we do a scan. In the list of found networks we find the one that was specified in the previous step. Let's connect to it. If necessary, enter the password. Next, launch the browser and work with the Internet.

Apple tablets

Now let's look at how to connect the Apple iPad tablet. There are also later modifications, but the algorithm for them remains unchanged. First, go to “Settings” and select WiFi there. Turn on the adapter. Then in the “Select network” list we find the one that we previously specified at the stage. If necessary, enter the access key. Then close “Settings”. We launch the browser and begin to surf the Internet.

Conclusion

This article uses the HTC Flyer and Apple iPad as an example to describe how to set up WiFi on a tablet. There is nothing complicated in this operation, and anyone can handle it without any problems. So you can safely take it and do it.

Nowadays there is not a single tablet without a Wi-Fi module. The access points themselves are growing like mushrooms. They are found almost everywhere: at home, in cafes, at work. To access the Internet, you need to know how to set up Wi-Fi on your tablet. On this moment there are only three main ones in the world operating systems s: Windows, iOS and Android. The essence of the connection differs little.

Connecting a tablet on Windows 8

Microsoft is a very strong player. The fact that Windows 8 OS appeared on the market is very predictable. True, the system does not yet differ in its functionality and number of programs compared to other operating systems. However, the number of models managed by Microsoft is constantly growing.

So, how to enable Wi-Fi on a Windows 8 device? To do this, you need to call up the menu while on the desktop. As you know, in the new operating system, all main menus (even menus of programs adapted for METRO) are called up on the right side of the display. At the bottom of the menu is the taskbar, where you can see the wireless network icon. In the tree of available connections that opens, select the desired network and connect by touching the corresponding "Connect" button. If the network is not public, you will need to enter a key. In order not to repeat the procedure every time, check the “Automatic connection” checkbox.

Connecting iPad

iOS models have always been distinguished by their simplicity. To set up a wireless network, you need to go to “Settings”, where you need to enable the “Wi-Fi” module by changing the position of the slider. After a few seconds, the module will find available networks. You need to choose the one you need. Networks can be protected, as evidenced by a lock.

Connecting an Android tablet

Most of the models are running the Android system. To enable wireless mode, you need to find the “Options” (“Settings”) icon in the main menu of the device, where the very first item is Wi-Fi. We activate the module by pressing the switch. Now you need to click on the “Wi-Fi” inscription itself: a list of networks available for connection will open. Click on the desired network, after which the device will be authenticated and receive an IP address. When connecting, you can check the “Remember this network” checkbox so that the next time the device connects automatically.

How to find out the security key?

Many people don't know their home key security, and when setting up a wireless network, you will have to enter it on the gadget. Finding your key is very easy. To do this, open your browser (Chrome, Internet Explorer) and in address bar enter 192.168.1.1 to enter your router settings. When prompted for a login and password, you must enter admin in both fields.

Despite the exceptional simplicity of the actions, the problem of connecting an Asus tablet to a wireless network is a fairly common problem today. Of course, this article will seem very simple to many (after all, what is there to connect, right?). And for someone it will be very useful and help solve the problem connecting your Asus tablet to Wi-Fi. After all, having picked up their first tablet PC, not everyone can figure out what’s what the first time. But, nevertheless, connecting the tablet to the Internet is very important, because without it it is, in fact, a completely useless thing, like all modern gadgets.

The instructions below are universal for all Asus tablets. But it is also suitable for any other tablet based on Android OS.

So let's get started. You must have an available Wi-Fi network in your home (or wherever you want to connect to the Internet). If it is protected, you should of course know the password for it. Although the network may be open (in this case you do not need to enter a password). But let's get down to business.

To get started, turn on wireless on your tablet. To do this, in the case of Asus tablets, you need to swipe your finger across the screen from top to bottom. The settings panel will open. Click on the wireless network settings icon.

You will see a switch near the Wi-Fi item. Turn it to the “on” position. After some time (usually a few seconds), the device will find available networks, from which you will need to select the appropriate one.

Then, if the network is password protected, a special window will appear in which, accordingly, you need to enter the password. Enter it to connect to Wi-Fi and click the “Connect” button. If you manage to forget the password for your network, you can look it up in the router settings.

By the way, when connected to a Wi-Fi network on the tablet Asus button“Connect” may not be active even after entering the password. If so, most likely your password is less than 8 characters long. That is, the password must be 8 characters or more long. You can solve this problem simply by changing the password in the router settings.

To see what you are entering there (after all, the password is usually covered with asterisks when entering so that no one can spy on it), you need to check the “Display password” checkbox.

That's all, actually. If you did everything correctly and entered correct password, tablet connect to Wi-Fi.

At the same time in the list available networks(which is in the settings) the words “Connected” will appear next to the name of your network. If in the end you receive an authentication error, you most likely entered the wrong password for accessing the wireless network. Check it and try again.

And on the notification panel at the top an icon will appear that shows the signal strength and two small arrows that “light up” green, when the Internet is used quite intensively.

One of the capabilities that almost all tablets have is an Internet connection: you can learn more about this from the article. Equally important is your device's ability to connect to a Wi-Fi network. It is this point in mastering a new gadget that most often causes the greatest difficulties, and we will dwell on it in more detail.

How to set up Wi-Fi on an Android tablet

In order to set up Wi-Fi on an Android tablet, follow these simple steps:

1. In the tablet settings, turn on the Wi-Fi receiver. To do this, select “Wireless Networks” in the settings menu, and then click on the “Wi-Fi” line.
2. After this, a list of wireless networks available for connection should appear on the screen of your tablet. From them, select the one you need to connect to, and the system will prompt you to enter the network password in the appropriate window.

Most often, no further manipulation is required, and you can use your tablet for your own pleasure. However, if there is a need to further configure the connection, follow the instructions below.

• To access the network settings settings, hold down its name for a few seconds, and when the system prompts you to select an action for this network, select “Change network”.
• Next you will see the settings panel. To configure settings such as gateway and DNS server addresses, select Advanced. In the window that opens, enter the data that was provided to you by your Internet provider in the appropriate lines.

As a rule, there is no need to use the last two points indicated, since the Android OS has a function automatic settings networks and determining its parameters.

How to set up Wi-Fi on an iOS tablet

If you still don't know how to make Wi-Fi on your tablet iOS reality, follow these steps:

1. Open the "Settings" menu and select the "Wi-Fi" line. A window will open, the first line of which will read “Wi-Fi” and a switch. Set the switch to on and your tablet will begin searching for available networks.
2. When the search is completed, a list of available networks will appear below the line, and you will be asked to select one of them to connect to. Select the desired network, enter (if required) the network access key in the window that appears and click “Connect”.
3. If the connection is successful, a Wi-Fi network signal indicator will appear in the upper left corner. To configure a network, click on the arrow to the right of the network name. You will be taken to the Advanced Settings window, where you will be asked to enter the IP Address, Default Gateway, and DNS Address values.

In addition to Wi-Fi connection, many tablets allow connections to the 3G network. To learn more about this, please refer to the article

Tablet computers are becoming increasingly popular today as a means of surfing the web. Users use them to visit social networks, watching online videos, listening to music, communicating via chats and Skype. There are several ways to connect these devices to world wide web: via Wi-Fi, via a 3G module or external 3G modems, using a cable via a computer, etc. Perhaps the most common of them is a connection via Wi-Fi. But from time to time some device owners encounter specific problem in operation: the tablet is connected to wifi, but does not access the Internet.

What does it mean? The tablet connects to wireless Wi-Fi, the connection status looks like “Connected”, an excellent signal, but there is no way to access the Internet. That is, browsers do not open sites, programs and applications that require global access do not work. Of course, there are ways to solve this problem that users should be aware of.

Internet distribution by router

Ways to solve connection problems

Setting up a Wi-Fi router

Since most tablet devices used by users are based on the Android operating system, we'll talk about solving Internet problems with this kind of gadgets.

A problem that tablet computer users encounter when working with Wi-Fi is the appearance of the message “Obtaining an IP address.” The operation of the device stops at this point, and things do not go further. In fact, there are several ways to solve this problem, one of which will certainly help owners of tablet devices.

1. Change Wi-Fi name on the name on English language(there is an opinion that tablets do not connect to networks that have Russian letters in their names)
2. Reboot the modem (this trivial way to solve the problem is often the most effective)
3. Change the data encryption type (in the same place where the user specified the password and network name, you need to change the protection type to some other value).

Changing the encryption type

For all changes to take effect, the router must be rebooted.

Preparing your tablet computer

In general, when setting up a wireless network, automatic receipt these same settings, but sometimes this is not suitable for correct Internet access. In this case, you must manually enter the IP address, gateway and DNS. To do this, you need to perform the following steps.

First, you need to enter the device settings. For tablets with different versions OS Android login the settings may differ, but not so significantly that the user could get confused. Since the device is already connected to a wireless LAN, Wi-Fi will be automatically turned on. To enter the IP address, DNS and gateway, there must be no Wi-Fi connection, so you must disconnect from the access point. Next, you need to enter all the necessary data, and then reconnect to the network. To do this, the user again selects his Wi-Fi, a dialog box opens with the parameters of this network, where you can see data about its security, signal strength and communication speed, as well as a field in which the Wi-Fi password is entered.

1. The user enters the Wi-Fi password (it is the key that was registered in the settings of the modem or router during Wi-Fi installations)
2. You must check the box in front of the word “Advanced” if it is not there, as this is necessary to open additional settings network (the user needs “Proxy server settings” and “IP, DHCP settings”)
3. Next you need to select “DHCP”
4. After this, another tab will appear, select “Custom” on it.

Network setup diagram

It is important to know that if the user has open network without a password, then at the first step there will be no such input field.

After selecting “Custom” you can see the following picture.

“Advanced” item of the “Custom” menu

Here you need to enter the following data: in the IP address field – 192.168.1.7 or 192.168.0.7. The last digit of the IP address can be anything, in this example it is 7, it does not matter, it is important that it is not 1 or 2. The remaining digits must correspond to those through which the user router to which you need to connect is accessible, i.e. those numbers by which the user enters the settings of his router.

It is important to know that if a user tries to register this information on more than one device, then each of them must have a different last digit of the IP address.

Next you need to enter the following information: gateway – 192.168.1.1, network prefix length – 24. Then DNS1 – 77.88.8.8, DNS2 – 77.88.8.1. It can be done differently: DNS1 – 8.8.8.8, DNS2 – 8.8.4.4. Moreover, if it is important for the user to take care of the device’s security, its stability and fast work, or maybe he is setting up a tablet for a child, then it is recommended to indicate safe Yandex DNS. You don’t need to change anything else, all you have to do is click the “Connect” button.

Network IP addresses

After the router is installed, you need to delete all connections that were created on the computer. Instead, specify the connection parameters in the router settings. Traditionally, all this is done on the WAN contribution.

WAN setup

After this, the router will establish a connection to the Internet. Next, you need to delete all connections on the computer, and in the properties “Connection by local network» set automatic IP and DNS.

It is important to know that this is possible if the computer is connected to the router via cable.

Automatic IP and DNS configuration

After specifying all the parameters in the router settings, a connection to the Internet should be established. At the same time, all devices, and not only mobile ones, must connect to it and access the Internet.

Root rights and system update

Sometimes it is quite likely that the cause of the absenteeism problem is tablet device access to the Internet with a correctly working router and Wi-Fi network lies in the fact that the user does not have the superuser rights necessary to interfere with the system. These so-called root rights open up the possibility of editing, deleting and changing system files, and this may well help in solving the problem with the Internet. In this case, he needs to download the desired program and install it on your device. Next, the program starts and to complete this task, you must select “Root device” in the main menu.

Superuser rights settings window

There may also be a reason that it is time for the tablet to update its firmware for a more successful and correct operation, and also to receive additional features and functions. To update the firmware to a later version, you must select Settings - About Tablet PC - System update(Internet access is required for this).

OS update

If the system detects updates for the tablet, it will notify you and offer to install them. Probably with updated version firmware, the tablet will independently cope with the problem of the Internet not working.

Setting up a network connection via Wi-Fi

Over the past few years, tablet computers have become common companions for everyone. modern man. They are compact, easy to use and multitasking. However, the main function that most owners use is, of course, access to the Internet.

You can plunge into the vastness of the Internet using a tablet in two ways: using the service mobile Internet(if your tablet has a SIM card slot) or by connecting to a Wi-Fi wireless network. As a rule, mobile Internet settings are automatically sent cellular company, so there is no point in focusing on this. When connecting to Wi-Fi, things are a little different: it all depends on the level of network security and the specifics of your tablet’s operating system.

So, there are several levels of Wi-Fi network protection. It can be open or closed. If the network is open, then there are no problems - any device can freely connect. If this is a closed, secure network, then the user must enter a password set by the owner of the network. However, sometimes a password is not enough. If in the settings of the router distributing wifi signal, filtering by Mac addresses is enabled, then you can connect to such a network only with the personal permission of the owner. This method protection is usually used only on home networks.

Mac address is unique address device, assigned to it by the manufacturer and does not change under any circumstances (unlike the IP address, which can vary depending on the network to which the device is connected).

Let's give detailed instructions connection to a Wi-Fi network for tablet users of the three most common operating systems: Android, iOS and Windows 8.

Important! Be sure to check that you entered the password correctly, otherwise access will be denied!

How to connect an Android tablet to Wi-Fi

1. First of all, go to the settings menu.
2. In the “Networks” section, activate the Wi-Fi icon and go to the window of available networks. If necessary, click “Search”.
3. After the tablet has found the desired network and it appears in the list, click on its name. Pay attention to the mark under the name of the network: “Protected” or “Unprotected”.
4. If the network is open, or unsecured, then nothing else is required - you are already on the Internet!
5. If this is a secure network, a window will open with a password entry line. Just enter required symbols, having previously learned them from the owner of the access point. Once “Connected” appears under the network name, you can safely use the Internet.

How to connect an iOS tablet to Wi-Fi

1. Click on the “Settings” icon.
2. On the left panel, select the “Wi-Fi” line and move the switch to the active position. This opens a list of available networks.
3. Select the desired network with one touch. In this case, you should also pay attention to the icons to the right of the access point name: the icon in the form of a lock shows that the network is protected.
4. After selecting an access point, a window appears with a field for entering a password. We find out the password from the owner of the network, enter it, and click “Connect”. Ready!

How to connect a Windows 8 tablet to Wi-Fi

1. On the desktop on the taskbar we find an icon in the form of an antenna “ Network connections" This will open a panel on the right with a list of available networks.
2. Find the desired network, select it and click “Connect”.
3. A secure network will require you to provide a password. Enter the desired combination of characters in the window that appears.
4. After “Connected” appears next to the name of the access point, you can use the network.

The iPad can connect to the Internet or via WiFi module or via a 3G module. The 3G module is present in more expensive models, so setting up a connection via WiFi can simply be more profitable.

How to connect a tablet to WiFi (Wi-Fi)? For this you can use regular router. The router must be connected to home network Internet. After that create unique password for Wi-Fi and set up an Internet connection on the router. The password must only contain Latin letters and numbers, the number of characters is from 6 to 8. After you have configured the network, you can connect the router to your provider.

On iPad tablet You can set up a WiFi connection in several points:

• Select Settings
• From the menu you need to select WiFi and switch it to ON
• In the Join a Network list (list of networks), you need to select your wireless network
• If the network is secure, enter your password

After this, the tablet should connect to the Wi-Fi network. The tablet may not support everything WiFi standards(11n, 11g) and not all encryption standards. You may also have to disable geolocation on your tablet.

How to transfer files between tablet and computer via Wi-Fi

If you need to connect your tablet and computer (laptop) via WiFi only to transfer files between each other, then you can do the following. For example, for Android tablet You need to download the On Air program from the Android market.

After launching this program, you will be able to select the ftp mode for transferring files. For your computer you can download and install free ftp manager.

You need to configure this manager (enter your password and login) and then on your computer in the manager window you can see all the tablet files. Before connecting ftp manager You need to select the ftp mode in the On Air program on the tablet, then the connection should occur correctly.

This way you can connect your tablet to Wi-Fi to connect to your computer.