Digital set-top box menu. What is digital television? Setting up digital terrestrial channels on your TV

Instructions

Transfer speed – 6900 sim/sec.
If you want to search for HD quality channels, change the frequency value to 338 MHz.

After installing and running any of above programs, a menu will open in front of you to access hundreds of channels, to view which you do not need to additional settings– just select any of the channels and start watching. The interface of all programs is intuitive and it will not be difficult for even novice users to get used to it.

Video on the topic

Sources:

• how to set up internet tv

Those who use the Internet can perform network scanning. This will make work safer and more reliable. carried out using special programs. For example, The Network Mapper, or Nmap for short, is an excellent utility for scanning networks. It has several scanning methods.

You will need

• Personal Computer, The program Network Mapper

Instructions

To specify the hosting to be scanned, specify its name or address in command line after specifying the options. To scan IP subnets, enter the parameter "/" after the name or IP address of the host that will be scanned.

You can search manually: select the “Menu” subsection “ Manual search channels." The “Reset channels” function will delete everything previous settings channels. You can also sort channels, group lists, or move a channel to . This is done through the “Sort Channels” option. Confirm each innovation with the “OK” button.

If you want to watch electronic programs transmissions (EPG), press the “EPG” button on the remote control. The screen will show 2 lists: at the top - a list of channels, at the bottom - a list of programs for the channel. To move through the list, use the “up” and “down” control buttons on the remote control. To exit the “EPG” menu, press “Exit” on the remote control remote control.

note

Some TVs do not have an RCA connector, then select the SCART/SCART connector.

Sources:

• tune digital channels on TV

TV- tuners are special devices that allow you to view personal computer cable or broadcast television. Currently, there are many types of TV tuners on sale, but the setup for all of them is almost the same.

You will need

• - TV tuner;
• - driver;
• - a program for viewing a TV signal.

Instructions

Select TV tuner. This stage is perhaps the most important thing in setting up the device. The fact is that not all TV tuners may be suitable for your computer, especially if they do not have own program to watch the video. There is a device with internal board, connected through a free Ethernet port on the router and connected to a USB or IEEE 1394 port on a computer. Determine which type is suitable for your PC or laptop. If necessary, purchase a special adapter.

Connect the TV tuner to your computer or laptop. This step depends on what type of device you purchased. If you doubt your actions, read the operating instructions that should come with the TV tuner. Check that the connectors are connected correctly.

Turn on your computer or laptop and insert the driver disk that came with the TV tuner into the drive. If there is no such disk, then necessary files You can download it online from the device manufacturer's website. If you have an operating system installed Windows system 7, then in some cases it will prompt you to download the required updates.

Install software to watch television channels. It is on the disc sold with the TV tuner. If you don't have one, you can configure the device for Windows Media Center or download a suitable viewer on the Internet. In the first case, it is necessary to check the compatibility of the TV signal transmitted by the TV tuner and received Windows program Media Center. You can find similar information on the website http://windows.microsoft.com/.

Connect the TV tuner to your cable TV or antenna. Launch the program to receive a TV signal and press the channel scan button. If you completed all the previous steps correctly, a list of television channels will appear. Otherwise, check that the TV tuner is connected correctly.

Video on the topic

Sources:

• setting up a TV tuner

On computer can be viewed TV any type - cable, satellite, Internet TV. Each of these types of TV has its own advantages and disadvantages, but if we talk only about the quality and stability of the video image, then we can arrange them in this order in descending order of characteristics - cable TV, satellite, Internet TV.

You will need

• - computer;
• - TV tuner;
• – DVB card;
• – satellite equipment;
• – unlimited high speed connection to the Internet.

When a new level of data transmission quality appeared, the DVB-T2 digital television network was launched. Digital television provides high quality pictures and an excellent transmission signal. But to set up a connection to this network, you need to have necessary knowledge, choose correct receiver and set it up well.

How to connect the T2 module and configure it will be described below.

How to connect a T2 set-top box to a TV

The T2 tuner is quite easy to connect to your TV. If you have experience connecting players, antennas and other devices to your TV, then connecting the receiver will not be difficult.

We connect the antenna to the receiver, and from it we connect the wires to the TV. This can be done using standard HDMI wires, "tulips" or SCART. The most important thing is that you don’t have to pay to call a specialist. However, if the master can connect the set-top box to the TV for free, then it’s worth leaving the matter to him.

How to connect DVB-T2 to a TV without a set-top box

To connect your TV directly to the DVB-T2 network without purchasing a receiver, you can immediately purchase a TV with a built-in DVB-T2 tuner. This saves space, time and costs. Among other things, you can control T2 channels with one TV remote control, while the receiver will have two remote controls.

Today, almost all LCD TVs have a built-in tuner, which makes connection easier. Simply insert the antenna into the desired socket.

How to set up DVB-T2 using a receiver

After installing and connecting the receiver, you need to set up the television. To do this, follow simple steps:

• We go to the console menu.
• Click “Quick setup”.
• If the default is another country, then set it to “Russia”.
• Then you must select the “DVB T2” standard. Often stands in the field DVB standard T/ DVB T2, which leads to the receiver looking for DVB T quality channels, and only then DVB T2. We need DVB T2 and its excellent quality.
• Then click “Auto Configuration” and everything will be done automatically.
• After finding the channels, you can also watch detailed information by connection quality by clicking the “Info” button.

This way you can set the receiver to receive all the right channels. But the setup does not always go smoothly. Sometimes problems arise.

What to do if DVB T2 setup does not occur

There are several options why the setup does not occur:

• The problem is in the receiver;
• The problem is in the antenna;
• The problem is with the TV.

First, try setting up using a different antenna. If it helps, then the problem is in the antenna, and if not, then the receiver is to blame.

If the antenna is to blame, then only a specialist can help. If the receiver, then several options are possible. Firstly, the receiver may have incorrect firmware. Then you need to reflash the console. To do this, go to the manufacturer’s website and download new firmware, write it to a flash drive and insert it into the receiver. It will update itself and the problem will be resolved.

If updating the firmware does not help, then the problem is most likely in the electronics. In this case, it is better to return the set-top box for service or replace it under warranty.

You can also check the TV itself. To do this, use the set-top box on another TV, and if it works, then the problem may be in the TV settings. In this case, you should contact the manufacturer. There they will be able to tell you how to correctly set the TV settings to connect the receiver.

How to choose a set-top box for DVB-T2

The choice among receivers is quite large. Here are the most popular receivers that are recommended to buy:

• Trimax TR-2012HD
• Strong SRT-8500
• Strong SRT-8502
• Thomson THT702
• Trimax TR-2012HD PVR (TR-2013HD PVR)

Their price starts from 1000 rubles and above depending on the functions. More expensive receivers have more fine adjustments, better reception signal, more various inputs to connect additional devices, and they also work faster. Compared to satellite set-top boxes, the DVB-T2 receiver is inexpensive.

You can also go to any hardware store and there, on the spot, choose new receiver, after consulting with a specialist.

Widespread modern television there was a stir, and therefore a lot of questions, how to setup digital television . The reason for its popularity is the variety of channels in terms of direction, quality, language, type of content, etc. Due to the lack of information on setting up digital TV, companies have appeared like mushrooms after rain, charging fees for these manipulations. You don’t have to pay at all, you can actually achieve the goal on your own.

How to set up digital television on a TV - general provisions

Mostly all the methods for setting up digital television reception use approximately the same scheme, but due to the variety of manufacturers, the actions may be slightly different, but their logic is similar. In order not to get confused in all the sequences, it is worth applying the algorithm directly to each TV model. Thanks to logic and intuition, you can correctly configure the settings on almost every TV model using the instructions provided.

1. Take the remote control and expand the menu;
2. Proceed to the “Options” item;

1. Next, you need to activate “Auto Configuration”. With this action, a window appears containing information about signal sources, it can be cable or antenna signal. In our case, we need to select a cable;
2. At the end of the operation, information about the quality of signal reception should appear in a new window, here you should select “Digital”, then click “Start”;
3. The final setting point is “Search mode” and select the method for detecting channels. The proposed fields must be filled in with information. The frequency is 314 MHz, the speed is 6875 kS/s, and the modulation is 256 QAM.

More advanced TV models allow you to network search who will do everything on his own necessary actions. When will be selected necessary method to detect TV channels, you need to click on “Search”.

If this instruction is not effective, you should use detailed algorithm for TVs from LG. The technique is relevant for almost all models of the manufacturer.

1. From the remote control go to the Menu;
2. Click on “Options”;
3. In the “Country” category, change the checkbox to Finland or Sweden;

1. Then go to the “Settings” category and launch “Autosearch”;
2. You need to enter a search method in the fields, usually this is enough fast type, frequency - 298 MHz, modulation - 256 QAM, symbols - 6952, ID - auto;
3. If everything is done correctly, then during the search a number of TV channels will be displayed;
4. Manufacturer LG integrates into the system automatic system search and update TV channels. This function can be inconvenient as the prepared list will be reset regularly. To prevent this phenomenon, be sure to go to the settings for connecting via cable and turn off “Auto channel update”;

1. For convenient sorting, you need to remove the check mark from auto-numbering in the “Cable” section in “Autosearch”.

Now let’s look at the Samsung method, because the manufacturer is one of the most popular in the industry. The actions are like:

1. Press Menu on the remote control;
2. Next, go to the “Channel” category (there is a satellite dish on the icon);
3. On the right you need to select the “Antenna” option, and in the type field - “Cable”;

1. Now in the “Country” section you need to set “Other”, now you will need to enter a PIN code, by default 0000;

1. Go to the “Auto-configuration” menu and specify the source of the signal – “Cable”;

1. You need to specify the parameters, they correspond to the data in the first one, general example articles, and click “Search”;
2. Now the TV will find all TV channels.

How to set up digital television on Smart TV

Digital television: how to set up channels on a TV with Smart function let's look at Samsung example. The action is performed fairly standardly, but there are some differences.

1. Go to the “Channel” section in the Menu;

1. Click on “Country”, you may now need to enter a PIN code, by default 0000, 1111 or 1234;
2. Follow the "Other" section;
3. Then, step back, select “Cable search options”;
4. Standard parameters are now being introduced;

1. Again you need to go to “Auto Configuration”, here select the “Cable” source mode;
2. You need to activate the “Digital” section;
3. Using the search mode, select “Network” and activate the setting.

All methods allow you to create a high-quality connection to digital TV channels and find the maximum available quantity interesting programs. Despite the lack of data on devices from Toshiba, Philips and others, the connection method is no different.

If you have any questions about the topic " detailed instructions on setting up digital television", you can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>

Our company’s specialists will quickly and efficiently connect and configure free tv channels analogue and digital terrestrial television, which are broadcast by the Russian Tele and Radio Broadcasting Network from the Ostankino TV tower.

TVs and television receivers - terrestrial television tuners (set-top boxes) are connected. Our service covers all areas of Moscow.

Terrestrial television. How to watch TV channels for free

On the territory of Moscow and the region with Ostankino, the Russian television and radio network RTRS. RF transmits 19 analog and 3 packages (30 units) digital free channels terrestrial TV. This makes it possible to accept without registration and payment subscription fee Russian television programs. Reception is carried out on individual, located in the room, or external television antennas. The receiving antenna can be a simple wire, the length of which reaches 1-2 meters. Broadcasting is carried out using meter and UHF waves. TV channels that are broadcast can be viewed for free.

A list of suggested frequencies of free terrestrial TV channels will help you set up your TVs. If the broadcast frequency of a particular terrestrial television channel is indicated, this will speed up the setup of televisions that do not have an automatic channel sorting function. With such information, it is easier to tune TV channels on outdated TV models with incorrect operation of automatic frequency adjustment systems for the local oscillator APCG. The table has analog frequencies that are needed for free viewing TV channels on TV. Our website allows you to download a list of free TV channels on terrestrial TV in Moscow.

List of free TV channels - terrestrial television.

1	First	49 C1
2	Russia 1	215 C11
3	TV Center	77 C3
4	NTV	191 C8
5	Russia Culture	567 C33
6	Match TV	175 C6
7	Pepper	483 C23
8	Moscow region	503 C25
9	STS	519 C27
10	Disney	535 C29
11	Home	551 C31
12	TNT	583 C35
13	Friday	607 C38
14	Channel 5	655 C44
15	TV channel TV 3	671 C46
16	Ren TV	695 C49
17	YU	711 C51
18	Star	759 C57
19	2X2	783 C60

Digital terrestrial television

Free digital channels, coming from the television tower, is received by a special antenna for digital TV. To view such channels, you need to have:

• access to common external antenna(installed on the roof of houses);
• access to individual (external or small internal antenna UHF);
• TV available, as well as standard digital DVB-T tuner 2;
• providing MPEG 4 video compression standard and Multiple PLP mode. This may be a special device connected to the TV.

Initially digital broadcasts was carried out by the company rtrs.rf using the DVB-T system. Some regions are still using its services. Everything is going to the point that this system will be replaced by a new one digital terrestrial television broadcasting system DVB-T2. It was she who was accepted as the standard. TVs with set-top boxes with a DVB-T tuner will not allow you to view television programs V new system on-air television broadcasting.

1, 2, 3 multiplex digital terrestrial television - list 2016

We publish a list of free digital terrestrial TV channels, accepted in Moscow and the Moscow Region.

№	Essential digital television	Frequency digital channels	№	Digital terrestrial television	Frequency digital channels
The first multiplex of digital television in Russia RTRS-1
1	First	546 C30	6	Match TV	546 C30
2	Russia 1	546 C30	7	Carousel	546 C30
3	TV Center	546 C30	8	Channel 5	546 C30
4	NTV	546 C30	9	OTR	546 C30
5	Russia Culture	546 C30	10	Russia 24	546 C30
The second multiplex of Russian digital television RTRS-2
11	Ren TV	498 C24	16	Sport plus	498 C24
12	Saved	498 C24	17	Star	498 C24
13	STS	498 C24	18	World	498 C24
14	Home	498 C24	19	TNT	498 C24
15	TV channel TV 3	498 C24	20	Muz TV	498 C24
The third multiplex of digital television of Russia RTRS-3
21	Sports 1	578 C34	26	Euronews, Trust	578 C34
22	My Planet Science 2.0 Fight Club	578 C34	27	Music of the First	578 C34
23	History Cartoon Russian detective Russian bestseller	578 C34	28	A Minor, Kitchen TV, Auto plus, India TVHD Life, S TV	578 C34
24	Country Sundress	578 C34	29	LifeNews	578 C34
25	Mom, 24_DOC, IQ HD Amusement Park	578 C34	30	Our football	578 C34

IN first multiplex includes a set of 10 free TV channels, broadcast on the frequency of the 30th TV channel 546 MHz using the DVB-T2 digital terrestrial television system. The second multiplex includes a set of television channels received on 24th frequency channel 498 MHz in the DVB-T2 system. Third multiplex aired in 2015. The third multiplex of digital terrestrial television is transmitted in test mode on the vacant frequency 34 television channel, which previously broadcast in outdated system digital television DVB-T. In the latter you will find channels high definition HD.

Digital television dvb-t2 format coverage area of ​​the Moscow region

Digital television in the DVB-T2 format will soon cover the entire Moscow region. In March 2016 digital TV coverage area on the map includes the following digital terrestrial television transmitters:

1) Moscow, Ostankino - RTRS-1 546 MHz, broadcasting; RTRS-2 498 MHz, broadcasting.
2) Moscow Region, Volokolamsk - RTRS-1 778 MHz, broadcasts; RTRS-2 754 MHz, standby mode.
3) Moscow region, Zaraysk - RTRS-1 778 MHz, broadcasts; RTRS-2 770 MHz, standby mode.
4) Moscow Region, Shatura - RTRS-1 730 MHz, broadcasts; RTRS-2 754 MHz, broadcasting.
5) Moscow, Butovo-RTRS-1 546 MHz, under construction; RTRS-2 498 MHz, under construction.
6) Moscow Region, Istrinsky district, Davydovskoye - RTRS-1 546 MHz, under construction; RTRS-2 498 MHz, under construction.
7) Moscow Region, Ruza district, Morevo - RTRS-1 778 MHz, under construction; RTRS-2 754 MHz, under construction.
8) Moscow Region, Naro-Fominsk district, Pozhitkovo-RTRS-1 546 MHz, under construction; RTRS-2 498 MHz, under construction.
9) Moscow, Troitsky Autonomous District, Rogovo-RTRS-1 546 MHz, under construction; RTRS-2 498 MHz, under construction.
10) Moscow Region, Chekhov - RTRS-1 546 MHz, under construction; RTRS-2 770 MHz, under construction.
11) Moscow Region, Stupinsky district, Alfimovo - RTRS-1 778 MHz, under construction; RTRS-2 770 MHz, under construction.
12) Moscow Region, Voskresensky district, Bogatishchevo - RTRS-1 546 MHz, under construction; RTRS-2 770 MHz, under construction.
13) Moscow Region, Orekhovo-Zuevsky district, Likino - Dulevo-RTRS-1 730 MHz, under construction; RTRS-2 754 MHz, under construction.
14) Moscow Region, Shchelkovsky district, Petrovskoye-RTRS-1 546 MHz, under construction; RTRS-2 770 MHz, under construction.
15) Moscow Region, Sergiev Posad district, Mishutino-RTRS-1 546 MHz, under construction; RTRS-2 754 MHz, under construction.
16) Moscow Region, Dmitrovsky district, Podcherkovo - RTRS-1 546 MHz, under construction; RTRS-2 770 MHz, under construction.
17) Moscow Region, Dmitrovsky district, Novoselki - RTRS-1 546 MHz, under construction; RTRS-2 754 MHz, under construction.
18) Moscow Region, Mozhaisky district, Otyakovo - RTRS-1 778 MHz, under construction; RTRS-2 754 MHz, under construction.
19) Moscow Region, Shakhovsky district, Zhilye Gory - RTRS-1 778 MHz, under construction; RTRS-2 754 MHz, under construction.
20) Moscow Region, Stupino - RTRS-1 778 MHz, under construction; RTRS-2 770 MHz, under construction.
21) Moscow Region, Ozyory - RTRS-1 778 MHz, under construction; RTRS-2 770 MHz, under construction.
22) Moscow Region, Egoryevsky district, Kuzminki - RTRS-1 730 MHz, under construction; RTRS-2 754 MHz, under construction.
23) Moscow Region, Serpukhov - RTRS-1 546 MHz, under construction; RTRS-2 770 MHz, under construction.
24) Moscow Region, Klin - RTRS-1 778 MHz, under construction; RTRS-2 754 MHz, under construction.

How to watch DVB-T2 digital television for free?

The main task is that you need a regular decimeter antenna directed towards Moscow, not a house antenna. This could be a regular antenna cable. If the cable does not pick up a signal, you can buy a UHF antenna - there are many different ones and the price ranges from 300 to 1000 rubles.

If your TV does not support DVB-T2, you can buy an external tuner. It connects to any TV and costs around 1000 rubles.

In order to watch both analog and digital channels, you will need a signal mixer - the video has one.

How to connect a DVB-T2 set-top box to a TV? Connecting and setting up digital television is not very good difficult task, anyone more or less literate in technical issues man.

Standard equipment for digital set-top box

• user guide;
• RCA cable (“tulip”) with characteristic connectors allows you to connect set-top boxes to almost all modern models TVs;
• decryption and conversion device digital signal to analog (receiver);
• remote control (RC);
• batteries for PU;
• network adapter.

U different brands And different models devices, the basic configuration may have different variations (for example, instead of a “tulip” there may be an HDMI cable), but in general the kit consists of exactly these elements.

The rear panel has connectors:

• antenna input;
• connection socket satellite dish, UHF antennas or local operator cable;
• HDMI cable socket for connecting a monitor or TV;
• tulip cable sockets.

Some devices may be additionally equipped with a “Scart” connector, to which a TV or DVD player with video recording function can be connected.

The process of connecting a DVB-T2 set-top box to a TV is in many ways similar to the connection procedure satellite receiver or AV receiver. There are a few different ways, how to connect the t-2 set-top box, how to connect the monitor to the set-top box. Each of them depends on the type of connector that is found on the two paired devices. You can connect the tuner via an RCA cable (usually called simply a “tulip”), via an HDMI connector, or via an antenna cable.

RCA cable

This is the simplest and standard way connecting a digital tuner to a TV. The picture quality in this case is very different from the connection via HDMI, but the differences are not so significant on large diagonal TVs.

Before connecting, you must disconnect both devices from electricity. After this, you need to insert the cable plugs into the sockets on the console. Each plug has its own color, so they must be inserted into the connectors of the corresponding color. The yellow cable carries a video signal, and the white and red cables carry 2 audio channels. After this, connect the outdoor or indoor antenna to the appropriate socket (on the set-top box it is designated as “RF IN”).

It happens that the set of wires does not include a “tulip”, but there is a “SCART” connector, which is popularly called a “comb”. In this case, you will need a special adapter from RCA to Scart. You can connect a satellite receiver in the same way.

HDMI connector

HDMI interface is capable of transmitting signal High Quality. For example, the quality of the video signal can be up to 1080p, and the audio signal – 192 kHz. This corresponds to the most high standards in the field of multimedia content.

If you have modern TV, and it has an HDMI connector, then it would be advisable to connect the receiver through this interface. The same can be recommended for satellite tuner to watch high definition television.

Setting up channels

The number of channels depends on whether you will use paid package services of a single operator, or regular broadcasting will be enough for you. For regular TV there are about 20 free TV channels available. If this is not enough for you, then to view encrypted broadcasts you will need to purchase a CAM module, which is built into the receiver. A provider card is inserted into the CAM module, which, for a fee, provides access to a large list of digital TV channels.

Setup: turn on the TV (if the set-top box is already connected), switch the TV to “AV” mode, go to the tuner menu.

The default set-top box does not have a list of digital TV channels, so you will have to look for them yourself. To do this, it is recommended to use “Autosearch”, which will independently find 10-20 channels. If the tuner can find them, it will offer to save the list. The entire setup algorithm is similar for different device models, but each has its own nuances.

Connecting the set-top box to the TV

Before connecting digital set-top box To connect to the TV, you need to decide on the choice of receiving device - antenna.

There are antennas different types and types. When choosing the right one, they are usually guided by several criteria, the main one of which is the distance to the transmitting TV tower. The antenna can be either indoor or outdoor. For the DVB-T2 standard, the antenna must be of the decimeter range (UHF), namely, it must receive frequencies from 470 to 860 MHz. Indoor antenna will only work well within a city where there is a transmission tower.

It happens that DVB-T2 does not find channels. This may happen for the following reasons:

• the antenna does not receive a digital terrestrial television signal (does not receive the UHF band);
• the hardware software is not up to date;
• the equipment does not support the DVB-T standard

Most often, people who try to connect through a home antenna encounter a lack of signal. Here you can’t guess in advance whether such an antenna receives a signal in the UHF range or not. To do this, you need to call the company that services the antenna and find out. But it's best to have your own antenna.

Connecting the set-top box to older TV models

The connection method via an antenna cable is used in cases where the TV does not have any other connectors other than the antenna input (in older TV models). In this way, you can connect the tuner to an old TV by plugging the cable into the socket called “RF OUT”. In this case, the image quality will be much worse than when connected via HDMI interface. But given that the TV is old, such an image can be considered quite acceptable.

For cable connection digital TV for an old TV you will need a piece of antenna wire of the appropriate length, as well as two antenna plugs. To avoid using a soldering iron, you can use special F-connectors. To do this, you need to clean the insulation from antenna cable(very carefully so as not to damage the shielding braid). You need to strip the end about 1.5 cm long. After this, bend the braid and remove the insulating material from the central core. Strip 10 mm from the center wire. Screw the connectors clockwise until the center core protrudes 2 mm from the connector. Use the resulting cable to connect the antenna input of the TV to the corresponding output of the set-top box.