Electronic clock VST: description, instructions. How to set up an electronic clock

I've been looking for an alarm clock for my room for a long time. I wanted something light or wooden, or both. I wanted some backlighting so I could calm down in the middle of the night, knowing how much sleep was left. Months of choice brought me to this watch.

Price almost at the time of purchase 180 rubles with discount (currently about 230)

Delivery time 1.5-2 months, everything came well packaged: a bubble bag and a box.

Why did I choose them?

Affordable price
Backlight
Alarm
Timer
Thermometer (both Celsius and Fahrenheit)
Possibility to choose alarm melody

Socket for 3 AAA batteries - little finger ones, easy to find, but work from 2(thrifty Chinese)

The watch is quite small, the size 12*6 cm.

There were also instructions in the box, but they were quite unclear. I have a decent level of English, but I’m not good with technology, so I spent several days figuring out the settings. To make your life easier, I want to briefly tell you how to set the date/time/temperature scale, etc.

So, let's set the time!

Click Mode , is displayed on the top of the display 24Hr . Click Up/Down - we see 12Hr. So we select a 12-hour or 24-hour time mode (by switching the buttons Up/Down )
After selecting the mode, press the button Set and set the time. I chose the 24-hour mode. The hour digits start flashing first. Again with buttons Up/Down We set the hour we need.
After setting the clock, press again Set and we are already setting the minutes.

Setting the date.
1. Immediately after setting the minutes, press Set and lights up year. Originally this is 2009. It also blinks, so the buttons Up/Down set the desired year.
2. Click Set , the second part of the display is already blinking. Install first month.
3. Click Set and choose what we need number. All digit switches are controlled by buttons Up/Down .
4. When you have set today's date, on the third part of the board you can see day of the week. If this is indeed that day, then congratulations, you did everything right.
  
  Setting an alarm.
  It's not that simple. Even if you didn't set the alarm yourself, you'll still have to get up to turn it off. The fact is that it is automatically installed on 0:00 , so it will ring at midnight.
  P.S. If you are not going to use the alarm on this watch, then when the format appears in the menu ALARM -:-- do not press under any circumstances Set.
  So, let's move directly to the installation.

Slap watch "Pulse"

Battery

Water protection

Caring for your watch

Modes:

1. Clock (hour, minutes, seconds) and date
2. Stopwatch
3. Alarm clock

The "B" button switches between editable parameters. The numbers are changed using the "C" and "D" buttons. Go back to the current mode - button "B".

Setting the time and date:

In time display mode, press button "B" 3 times, then use buttons "C" and "D" to set current time and date. Return to normal mode from the setup mode - press the "B" button.

Select between 12/24 hour time display - button "D"

Stopwatch:

In normal time display mode, press button "B" 2 times, start the stopwatch with button "D", stop the stopwatch with button "D". Reset the stopwatch: after it stops, press the "C" button.

Alarm :

In the time display mode, press the “B” button once, then use the “C” and “D” buttons to set the hours and minutes. When correct installation alarm, the alarm symbol will appear on the watch face. To turn off the alarm, press the "B" button once, then press the "D" button. The alarm symbol should disappear from the watch dial.

To return to normal mode from the setup mode, press the "B" button.

Backlight:

Button "A" turns on the backlight of the clock dial. The backlight is active when the "A" button is pressed and held. If you do not press any button within three seconds, the clock backlight will automatically go out.

Watch "Fast sport"

Watch "Electronic sports"

In the "Clock" mode you can edit:
- seconds
- watch
- minutes
- year (in current mode this parameter is displayed as the day of the week)
- month
- date
The transition between 12 and 24-hour time systems is carried out with the LIGHT/RES button.

In the "Alarm clock" mode the following can be edited:
- watch
- minutes
- month
- date

In the "Additional hours" mode the following can be edited:
- watch
- minutes
In this mode you can configure Extra time, above which the main time will always be displayed.
In the "Timer" mode you can edit:
- seconds
- minutes
- seconds
The transition between the "AUTO" and "MANUAL" modes is carried out with the LIGHT/RES button.
In Stopwatch mode:
Start and stop - ST-STOP button, reset - LIGHT/RES button.
If you do not press any button within five seconds When a value is flashing, the clock backlight automatically goes out.

Watch "Future"

Battery
The battery in the watch you purchase is factory installed and should be replaced at the first sign of power failure.
Water protection
The watch is not protected from water. Avoid exposure to any moisture.
Caring for your watch
Never attempt to open the case or remove the back cover.
The rubber gasket that protects the watch from water and dust should be replaced every 2-3 years.
If moisture gets inside your watch, have it checked immediately by your nearest workshop.
Do not expose your watch to extreme temperatures.
Although the watch is designed to withstand normal use, you should avoid rough handling or dropping it.
Do not fasten the strap too tightly. It should fit through your finger between your wrist and the strap.
To clean the strap, use a dry, soft cloth, or a soft cloth dampened with a mild, neutral detergent and water solution. Never use products that evaporate easily (eg benzine, solvents, spray cleaners, etc.).
When you are not using your watch, store it in a dry place.
Avoid contact of the watch with gasoline, cleaning solvents, spray aerosols, adhesives, paint, etc.). The chemical reactions caused by these materials cause damage to the gaskets, case and polish of the watch display.

Turning on the clock
The watch is turned on by pressing either of the two buttons once. Button "A" turns on the animated backlight of the clock, button "B" turns on the usual static backlight. By pressing the "A" button, the "Current mode" switches between modes in the following sequence:
- time (hours and minutes) - P
- date (month and day) - D
- day of the week - W
Setting the clock
The display is configured by successively pressing the “B” button and then the “A” button.
There are two ways to switch to editing mode:
Option 1. Press the top, then the bottom button.
Option 2. Press the bottom button twice.
The parameter being edited will begin to blink and you need to use the “A” button to set the desired position of the numbers. Next, use the “B” button to select the appropriate parameter and continue editing with the “A” button.
:
1. Hours (1-12)
2. Minutes (05-60 in 5 minute increments, four square dots in the center of the clock display will be used to set 6, 7, 8, 9 minutes)
3. Month D (1-12)
4. Day D (1-31)
5. Day of the week W (1-7)
6. Display backlight brightness (4 levels): adjustable by selecting the number of square dots
7. Display backlight time 60 (05-60 seconds)
If you do not press any button within five seconds When a value is flashing, the clock backlight automatically goes out. The screen turns off automatically after a specified time interval (05-60 seconds in 5 second increments).

Watch "Leg"

Battery
The battery in the watch you purchase is factory installed and should be replaced at the first sign of power failure.
Water protection
The watch is not protected from water. Avoid exposure to any moisture.
Caring for your watch
Never attempt to open the case or remove the back cover.
The rubber gasket that protects the watch from water and dust should be replaced every 2-3 years.
If moisture gets inside your watch, have it checked immediately by your nearest workshop.
Do not expose your watch to extreme temperatures.
Although the watch is designed to withstand normal use, you should avoid rough handling or dropping it.
Do not fasten the strap too tightly. It should fit through your finger between your wrist and the strap.
To clean the strap, use a dry, soft cloth, or a soft cloth dampened with a mild, neutral detergent and water solution. Never use products that evaporate easily (eg benzine, solvents, spray cleaners, etc.).
When you are not using your watch, store it in a dry place.
Avoid contact of the watch with gasoline, cleaning solvents, spray aerosols, adhesives, paint, etc.). The chemical reactions caused by these materials cause damage to the gaskets, case and polish of the watch display.
The clock is turned on by lightly touching the display:
1 time - time (hours, minutes)
2 times - date (month, day)
3 times - seconds
Setting the clock
1. Lightly touch the display to enter the “Current time” mode.
2. Touch and hold your finger in the center of the display - the parameter being edited will begin to blink. Now you need to change the numbers with light touches. Next, use repeated long touches of the display to switch from mode to mode and continue editing with light, short touches.
The clock display is configured in the following sequence:
1. Hours (1-12, A-am or P-pm)
2. Minutes (00-60)
3. Y (00-100)
4. Month D (1-12)
5. Day D (1-31)
(do not touch the display), the clock automatically returns to the “Current Time” mode and the blinking stops.
If you do not press any button within five seconds When a value is flashing, the clock backlight automatically goes out.

Watch "Original"

Watch "Touch"

Battery
The battery in the watch you purchase is factory installed and should be replaced at the first sign of power failure.
Water protection
The watch is not protected from water. Avoid exposure to any moisture.
Caring for your watch
Never attempt to open the case or remove the back cover.
The rubber gasket that protects the watch from water and dust should be replaced every 2-3 years.
If moisture gets inside your watch, have it checked immediately by your nearest workshop.
Do not expose your watch to extreme temperatures.
Although the watch is designed to withstand normal use, you should avoid rough handling or dropping it.
Do not fasten the strap too tightly. It should fit through your finger between your wrist and the strap.
To clean the strap, use a dry, soft cloth, or a soft cloth moistened with a mild, neutral detergent and water solution. Never use products that evaporate easily (eg benzine, solvents, spray cleaners, etc.).
When you are not using your watch, store it in a dry place.
Avoid contact of the watch with gasoline, cleaning solvents, spray aerosols, adhesives, paint, etc.).
Turning on the clock
The watch turns on by lightly touching the display once. By touching again, the “Current mode” switches between time (hours, minutes), date (month, day), seconds.
- time (hours/minutes)
- date (month/year)
- seconds
Setting the clock
1. Lightly touch the display to enter the “Current Time” mode.
2. Touch the right side of the display near “SET” to enter “Edit Mode”. The parameter being edited will start blinking. Now, lightly touch the left side of the display near “MODE” to change the numbers.
3. Next, by repeatedly touching the right side of the display near “SET,” you can switch from mode to mode. Editing continues with light touches or a continuous touch on the left side of the display near "MODE".
The clock display is configured in the following sequence:
1. Clock (1-12/1-24)
2. Minutes (00-60)
3. Month (1-12)
4. Day (1-31)
5. Year (2001-2099)
6. 12 or 24 hour time display system
If you make no changes in edit mode(do not touch the display), the clock automatically turns off.
If you do not touch your watch within three seconds, they automatically go out.

Clock "Data"

Modes:

1. Clock (hour, minutes and seconds)
2. Stopwatch
3. Alarm clock
4. Date

The MODE button switches between edited parameters. The numbers are changed using the ST/SP and RESET buttons. Go back to the current mode - MODE button.

Setting the time and date:

In time display mode, press the "MODE" button 3 times, then use the "RESET" and "ST/SP" buttons to set the hours and minutes. By pressing the "RESET" button again, you enter the setup mode current date and day of the week. You can view the date in the current mode by pressing the "ST/SP" button.

Nata Karlin August 15, 2018, 12:49

It often happens that the clock mechanism malfunctions and the watch begins to lag behind the exact time or, on the contrary, to rush. That's when knowledge of how to set up will come in handy wrist watch to eliminate chaos from your daily routine. Great if the mechanism has already been adjusted, and you again know exactly what time it is.

Man with a watch on his hand

How to set up an electronic LED clock?

In the era of minimalism and affordable things, many people buy electronic wristwatches from China in regular stores or on Aliexpress. Despite the simplicity of the system, the operating instructions written in Chinese are unlikely to help in setting up and regulating the functions of the device. The most famous of these devices is the LED clock more similar to bracelet. However, these devices are equipped with one button, with which you can set the date and time. In fact, setting up this device with 1 button is quite simple:

Press the button for a couple of seconds until the numbers start flashing.
Using precise pressure on the button, first set the current hour.
Press the button again and wait until the minute indicators start flashing.
By point-pressing the button, set required number of minutes.
Repeat the same procedure to set the current date.

Rules for setting LED clocks

LED clocks can be misleading for many, because the panel shows LEDs of different colors, located at each moment in the in the right place dial. Usually White color stands for hours, and blue stands for minutes. The entire plane of such a device is one big button.

LED watch in the form of a bracelet

Set time for led clock You can also easily and quickly:

Tap the screen with your finger 10 times.
Set the current hour by dragging white LED to the desired position.
Hold your finger on the screen for a second and also drag the blue arrow to the desired location.
If necessary The watch can independently cancel the settings mode, if you leave them in standby mode. However, it is better to touch the screen with your finger for 5 seconds and remove the device from the settings.

How to set up an electronic clock

Setting up an electronic watch with 4 buttons may vary, depending on the class, model and manufacturer of the device. Behind detailed instructions It's best to contact the manufacturer. However, it is rare for such documents to be stored for a long time.

To facilitate the process of setting up electronic watches, many manufacturers try to make special inscriptions to indicate the functions of each button

As a rule, they are written in English:

« MOD» — button for switching main setting modes;
« LIGT» — screen backlight function;
« SET»—change the setting value;
« START» — start and cancel the timer/stopwatch;
« RESET"—reset all set parameters to the initial value;
« SELECT» — options for selecting switching or changing parameters;
« DATE» — setting the date;
« LAP» — when the stopwatch is on, this button can be used to indicate the lap completed;
« ADJUST» - denotes the function of enabling settings, with which you can adjust one or another mode;
« REVERS» — allows you to return the settings to the previous value;
« FORWARD» is the opposite button to the previous one, moving the setting one stage forward.

Electronic watch on hand

To set the time on a four-button electronic watch, follow the simplest instructions:

Click the button that says " MODE"and hold until the numbers on the dial flash.
Click the button SET» and one of the two remaining buttons to increase or decrease the digital hour.
Click the button again MODE"and do the same operation with minutes.

Setting up an electronic clock with 3 buttons is not much different from setting up a four-button device. To set the date and time, follow these simple guidelines:

Click the button MODE» and wait until the colon flashes on the screen.
Next, click the button “ DATE", the hour display should flash.
Button " SET» set the desired hour.
Then press the button again DATE", the minute indicator will flash.
By clicking on the " SET» adjust minutes.

Women's watch, SL (price on the link)

How to correctly set the speed of a mechanical wristwatch?

Modern manufacturers of luxury watches are increasingly focusing their attention on mechanical devices. The fact is that they have a lot of advantages compared to electronic options. First of all, these include high aesthetic characteristics.

Mechanical watches are equipped nearby additional functions– shockproof, waterproof, etc.

In addition, the owner no need to monitor the battery level, it is enough to regularly wind up a reliable mechanism to always know the exact time.

Before you begin the setup process itself, you need to determine whether the mechanism is ahead of or behind the exact time indicators. An error ranging from 40 to 60 seconds is considered quite acceptable. and does not require fine tuning mechanical devices.

Setting principle mechanical watch just as simple as it was many years ago. The entire process is carried out using a single wheel located on the side of the device body.

Women's watch with crystals on a ceramic bracelet, SL(price on the link)

Carefully grasp the wheel and pull it away from the body until it clicks. Try not to apply force so as not to damage the mechanism.
Rotate the wheel forward and backward, setting the correct time.
By lightly pressing the wheel, drive him back without moving the clock hands.

Wind the watch by turning the wheel forward until it stops. Don't overdo it: Generally, 6 to 8 turns are needed to fully wind it.

If they are in a hurry or lagging behind quartz watch, just look at the battery size and buy new element nutrition. Then remove the wheel on the side of the case until it clicks, place the arrows on right time and lock the mechanism.

Women's watch with calendar on a metal bracelet, SL(price on the link)

Tips and tricks for using and adjusting mechanical watches

The best way to set the time on the dial is rotate the wheel arrows in the forward direction. Some models display the date and other options on the dial. For such devices, there are setup instructions from the manufacturer. For example, the date on men's watches The mechanical type is moved by the same wheel, only the device has two of them, and if there are additional functions, three.

If you feel that you have wound up the clock mechanism completely, try to return the wheel back a couple of turns, and then forward again

This the process ensures proper distribution of lubricant on mechanisms and reduces wear of parts.

When setting the date, time and other options, do not make quick movements with the wheel, because these devices are very sensitive to adjustment and can easily break down if manipulated abruptly. The watch is wound up only if necessary. The frequency of replanting should be indicated in the operating instructions for the device.

Men's skeleton watch with leather strap, OKAMI(price on the link)

If you feel that the hands are moving with difficulty, the watch has become slow or too fast, and you have to adjust it regularly, this is a reason to contact a watchmaker. A professional will not only help you with repairing your favorite device, but will also tell you how to properly care for it, so that it stays in good condition. for a long time did not fail.

VST productions are gaining more and more popularity in the electronics market. They are made in China. The VST clock is made in modern design and have several options. Desktop models, thanks to the folding leg on the body, can be placed anywhere: on a table, shelf, bedside table, etc. Wall-mounted ones are also available Digital Watch VSTs that hang on the wall.

Short description

VST watches, made in a strict and laconic design, look very cozy and at the same time quite modern. All models have a 24-hour time format and an alarm clock. In addition, some wall-table options have a voice message time. All VST clocks have power backup. In case of an emergency, the time is saved in the clock memory. When you turn on the light, you do not need to set the clock and alarm again. Each model also has different color schemes.

In general, the VST watch is quite simple to use and is well within its price range. They will look great not only on the bedside table in the bedroom, but in the office on the desktop. Executed in beautiful design, with streamlined corners, the clock will easily fit into the interior of absolutely any residential or office space.

The body is made from high degree strength of plastic. The kit includes instructions in Russian.

Alarm

One of the main features of the VST clock is the built-in alarm clock. By choosing the one you like best from the assortment of signals, you can make your morning rise as pleasant and comfortable as possible. For those who like to take a nap, there is a separate call delay button. A repeated signal will certainly not allow you to oversleep on your way to work.

The VST clock operates on In case of a power outage, autonomous power supply, powered by two batteries. It should be remembered that if the watch breaks down, in order to avoid electric shock, you should not open the case and try to repair the device yourself.

VST clock: instructions

All models are equipped with the following buttons:

Volume.
Tuning management.
AM/FM band switch.
Alarm settings.
Time settings.
Minute settings.

In order to set the time, you need to press and hold the [Time] button. To set the hour, press the [Clock] button, minutes - the [Minutes] button and hold until the desired time is set. Then release the [Time] button.

The alarm time is set as follows:

1. Click the [Function Selection] button.

2. Set the alarm time:

Press and hold the [Alarm] button.
Press the [Clock] button to set the hour.
Press the [Minutes] button to set the minutes.
Release the [Alarm] button.
To check the alarm time, you need to restore the settings as indicated above.

In order to set an alarm (standard signal), you must:

Set the alarm time as shown above.
Switch [Function Selection] to .
Turn [Volume] until you hear a click.
Press the [Sleep] button to turn off the alarm.

Call repeat function

When the alarm rings, you need to press the [Snooze] button. After 9 min. the signal will sound again.

It is rare that electronics and equipment are sent to Russia from China with a memo or passport in Russian. If you find yourself in this situation, then most likely you ordered wall or a table clock on Aliexpress or became the owner chinese watches from the shop.

In the Aliexpress online hypermarket, there are more than half a million options for the “electronic watches” item – of all sizes, colors and shapes. There are wall and table clocks with buttons, and even floor-standing solutions with thermometers. There are plenty to choose from! But how to set it up?

Most often, the buyer has to independently guess the purpose of the buttons and, using ingenuity and intuition, configure the device.

Fortunately, the experience of numerous users of Chinese products allows us to determine a certain algorithm for trouble-free setting of any electronic clock - wall, table and even floor!

What are the buttons on a wall or table clock responsible for?

For settings Chinese electronics you will need to figure out what the buttons on the watch mean.

Everything is very simple.

Workers and important buttons in electronic watches from Aliexpress usually no more than 4. All other buttons are either fake or are responsible for demonstrating a specific function.

To configure, you will need to know the markings:

MODE/MOD – selection. Responsible for switching between categories and parameters. Typically these are the functions “time”, “alarm clock”, “stopwatch”, “date”.
START/SET – input. The area of responsibility includes setting the digital indicator of the selected parameter, that is, directly programming the date or time.
In addition to MODE and SET, there is certainly a RESET key on the device body - to reset the entered data or reboot the product.

Location of the RESET button in products from Aliexpress: in table and wall clocks - usually hidden in the battery compartment or recessed into back panel products.

All other elements of Chinese watch electronics serve to enable or demonstrate individual functions, but are almost never responsible for setting them up:

LIGHT – turn on the backlight;
12/24 – switching between 12-hour time format and 24-hour time format;
MIN/MAX – in products with demonstration of temperature and humidity, it is used to display the minimum and maximum data values for a certain period of time;
C/F – switching temperature indicators in Celsius or Fahrenheit;
ON SC OFF – switching on voice mode to quickly activate the screen backlight when it goes into a “sleeping” state;
SNZ – delayed alarm start;
ALARM – setting the alarm time;
UP – blocking the “sleep” mode when the device is operating;

Buttons on the back or top panel without designation – turns off the alarm when it goes off.

Sometimes manufacturers ignore any labeling options. Then one can navigate “by touch.” Two controls are exactly MOD and SET - “select” and “enter”, one is “select” and “set” at the same time.

In the case of single control, don’t be scared, because everything is simple:

Hold, press the key – “select”.
Short presses – “setting parameters”.

VIDEO INSTRUCTION

Setting the date, time and alarm of the electronic wall clock

The standard version of the push-button configuration is SET, MODE, RESET.

And it is this that causes the greatest difficulties for users.

In fact, setting up a 3-button digital watch is quite simple.

In them:
MODE – choice.
SET/START – input of digital data.

RESET – reboot and “help” when setting basic parameters.

The sequence of actions is as follows: At help MODE parameter is selected. Each function is assigned a certain amount of

clicks.

For example: one press – time, two presses – date, three presses – alarm clock. In the absence of instructions, the sequence is determined experimentally; fortunately, there is only one electronic format

time and dates and understand which function appeared on the screen is quite simple. Setting, that is, switching between numerical indicators by flipping, is carried out either using SET, or using SET and RESET. In the second case, SET is responsible for hours and months RESET – in minutes and days
. Although there may be other options, since Chinese products are sometimes unpredictable.

The time on the alarm clock is set in the same way: MODE – selection, other buttons – settings. The moment of turning off the alarm clock is interesting - this often requires simultaneous pressing

two auxiliary buttons at once. The peculiarity of Chinese watches is unpredictability. Buttons on devices have different names and are responsible for different functions

or are completely fake. But all this is not scary!