There is a large load on the disk, what should I do? Secrets of Yandex Disk: how to install, log in and use

I have long wanted to write an article about what to do if disk is 100% loaded. I couldn’t solve this problem for a long time, but then I was able to do everything this way. I will now describe how I did this in this article.

So, this phenomenon occurred on my laptop, on which I constantly work. By the way, many other users also suffer from this problem, therefore, it needs to be solved, which is what we will do now.

What happened in the beginning?

Let's say you purchased a good, powerful laptop with the Windows 8 operating system. For some, it seems powerful, unlike Windows 7, for others, it’s the opposite. In any case, they say it works quickly.

At first, this is indeed the case. You will work as usual, use programs, play games, and do other things. Everything will work quickly.

After several months of use, working on a laptop turns into hard labor. It takes a very long time to turn on, and you can’t wait for programs to start either.

Such signs may indicate that the disk is 100% loaded. To verify this, open the task manager and go to the tab "Performance" and see if the disk is loaded. If yes, then we will try to do something.

You can order subscribers for your Telegram channel on the DoctorSmm website. Here you will find not only some of the lowest prices on the RuNet, but also advantageous offers that are suitable specifically for your online community. Hurry up while there are nice wholesale discounts on the site, and you can also choose the speed mode for resource receipt.

If the problem is not with the disk

If you're not sure if your computer's slow performance problem is related to the disk, try the following:

Check if the system disk is full. The main thing is that the stripe is not red.
To clean up garbage, we will use the CCleaner program.
We clean programs from startup.
Using an antivirus.
Try to remove suspicious programs that may overload the system.

We solve the loading problem 100%

When we went into the task manager, we may have seen that the disk is 100% loaded, but actually, where and what is it writing?

One of the problems is the innovation introduced into Windows by Microsoft. It is needed in order to.

This technology is called and is designed to quickly log into the system after sleep. This is done by writing information from RAM to .

Now it’s clear why our system is so slow and the disk is heavily loaded. But, as it turned out, this service can be disabled.

To do this we go to Control Panel and look for " Administration».

Now open the item “ Services" Scrolling and looking for a service Superfetch.

Right-click on it and click “ Stop».

For greater efficiency, right-click on this service again and go to “ Properties" Select the launch type " Disabled"so that the next time you start the system, the service will not turn on again.

Personally, when I went to the task manager, the disk load dropped sharply and was 0-20%. You can try turning on the Superfetch service again and make sure that the disk will boot to full capacity again.

Addition

I found out that some users contacted Microsoft support with this problem, but they just threw up their hands and said that nothing like this could happen. The system seems to be in perfect order. They also say that the problem is in the hard drive itself.

Thus, we still found the reason for the disk loading 100%, I think that this is not the only reason, but there are others that will be discussed and you can find out about them on our website.

The Windows 10 operating system has received a huge number of updates over the past few years, which, of course, is great on Microsoft's part, but here's the problem - the disk is 100% loaded. To put it more precisely, when the system installs updates for itself, it often loads your disk at 100 percent. Once the installation is complete, the disk usage should drop to zero, but sometimes this does not happen and the user's disk can get stuck in this endless cycle of congestion.

Some users, in fact, sometimes are not even aware that their disk is working at full capacity, but are simply experiencing a slow system performance. It's incredibly easy to check disk usage using Task Manager. Don't know where to look? Let's explain.

You can check your disk load in the Task Manager in the tab with running processes. You've probably already used this system program, but you just didn't pay attention to the disk load column (meaning those new to Windows).

Click ALT+CTRL+Delete on your keyboard.
Select "Task Manager" from the list of actions.
Select the Processes tab.
In this tab you can see a column named “Disk”. This is where the total load on your disk will be indicated.

Method #1 Disabling Windows Search

Disabling Windows Search has proven to be the most helpful action for most users in dealing with this problem. In more detail, Windows Search scans your files and folders, and then enters the information recorded from them into an index file. It is for this reason that this service is also known as SearchIndexer.

The benefit of Windows Search is that it speeds up the process of finding your files. But, disabling Windows Search will not have any noticeable effect. The only downside will be a slight increase in the time it takes to search for files and folders. Although, if you do not perform frequent searches on your computer through tons of different files and folders, then you have nothing to worry about.

Follow these steps to disable the Windows Search service:

Click Win once.
Right-click on the result that appears and select “Run as Administrator”.
Once the Command Prompt opens, type exe stop “Windows search”(with brackets) and press Enter.
Wait while the system stops the Windows Search service. You should see a message indicating that the service terminated successfully.

Keep in mind that disabling Windows Search is not permanent, but only temporary. Open Task Manager and look at the disk load. If it has decreased, then you can start the newly disabled service using these steps:

Click Win+R.
Register services.msc and press Enter.
You will see a huge list with services that operate on your operating system. Find in the list Windows Search.
Double click on Windows Search.
Click the Startup Type drop-down menu and select Disabled.
Also click on the "Stop" button if the service has not yet been stopped.
And finally,

In fact, disabling this service is not a recommended action. But, if you want to try to cope with the problem of disk utilization at 100%, then everything is in your hands. One way or another, if all else fails, then use the steps described above and enable the service.

Method No. 2 Disabling Message Signaled Interrupt mode (firmware bug)

Disabling Message Signaled Interrupt can also help deal with this problem, according to claims from users online. StorAHCI.sys is a driver with which a firmware bug can occur, causing high disk load.

Click Win+R.
Enter devmgmt.msc and press Enter.
Double-click on “IDE ATA/ATAPI Controllers.”
Double click on “Standard SATA AHCI Controller”.
Go to the "Driver" tab.
Click on "Details".
If the driver name matches StorAHCI.sys, then the so-called “driver out of the box” works for you and you need to make a couple of changes in the Registry Key.
Go to the "Details" tab of the "Standard SATA AHCI Controller" properties window.
Click the Property drop-down menu and select Device Instance Path. Write down the knowledge shown somewhere or simply leave the window open.
Click Win+R.
Enter regedit.exe and press Enter.
As soon as the Windows Registry Editor window opens in front of you, go to the path HKEY_LOCAL_MACHINE→System→CurrentControlSet→Enum→PCI→“Path to device instance”→Device Parameters→Interrupt Management→MessageSignaledInterruptProperties.
Click LMB twice on the key MSISUpported on the right side of the window.
Change the value of this key from 1 to 0.
Click "OK".

Restart your computer and your problem should now be resolved. If you see several controllers in the Task Manager, then repeat all the steps above for each of them.

Method #3 “Use tooltips to speed up page loading” feature in Google Chrome

Sometimes, the problem with 100% disk utilization can occur due to the Google Chrome browser and its “Use hints to speed up page loading” feature. Users complained that this function was quite resource-hungry. So disabling this feature in Google Chrome can help take the stress off your drive.

Follow these steps to disable the "Use tooltips to load pages faster" feature in Google Chrome:

Open Google Chrome.
Click on the “ ” icon in the upper right corner of the browser window.
Select Settings.
Go to the very bottom of the settings and click on the “Advanced” button.
Find the option “Use tooltips to speed up page loading” in the advanced settings and uncheck it. The function will be located in the “Privacy and Security” column.

Now close Google Chrome and check your disk usage percentage in Task Manager. It is possible that this particular function was at the forefront of the problem that arose.

Method #4 Disabling Skype

A huge number of users were able to fix the high load on their disk by simply turning off Skype. There are some programs, such as Google Chrome or Skype, that can at times use up all your disk resources (especially Chrome). So disabling some features or the entire program may help solve the problem. If not, you can enable them again.

Click Win+R.
Write in line C:\Program Files (x86)\Skype\Phone\ and press Enter.
Right-click on the Skype executive file and go to “Properties”.
Go to the “Security” tab, and then click on the “Change...” button.
Select "ALL APPLICATION PACKAGES" in the "Groups or Users" section.
Check the box next to the “Record” option in the “Permissions for the “ALL APPLICATION PACKAGES” group” section.
Click on “Apply” and “OK”.

Go to the Task Manager again to check the problem with the disk being 100% loaded. You can also try turning off Skype altogether and see if the voltage drains from the drive.

Method #5 Uninstalling Flash updates

The next possible reason for the huge disk load could be Flash updates. This can be resolved by simply deleting these Flash updates from the Windows Update History.

The thing is that the downloaded and installed update could contain a bug, which causes excessive disk usage. Also keep in mind that Internet Explorer, Microsoft Edge and Google Chrome also come with a Flash plugin. So, even if you didn't install Flash yourself, it may already be installed through Windows Update.

Use the following steps to remove Adobe Flash updates:

Press Win on your keyboard.
Select Settings from the Start menu.
Select Update & Security.
Select Update History.
Click on "Uninstall updates".
Find Adobe Flash Player and click Uninstall.
Follow additional on-screen instructions.

Restart your computer once the updates are removed. Check if the 100% disk usage problem has been fixed.

Note: Do not try to completely remove Flash using uninstallers available on the manufacturer's official website. Complete removal of Flash may well cause serious problems in the system.

Method #6 Unlinking OneDrive

It looks like the problem may also be coming from OneDrive, based on claims from users online. A huge number of Windows users complain that when working with OneDrive, high disk usage can occur. Unlinking from OneDrive may solve this problem.

To disconnect from OneDrive, follow the steps below:

Right-click on the OneDrive tray (bottom right corner).
Select Options".
Go to the "Account" tab.
Click on the "Unlink OneDrive" link.
Click on the “Unlink account” button.

Now restart your computer and check for the problem.

You can also completely remove Microsoft OneDrive using the Programs and Features functionality located in the Control Panel.

Method #7 Disable Windows notifications

Disabling Windows notifications was able to solve the problem with 100% disk usage for many users on the network (as, indeed, all the methods in this article). To disable Windows notifications, use these instructions:

Click the button Win on keyboard.
Select Settings.
Click on "System".
Go to the "Notifications and Actions" tab.
Turn off all notifications under the Notifications section.

Wait a few seconds and then head to Task Manager to check your disk usage again. Well, is the disk still in a 100% loaded state? Ok, let's move on.

Method No. 8 Reviews and diagnostics

Setting up Feedback and Diagnostics options is a pretty good way to reduce the load on your disk. Typically, your Reviews and Diagnostics are set to either Basic Details or Full Details. Changing the setting to Basic Settings may reduce disk usage. To do this, do the following:

Click Win+I.
Click "Privacy".
Go to the “Reviews and Diagnostics” tab. Click the "Send device information to Microsoft" drop-down menu and select the "Basic information" option.

Check the load on your disk. The actions taken should have reduced the load at least a little.

Method No9 Cancel Windows Performance Recorder(WPR)

Windows Performance Recorder, as its name suggests, is a tool that is used to record and report your performance directly to Microsoft. It is located in the %SystemRoot%\System32 directory and is pre-installed software. Unregistering Windows performance can help you knock 100% of the disk load off. To do this, do the following:

Click Win.
Type “Command Prompt” into the search bar.
Right-click on the search result and select “Run as Administrator.”
Enter WPR –cancel and press Enter.

Well, this should have helped. However, be aware that this step will have to be repeated every time the system is rebooted.

Method #10 Disabling the Connected User Experiences and Telemetry service

Disabling a service Connected User Experiences and Telemetry can also help you solve this problem.

Click ALT+CTRL+Delete and select Task Manager.
Go to the "Services" tab.
Find the "DiagTrack" service.
Right-click on it and select “Stop”.
Then right-click on it again and select “Open Services”.
Find “Diagnostic Policy Service” in the service lists and double-click on it.
Click the Startup Type drop-down menu and select Disabled.
Go to the "Recovery" tab.
Click the First Failure drop-down menu and select “Take no action.”
Repeat the same for the Second and Subsequent failures.
Click on “Apply” and “OK”.

This action is permanent, so you don't have to repeat it every time you restart your computer.

Found a typo? Select the text and press Ctrl + Enter

We present you with instructions for uploading files and folders to the most popular cloud file storage service, Yandex.Disk.

1. Download files via a web browser without additional applications:

Note! You can use the Upload File button to select individual files on your computer.

In the window that opens, you can click the “Load more” button if you need to select several files on your computer, or “Hide” if this is not necessary.

2. Upload files to Yandex.Disk via the computer application

install the Yandex.Disk program on your computer, then enter the login and password for your account in the program window.

To upload files to Disk, you just need to copy them to the Yandex.Disk folder, after which they will automatically appear on Yandex servers and you can either access them through a browser or share a link to the file with friends. The files will become available from any device on which the Yandex.Disk application is installed, regardless of the operating system. The storage period for files is unlimited.

Launch the application and go to the folder where you want to upload the files.

Use the + button to select an action from the list (take a photo, add a picture from the gallery, create a folder, or select files from the device).

4. Upload files to Disk from an iOS smartphone

Install the Yandex.Disk application from the AppStore.
Launch the application and select the folder into which you will download the files, then press the + button in the upper right corner of the smartphone screen.
Select an action from the available ones - select a photo from the gallery, take a photo now, or create a new folder
Next, for example, when downloading files from the gallery, select the required files or the entire album, if necessary.
As a result of clicking the "Finish" button, the files will be uploaded to Yandex.Disk.

Switching to a new OS brings pleasant opportunities, but one of the widespread problems is that in Windows 10 the hard drive can be 100% loaded. Users are sounding the alarm and don’t know what to do. Let's look at the causes and methods to eliminate them.

Looking for reasons

The OS is clean and free of viruses, but for some reason in the task manager the hard drive is loaded at 100%. Let's sort the processes in descending order in the "Disk" column; if this is not a newly installed program, then let's go look for answers in the Windows processes themselves.

As a result of executing the command, the service will be temporarily suspended and, accordingly, the process will go into a loop - this may be a solution when the disk is loaded to 100 percent in Windows 10. But to prevent repetition, you can disable indexing in the services - if this is not critical for you, this will obviously slow down the search for files and folders. You can disable it by going to “Control Panel” → “Administration” → “Services” → find “Windows Search” → first click “Stop” → in the startup type select “Disabled” → OK. text_7/screenshot_4 and 5

If the situation has not changed, move on. Perhaps the virus is affecting processes and this may be the answer to the question “Why is the disk loaded at 100% in Windows 10?” Conduct an in-depth analysis of yours and additionally use the Dr.WebCureIT utility - it downloads quickly, does not require installation and is free.
The next reason may be the antivirus itself. Observe, a deep scheduled disk scan is probably underway, but if this happens constantly, select other software to protect your PC.
A fairly common reason is a broken disk, as the operating system tools try to check and slow down all other processes. Have you ever had a black screen before loading the OS? If yes, then this check disk (abbreviated chkdsk) built into Windows 10 checks the file system of your hard drive for errors, as a result of which it is constantly loaded at 100 percent. Of course, you can disable it, but maybe it’s worth looking into the root cause and only then removing it from the task scheduler.

How else can I remove disk loading to 100% in Windows 10?

You need drivers! Many people began to install the OS on their own, but as for the drivers, users consider it sufficient to install for sound, video, webcam, etc., but they do not install the really necessary drivers, apparently they do not like the file names or they do not understand them. This happens with drivers for the motherboard chipset and with ACHI and Storage Tool. The answer is simple, install them - go to the manufacturer’s website and download for free.
Defragmentation will help if the disk is 99 percent loaded in Windows 10! How long have you not optimized your drives? If you can’t even remember, go ahead! Endless copying, deleting, downloading leads to complete chaos for clusters, and when accessing a file, the hard one rushes about in search.
Do you use cloud storage services? If yes, then the “Synchronization” checkbox is probably ticked. Notice how much information is leaked at this moment. If at this moment the disk is 100 percent loaded, then the answer to the question of what to do is obvious! Turn off automatic loading and use manual mode - set it at night or when you are not at home.
Another tip on how to reduce heavy disk load in Windows 10. Torrents are our everything! Yes? You not only download, you also distribute, use the program when you are not at the computer and leave not 10 downloads running, but 2-3, depending on the configuration of your PC.

What to do if the hard drive is 100 percent loaded?

Perhaps updates give such a load. Again, if the screw is not in the best condition, the processor is weak - you can spend hours on this. Let's see how many hidden and unnecessary updates there are and how to disable them. “Settings” → “Update and Security” → “Windows Control Center” → “Advanced settings” → uncheck “When you update Windows, provide updates for other Microsoft products.”

Next, go to the “App Store” → select your account and “Settings” → in application updates, switch to “Off.”

Have you noticed that when you start Windows 10, your disk is 100 percent busy with something? The reason may be unwanted files in startup - go there: ++ → “More details” (may not be, depending on the settings) → “StartUp” carefully study the contents. TO ak? To remove unwanted applications without harming the OS, use software designed for this, for example: “CCleaner”, “AutoRuns”, “Ashampoo WinOptimizer Free”, etc.

On your Windows 10 laptop, the disk is loading at 100% and you don't know why? The reason may be the Superfetch service and the Svchost system process, the task of which is to optimize their operation. The principle is as follows: the most frequently used programs and applications are analyzed and begin loading into system memory in advance in order to. Quite a few resources are required, which is why the load occurs. You can disable it in “Services” → “Superfetch” → in properties select “Stop” → and in startup type “Disable” → OK.

If the disk is 100% loaded in the system process, then perhaps there are not enough rights and they need to be added, the relationship with the rights “ntoskrnl” - the OS kernel, has been proven by its action. So, “Task Manager” → “Processes” → right-click on “System” → “Open file location” → right-click “ntoskrnl.exe” → “Properties” → “Security” tab → “Advanced” → “All application packages” and you need to tick all the boxes.

We have looked at various reasons why your PC is running at 100%. You can read how to find out « » . Perhaps one tool will help, or maybe you need to carry out a set of optimization works. In any case, do not forget that the system must be maintained in proper condition. Modern software provides choice, given that most are freely available and have a free license.