Wireless wifi router n300. Multifunctional equipment capabilities

New generation routers are becoming more and more complex design, becoming, at the same time, easier to use and configure, so an article on how to configure a NETGEAR router using the example of the NETGEAR N300 model will be useful to many. Today, even an ordinary user is able to create a wired or radio connection to the Internet, holding in his hands step-by-step algorithm actions.

Preliminary preparation of devices

To start connecting the n300 router to the Internet, you need to perform a number of preliminary operations:

Connect the power supply to the rear panel and turn on the device;
Insert the WAN cable and connect the PC using a second switch cable (inserted into one of the five dedicated ports);
Press the power button, which is moved to the front panel for this model.

After these manipulations, the indicator lights should indicate that the device is turned on in one of the ports and connected to the router power cord, which means: you can proceed to software configuration.

It starts with setting automatic IP acquisition and DNS addresses router. To do this, we need to get into the settings panel of the wired and wireless network adapter. The algorithm for Windows 7 and 8 is as follows:

Cry right click mouse by icon network connection in the right corner of the monitor;
Open the Control Center and side menu select adapter settings settings;
Right click – properties of the current cable connection;
In the window that opens, look for the line of settings for the fourth version of the Internet protocol, open the properties (by clicking on the button a little lower);
The settings selectors for both items in the new window must be set to automatic;
Save the settings and close open windows.

Setting up the modem

To get to the router’s web configurator area and connect to the Internet, you need to address bar any browser enter the following ip – 192.168.1.1

To enter the settings, open your browser and enter the address: HTTP://192.168.1.1

Then in the form that appears, enter the login “admin” and password “password”. Click on Ok and get to the main settings menu. A special feature of the Netgear n300 model is that the instructions for setting up the connection will differ for different Internet providers. And the first difference is the presence of dynamic or static IP.

If your provider (and most of them) works with dynamic ip addresses(that is, you are assigned new address for each new session), then the setup should proceed as follows:

In the menu on the left, select Internet;
We refuse to enter information when connecting to the Internet;
In the name account and we don’t specify anything about the domain;
Specify automatic acquisition of IP addresses and DNS servers;
In the event that the provider does not work with binding to MAC addresses, leave this settings item with the default value and set the “address of this PC” otherwise;
Save the changes and check the connection is working.

If your supplier uses a connection using the PPPoE protocol, for example, like Rostelecom or DOM.RU, setup is carried out as follows:

Open the Internet menu item;
In the first selector we set the value to “Yes”;
Next, select the connection type “PPPoE”;
Below we indicate the authorization data that the provider provided to us in the contract;
The network connection mode must be constant, so “Always on”;
Just like in the previous case, we select automatic installation addresses;
If your provider is Dom.ru (it uses binding to MAC addresses), set the selector to use your computer’s address in the last setting item;
We save the results and open any site to check.

If your provider uses an L2TP connection, as is the case if your operator is Beeline, the instructions above will change as follows:

Instead of PPoE, select the connection type for your router - L2TP;
We manually enter the server address of the Internet provider (for Beeline this is tp.internet.beeline.ru).

Otherwise, we use the same settings (without binding to the MAC address of your device). We check the automatic receipt of IP and save the changes. After that wired network The Netgear n300 router should work.

Wi-Fi setup

In order to connect wifi network On the n300 model, follow these steps:

Open the item from the menu on the left “Wi-Fi network”;
A new window opens: in the line with the name, set the name for your wireless connection;
Channel selection can be left automatic, or you can set eigenvalue, if there are many other wireless networks around;
The connection mode should pass up to 300 Mbit/s;
In the security settings, select the last selector (the most advanced encryption type);
In the area for specifying the password, enter our key, which should contain numbers and letters (preferably in different case);
We apply the changes and try to log into a website via wifi.

How to update the firmware?

To ensure that the router can be connected to the Internet without problems in the future, you need to install latest version Software, that is, reflash the device. This is done in several stages:

The first step is to go to the manufacturer’s official website and download the latest firmware version, for example jwnr2000v2;
We disconnect the device’s Internet cable, but leave the one that connects it to the computer;
Go to the device settings menu, click on the firmware number in the page header;
Select the update file on your computer by clicking the Browse button;
We load, wait until the router reboots and we can go into the settings again;
Download the configuration file from the official website or from disk;
Select the “Manage settings” item in the router menu, then “Restore settings”;
Loading from a computer required file and wait for it to install.

Then try going to the settings page again, and then insert the WAN cable (Internet) and log into any website. If everything works, congratulations! You managed to connect the Internet to your Netgear router yourself.

If something goes wrong, you can return the settings to factory settings. For this purpose, there is a Reset button, holding which you need to wait 10-15 seconds. Then we release it and wait for the n300 to start. After this, you can try setting up the Internet again and updating the firmware.

Found a typo? Select the text and press Ctrl + Enter

In order to get to the router’s web interface, you need to open your Internet browser and type 192. 168.1.1 in the address bar. In the window that appears, enter “admin” as the username and “password” as the password.

When you log in, the software update check page appears.

After updating, if required, you will be taken to the installation wizard. If the router has not been configured until now or was in the factory settings state, then you will see the Settings Wizard page. There are two installation options to choose from. We will look at setting all the necessary parameters manually

When asked by the wizard, select " No. I want to configure the router myself." and press " Next>".

Changing the factory password

For security reasons, it is recommended to change the factory password. To do this, go to the menu " Set password" and specify the default password as the password, that is, " password", and as the new password your desired password. And click on the button " Apply". After applying the new settings, you must log in to the system again by entering your New Password .

Setting up an Internet connection

Depending on your provider and its settings, you must select one or another connection mode. Let's consider each of them in order.

Setting up a connection in DHCP mode (dynamic IP)

The first mode is DHCP mode, which automatically receives network settings from the provider. In this case, you must select “No” to the question “Do I need to enter connection information when connecting to the Internet?” and specify “Obtain dynamically from the Internet service provider” for the “Internet IP address” field (this field is not visible in the figure) and “Obtain automatically from the Internet service provider” for the “DNS server address (domain name server)” field. If your provider uses MAC address binding, and you are setting up a router from a PC that was previously connected to the Internet, then for the “Router MAC address” field, specify the “Use computer MAC address” option. If the provider does not have a MAC address binding, then leave the default option - the “Use default MAC address” option. And click the "Apply" button.

After applying the settings, we can successfully use the Internet.

Setting up a connection in static IP mode

The second mode is static or otherwise fixed settings, which are usually specified in the contract concluded with your provider. For settings this mode Similarly, we answer “No” to the question “Do I need to enter connection information when connecting to the Internet?” and indicate the option "Use static IP address" in the "Internet IP address" field. Next, you need to enter the settings that your provider provided to you. For example, IP address: 10.0.0.100; IP subnet mask: 255.255.255.0; Gateway IP: 10.0.0.1. In the DNS server address (domain name server) field, indicate “Use these DNS servers" and enter: the IP address of the main DNS and the IP address of the secondary DNS, if we have one, for example: 10.0.0.1. Similar to the setup case in the first mode, we select to use the computer’s MAC address if the provider uses MAC address binding. Or we leave it to use the default MAC address if there is no binding. Then click the "Apply" button.

Configuring PPtP (VPN) while automatically obtaining a local IP address (DHCP)

This is a type of VPN connection. To configure it, you must select “Yes” to the question “Do you need to enter connection information when connecting to the Internet?” and select “PPTP” from the drop-down list of Internet service providers. If you want the router to always remain connected to the Internet, select as connection mode “Always on” Otherwise, you can set an inactivity interval in minutes, after which the router will automatically disconnect from the Internet, or you can select it completely. manual connection via the web interface.

The "PPTP" protocol requires not only a mandatory username and password, and the VPN server address for connection, but is also divided into two variants common in Russia. Their difference is in how the settings for connecting to local network provider: dynamically via DHCP protocol or are set statically by the user. In both cases, you must first indicate your login in the “Username” field and your Internet password in the “Password” field. Then you need to specify the server address in the "Server Address" field. The server address can be in the form of an IP address, for example, 10.0.0.138 or in the form of a domain name, for example, vpn.internet.beeline.ru.

Setting up PPtP (VPN) with a static local IP address

If you have access to the provider's local resources, you need to configure Extra options connections. If they are obtained automatically or the provider did not provide them to you, then usually you do not need to enter anything additional! If you have data indicating the IP address, subnet mask, gateway and DNS servers, then you must enter them in the appropriate fields: “My IP address”, “Subnet mask”, “Gateway IP address” and “Main DNS ", "Additional DNS" (some fields are not visible in the figure). If your provider uses MAC address binding, also select the “Use computer MAC address” option. Then click the "Apply" button.

Setting up a PPPoE connection

The "PPPoE" connection mode is completely similar in its settings to the previous modes. We fill in the columns “User name” and “Password” (we take the data in the agreement with the provider), “Service name” - enter any name for the future connection. “Internet IP address” - put a dot on “Get a dynamic one from your Internet service provider.”

After selecting the mode of the required Internet connection and the appropriate settings, the router should automatically connect to the Internet. You can verify this by going to the “Router Status” menu and clicking the “Connection Status” button.

Setting up an L2TP connection

Connection type - L2TP
Username and Password- login and password from the contract
Connection mode- Always on
Server address- enter the IP address or name of the VPN server according to the contract
DNS server IP address- receive automatically from the provider
Router MAC address- use default address
The remaining parameters can be left unchanged. Click Apply.

Setting up Wi-Fi on the router

To configure protection wireless network you need to go to the "Options" menu wireless connection". Here you can set given name network, which will be visible to wireless Wi-Fi devices. Leave the region as "Russia". Number wireless channel It is also recommended to leave it unchanged in the “auto” mode. You also need to set the connection mode and security parameters. As a connection mode, it is recommended to use the maximum possible mode, if you have appropriate wireless adapters that support new standards with operating speeds of up to 150 or 300 Mbit/s. Otherwise, it is enough to specify a mode of up to 54 Mbit/s. It is recommended to use the most modern security modes, for example, WPA2-PSK with encryption, as it gives maximum performance and network protection. After selecting this mode, you must set a password phrase that will be used to connect all wireless wi-fi devices to the router. Try to use a difficult phrase and write it down! Using combinations like "qwerty" or "1234567" can be hacked by attackers in a matter of seconds. After entering the passphrase, click the "Apply" button and securely connect your wireless devices, PC to the router using given key security.

Forwarding and port forwarding

Let's go to Additionally - Port Forwarding/Port Initiation.

Click Add own service . Service name- name of the service being created Service type- select the protocol you need External start/stop port And Internal start/end port- port range Server IP address - network address device to which the request will be redirected Click Apply.

Today, the secret of the router in domestic markets is clear. The advantages of such devices are low cost and large set useful functions. However, nothing more is required for the modern owner.

Due to these two significant criteria, the new Netgear N300 was on par with similar D-Link devices, TP-Link, ASUS and other brands that are very popular among users.

The best option for home use

The Netgear N300 WNR2200 modification is intended for ordinary users who need to organize a local network that supports Wi-Fi and cable connections. Thus, given the affordable price of 1,100 rubles and great functionality, this router is quite attractive in the network device market.

In addition to a wireless access point, as well as a four-port hub, the router has one USB port that can support work with a large number known devices:

3G/4G modems;
printers;
external drive or a USB flash drive for storing files.

This router supports encryption of the wireless communication channel and provides protection against hacking to all connected devices via Wi-Fi. Thanks to the built-in monitoring of Internet traffic, the user is presented with reports on the connections of all local network equipment. Besides, intelligent system protection automatically blocks suspicious resources and devices.

Equipment and appearance

The manufacturer has provided a standard configuration for the router, which future owners will like. It includes the following:

Model Netgear N300;
setup instructions;
patch cord;
power unit;
USB extension cable;
stand for easy installation.

Owners are pleasantly surprised by the presence of a small extension cord designed to connect USB devices. This is evidenced by user reviews. It is worth noting that this is not an ordinary cord, as they are used to seeing it in everyday life. The connector required for connecting devices is presented in the form of a platform with relatively large sizes and mass. This makes it possible to hold the equipment on the surface where the user wants to place it.

It must be admitted that this is particularly convenient when connecting wireless modems. Appearance The router resembles a similar device included in the budget class. It has an ordinary box, no different from its competitors. The only thing is that there are many ventilation holes on the side edges and bottom of the router. Thanks to them, excellent cooling of internal components is ensured. As is usually the case with inexpensive routers, this model does not have external antennas.

Ease of setup

Setting up the Netgear N300 is easy if you follow all the steps according to the instructions. Provided standard access from any browser at 192.168.1.1 with the need to enter a login (admin) and password (password). As a result, the user is taken to the control menu wireless point access. The most important thing in in this case− don’t get confused and remember one thing: there are not many settings, but their manufacturer detailed description in the form of interactive tips.

Market leader in multifunctional routers

The Netgear N300 JWNR2000 modification should satisfy all users with high requirements when creating a high-speed local network for home use or small office use. The manufacturer has equipped the standard package with a Wi-Fi to Ethernet wireless adapter, which makes it possible to connect to the network stationary equipment. It could be Personal Computer or plasma panel. If there are several devices, the user will be able to purchase a similar module in the store.

Quite an interesting implementation if there is no possibility of laying cables throughout the room. Main disadvantage of this device is that no network hub, intended for wired connections. However, according to the owners, only one connector looks poor. The manufacturer claims that wireless interfaces will soon be replaced by the technologies of the last century. It is also important to remember that similar routers are limited in speed for wired interfaces, which is only 100 megabits per second, while Wi-Fi is capable of transmitting data three times faster.

Multifunctional equipment capabilities

The Netgear N300 router of the JWNR2000 series is distinguished by honest data transmission at a speed of 300 megabits per second, since the manufacturer introduced a system at the hardware level that is capable of building independent tunnels with connecting devices. They provide reliable data transmission. The Wi-Fi to Ethernet adapter uses directional radio antenna technology, which allows the signal to minimal losses pass through several reinforced concrete walls. Thanks to the built-in torrent client, USB hub with print server support, a large number protective systems, as well as firewalls, data encryption, guest WPS connections and others modern technologies the new product looks quite attractive in the eyes of users. Does the job and the affordable price installed on the devices. It is only 3,000 rubles and clearly contributes to consumer affordability at domestic market.

Difficulty in setting up

Most owners are interested in the management process of this pretty complex system. Thus, you should carefully understand how to configure the Netgear N300 router and wireless adapter, which comes included. The instructions describe in detail each user step provided for correct settings router. It is worth noting that the actions performed are similar to those carried out with other devices from this manufacturer. There is the same interactive menu, where there are a whole lot of tips and an intuitive interface.

True, there is not a word in the instructions about connecting the adapter. Reviews from owners indicate that most self-taught installers chose the easiest path, finding the WPS key on the adapter. This creates a secure connection over the guest channel. The scheme works, however reactivation computer, both devices should be synchronized again. According to professionals, it is better to do things a little differently. When you connect an adapter to your computer and search for a wireless network, you can authorize via Wi-Fi, as is done on a laptop or phone. Next you will need to write down the MAC address of the connected computer (or TV), go to the router settings and in the table trusted devices give full privileges to the required MAC address.

Portable devices

There is another equipment on the market from the popular manufacturer Netgear Wireless N300 Trek. It has proven itself when used by travelers and businessmen who are accustomed to the absence unnecessary wires. The device has a built-in battery from which it is powered. You can even charge the battery from a laptop. The convenience of the router lies in its miniature size. When the device is connected to a wired local network, the router automatically creates Wi-Fi network in room.

True, in this case, adjustment is also necessary. For this purpose, instructions are provided that are available in any language. It allows you to follow the setup procedure step by step. There are only two menu items that can be configured in just a few minutes. The owners believe that the router lacks support for a 3G/4G modem, since a repeater with similar functionality would be of great benefit when traveling when you need to connect not only a laptop, but also others to the Internet mobile devices. It is likely that in the future the manufacturer will definitely pay attention to user reviews.

Problems and their solutions

Most experts take into account timely updating of the Netgear N300 firmware. It turns out that on the domestic market there are many routers that have outdated version software. It is not difficult to guess that this gives scammers huge advantages for hacking. For example, all models with firmware that have the first serial number, have problems with unauthorized login. So after entering incorrect password access several times the device grants administrator rights.

This problem can be completely solved using firmware. To do this, by going to the control panel of the router, you need to visit the “Update” menu and indicate the latest software from the manufacturer's official website. The second problem is the ventilation system. Plastic grilles allow dust to pass freely. When it settles on the boards, it leads to overheating. Therefore, the router should be cleaned once a year or installed on a table (not on the floor).

Netgear routers are still rare in the post-Soviet space, but have managed to establish themselves as reliable devices. Most of the routers from this manufacturer that are on our market belong to the budget and mid-budget classes. One of the most popular are the N300 series routers - the configuration of these devices will be discussed further.

First of all, it’s worth clarifying important point– index N300 is not a model number or designation model range. This index indicates maximum speed 802.11n Wi-Fi adapter built into the router. Accordingly, there are more than a dozen gadgets with this index. The interfaces of these devices are almost the same, so the example below can be successfully used to configure all possible variations of the model.

Before starting the configuration, the router must be properly prepared. This stage includes the following actions:

After these manipulations, we move on to configuring the Netgear N300.

Configuring N300 family routers

To open the settings interface, launch any modern Internet browser, enter the address 192.168.1.1 and go to it. If the address you entered is not correct, try routerlogin.com or routerlogin.net. The login combination will be admin as the login and password as the password. You can find the exact information for your model at back side housings.

will appear before you home page router web interface - you can start configuring.

Internet setup

Routers of this model range support the entire main range of connections - from PPPoE to PPTP. We'll show you the settings for each option. Settings are located in points "Settings" — "Basic settings".

On the latest options firmware, known as NetGear genie, these parameters are located in the section “Add. settings", tabs "Settings" — "Internet Settings".

Location and name required options identical on both firmwares.

Connection by PPPoE protocol NetGear N300 is configured like this:

The PPPoE connection is configured.

A connection using the specified protocol is a VPN connection, so the procedure is slightly different from PPPoE.

Note! Some older NetGear N300 variants do not support L2TP connection, a firmware update may be required!

PPTP, the second VPN connection option, is configured as follows:

Dynamic IP

In the CIS countries, the type of connection using a dynamic address is gaining popularity. On Netgear N300 routers it is configured like this:

Static IP

The procedure for configuring a router for connecting via static IP is almost the same as for dynamic address.

As you can see, setting up both static and dynamic addresses is incredibly simple.

Wi-Fi setup

For the wireless connection to work properly on the router in question, you need to make a number of settings. Required parameters located in "Installation" — "Wireless Settings".

On Netgear genie firmware, the options are located at “Add. settings" — "Settings" — « Wi-Fi setup networks".

To configure a wireless connection, you need to do the following:

If all the settings are entered correctly, a Wi-Fi connection with the previously selected name will appear.

WPS

Netgear N300 routers support the option "Wi-Fi Protected Setup", abbreviated as WPS, which allows you to connect to a wireless network at the touch of a button special button on the router. You will find more detailed information about this function and its configuration in the corresponding material.

This concludes our Netgear N300 router configuration guide. As you can see, the procedure is very simple and does not require any specific skills from the end user.