How to make a frame for Office Word. How to easily make a frame in Photoshop around a photo or insert a ready-made one

Quite often there is a need to visually separate an image from the surrounding text on a website and decorate wedding photographs.

There are many applications on the Internet for creating frames, but you can do it in almost any graphic editor. How to make a frame in Photoshop?

Let's look at a few of the simplest methods.

Ways to Create a Frame in Photoshop

Method number 1: stroke

Open a photo in Photoshop and select the image using the keyboard shortcut ctrl+a or using the selection tools by going to the "Edit" menu and clicking on the item " Stroke»:

Select the color, thickness and position of the stroke:

If the outer stroke position is selected, the image size can be reduced using the command " Free transformation", moving the dotted line, or increase the size of your canvas by the desired amount.

Method number 2: frame around the picture as a background effect

Let's assume that the frame we need has a thickness of 2 pixels. If it's open in Photoshop pictures If there is only one layer, it is also the background layer.

Press F7, double-click on the background layer, and when the Layer Style window opens, select the Stroke panel. The “Outside” selector must be changed to “Inside”. Having specified all the parameters you need, click on “OK":

Method number 3: using a brush

In order to make an arbitrary frame for a picture or a separate part of it, you can use a brush. Select with hotkey B brush and specify its thickness:

The frame color will be active in at the moment color. Click the brush in the place where you will start drawing the stroke, hold down shift key and without releasing the button, draw a straight line.

Repeat this action three more times to all sides of the picture, and it will work simple stroke. Unsuccessful actions can be undone using the ctrl+z combination. The end result differs little from the first method, however, you can make such a frame not only around the edges of the image, but also in any part of the picture:

Method number 4: transparent frame

Open the image and duplicate it fo new layer twice using the keyboard shortcut ctrl+j . Turn off the top two layers by clicking on the eye icon next to each:

While on the first layer, select "Filter", "Blur" and " Gaussian Blur" and blur the image:

Then in the “Filter” window, click on “Noise” - “Add noise”. In the layer blending options of layer 2, in the already familiar way, make a one-pixel black or white stroke.

Turn on the visibility of all layers and layer 2, using Free Transform, reduce it along the contour by the required amount.

You will get a frame like this:

By experimenting with layering and blurring, you can create a beautiful and effective photo frame. However, sometimes it is necessary for a photo to have a more complex or thematic frame.

In order not to reinvent the wheel, on the Internet without special effort you can find many different free .psd or .png files into which all you have to do is insert an image. How to do this?

How to insert a photo into a finished frame?

Step #1

Open the downloaded frame and photo in the same Adobe Photoshop project:

Step #2

Using the Move tool, drag the photo into the frame window. In order to synchronize images, in the "Edit" menu, select " Free transformation" and, while holding down the shift key, resize the image to fit the frame and rotate if necessary:

Step #3

In the “Layers” window, place the frame layer higher than the photo layer, as shown in the figure:

The photo is now under the frame.

Step #4

To create an additional three-dimensional effect, you can use “ Blend options» layer with a frame. To do this, click right click mouse and select the appropriate item:

In the “Embossing” section, check the boxes, guided by your taste and preferences:

As a result, you will get a voluminous and realistic image framed.

We hope that this lesson became useful for you!

Good Bad

To make your document look elegant and neat, we recommend adding frames to it. Frames will allow you to highlight your text in a particularly careful way, and the contents of the document will be picturesque, stylish and brightly framed. In this article we will talk about how to work with frames in Word, how to add and remove them.

Frames are an elegant way to decorate your text and make it more readable and digestible. In addition, in this way you can give your document a little charm - after all, with frames, even the “dryest” content will be highlighted and more noticeable.

How to add frames in Word 2003?

In old versions of Word To add a frame, you will have to browse the menus a little. So, open the document you are looking for, in top menu Find the “Format” tab and select the “Borders and Shading” menu item.

In the form that opens, open the “Page” tab, where we mark the width, line type and frame. In addition to this, it is worth specifying which part of the document we are applying the border to. Confirm specified settings by clicking on the “OK” button.

That's all, the frame is ready. As you can see, nothing complicated or extraordinary. However, the result is a stunning custom frame.

How to add a frame in Word 2007, 2010?

In later versions of the text Word editor The algorithm for adding a frame is very similar, and has even become more intuitive. The only difference is that now instead of the top menu you will have to access the feed, but everything works absolutely identically.

Open a text editor and expand the document you need in it. On the ribbon we find the “Page Layout” tab and in the “Page Background” section we turn to the “Page Borders” element.

As a result of such simple and uncomplicated manipulations, the “Borders and Fill” form opens in front of you. Open its “Page” tab. Here we indicate the color of the frame, its width and type. We immediately determine which part of this document a frame should be applied.

After that, everything is ready, the frame is added and flaunted in the margins.

In Word 2010, the procedure is absolutely similar, so we will not dwell on this in detail.

How to add a frame in Word 2013, 2016?

In the next version of Word, the process of adding a frame has undergone some changes. If previously the menu item we needed could be found on the ribbon in the “Page Layout” section, now you can access the corresponding functionality in the “Design” category. Here, in the “Page Background” section, open the “Page Borders” section, and, as in any other versions of Word, set all the necessary parameters for adding a border.

Often the need to format text arises not only as a consequence of the personal initiative of the author of the document. When creating manuals, manuals and preparing creative works, information material is often framed.

The most popular text editor that every PC user is familiar with is MS Word. It is not only convenient and easy to use, but also allows you to create artistically designed works. How to use this editor prepare a colorful postcard or booklet?

How to insert a frame in Word - Word 2003

This version of the editor is currently quite rare, but it is still present on some computers.

• Create a new one text document(Word) or open an existing one.
• On the toolbar, find the “Format” menu and click it.
• In the list that opens, select the “Borders and Fill” item.
• A window will appear in which you are interested in the “Page” tab.
• Now all that remains is to choose appearance and the style of your frame.

Frame type: choose what your frame will be - flat, three-dimensional, with a shadow or artistic (the “Other” item). Set the type of outline - solid or dashed, its color and thickness.

Artistic frame. If you want a more colorful design, use the “Other” frame type. Next, go to the “Drawing” item and, from the options offered in the list, select the one that suits you.

• In the right half of the window you will see a preview of the frame.
• If you are satisfied with everything, click “Ok”.
• The frame is ready.

How to insert a frame in Word – Word 2007, 2010

These versions of the editor are very similar to each other, so the algorithm for creating a frame will be identical.

• Open a text document or create a new one.
• Find the “Page Layout” tab on the toolbar and go to it.
• Among the sections that appear, select the “Page Background” block.
• Next, click on the “Page Borders” icon.
• A window with several tabs will open. To create a frame you need a “Page”.
• Click on it and select the style and color of the frame (in the same way as in the case of the Word 2003 version).
• Evaluate the result in the field on the right.
• Click “Ok”.

How to insert a frame in Word – Word 2013

• Open the finished one Word document or create a new one.
• Find the “Design” tab and click on it.
• Many sections will appear in front of you, among which you select the “Page Background” block.
• Click on the “Page Borders” item.
• The “Borders and Fill” window will open, in which you specify all the parameters for the future frame in the “Pages” tab (in the same way as when working with the Word 2003 version).
• Next, if you are satisfied with the result, click the “Ok” button.

How to insert a frame in Word - scope of parameters

The frame obtained as a result of working with the “Page” tab will appear only on the page that was active during work. If you need to create a similar border on each page of the document, the steps should be as follows:

• Go to the “Borders and Shading” window (how to get there is described above for each version of Word).
• IN right side section, select “Apply to”.
• In the drop-down list below, select the pages on which the frame design will be present.

You can choose not only the style of the frame and its location within the document, but also the boundaries for placing the outline within the page. To do this:

• Go to the “Borders and Shading” window (how to get there is described above for each version of Word).
• If desired, your frame may not have 1 or 2 sides, as well as a top and bottom border. To do this, click on the corresponding icons in the “Sample” section.
• Next, on the right side of the block, select “Options”.
• Click on it.
• You will be taken to a table in which you must, if desired, change the size of the fields and indicate the location of the frame.
• When the changes are completed, click the “Ok” button.

Working with a text editor will not cause any difficulties, and as a result you will get the necessary text framing.

How to make text appear in a frame in Word?

Sometimes we want to highlight some parts of the text in a special way and then we start looking on the Internet for information on how, for example, to highlight a passage with a certain color, how to change the font or add a frame.

Today we will talk about the latter.

There are quite a few ways to do this. Most of them are relevant for all versions Microsoft Word and they are all done as simply as possible.

IN in this case You don’t need to know a lot about the design of this program or even be a more or less advanced user, you just need to follow the instructions given below.

Method No. 1. Standard

In short, this method is to simply select the text, find it in one of the program tabs on top panel paragraph " Borders and Shading» and use it to make a frame around the selected fragment.

In more detail, it all looks like this:

• We select a specific piece of text by left-clicking at the beginning and, without releasing it, at the end.
• After that, go to the “Page Layout” tab in Word 2010 and 2007, to the “Design” tab in Word 2013 and to the “Format” menu in Word 2003.
• Click on the “Page Borders” item in Word 2007, 2010 and 2013 and on the “Borders and Shading” item in Word 2003.

A window that is the same for all versions will open “ Borders and Shading"(only the design of the window itself will differ).

• Go to the tab " Border».

Important: When this window opens, the “Page” tab automatically opens. They have the same interface, but the first one will perform certain actions for a selected piece of text, and the second one will perform certain actions for the entire page.

IN open tab“Border” select the “frame” type.

Click "OK" at the bottom of the window - and you're done.

This is interesting: Try experimenting with the type of frame borders. There is a special section for this, which is called “Type”.

As you can see, there you can select a frame with borders in the form of a dot-dash, dash-dash, and so on. Also in this window you can select the color of the lines, their width and many other parameters.

And the frame itself can be made voluminous, with a shadow, colorless, or made special in other ways.

This window will definitely be useful to people who often work with Word.

Method number 2. Using tables

This method also works in absolutely everyone. Microsoft versions Word does not cause any particular difficulties.

It consists in first creating a table with one cell and one column, writing some text in it, and then simply “adjusting” the size of the table to the size of the text.

In more detail, in Microsoft Word 2007, 2010 and 2013 all this is done as follows:

• Go to the “Insert” tab on the top panel of the program;
• Click the “Table” button;
• We aim at the grid so that only one square is selected. Click on it.

• The 1×1 table we need will appear on the screen.
• Hover the mouse cursor over it, left-click and enter required text.
• We move the mouse cursor over the boundaries of this table, we see that it takes the form of a line with arrows on both sides. We move them in such a way as to reduce the size of the table.

In Microsoft Word 2003 the same thing happens like this:

• On the top panel, select the “Table” menu;
• In the drop-down list, move the cursor to the “Insert” item, then again to “Table”
• A window will open where you need to specify “1” next to the words “Number of columns” and “Number of rows”;
• Further actions are exactly the same - click on the table, insert the desired text there and change its size using the mouse cursor.

In principle, you can create tables in this way in later versions of Microsoft Word, but there are already more convenient way, which was described above.

Method No. 3. Using shapes

As you know, Microsoft Word has the ability to insert all kinds of rectangles, circles, cones, and the like into a document. In all versions the sets of figures are identical.

The essence of the method is to create a regular square and add text to it.

In fact, we are creating the same 1x1 table, only in the form of a picture. IN Microsoft Word 2007, 2010 and 2013 this method implies next steps:

• Go to the “Insert” tab;
• Select the item “Shapes”;
• Select a regular rectangle. While drawing a rectangle, the user can immediately edit its dimensions;
• When the rectangle is placed on the page, right-click on the rectangle and select “Insert text”;
• We write the required text.

IN Microsoft Word 2003 this whole process looks a little different. In this program, the list of shapes is simply located in a different place.

But the figures themselves, as mentioned above, are exactly the same as in later versions. There, to add a rectangle, you need to do the following:

• On the bottom panel, hover your mouse over the “AutoShapes” item.
• In the drop-down menu, select “Basic Shapes”.
• In the list, just click on the rectangle (number 1 in the figure below).
• Further work with the figure occurs in exactly the same way as in later versions of Word - expand or narrow it, right-click, select “Add text” and insert the desired inscription.

There is another way which is to simply click on the rectangle on the bottom panel and continue working with it in the same way.

This option is indicated by number 2 in the figure below.

As you can see, all these methods are extremely simple and should not cause any particular difficulties. To find necessary points menu, you don’t need to spend a long time walking through Word tabs and looking for what you need.

But the result will be very impressive.

Method number 4. Caption Tool

Microsoft Word 2007, 2010, and 2013 have a Text Box tool. It is located in the "Insert" tab.

To make text in a frame using such a tool, you must perform the following steps:

• Open the “Insert” tab;
• Click on the “Inscription” button.
• Select one of the inscription styles.

As you can see, the very first style is a regular frame. Click on it, insert the text and click on an empty space on the page.

After this, the frame can be edited traditional way– resize, move, and so on.

As you can see, in this menu there are other options for inserting text - for example, there is a very impressive inscription in the form of a panel on the side. Word 2003 also has such a tool.

The whole process of using it looks like this:

• Click on the “Insert” menu;
• In it, select the “Inscription” item.

In any case, use this tool very convenient.

4 votes

Good day, dear readers of my blog. Photos in beautiful frames can be not only a spectacular gift that you wouldn’t be ashamed to send to friends for a holiday via the Internet, but also a stylish element of your website design. They can be used as part of the content or as an independent element. For example, placing it in the header, next to the logo.

Therefore, today I will tell you how to make a frame in Photoshop. All the methods that I will give in this article are quite simple, even a beginner can do it. If you are not too sure or don’t trust your own taste, then even in this case, I will tell you what to do. Well, shall we get started?

A way to quickly make a frame of one color

If you just follow the photo, you will end up with an oval frame.

If you simultaneously press Shift button on the keyboard, then round. By the way, this button can also turn a rectangle into a square.

You can click on the eye next to the layer's thumbnail to toggle the visibility of the fill on and off. It’s naturally easier to select from the background by turning off the top layer.

But further actions you will have to do this by turning on the top layer. And making it active. Watch the backlight.

When you're ready, press Del.

You can trim the edges.

Unusual frame edges

Now let's make a frame with unusual inner edges. First, create a new layer. You already know how to do this.

Now find Q on the keyboard and press to switch to quick mask mode.

Apply free transform using CTRL+T and reduce the size.

In the top menu we find “Filters” - “Distortion”. You can apply Wave, distortion, curvature, polar coordinates, spherization. I like the ripples.

We pull the slider to increase or decrease the effect, and then save.

That's not all yet. Click on Q.

We have highlighted the edges. By the way, use your imagination when working in Photoshop. This selection does not resemble the same as when working with circles, ellipses or themes. Think about how to use Photoshop's capabilities differently than the authors of such articles show you. Do not treat the acquired knowledge as a guide for action.

For now, these crawling ants won't help much. Choose Invert from the Selection menu to fill the area you want.

This is how it should work out for you. Be careful further work should occur on the top layer, not on the bottom.

You can apply a gradient.

Or one color.

Press CTRL+D to get rid of crawling ants.

Very nice frames for beginners

I already showed you the site photoshop-master. You may have noticed that there is a section with free and very beautiful frames. Even a beginner can use them. All of them are free.

Using them is quite simple if you look at these wonderful instructions.

Other free videos You can find lessons from the founders of Photoshop Master at this link: www.photoshop-master.ru/lessons .

However, if you want to reach greater heights, then you need not specific solution tasks. There are no professionals who can draw a frame from a gradient, but will go to Google to create a transparent one.

They delve into their own heads and knowledge of the tools helps them figure out how to achieve this themselves. If you are interested in this, I can recommend Zinaida Lukyanova’s course “Photoshop from scratch in video format” .

If you liked this article, subscribe to the newsletter, VKontakte group and get more useful information about making money on the Internet.

Good luck in your endeavors and see you again!