How to do a system rollback. How to create a restore point in Windows and perform a system rollback

All computer owners periodically encounter problems Windows operation after installing the wrong drivers or making changes to the operating system. Creating system restore points can solve this problem.

Dot Windows recovery 10 allows you to return the computer to the last stable state of the computer. When you create a restore point, Windows 10 saves a backup copy system files. Thus, instead of completely reinstalling Windows after installing some incorrect driver or catching a virus, you can simply roll back the system.

Restore points are created before installation Windows updates, and also automatically with the frequency that you set. The more free space on your hard drive you reserve for recovery points, the more recovery dates you will have to choose from.

The system allows you to manually create Windows 10 restore points. This may be required, for example, before installing programs that may somehow disrupt the system. If something goes wrong, the computer owner can always roll back the system to the date when everything worked properly.

Please note that restore points only contain backups systemic Windows files 10 that affect loading operating system. Personal folders and files are not included in backups. If you also want to backup personal files, then you need to do full image systems.

Windows 10 Recovery Settings

In order to look current settings recovery on your computer click right click mouse on the Start menu and go to Control Panel.

Go to the “System and Security” section.

Go to the “System” section.

Click on “System Protection” in the left column.

The window that opens shows the protection settings for your disks. The disabled state means that no recovery points are made for this drive, and the enabled state means that recovery points are made.

In my case, restore points are made only for drive C, on which the operating system is installed. In order to change the protection settings, select the drive you are interested in and click the “Configure” button.

At the top of the window you can enable or disable the creation of Windows 10 restore points, and at the bottom you can specify how much disk space you are ready to reserve for the storage of these backups. The larger the volume you specify, the more recovery points will be stored. As this volume fills, old restore points will be erased to make room for new ones. Usually, it is enough to store 2-3 system restore points.

To free up space on your hard drive, you can click the "Delete" button to delete all saved restore points.

Create a Windows 10 restore point manually

In order to create a Windows 10 restore point, on the previous “System Protection” tab, click the “Create” button.

A window will pop up in which you must somehow name the recovery point, in my case, for example, I called it “Restore point before installation unknown driver" In this case, the date and time of creation of the point will be added automatically. After that, click the “Create” button.

The process of creating a restore point will begin. It usually takes less than a minute. After completion, the “Restore point created successfully” window will appear (see picture above). Now you can install that incomprehensible driver that I was worried about and, in case of problems, roll back the system using a restore point.

Setting up automatic creation of recovery points

As already written above, Windows 10 automatically creates restore points before installing updates, and also gives you the opportunity to do this manually. But to be on the safe side, it makes sense to set up automatic creation restore points at a time period you specify, for example, every day.

Right-click on the Start menu and go to Control Panel.

In the "Control Panel" on the right top corner select “View” - “Small Icons” and click on the “Administration” section.

Open Task Scheduler.

Click one by one double click click on the items “Task Scheduler Library” - “Microsoft” - “Windows” - “System Restore”.

In the System Restore branch, an SR rule has already been created to create Windows 10 restore points. All we have to do is specify the interval at which this rule will be triggered. Double-click on the SR rule.

In the window that opens, go to the “Triggers” tab and click “Create”.

In the next window, you can set the period when Windows 10 restore points will be created. You can specify daily creation, weekly, monthly, when the computer starts or when it is turned off, and so on.

The period for creating points should be selected based on the reserved space on the hard drive for storing backup copies, since when this volume is filled, the newest recovery points will erase the oldest.

After you have selected the period for creating recovery points, click OK.

Restore Windows 10 to a restore point

Now that we have learned how to create restore points manually and automatically, we will tell you how to restore your system after a failure.

There are several ways to roll back the system using restore points - using Windows interface 10, using the command line, as well as using diagnostic tools.

System rollback via Windows interface

Most easy way, this is when you can start Windows 10. In this case, we do everything as at the beginning of the article. Right-click on the Start menu and go to Control Panel. Next, go to the “System and Security” - “System” - “System Protection” section. In the System Protection window, click the Restore button.

The Restore System Files and Settings Wizard will open. Click Next.

In the next window, check the “Show other restore points” checkbox. IN this list all are displayed possible points recovery. The left column shows the dates the restore points were created. The middle column provides a description to help us identify the point.

As you can see in the screenshot below, the restore point called “restore point before installation of the unknown driver”, which I created in the second chapter of this article, is listed as the last one created.

Finally, the right column indicates the type of recovery point creation (manual, system or installation), that is, under what circumstances the backup was created.

Also, you can click on the restore point of interest and click “Search for affected programs.” The window that opens will display a list of programs that will be affected by rolling back to this restore point.

When you have selected the restore point to which we want to roll back the system, click “Next”.

IN last window we must confirm the selected restore point. After clicking the “Finish” button, the system will begin the recovery process.

System rollback using diagnostic tools

If Windows 10 does not start and the desktop does not load, then the system can be rolled back using a special Windows environment 10 on system recovery. When you start your computer, instead of the desktop, you will see a warning that the Windows system did not load correctly. Click " Additional options recovery."

In the “Advanced Options” window, click on “System Restore”.

You will be taken to the already familiar window for selecting recovery points where you should select the last one stable condition system and click OK.

System rollback using the command line

If a worker Windows table 10 does not load, then you can roll back Windows 10 to last point recovery using the command line.

To do this, while on the computer, press F8 until a list of computer boot options appears. Select " Safe Mode with command line support."

In the opened command line write rstrui.exe, then press Enter.

As a result of this command, you will start the standard system restore wizard to a restore point in the graphical interface.

Video on creating a Windows 10 restore point

And finally, I suggest you watch a few videos on how to create a restore point and perform Windows rollback 10 to the latest stable version.

So, today we will talk to you about how to perform a system rollback in Windows 7. The point is that modern viruses and Trojans are capable of causing all sorts of malfunctions. Then the computer stops working normally. This is where the need to make “kickbacks” arises. Let's learn how this is done.

If there is no choice

But when is a system rollback necessary for Windows 7? Let's try to figure it out with you in this difficult matter.

To begin with, it is worth understanding that such “things” are not done just like that. You must have good reasons for any manipulations with your operating system. The first option when a user may need a system rollback for Windows 7 is a banal clutter that cannot be fixed normal methods. Moreover, this option It’s only suitable when the computer starts to slow down due to “junk”.

The second reason why you may need to roll back your Windows 7 system is constant crashes and factory resets.

Of course, we cannot ignore such a scenario as introducing a virus or Trojan onto your computer. Sometimes it is rollbacks that help to cope with problems. So, now let's see how to properly prepare and carry out the “operation”.

Preparation

Of course, after you notice that your computer has stopped “obeying” and is constantly slowing down, a completely logical conclusion comes to mind - do a rollback. After all, it returns the computer to the state it was in on the selected date. Very convenient. True, if you decide to perform such an action, then you should be well prepared. In Windows 7, a system rollback can be performed in several ways, which we will talk about today. But for now we are just getting ready.

You will need to save all your data that is important. Of course, personal information, as a rule, is not affected by rollbacks, but in the event of a “failure” during the process, you can “lose” Windows along with all the data. So, it's better to be safe. In addition, it is advisable to scan your computer for viruses. Some Trojans can interfere with the recovery process. So, if you are not afraid, then all that remains is to choose how to roll back the Windows 7 system, and then proceed to action. Let's see what's available for this.

System

Well, the first and most popular way- this is the restoration of the "OS" using built-in functions. This is very convenient to do in Windows 7. The system rollback will occur quite quickly, however, you will need to enable the function of setting “rollback points” in advance. It is enabled by default.

But how can you roll back the operating system once it has been logged in? To do this you will need a "recovery tool". It can be found in the Start menu. From there, go to "Standard" and then select "Service". Next, all you have to do is click on “recovery tool”. Now let's do a system rollback in Windows 7 together.

After you click on the button, a window will open in front of you that will warn you that the system will inevitably return to the state that you have “installed” now. Just agree with him and move on. Now you need to select a restore point. As a rule, they are done automatically. If there are none, then you are out of luck - if successful, all settings will drop to zero. Click next and wait for the process to finish. During this process, the system may reboot several times. Now you know how to perform a system rollback in Windows 7. But this is only the first option. It's worth talking about others.

Command line

Of course, you can’t escape anywhere without the so-called command line. It is she who will help us implement today’s idea. However, you will need to carry out the process correctly so as not to lose important data.

First of all, you will need to start the system in safe mode. Did you do it? Open Command Prompt (by pressing Win + R), then enter special combination. The command “rstrui.exe” is suitable for performing a system rollback in Windows 7. Now press "Enter". The already familiar “restorer” window will open in front of you. In it, select a rollback point and confirm your actions. Now all that remains is to wait for completion. In Windows 7, system rollback when booting into safe mode is another very popular method that is used system administrators. But there is another option for the development of events. It won't suit everyone. Let's get to know him.

Installation disk

So, the next way you can perform a system rollback in Windows 7 is using the installation disk. If you already have it, then great. No? Then it is better to use one of the already familiar options. After all, the whole problem is that the computer will refuse to work with a disk that is not identical to your OS.

In the case when the user uses a pirated version, especially one he installed himself, there should be no problems. In general, let's assume that we already have a disk. Now you need to set up your computer and get started.

Insert the disk into the drive and go into the BIOS. There you need to set the boot from the DVD-ROM first. Save and restart the computer. Wait until the Windows 7 installer starts to open. You will see the system rollback immediately.

Look at the lower left corner of the window - there will be “recovery” there. In the window that opens, select “System Restore”. Read the information about the irreversibility of the process and click "next". Now you should choose a rollback point. If the computer has been configured correctly, then you will already have at least 2-3 pieces. Have you chosen? Click "next".

In the window that opens, click “Done”. A warning from the series “did you think well?” will pop up. Yes, we had a good time thinking about it! So, feel free to click “yes” and watch how our system will be restored. After this, just click on the “reboot” button. That's all - you know how to rollback using all possible methods.

Doesn't always help

True, very often it turns out that in Windows 7, rolling back the system does not help. Moreover, it can start, and then “stall” in the middle or, even worse, at the very end. And no matter how hard you try, you can’t get the recovery tool to work. What then?

In this situation, the only threat is complete reinstallation"Windows". So, keep a close eye on your computer and make rollback points so that you are prepared in case you need to perform a restore. Good luck!

If you switched to the new Windows 10, but for some reason you didn’t like it, you can roll back to the previous operating system that was previously installed on your computer. You can also roll back Windows 10 to factory settings or to one of the restore points if the system produces an error that you cannot solve in any other way.

Conditions for system rollback

There are two ways to roll back the system - reinstall it or restore it:

the first method will require you license key, since the data that you previously had an activated system installed will be lost. When reinstalling, all information stored on the main disk partition will be lost;
The second method is suitable for you if 30 days have not passed since the transition to Windows 10, since during this period the Windows.old folder is saved, which stores all the data necessary to restore the previous installed operating system. After a month has passed from the date of transition to the new operating system, the folder is automatically deleted, and the license with previous system finally transferred to Windows. That is, if you had licensed Windows 7, and you spent 30 days on Windows 10, then the tenth version will become licensed, and to install Windows seventh you will need a new license key.

Rollback before 30 days have passed

Restore previous version installed system from the Windows.old folder in several ways. Try it first standard method and system recovery, but if they do not suit you, then use the second option - through a third-party program.

Standard method

Open PC settings. Open computer settings
Go to the "Update and Security" block.
Open the “Update and Security” section
Select the “Recovery” subsection. Go to the “Recovery” subsection
This subsection should contain the “Return to...” item. The version you can revert to is the same as the one you installed previously. Click on the “Start” button and follow the instructions that appear on the screen.
Click the “Start” button to start rolling back to the previous OS

Through recovery

While at the “Login” step, when you need to select account, hold down on the keyboard Shift key and select "Reboot".
Hold down the Shift key and go to reboot
The recovery menu will open, select “Diagnostics”. Go to the “Diagnostics” section
Go to selection additional parameters. Let's move on to additional parameters
Select the “Return to previous build” block.
Select the “Return to previous build” function
Select the suggested option - roll back to the previous one installed system.
Choosing where to roll back
Enter a password if you have one.
Enter the password
Read the warning and confirm the action.
Confirm the start of the rollback
Wait for the process to complete; it can last from ten minutes to several hours, depending on the performance of the computer and how many files need to be restored.
We wait until the previous version of the OS is installed

Using a third party program

This method is worth switching to if you have a Windows.old folder with files from the previous system, but the “Return to...” section is not displayed in the computer settings. This happens sometimes, so you can do next steps to use files from the folder:

The third party program is an image official application from Microsoft- Rollback Utility. Download this image, which weighs about 200 MB, from the official Microsoft website, and then write it to any free flash drive. This can be done using the built-in Windows functions 10: right-click on the image, select “Mount” and indicate on which media you want to burn the image.
Select “Mount” to begin the mounting process
Click Delete key to enter BIOS
Let's go to Boot menu
We put the medium first
Save your entries to BIOS changes and exit it, loading from the flash drive will begin automatically.
Save the settings and exit the BIOS
When the program loads from the flash drive, go to Automated Repair mode.
Select Automated Repair mode
Two systems will appear in the window: active and old. Select the one you want to roll back to and click on the button Roll Back. Instructions will appear on the screen, follow them.
Select the system to which the rollback will be performed

After 30 days have expired

If you no longer have the Windows.old folder, then rolling back without reinstalling the system is impossible. Create installation media from the version of Windows you want to roll back to by mounting the system image onto a flash drive. Boot from the created media and go through the installation process of the desired operating system.

Install the system by uninstalling the previous version

Please note that you will have to remove Windows 10 as you need to format the partition hard drive, on which the installation will be performed, which means that the license key will need to be entered again. If you want to save the files that you managed to acquire while using Windows 10, then copy them to third-party media, and after the installation is complete, transfer them back to your computer.

System Restore

System recovery is not a rollback to the previous operating system, but to the last restore point. Points can be created manually, but by default they are created automatically. They are needed so that if an unsolvable error occurs in the system, you can roll back all processes and computer settings to the moment when this error did not exist. To use the point, follow these steps:

Launch your computer's Control Panel. Opening the control panel
Go to the "Recovery" section. Find it using the search bar.
Go to the “Recovery” section
Run the recovery program.
Click the “Run System Restore” button
If you have several points, then you can select the one recommended by the system, or any other, by proceeding to manually selecting a point.
Select a recommended or other restore point
Wait while the system restores to automatic mode. Once the process is complete, you will receive a notification that the system has been restored successfully. Done, now all the settings and parameters of the computer correspond to the properties that it had at the time the restore point was created.
We go through the process of rolling back to a restore point

Video: Applying restore points

Via command line

If the computer does not boot into normal mode, then you can put it into safe mode with command line support, and then run the rstrui.exe command in the command line. Executing this command will start the recovery process, and all other actions will be the same as the normal recovery described above.

Run the command rstrui.exe to start the recovery

Return to original settings

If your computer settings have been changed in the worst side, then you have the opportunity to roll back all parameters to default values in a couple of steps:

Go to computer settings by holding down the Win+I keys on your keyboard, or through the search menu. Open the Settings application
Open the "Update and Security" section.
Select the “Update and Security” block
Open the “Recovery” subsection.
Go to the sub-item “Recovery”
Begin the process of returning your computer to its original state by clicking on the “Start” button.
Click on the “Start” button to begin resetting to default settings
You can choose one of two options: remove applications along with settings, but keep personal files, or delete everything that is on the computer, leaving completely clean Windows with empty hard drive.
Choosing how to reset settings
Having chosen the rollback method, confirm the actions by clicking the “Reset” button. The reset process is performed automatically, wait until it is completed without interrupting the procedure.
Click on the “Reset” button to start the process

Additional method

If the method described above gives you an error or does not allow you to reset the settings for some other reason, then you can use third party program from Microsoft to achieve the goal:

Reset when the system is frozen

If, due to changes in computer settings, the system no longer starts, and because of this there is no access to computer settings, then you can recover without logging into the system, but for this you will need a recovery disk or bootable USB flash drive:

Recovery using the program

If the system encounters an insurmountable error, then you can restore it to its original state using a bootable USB flash drive and the official application from Microsoft:

Download and run the application from the official Microsoft website designed for Windows installations 10 - Installation Media Creation Tool.
Download the Installation Media program Creation Tool
After launching the application, select the version of the system installed on your computer.
Selecting system image parameters
When selecting an action, check the option “Create installation flash drive” and go through the creation process to the end.
We indicate that we want to create an installation flash drive
Turn off the computer without removing the flash drive from the port, start the power-up process and as soon as the first signs of power-up appear on the screen, press the Delete button on the keyboard to go to BIOS settings. The key may differ, which one it will be in your case, depending on the motherboard model. But during system boot, lines will appear in which the key for launch BIOS.
Use the Delete key to go to the BIOS
While in the BIOS, go to the Boot section or “Download” in the Russian version.
Open the “Download” menu
Place the flash drive with the recorded image first in the boot queue. This must be done so that when the computer turns on, it starts loading not from the hard drive, but from your flash drive. If you have more new version BIOS is UEFI, then in the first place you need to put a flash drive whose name begins with UEFI: “Media name”.
Move the flash drive to the first place
Save the changes you made to the BIOS and exit. Loading from the flash drive will start automatically.
Exit the BIOS and save the changes made
When the first installation program window appears, do not start the process; instead, click on the Repair you computer button.
Select the "System Image Restore" option. Done, wait for the system to recover from the installation media you created.
Activate the “System Image Restore” function

What to do if these operations don't work

Rolling back to a previous operating system may not work if your Windows.old folder is damaged or lost. If the folder is unusable, then you have only one option - reinstall the system.

Restore may not work for the following reasons:

The restore point is damaged, use another, earlier point to successfully roll back the system;
if you are trying to recover via third-party media, make sure that you have installed correct version operating system, and also that it satisfies all the conditions: it has at least 4 GB of free space, formatted in FAT32 or NTFS format;
if one of the recovery methods suggested above does not work, then try recovering through bootable USB flash drive, return the computer to original state or reset settings to default values.

What can you do if Windows 10 freezes during a rollback?

If you are convinced that the system is frozen - the process does not move for more than twenty minutes, then you need to manually interrupt the process. Press the "Shutdown" button on the computer case for 5-10 seconds until it turns off. If this does not help, then unplug the device and wait until it turns off. Such actions can lead to an error, so resort to them only as a last resort.

After the computer turns off, start turning it on and enter the recovery menu. Usually, the F2 key is used for this, but on your model motherboard button may vary. Use the prompt that appears on the screen during startup to find the desired button. Once you enter the recovery menu, follow the reset and rollback instructions above.

If you were unable to enter the recovery menu, or the process started through this menu also froze, then create installation media and restore the computer using a system image; this method is described in the “Recovery using a program” section. If this does not help, then reinstall the system, while formatting the disk on which you currently have frozen Windows installed.

How to get back after a rollback

If you rolled back to Windows 7 or 8, and then decided to go back to the tenth version of the system, then use the same method as you used before when you switched from Windows 7 or 8 to Windows 10. Update through the update center or an installation flash drive, creating with her help official program from Microsoft - Installation Media Creation Tool. You can update to new Windows, and then roll back to old system, for example, using the Windows.old folder, and then update again to the tenth version of the system.

Updating to Windows 10

Transition between Windows versions can be done either by updating, moving from an old system to a new one, or by rolling back, moving from new system to the old one. To restore full operation of the system, it is not necessary to switch from one version to another; it is enough to reset the settings or restore parameters to default values using built-in functions or bootable media.

How to roll back the system Windows 7 if it began to notify about errors in its operation, slow down, refusing to function in established by the manufacturer mode, but still starts. It is possible to return the state of files to the restore point, in which critical OS registry information is stored. It is created automatically when certain tasks are performed that affect system data (for example, removing drivers).

The simplest, most convenient and effective way. Does not require special skills or knowledge. To carry it out, you need to perform the following steps on your computer or laptop:

Launch the OS and enter the Start button menu.
Entering search bar"Recovery" commands.

The system will open a window corresponding to the request in which you must select and activate the “System Restore” value. After the reboot, there will be a rollback to the point after which the action that started the incorrect operation equipment.

Carrying out the rollback procedure through the “Run” line

The method is considered quite effective and is kept in the arsenal for fixing Windows for many users. To begin the rollback, you need to turn on the device and open a window on the screen to perform the assigned tasks by pressing the “Ctrl + R” keys. Then enter “rstrui.exe” in the line, and then proceed to the recovery procedure:

After entering the task, the “System Restore” dialog box will open in which you need to study the information provided. It confirms that the proposed actions will not affect the safety of the user’s personal files.

After pressing the “Next” button, in the window that appears, select the available option for the date and time to which the rollback will be made, select system disk and start the execution procedure.

The OS will once again offer to confirm its intentions in the agreement to make the necessary changes. Checking "Yes" will trigger the automatic recovery to the specified point and restart the OS.

If the rollback procedure is successful, a window will appear with the relevant information, which you need to close and check the functionality of your device. If the problem has not been solved, try another method; repeating the same one several times in a row does not make sense.

Select and rollback to last known known configuration

At the core this method Windows 7 OS has the ability to automatically record registry information about the last time downloading its data. The method must be used if the computer refuses to boot and using the “System Restore” menu becomes impossible for the user. The procedure should be performed using the following algorithm:

Disconnect and restart the device.
Pressing the “F8” key and going to the advanced options menu to start the OS.
Using the cursor navigation buttons keyboard, set to “Last Known Good Configuration”.

After pressing “Enter”, the device should reboot, and Windows OS should roll back to the point and install again. The method does not always end successfully and, if there is no reaction to the actions taken, you need to try the next option.

Installation via "Safe Mode"

The procedure should be started after restarting the computer. If the OS is not installed, you need to wait BIOS boot and do the following:

Call up the required dialog box by pressing the “F8” key.

Use the arrow keys to select Safe Boot Mode and activate it.

After starting the OS, select the “System Restore” line.

Select the “Restore Point” option and activate the search by clicking the “Next” button.
After selecting the point you need by time and date, as well as selecting the disk, activate the rollback using the “Done” value.

After confirming your actions, you will roll back to the selected values. After rebooting the device, the OS should begin to function properly in normal mode.

Using the listed rollback options operating system to the selected control point, the user can always quickly and clearly debug its operation without resorting to help service department or computer technician. In some cases, if attempts did not lead to the desired result, which may mean incorrect functioning of the existing drivers, it would be a good idea to think about switching to a more “fresh” updated one. Windows version.

Launching every day personal computer, you inevitably bring something new to it. And it doesn’t matter whether you’re just surfing the Internet or installing new programs. After all, by visiting any web page, you may well catch a virus there or install it without knowing it. malware. Today we will talk about how to roll back Windows system XP back.

Forewarned is forearmed

A fairly well-known saying takes on a very clear and specific meaning in the context we are considering. Remember, there is only one way to restore your system, and it requires mandatory preliminary preparation. This tool is the But utility built into the OS, in order to use it to return the computer to previous state, you need to make sure in advance that such a point exists. Many users find that the system takes up a lot of hard drive space. This is partly true, but all discontent disappears at once when a situation arises in which restoration may soon be required. Therefore, before rolling back the Windows XP system, let's clarify how to create a restore point.

Starting position

As already mentioned, we will need to create a specific starting point to which we would like to return our computer if it breaks down or becomes infected with a virus. Of course, you can choose when to install the OS on your computer, but what's the point if it would be easier to reinstall the entire system?

So, to create a restore point, do the following. Go to the "Start" menu - "Programs" - "Accessories" - "Utilities". There, select the item In the interface that opens, select creation and wait until the computer completes the entire operation. Now you will have somewhere to return in case of problems with your computer.

If you are a user of a newer generation OS, such as Windows 7, then you should not care this item in the question of how to roll back the system. Windows XP, unlike Windows 7, does not create copies automatically and during installation does not include the automatic creation of such backup states.

Recovery

Finally, we got directly to the question of how to roll back Windows XP. To do this, you will need to repeat all the steps specified in the previous paragraph, with the exception that you will need to select the sub-item “Recover more than early state computer". In this case, you will be offered a list of all available states over the past time. How to roll back Windows XP? You need to choose the appropriate state. By default, in bold The most recent available position will be highlighted. Having selected the required item, click “Next” - “Finish”.

In fact, no one knows what guides a personal computer when restoring a system. He can delete installed programs, or maybe leave it. Your recent photos will disappear... Or they won't. Anyway, don't forget to back up your files. This, by the way, is another way to roll back the system. Windows XP Professional allows you to use third party utilities to save the system state.

Independent programs

There are many programs designed both for saving some of your computer files and for creating images hard drives generally. For example, "Acronis". By saving data with it, you can reinstall the entire system at any time, and then restore the contents of your hard drives.
Special Of course, with their help it is impossible to restore the system to its true value, but it is very possible to return some files. It is recommended to use File Rescue Pro.

System disk

If you have saved installation disk your operating system, you can perform a system restore using it. To do this, insert it into the drive and restart the computer from the disk. The operating system installer screen should appear in front of you. How to roll back the system? Windows XP itself suggests a solution. At the bottom of the screen we see the inscription “R - restore”. Click the corresponding button.

The computer will search for installed operating systems. After this, a menu will appear in which you must select the system to be restored. We indicate the OS we need to restore, enter its number and press Enter.

After that, enter the password, if necessary, and proceed to recovery. To do this, we need to enter the command to restore Fixmbr partitions. We confirm the action. Then we need to restore the boot area with the Fixboot command. After that, enter exit and reboot.

In conclusion, it is worth noting that if you are looking for instructions on how to roll back a Windows XP system via BIOS, then know that this is in no way possible. Any changes you could make using the BIOS will not directly affect the OS. The maximum that can be advised is to remove the coin cell battery from the motherboard. In this case, all BIOS settings will be reset, the computer password will be lost, and some recent changes will disappear.