How to run windows recovery tools. Windows System Restore

When working in Windows 7, serious errors may occur, after which the operating system simply stops starting in normal mode. However, this is not yet a reason to get out of a dusty corner boot disk Windows to reinstall it. Win 7 has a Recovery Environment in its arsenal - a powerful tool that will help restore the previous state of the operating system, avoiding the loss of data on your PC or laptop. In addition, other tools for resuscitating Win 7 are available to users.

Windows 7 system recovery methods

You can revive Win 7:

• using a restore point;
• using safe mode;
• through command line;
• through the Recovery Environment;
• using a disk with a Win 7 image;
• using the disk Win recovery.

Rollback to a restore point from Windows

If the OS boots normally, but you need to restore it to its previous state using a restore point, do the following:

Rolling back the operating system to a restore point will allow you to remove the software that caused problems with your PC, undo unwanted changes and return back to the state of the operating system when everything worked correctly and booted properly. And what is equally important: no data loss will occur, and all your recent documents will remain in their places. Some files may remain duplicated, slightly changing their name. You can delete unnecessary copies of these files yourself.

Note: This process is completely reversible. If necessary, you can cancel it and restore the Windows 7 system using another point.

Reverting the operating system in safe mode

This recovery method Windows systems 7 is almost identical to the previous one. It is used in situations where normally Win mode doesn't start:

Running Win 7 recovery from the command line

In some cases, when Win 7 does not start in any mode other than safe, the following method helps: restoring the Windows 7 system using the command line. You can do it like this:

Reverting the OS state through the Recovery Environment

Windows 7 Recovery Environment includes 5 tools offering PC user various ways troubleshooting problems related to the performance of a computer running Win 7. It is created in hidden section automatically. This happens when installing Win 7, be it “Maximum” or any other version.

To restore Windows 7 using this method, do the following:

Note: the first step is to start the OS with the last known good configuration.

The operating system automatically remembers the parameters of the last successful start of the PC in normal mode and applies them when you select this option. As a result, you can quickly regain access to the system without the slightest loss of data. If this method helps a PC user solve the problem, the question “How to roll back a Windows 7 system?” will immediately stop bothering you.

Restoring Win 7 using an image disk

This method of resuscitating Windows will allow the operating system to return to its lost functionality, even if it categorically refuses to start in safe mode. You will need bootable dvd with your installed Win version 7 . If there is no OS image on your PC, create one yourself. To do this, go to the control panel and select “Backup computer data”. Then select the option indicated in the screenshot below and follow the instructions.

Recovering Win 7 using a recovery disk

If, after pressing the F8 button, you do not find the line “Troubleshooting computer problems” in the list, restoring Windows 7 using a system repair disc will help. This happens if the user accidentally deletes the recovery environment partition, which is located in the Recovery directory of the system local disk. Do you think the only thing left to do is uninstall Win 7 and install it again? This is not necessary - the changes can be undone without having to reinstall the OS.

There are often cases when, after installing a program, driver, accidentally deleting a system file or virus attack The Windows 7 operating system begins to slow down or stops functioning altogether. If your computer doesn't have important information, then you can simply reinstall it. Otherwise, the system restore function will help you. This tool returns the OS with all data on the hard drive to a working state.

Windows 7 system recovery methods

Windows OS developers have provided a number of standard methods recovery, however, all of them do not provide a 100% guarantee. Therefore, be prepared that you may need to use several resuscitation methods in turn.

You can restore the functionality of Windows 7 using:

• applying the latest working configuration;
• safe mode;
• recovery points.

Using Last Known Good Configuration

This Windows resuscitation tool is the easiest to implement, so you should resort to it first. The sequence of work will be as follows:

After completing the above steps, automatic recovery data from the OS registry and working parameters of existing drivers. If this method fails to start the system, move on to the second method.

Safe Mode is an effective means of resuscitating Windows

Safe Mode is special option operation of operating systems, in which no automatic start installed programs, as usual loading Windows. In this case, only those drivers are activated, without which the operation of the OS is impossible.

This tool is launched in the same way as the last working configuration, that is, using the F8 key. When you log in using this method, the screen resolution will change to 800x600. This is normal, so no need to worry.

The following recovery order is presented below:

1. A boot disk with Windows 7 OS is inserted into DVD drive and starts. The system build you use must be the same as that on your computer. Therefore, if possible, take the same disk that you used when installing the operating system.
2. When a message about autorun pops up, click “Cancel”.
3. Open the “Run” command window, which is located in the “Start” menu.
   
4. Enter the health check command system files"sfc/scannow".
   
5. Some time after activation of the search process executable files all damaged or deleted system data will be copied from DVD disc and restored.
6. If you want to monitor the progress of the recovery, you need to enter the command line by entering the command “cmd” in the “Run” window. After this, “sfc /?” is written in the line. You must log in to the command prompt as an administrator, otherwise you will not receive the required information.
   
7. If the command line displays data in the form of hieroglyphs, then you will additionally need to enter the properties and select the required language there.
   

Using a restore point

Another effective remedy resuscitating the Windows system - applying restore points. The operating principle of this function is based on the fact that after a certain period of time the existing OS configuration is written to HDD. If any software problems occur, you can use the saved points and restore the computer's functionality.

Windows 7 is reliable and stable. But it is also subject to failures. There are many reasons for this (action computer virus, incorrect installation drivers or software, incorrect optimization, etc.). Complete reinstallation system will lead to the loss of personal data, all installed programs and drivers. Often, you can solve the problem and return your computer to working parameters using the built-in recovery tools provided in the arsenal of Windows 7. They are much more advanced than in more advanced earlier versions of this operating system.

How to restore Windows 7? There are several ways. Most of them are accessible and understandable to the average user and do not require special computer skills.

Setting up recovery tools

To avoid losing personal data, you first need to create a copy of the system. To do this you will need:

• call the main menu of the computer by clicking on the “Start” button;
• click on the line “All programs”;
• find the “Maintenance” section in the list;
• select the “Backup and Restore” component;
• When starting for the first time, set the mode to “Restore system parameters and previous versions files";
• save the changes by clicking on the “Apply” button;
• select a disk for storage backup copy(it must have at least 40 GB of free memory);
• click on the “Continue” button;
• upon completion of the archiving process, a copy of the system will be stored on the hard drive, which will be needed when solving the problem of how to restore Windows 7 to work.

Recovery disk and how to create it

A recovery disk will help restore the operating system to functionality. To create it you will need:

Take a blank DVD or CD;
. in the “Maintenance” section, click on “Create a system repair disk”;
. insert the disc into the drive;
. click on the “Create disk” button;
. wait until the backup process is completed.

Restoring system performance using a recovery disc

How to restore Windows 7 if it is missing installation disk? A recovery disk will come to the rescue. In order to use it, you must:

Insert the disc into the drive;
. to restart a computer;
. go into the BIOS and change the boot settings, setting priority to CD/DVD;
. when a message appears on the screen about the possibility of booting from disk, press the “Enter” key;
. specify language;
. in the next window, select the saved copy of the OS;
. click on the line “System Restore”;

Using the System Software

The OS has a built-in component that allows you to restore Windows 7 without a disk. It's easy to work with. To run it you will need:

Open the main menu of the computer using the “Start” button;
. in the search bar located at the very bottom, enter the name system utility"System Restore";
. run the component.

Rollback Windows 7 using system program consists of several stages:

After launch, the System Restore Wizard window will open;
. continue working with it by clicking on the “Next” button;
. the window that opens will display the latest restore point;
. select it with the mouse and click on the “Next” button;
. if there is a need to roll back to an earlier point, you should check the box “Show other restore points” in the same window;
. to view the changes that will occur after the rollback, highlight desired point and click on the line “Search for affected programs”;
. confirm the selection of the restore point by clicking on the “Finish” button;
. the system will issue a warning that it is impossible to stop the recovery process;
. To continue, click on the “Yes” button;
. wait a while while the system is configured;
. to restart a computer.

In this simple way you can restore Windows 7 on a laptop or computer and return it to them working condition.

How to restore your system in safe mode

Sometimes situations arise when the system refuses to boot in normal mode. In this case, a rollback can be performed through safe mode. To do this you need:

Turn on the computer;
. Before the system starts loading, press the “F8” key until it opens function menu;
. select the line “Safe Mode”;
. launch it by pressing the “Enter” key;
. restore Windows 7 using a system component.

You can do it another way:

After entering the special menu, use the “F8” key to find the “Safe Mode with Command Line Support” item;
. use the command “rstrui.exe”;
. The System Restore Wizard will start;
. perform a rollback following the wizard's prompts.

Now you know how to restore a Windows 7 system if it cannot be booted normally.

BIOS setup

Before you begin restoring the OS from the installation disk (provided you have one), you need to perform the appropriate BIOS settings, namely change the boot priority:

Insert the boot disk into the drive;
. enter the BIOS using the “Del” or “F2” key;
. find the section " Advanced BIOS Features";
. go to the “Boot Sequence” subsection;
. set the parameter “First Boot Device» value “CD/DVD”;
. go to the main thing BIOS menu"Esc" key;
. save changes using the “F10” key.

On some computers, the algorithm for making changes looks like this:

Go to the “Boot” section;
. open the “Boot Device Priority” subsection;
. for the “1 st Boot Device” parameter set the value to “CD/DVD”;
. press “Esc” to return to the main menu and “F10” to save changes.

Change BIOS settings helps in solving the problem of how to restore Windows 7 from the installation disk. Below we will tell you what you will need for this.

Using a boot disk

If it is not possible to launch a special menu using the “F8” key, you will need a boot disk to roll back the system.

After starting the disc, a window will appear on the computer screen Windows installations;
. select language;
. continue loading from the disk by clicking on the “Next” button;
. click on the line “System Restore”;
. select a recovery option by clicking on the desired option;
. follow the recovery wizard's prompts.

Windows 7 password recovery

If you have forgotten your password and cannot boot the system, you will need to reset it. How to recover Windows 7 password? This can be done in several steps, provided you have a boot disk:

Insert the installation disk into the drive;
. boot from it, having previously changed in BIOS priority downloads;
. At the bottom, find the line “System Restore” and click on it;
. in the next window, select the desired OS from the list of systems available on the computer;
. click the “Next” button;
. Among the system recovery options, find the “Command Prompt” item and select it;
. run Windows registry command "regedit";
. find and select the registry key “HKEY_Local_Machine”;
. open the “File” menu (located at the top);
. select the “Load hive” function;
. in the window, find the “System” file using the path “C:/Windows/system32/config”;
. indicate the section name, for example “222”;
. open the registry key “HKEY_Local_Machine”;
. find section “222”, and in it the subsection “Setup”;
. change the “SetupType” parameter by double-clicking on it;
. in the window that opens, set the value to “2”;
. close the window by clicking the “Ok” button;
. change another parameter “CmdLine”, setting the value “cmd.exe”;
. Using Explorer, select the “222” section again;
. in the “File” section, use the “Unload Hive” option;
. close the registry editor;
. remove the installation disk from the drive;
. to restart a computer.

Access recovery

The corresponding, or rather, changing the registry branch allows you to remove the old one and install New Password and create another user. Algorithm:

After reboot, instead of the usual window Windows greetings The command line will appear;
. use the “net user” command to display all accounts on the computer;
. change the password for the selected account “net user username new password”;
. create new entry user "net user username password/add";
. add created account to the administrators group “net localgroup Administrators username /add”;
. remove the created account from the group ordinary users"net localgroup Users name user/delete";
. close command line;
. the usual one will do Windows boot;
. To log in, use the credentials of the newly created administrator.

Like "Windows 7", namely forgotten password, if you are dealing with a localized Russian version? You must use the same commands, only changing the value of "Administrators" and "Users" to "Administrators" and "Users".

There are many ways to restore the OS. But no matter how reliable they are, it is advisable to prevent system failure. And then the question of how to restore Windows 7 will disappear by itself.

Often computer users Windows control 7 encounter problems with the operating system. Problems with your computer usually appear when it slows down a lot and programs won’t open. Also, the computer may not start at all or may do so every once in a while.

The reasons that cause problems in the performance of the operating system can be very different. For example, if a computer gets hit virus, it can damage system files. Also, difficulties with the PC may appear during installation low-quality software, which can damage the structure of system files. To solve a problem with the performance of a computer on Windows 7, you need to roll back to the previous one. recovery point.

To protect the OS, Windows 7 uses restore points that the system periodically creates. Essentially, restore points are previous system state Windows files 7 . To help Windows 7 PC users, we have prepared material that will describe detailed process restoring the system in various ways.

Restoring performance in a busy seven

If your computer running Windows 7 boots, but the system behaves unstable, then it's time to roll back to previous point recovery. First of all, we need to get to the window where we can call up the system recovery options. To do this, open the program “” by pressing combinations Win keys+ R , through which we enter the following command: systempropertiesprotection

A window should open in front of us “ Properties of the system" on the " tab System protection" You can also get to this window in the standard way through the menu “ Start". Further action there will be a button press Recovery….

After clicking, the System Restore window will open. It will ask you to restore the system using a recommended access point or select another one. We'll stop at recommended restore point.

This window requires confirmation for the selected recovery. To confirm, click the Finish button.

This button will bring up a message warning that after the recovery procedure it will be impossible to return to the previous parameters of the seven. By clicking Yes in the message, we will begin restoring the Windows 7 system.

If the process of returning to previous state occurred without errors, a corresponding message will be displayed.

If you are unable to roll back to previous settings using the recommended point, you should select the point that was created later than the selected restore point Windows 7 systems. I would also like to note that to perform this operation you will need special privileges. That is, when you log in, you must select an account admin and enter a password for it.

Restoring the computer's functionality when the OS starts

If your PC is running seven at all is not downloading, then you can start the operating system in safe mode. After the BIOS start window appears, press F8 on the keyboard (for laptops there may be another key, for example, Del or one of function keys). This action will cause menu alternative options loading seven.

In this menu, select the item “ Safe mode" and continue by pressing Enter, after which the system will start in safe mode.

If the system successfully started in safe mode, then start restoring the seven, as shown in the previous example. In this mode to ensure maximum security many functions disabled OS, including GUI Windows Aero. This is what it will look like running program"" with the command " systempropertiesprotection"on a system running in safe mode.

We return the computer to functionality using an installation disk or bootable USB flash drive

If the previous two examples do not help you, then you will need to restore seven installation disk or flash drive. For computers that do not have optical drive, you need to use a bootable USB flash drive with the OS. Bootable USB flash drive can be created using special utilities. The most popular utilities for this purpose are Windows USB/DVD, Download Tool And Rufus.

Boot from the installation disk or via a USB flash drive. In the installer start window, click Next and proceed to the next window.

After searching, select the OS you want to restore and click Next.

In the window that appears, select the same item “ System Restore».

This action will launch the Seven recovery utility. In the utility, click Next. This action will take you to list of recovery points. Let's choose a suitable point and continue.

A window will appear in front of you, as in the first example. Therefore, we click the Finish button and respond to the message, after which we will start the recovery.

After a successful rollback to the previous state, you will receive a message like this.

Emergency recovery of Windows 7 using antivirus

If your PC is infected viruses, interfering proper operation computer and the first three examples considered do not help you, then in a good way recovery in this case will be an anti-virus life disk from Dr.Web. With this disc you can clean the system of all types of dangerous software. In addition to cleaning, Dr.Web LiveDisk will be able to cure infected objects, which are necessary to restore Windows 7.

The Dr.Web LiveDisk image can be used to record to optical disk, and to a flash drive. To use Dr.Web LiveDisk on USB drive, you will need special program. You can download the program for recording onto a flash drive and the image itself on the official website by going to www.freedrweb.ru/livedisk.

Let's run the recorded image on disk, setting it to boot first in the BIOS.

In the bootloader start window, select first item Dr.Web LiveDisk and press Enter. These actions will start loading Dr.Web LiveDisk.

After downloading Dr.Web LiveDisk, we will get a full-fledged Linux-based operating system. As written earlier, the main purpose of Dr.Web LiveDisk is to clean and treat virus software. Therefore, this OS has a built-in antivirus Dr.Web CureIt!. This antivirus runs with the OS.

Click on Dr.Web CureIt! button Start scan, which will start scanning, cleaning the system and disinfecting viruses.

After verification, Dr.Web CureIt! will remove or cure infected objects.

Since there will no longer be in the system malicious code, you can safely restore the system in the three ways described above.

If, after checking the system files, you are unable to restore your Windows 7 system, then the only reasonable solution would be to make a complete backup of the information and reinstall the system again.

How to make a system image in seven

Another recovery feature in Windows 7 is creating a system image. In this image, you can save all the information on your hard drive, including the operating system. After restoring using this method, you will receive an OS with the same parameters as on the day the image was created.

Run " Control Panel" and go to the tabs " system and safety», «»

In the window that opens to create an image, indicate the location to save it and click Next.

In the window that appears, all that remains is to click the Archive button, which will start the image creation process.

Restore the created image with Windows 7 and all information on local disks using the installation disc. The recovery principle is shown in the second example, only when choosing a recovery method you need to select " Restoring a system image" and indicate its location on the saved drive.

Alternative methods to restore the Windows 7 operating system

Except standard methods recovery there is alternative software that does the same function. The most interesting solution that allows you to perform system recovery is the program Acronis True Image 2016. This is branded software package Acronis company.

First of all, download and launch Acronis True Image 2016 from a shortcut on the Desktop. When launched, the program will ask for a name and password.

Now let's set it up Acronis True Image 2016 so that he can do backup of the entire disk with Windows 7 OS. This setup should be done immediately after installing the OS, so that during the process using Windows you were able to restore functionality from several backup copies of the system created in certain period time. So, let's start setting up. To do this, select the storage type by clicking on the “” link.

In the window that opens, select the storage “ Acronis Cloud».

Now let's create a schedule for our backups. To do this, press the button “ Options" and let's move on to the storage settings settings. On the first tab, select the schedule you like for creating backups of our system.

As you can see, the entire computer is selected as the backup source. Therefore, in the schedule we set, a backup copy of the system will be created in cloud storage " Acronis Cloud».

For an example of recovery, let's take archival copy not from cloud storage"Acronis Cloud", and with hard drive. If you have created a backup copy on your computer, then Acronis True Image 2016 will find her himself.

So we press the button Restore your computer, after which the program will completely restore the system to the state it was in when the backup was created. Also, if you are unable to carry out Windows start 7 on the computer, at Acronis True Image 2016 there is for this boot image, which can be written to disk.

You can download this image from your account page. You can obtain a password and login on the official website www.acronis.com. The principle of operation of the bootloader is the same as with the desktop version. Load disc from Acronis True Image 2016 on your computer you can by setting it in the BIOS first when booting.

From the example it turns out that the utility allows Full control over the creation of PC recovery copies and back up your entire system to the cloud.

An example of launching an Acronis True Image 2016 boot disk

To launch the disk Acronis True Image 2016 When starting the system, you must set the boot mode from the optical drive first in the BIOS. For example, for motherboard MSI A58M-E33 these parameters in BIOS mode look like this.

Another boot method is to use hotkeys to call up the drive boot menu in the BIOS. For example, for maternal MSI boards A58M-E33 hotkey is the F11 button. By clicking this button we will launch special mode, in which, when the system starts, it will open drive boot menu in BIOS.

Booting from Acronis disk True Image 2016, we will be taken to such a menu.

In this menu you need to select Acronis True Image 2016, after selection the program will start.

The example shows that launching a boot disk Acronis True Image 2016 by using desired mode The BIOS is not complicated at all.

Let's sum it up

In this article we have discussed almost all the methods and parameters system recovery. We also looked at ways to restore the seven to alternative software and using an antivirus. Which method to choose to restore Windows 7 depending on the situation is up to you.

To summarize, I would like to note that they mainly disrupt the operation of the OS viruses and experiments with different illegal software. Therefore, so that you do not have to constantly restore the system, use only proven and licensed software, and also use reliable comprehensive anti-virus protection.

I would also like to note that the examples discussed in the material will work not only on Windows 7, but also on more modern ones operating systems, such as Windows 8 And 10 . And we, in turn, hope that our material will allow you to properly restore Windows performance 7 and you can confidently say that I can do a system restore.

Video on the topic

And I already wrote how to create a restore point. Now is the time to write, how to do a system restore in Windows 7, and to put it more simply, now I will write about that how to do a system rollback.

If you have some kind of problem with your computer, for example, it has become very glitchy, or even worse, it won’t start at all, then the first thing you need to do is to try a system rollback, thereby we will return the settings and system files from the backup that was created for example two days ago, when the computer was still working normally.

This good opportunity quickly repair your computer and return it to normal working condition. I will write three ways in which you can rollback in Windows 7.

• The first method: how to rollback from Windows.
• Second method: how to restore the system from safe mode.
• Third method: recovery using a boot disk with Windows 7.

When restoring the system, your personal files will not be affected.

System rollback from Windows 7

This method is useful when the computer turns on and works, it doesn’t matter how it works, the main thing is that it works :). For example, after installing some program or driver, problems appeared with the computer. You uninstalled the program, but the problems remained. In this case, a system rollback should help.

We do this: click “Start” and start writing in the search bar "recovery". Find and run the program in the search results "System Restore".

A window will open in which we click “Next”.

Now you need to select the restore point to which you want to rollback and click “Next”.

Confirming the restore point. Click “Finish”.

One more warning, click “Yes”.

A window will appear asking you to prepare for recovery. Then the computer will reboot and a message will appear stating that .

If this does not solve your problem, then try rolling back to another point. This is where we can finish with the first method.

Restoring the system from safe mode

You can roll back settings and system files from safe mode, when, for example, Windows does not boot in normal mode. There were cases when this method helped me out a lot.

First, we need to go into safe mode, as I wrote about how to do this in the article. Well, if you missed the link, then I’ll write in a nutshell how to enter the secure Windows mode 7.

Restart your computer and as soon as it starts to turn on, press F8. A black window will appear with additional options downloads. Choose "Safe mode" and press “Enter”.

We wait until the computer boots into safe mode. Next, all the steps are almost the same as restoring from Windows, but I’ll write it again, just in case :).

Click start and enter “recovered...”, launch the utility "System Restore".

Since I just did a system rollback, I now have an option to cancel the restore. Choose “Select a different restore point” and click “Next” (you will probably just need to click next).

Select a point for rollback and click “Next”.

Click on the “Finish” button.

We answer “Yes” to another warning.

The computer will restart and turn on in normal mode. Of course, if the rollback to previous settings helped solve your system boot problem.

Rollback to previous settings using a boot disk

I left this method for dessert, because here you will need a boot disk with Windows 7. But this method also has its advantages. For example, you can rollback when even safe mode does not work, in short, in the most severe cases :).

As I already wrote, you need a boot disk with Windows 7, the article describes how to create it. Next you need to go into the BIOS and boot from the installation disk.

The search will begin installed systems. If you have more than one, then select the one you need and click “Next”.

Then select "System Restore". Then the whole process is no different from the first two methods.

Click “Next”.
Select a point for rollback and click “Next” System Restore in Windows 7. How to perform a system rollback? updated: January 15, 2013 by: admin