Burn an image to an ultraiso flash drive: making the complex simple. How to burn an ISO image file to a USB flash drive
This installation method is suitable if you own a netbook or your CD/DVD drive has failed and you need to install Windows 7. This method is also good because the process of installing Windows 7 from a flash card is several times faster than from a CD or DVD disk.
Before you start recording Windows 7 onto a flash drive, copy all important data from the flash drive to other storage media (a hard drive where Windows will not be installed, another flash card, disk, etc.), as during the formatting and recording process Windows 7 image onto a USB flash drive, all the data on it will be destroyed.
First way
If you are creating a bootable USB flash drive while in the Windows 7 operating system, then you will need a program Windows 7 USB/DVD Download Tool, which can be downloaded from Of. Microsoft website following the link.
If you are creating a bootable USB flash drive under the Windows XP operating system, you will need to install Microsoft.NET Framework 2.0 And Microsoft Image Mastering API 2.0. Of course, if you already have them installed (usually the first program), then you do not need to install them again.
1) Insert the USB flash drive into the laptop.
2) Launch the program. Click the button Browse.
3) Select the Windows 7 ISO image and click the button Open.
4) After you have specified the Windows 7 ISO image, click the button Next.
5) Click the button USB device.
6) Your flash drive should appear in this window. Click the button Begin copying
7) Click on the button Erase USB Device
8) Click Yes.
9) The process of writing the Windows 7 image to the USB flash drive will begin
10) When recording is complete, the status will change to Backup completed. Close the program
Second way
For the second method you will need a program Ultra ISO.
1) Insert the USB flash drive into the laptop.
2) Launch the program. In Windows 7 and Windows Vista, it is recommended to run the program as an administrator.
The UltraISO program is paid, but you can use a trial period, we will consider this option. Click the "Trial period..." button
3) Select a menu item File ->Open...
4) Select the Windows 7 ISO image and click the button Open.
6) In the field Recording method: select USB-HDD. Click the button Format.
7) The formatting utility will launch. Click the button Begin.
8) Click OK.
9) After formatting, a success window will appear. Click OK.
10) Close the program.
11) Press the button Write down.
12) Click Yes.
13) The process of writing the Windows 7 image to the USB flash drive will begin.
14) Upon completion of recording in the column Event The message “Recording complete!” will appear. Close the program.
Third way
For the third method, we need the WinSetupFromUSB 1.0 Beta 7 - program.
Note: the link has a newer version, but the principle remains the same.
1) Insert the USB flash drive into the laptop.
2) Launch the program. In Windows 7 and Windows Vista, the program must be run as an administrator.
In field USB disk selection and format your flash drive should be listed.
Note: If the flash drive is not detected, then format it using the PeToUSB or HPUSBFW utility.
Also, the flash drive may not be detected if it is inserted into the laptop after the Winsetupfromusb 1.0 Beta7 program has been launched and for it to be detected, just press the button Refresh.
3) Click the button RMPrepUSB.
4) Mark the following lines: WinPEv2/WinPEv3/Vista/Win7 bootable (CC4), NTFS. Place a check mark next to it Boot as HDD (C: 2PTNS). Click the button 6 Prepare Drive.
5) Click the button OK.
6) Click the button OK.
7) After this, something like this will appear Dos window.
Warning: Do not close this window. It should close automatically.
8) After Dos the window will close click the button Exit.
9) Check the box next to it Vista/7/Server 2008 - Setup/PE/RecoveryISO. Click on the square on the right.
10) A window will appear Browse folders in which you need to select the virtual drive in which the Windows 7 ISO image is mounted.
After you have done this, press the button OK.
11) Press the button GO. The process of writing Windows 7 to the USB flash drive will begin.
12) At the end of recording, a small window will appear. Click OK.
13) Close the program.
Fourth method
The installation method is quite simple, so anyone can do it! For this we need:
1) Windows 7 image
2) Flash drive with a capacity of at least 4GB
3) A program for creating and editing ISO images, ultraISO from the above method or free MagicDisk
You can take any media from a regular flash drive to an SD card, but not less than 4GB!
4) Launch the command line (in Windows XP this is standard->command line. In Windows Vista/Windows 7, open start, at the very bottom there is a search, enter cmd and open with administrator rights).
5) Next on the command line enter diskpart, the disk management utility will open.
6) Next, in the diskpart utility itself, enter: list disk, this will display all the physical disks of the PC, namely disks and not partitions.
Among them we are looking for our flash drive.
7) Then we execute the command select disk #, Where # This is the number of our flash drive.
In this case, the flash drive on the screen is number 1, therefore s elect disk 1. All further manipulations will be carried out only with this disk.
8) Execute the command clean, clean the drive, then the command create partition primary- create a new partition on the disk.
9) After creating a new section, write select partition 1, select this section for manipulation, enter active, thereby making the section active.
10) Now for the flash drive to be visible in bios, you need to format it in NTFS format, which we do with the command format fs=NTFS.
11) Next, you need to activate the process of connecting the device and assigning letters to it, we do this with the command assign.
That's it, the preparation process is complete.
Installing Windows 7
You can record the distribution using any file manager or a free one.
In this case, you need to somehow open the image of the installation disk with the OS, this can be done with any disk emulator, Alcohol or MagicDisk, create an image and copy everything from it with a file manager to our prepared flash drive.
That's it, the process of creating the installation flash drive is completed, now we try to install the OS by first setting it in bios.
Well, that’s all, which of the four methods of creating a bootable flash drive to use is up to you.
Enabling booting from a flash drive in the BIOS
Before you start installing Windows 7 from a flash drive, you need to go into the BIOS and enable booting from the flash drive.
To enter the BIOS you need to press a certain key when the computer boots. On desktop computers, this is the Del key. On laptops, the F2 key is most often used.
Usually, when you turn on the laptop, a screen appears on which at the very bottom there is a line that says which key you need to press in order to enter the BIOS.
If you do not have such a line, then you need to look at the information on how to enter the BIOS User Manual walking with a laptop.
1) Insert the flash drive into the laptop if it is not inserted.
2) Turn on the laptop, if it is on, then reboot.
3) Go to BIOS.
Using an example, the whole process will look as shown below; if your BIOS is different, then the principle will remain the same. If you have questions, write in the comments.
4) Go to the tab Boot. In it, in boot order, you need to put our flash drive in first place, using the arrow keys and keys F5 And F6. That is, we use the arrow keys to select our flash drive, and use the key F6 we take her to the very top.
To find out which keys you need to use to set the boot order, see the tips on the right.
The name of the flash drive should appear in the line USB HDD.
Also, the flash drive may appear in the line USB KEY.
To save changes and exit the BIOS, press the key F10. (Depending on the BIOS manufacturer, the key may be different. See tips on the right or below).
5) A window will appear asking in English whether to Save changes and Exit? You are taking Yes.
6) After this, a reboot will occur and the Windows 7 installation process will begin.
Installing Windows 7 from a USB flash drive
If a bootable USB flash drive with Windows 7 was created using the WinSetupFromUSB 1.0 Beta 7 program, a green screen will first appear. Select Start Vista/Win7/Server 2008 Setup or PE/Recovery ISO from partition 0.
Next, the Windows 7 setup program will launch.
Write in the comments what is not clear and what questions you have.
If you want to create a bootable USB flash drive or burn a distribution kit of some utility/program onto it, you need the appropriate software. This article will present several of the most convenient and easy-to-use programs and utilities. All that remains is to choose the most suitable one for yourself.
The first solution is the official program from Microsoft, called Media Creation Tool. Its functionality is small, and all it can do is update the current version of Windows to the latest 10 and/or write its image to a flash drive.
The advantage is that it will save you from searching for a clean and working image, thanks to the fact that it will record the official distribution kit on a USB drive.
Rufus
This is a more serious program that has all the necessary functions to create a full-fledged bootable USB drive. Firstly, Rufus suggests formatting before burning the distribution. Secondly, it carefully scans the flash drive for damaged sectors so that you can replace the media if necessary. Thirdly, it offers two types of formatting: quick and full. Of course, the second will delete information more efficiently.
Rufus supports all types of file systems and is portable. By the way, thanks to the Windows To Go feature, you can burn Windows 8, 8.1, 10 to a flash drive and run this system on any PC.
WinSetupFromUSB
The next solution is Win Setup From USB. Unlike the previous program, this utility is capable of recording several images at once, creating multiboot media.
Before you start using it, it suggests making a backup copy of all information on the media, as well as setting up the boot menu. However, the utility is not Russified, and the menu through which control takes place is quite complex.
SARDU
This program will save you from having to search for the necessary distributions on the Internet, since you can select the ones you need directly in its interface. She will download everything she needs from official websites and record it on the required media. The created image can be easily tested for functionality through the built-in QEMU emulator, which was also not the case in previous software solutions.
There were some downsides too. The fact is that most images can be downloaded via the SARDU interface for subsequent recording on media only after purchasing the PRO version, otherwise the choice is limited.
XBoot
This program is easy to use. All that is required to get started is using the mouse to drag the required distribution kits into the main program window. There you can distribute them into categories and create a description for convenience. In the main window you can see the total size of all distributions loaded into the program in order to select the media of the required size.
As in the previous solution, you can download some images from the Internet directly through the XBut interface. The choice, of course, is small, but everything is free, unlike SARDU. The only negative of the program is the lack of Russian language.
Butler
This is a utility created by a Russian developer, which is not very different from previous solutions. With it, you can record multiple images and create unique names for them so as not to get confused.
The only thing that distinguishes it from other similar programs is the ability to choose the design of the menu of your future bootable media, but you can also select a regular text mode. One bad thing is that Butler does not provide the ability to format a flash drive before recording.
UltraISO is a multifunctional program for burning images not only to a flash drive, but also to CDs. Unlike some previous programs and utilities, this one can create an image from an existing disk with a Windows distribution for subsequent recording on another medium.
Another good feature is creating an image from an operating system already installed on the hard drive. If you need to run a distribution, but don't have time to burn it, there is a mount function that allows you to do this. In addition to all this, you can compress and convert images to other formats. The program has only one drawback: it is paid, but there is a trial version for testing.
UNetBootin
This is a simple and portable utility for burning images to a flash drive. As in some previous programs and utilities, the functionality of YunetButin is limited to recording an existing image on media and the ability to download what you need from the Internet through its interface.
The main disadvantage of this solution is the inability to simultaneously record several images on one drive.
PeToUSB
Another free, portable utility for creating bootable media. Among its capabilities, it is worth noting the formatting of a USB drive before recording, which is clearly lacking in the same UNetBooting. However, the manufacturer has long stopped supporting its brainchild.
It supports writing OS images to a flash drive with a capacity of no more than 4 GB, which will not be enough for all versions. In addition, the utility is not yet Russified.
WinToFlash
The selection is completed by a functional program for recording images – WinToFlash. Using it, you can burn several distributions at once and create multi-boot media, unlike Rufus. As with UltraISO, through this program you can create and burn an image of an existing disk with a Windows distribution. It is also worth noting the function of preparing the media for recording - formatting and checking for bad sectors.
Among the features there is also the function of creating a bootable USB flash drive with MS-DOS. VinTuFlash provides a separate item that allows you to create a LiveCD, which may be necessary, for example, to restore Windows. There are also paid versions of this program, but the functionality of the free version is quite enough to easily create a bootable flash drive or disk. In fact, WinToFlash combines all the useful features of the previous software solutions we discussed above.
All the programs and utilities listed in this article allow you to create a bootable USB flash drive, and some even a CD. Some of them are modest in terms of functionality, while others offer a range of features. You just need to choose the most suitable solution and download it.
It should be said right away that there are many ways to carry out this operation. The choice depends on the purpose and In this case, we will create a bootable flash drive with the Windows operating system. Next you will find out using the “WinSetupFromUSB” program.
Preparation
Since we will be recording Windows, we will therefore need its image. Where you download it from does not matter. The most important thing is that you use a fully working operating system that has already been tested on other devices. You can burn not only an ISO image, but also an already unpacked version of it. It is recommended to use a flash drive with a capacity of at least 2 GB. Burning an ISO image to a flash drive will take you about 30 minutes (it all depends on the parameters of your computer). The “WinSetupFromUSB” program can be downloaded from the World Wide Web for free.
Conclusion
The question of how to burn an ISO image to a flash drive is often asked on various forums and portals. Everyone offers their own tools, programs and, accordingly, instructions. I have offered you my own method that will help you make your own bootable flash drive. I hope you understand how to burn an ISO image to a flash drive.
Hello, friends! Today we’ll talk again about creating a bootable USB flash drive.
How to create a bootable USB device? For what purpose should I use it and what program should I use to record it?
A brief overview of the five most popular and free programs for creating a bootable USB flash drive.
Modern developments do not stand still, and yesterday's technologies are slowly but surely losing their relevance. So the once popular CDs and DVDs no longer seem like such a clear solution for storing, transferring and working with information. High data reading speed, versatility and reusability are just a small part of all the advantages of a flash drive as a bootable medium over disks. Already today, almost all personal computers and laptops, if they are no more than ten years old, support the ability to boot from USB devices. And in some cases (for example, a netbook), a flash drive may be the only boot device from an external drive.
By the way, the new Windows 10 operating system will be the first axis, the distribution of which will be officially distributed on a USB drive. And if you suddenly need to recover files from a flash drive, read about it. I also recommend paying attention to, which will help you take your mind off everyday work and lift your spirits.
With the help of additional software, a flash drive can be used not only as a boot device for installing, reinstalling and restoring the operating system, but also to create an emergency device (Multiboot). This is a kind of resuscitator, a tool from which you can boot at any time and cure your computer of viruses, restore system files or save important data. I described how to create such a flash drive resuscitator in the article “Creating a bootable Live CD/DVD/USB device and its use.” You can read this article.
Despite all the obvious advantages and the growing popularity of a flash drive as a bootable device, there are not so many programs for creating it. Nevertheless, they exist, and today I will introduce you to them in more detail, but first a few words about the preparatory stage.
Preparing a flash drive
We will need the flash drive itself, plus knowledge of some important aspects. First, you need to make sure that your computer supports booting from USB devices. There is a misconception that if in the bios (boot section) there is no option to select boot from usb (there are only floppi, hdd and dvd-rom options), then boot from usb is not supported. This is wrong!
More precisely, this is not always the case. The only correct solution is to refer to the manual (user manual) of your motherboard or using specialized software (AIDA64 as an option) to obtain a detailed report on the hardware used.
The second point is the size of the flash drive. Here everything will depend on what we write on it. For example, to create a Live-USB, Linux or Windows 7 installation disk, a 4 GB flash drive is enough. To create a bootable device with the latest versions of Windows, it is advisable to have a flash drive of at least 8 GB on hand.
The third point is transferring files from a flash drive. Typically, the process of creating a boot device involves completely formatting it. If there are important files on the flash drive, transfer them to another device in advance. To create a bootable USB flash drive and then work with it as a boot device, use the USB-2.0 port (Windows 7 does not support USB 3.0).
How to create a bootable USB flash drive
Let's look at five different methods using five free programs for Windows as an example.
A small but quite functional utility with the self-explanatory name WinSetupFromUSB. Equally well suited for recording a bootable and/or multiboot flash drive (up to 10 operating systems) and creating Live devices. Official site .
Among the shortcomings is the lack of support for the Russian language. Among the advantages, as I already said, is its versatility. The utility can work not only with Windows distributions, but is also suitable for burning an installation disk with Linux.
The usual option for creating a bootable flash drive, for example, with a Windows distribution, involves selecting the flash drive itself, the option to automatically format the media, and the ISO image of the operating system in the appropriate boxes. The recording process starts after pressing the “Go” button. You can read more about how this program works.
To create a multiboot flash drive (several OS), you need to specify the path to the ISO images of the operating systems. At the time of writing this article, the Windows 10 selection item is missing by default, but in reality everything is written and works, you just need to select the appropriate box with the available versions - Vista, 7, 8.
2. Rufus
Perhaps the simplest solution for creating bootable USB drives. Everything is simple and intuitive. Suitable for working on systems that do not have an installed OS. Official site rufus.akeo.ie.
The main advantages are speed, simple interface, Russian language. An excellent solution if you need to create a bootable Windows 10 USB flash drive with UEFI support. By the way, I wrote in detail about how to do this in.
Distributed in the format of a regular installer and a portable version. To create a bootable USB flash drive, in the utility window you need to specify the path to the ISO image to be written and click the “Start” button.
On new systems that use UEFI instead of BIOS, set the Partition Scheme and System Interface Type menu to GPT for computers with UEFI.
In other cases, the default settings will be sufficient. The option to format a flash drive is assigned by default.
3. Windows 7 USB/DVD Download Tool
This utility is an official application from Microsoft. The interface is minimalistic, simple and clear, it is easy to work with. Download from the official website wudt.codeplex.com.
Perhaps the name of the utility (Windows 7 USB) will mislead many that with its help you can only write the Windows 7 distribution to removable media. However, this is not the case. In addition to the seventh version, Windows 8.1 and 10 distributions can be stored on a flash drive.
The downside is that the utility is not Russified, but the simple and intuitive interface is designed to offset this drawback.
All that is required from the user is to insert a USB drive in advance, select an ISO image with the operating system and specify the path to the media (flash drive) to which this image should be deployed.
The operating principle of this program is based on standard tools of the Windows operating system - these are “diskpart”, “bootsect /nt60”, unpacking ISO onto a flash drive. The program acts only as a graphical interface.
UltraISO is one of the best and most functional programs for working with disk images. A universal “harvester” that supports work with almost any known formats. Can work in tandem with Nero Burning Rom and integrates with virtual emulators. It will help if the boot disk image is not in ISO format.
The program can convert other image formats into ISO files - NRG, MDF, MDS, IMG, CCD, etc. With UltraISO you can edit ISO files without unpacking them. The UltraISO interface has been translated into many languages, including Russian. For downloading, you are offered several editions of UltraISO, adapted for individual versions of Windows, as well as a portable version of the program. Download link www.ezbsystems.com.
By and large, the program does not care what boot devices will be created with its help, with what operating system, what software and from what manufacturer. The ISO image to be burned must be opened in the program window either using the Open command in the File menu or using the browse button on the toolbar. This can also be done using the Ctrl + O key combination.
Then in the window that appears, if the program automatically selects the desired flash drive, you should click the “Burn” button.
Daemon Tools Ultra is a professional tool for working with images. The program itself is familiar to many users from the free Lite version, which allows you to mount virtual drives for reading disk images. Its more functional version - Daemon Tools Ultra - offers, among other features, the creation of boot devices.
Among the disadvantages, it is worth noting that it is paid, but to create a bootable flash drive, you can download a free 20-day trial version on the program’s official website. Official website of the program.
Go to the official website and download the program. During installation, you must select a trial license type.
The program works with a huge number of disk image formats and can be used both to create a boot device with subsequent installation of the operating system, and to restore it (Live disk).
To create a bootable flash drive, in the main window of Daemon Tools Ultra, select the “Tools” menu item, and among its commands is “Write bootable image to USB”. Or the hotkey combination Ctrl+B.
In the recording parameters window, specify the path to the image, enable the MBR overwrite option and click “Start”.
When the flash drive is ready, all that remains is to boot from it. The easiest way is to use the boot menu keys. The table below shows a clear example of such keys.
Of course, this is not the entire list of programs designed to create bootable devices, but for the vast majority of users, the capabilities and functionality of the listed software will be sufficient.
For example, the Rufus program can be used as the simplest and fastest tool for creating a bootable USB drive with one Windows distribution or for flashing BIOS from DOS.