Iphone doesn't see the charging cable. How to charge an iPad with a non-original cable

When you charge your iPhone or iPad using the Lightning connector, a notification may appear on the screen that says " This cable or the accessory is not certified and is not guaranteed to work reliably with this iPhone" Usually after this charging stops. What's the matter?

Below we will talk about three of the most probable reasons, by which you can see such a message - and we will explain what needs to be done in such a situation.

Before we begin, we suggest you do simple procedure: First remove and then insert the cable back into the iPhone and iPad connector. It also wouldn't hurt to try connecting to a different USB port or outlet. If in your case there is a random system error(this also happens), this will help. If not, read on.

Reason #1. Use of non-original accessories

Most often, the above message appears when a non-original accessory is used - a cheap replacement official equipment Apple. Users try to save money on branded products - they cost big money and before the crisis - and buy much cheaper accessories from nameless manufacturers. Sometimes these things work, sometimes they don't.

What to do? You can try to bypass the protection. To do this:

• Connect the cable to your iPhone or iPad;
• Click Close when the message “This cable or accessory is not certified and is not guaranteed to work with this iPhone” appears.
• Unlock your iPhone or iPad;
• Click Close again when iOS displays the warning window;
• Now - without blocking! — unplug the cable from the phone or tablet connector;
• Reconnect the cable.

An alternative (and much safer for your device) option is to buy a cable that is guaranteed to work and won't harm your iPhone or iPad! There are always cheaper third-party accessories that work just fine—for example, the AmazonBasics Apple Certified Lightning Cable costs just $9.99. In general, find out quality accessories you can use the logo with the inscription Made for iPhone / iPod / iPad(“Made for iPhone/iPod/iPad”) on the packaging.

Reason #2. Cable damage

The message “This cable or accessory is not certified and is not guaranteed to work reliably with this iPhone” may also appear because the accessory is simply broken. Possible reasons: The cable has been exposed to water, has become a victim of corrosion or physical impact. In this case, it will have to be replaced with a new one - for example, with a legal and quite affordable alternative from Amazon or other manufacturers.

Reason #3. Garbage

A much less common, but still real reason is a physical obstacle to charging. The port can become clogged with crumbs, threads/lint, or any other contents from your pockets. This happens more often with the iPhone, but there are similar complaints from iPad users online. What to do? The solution is obvious - check the ports for stuck debris and clean them of foreign objects (for example, with a toothpick). If you don’t have confidence in your abilities, turn to specialists.

Comrades from the United States of America are increasingly fighting for copyrights. In the bourgeoisie, licensing is held in high esteem, as well as only original gadgets and devices. Therefore, the appearance of errors and warnings about certification of cables and accessories is not news for the owner of an iPhone, iPad or iPod.

World Famous Apple company went further than others in this. Starting with the new, seventh generation of operating iOS systems, the ability to connect a smartphone or tablet using cheap Chinese USB cables has disappeared. When connecting a non-original cord, a message appears that This cable or accessory is not certified and may not work correctly with this device.. At the same time, if in beta versions of the system the gadget simply warned about the problem, now it blocks the unwanted cable.

There are three workarounds for the error if the message “This cable or accessory is not certified” appears.

1) The simplest, but also unreliable. This method doesn't always work. But you don’t need to make any special efforts to try it.

• You should connect your phone to the network using a USB cable.
• Click “close” when an error message appears.
• Unlock the gadget and press the same button in the warning window.
• Disconnect the cable from the network and then connect it back.
• Click the “close” button again in the message about an uncertified cable.

The gadget will start charging. This method is explained by a bug in the device’s firmware and does not always work, but over time, Apple developers will be able to eliminate this trick.

2) Buy a special Chinese cable. The Celestial Empire is rich in so many talents. And now, craftsmen from China have managed to develop a cable that is not afraid of blocking from an iPhone or iPad. The creators claim that usb type completely unimportant for their models; cords work equally well with all types of gadgets. How long Chinese new generation cables will be able to stay on the market is unknown. After all, Apple is also not standing still and will want to improve program code to protect against fraudsters.

3) The most difficult, but at the moment most effective method. The Cydia store has released a special free tweak that will help you bypass the protection.

• First, you need to jailbreak using the Evasi0n 7 utility. Instructions for working with it can be found on the Internet.
• Next you should run with home screen Cydia and wait for the storage update. In the Manage tab, click on the Source button.
• Add the following Internet address - http://parrotgeek.net/repo. The program will automatically download all the necessary data from the storage.
• Find a tweak called Unauthorized Lightning Cable Enabler.
• Update your device for the changes to take effect.

After these simple manipulations, the gadget will begin to charge even with the help of non-certified cables and accessories. This method is good because during beta testing of the seventh generation of iOS, it was in the shadows. And only after the official release operating system, the tweak appeared in public access. Consequently, Apple was unable to block the program's actions even before the system was released. It is possible that they will now add such a function to new version firmware. But folk craftsmen will come up with something new. As always happens in the struggle between pirates and copyright holders.

Everyone is accustomed to the fact that any product with company logo apples are expensive, but if in the case of Apple technology While this is easy to accept, the price of branded accessories sometimes exceeds reasonable limits. We looked at how to extend the life of complete cables, but not all users are ready to resort to such tricks when you can buy cheap Chinese cables for ridiculous money.

But when saving on original charging cables, you need to be aware of possible consequences. The use of non-original chargers can not only be harmful to the environment, because they do not meet environmental standards, but also dangerous both for the equipment itself and for the lives of users. There are known cases when non-original chargers caused iPhone batteries to ignite, causing fires and burns to users. Apple even organized an exchange program for this occasion. Chinese users when in the near future Apple Store you could return a non-original charging cable and get a discount for purchasing branded accessories from Apple.

Another widely known problem when using Chinese cables and chargers is the incorrect behavior of the display sensor when charging, which manifests itself in the form of false clicks. Incorrect voltage or current results in lower potential static currents that are detected by the device as touch. This behavior will not affect the performance of the display in any way and has no negative consequences, but does not allow you to comfortably use the device while charging.

With the advent of fingerprint scanners in Apple devices finger Touch ID it turned out that static currents also affect its operation. Some users noted that it stopped working when using non-original chargers. Touch ID is a complex sensor that is extremely sensitive to any influence. The worst thing is that if something happens to it, you won’t be able to get away with simply replacing the button like before, but you’ll have to change the whole motherboard device, which will cost almost the full cost of the device itself. Each Touch ID sensor is unique and tied to the processor specific device forever. That is why you cannot even change the cable to Touch ID to a non-original one. This can happen during renovations. broken display in unqualified service centers. Any impact on Touch ID will cause it to simply fail. This is a necessary security measure that guarantees the safety of data on the device and safe Apple work Pay.

This is why you should not use non-original chargers and cables. There is little chance that this will cause the device to catch fire and you will be in the news, but it is likely to affect Touch work There is an ID. When buying an expensive iPhone or iPad, it is foolish to skimp on original cables - if something goes wrong, repairs will cost you significantly more.

Added: As user maka correctly pointed out in the comments, not all non-original chargers are the same. Apple has MFI (Made for iPhone, iPad or iPod) certification, which it issues, or rather sells to third party manufacturers. This certificate also applies to charging cables and power supplies. If a product bears the MFI mark, Apple guarantees that it meets all safety standards and regulations for use with its devices.

What to do if the wire does not charge your iPhone

Hello! There is one more problem on the current agenda. What to do (or not do) when your iPhone won't charge? In this article we will look at the probable prerequisites for this and try to find a solution for each of them. BYPASSING PASSWORD IN iOS 10 or what to do if you forgot. So, if your iPhone has finished charging, sit back and read until the very end... I'm sure one of the tips below will help you.

As you have already figured out, there are more than several circumstances why an iPhone may not charge. Below I have collected the most common of them. Let's start with the most “harmless” ones, and then move on to the “cardinal” ones... Follow the stated order, and every time try to implement what you read. I'm sure some of the tips will definitely help you charge your iPhone.

• Is it safe to charge your iPhone using an iPad charger? - read in this article
• Is your iPhone draining abnormally fast? There is a solution! - read in this article

Reason #0: Software (firmware) glitch

Believe it or not, almost always the reason for an iPhone not charging lies in the software (firmware), and not in the hardware. If the iPhone doesn't work anymore Question: The iPhone turned off and won't turn on, what should I do? If you didn’t know, there is a controller inside the iPhone (a chip on a board) that is responsible for charging the battery. What to do if frozen Xiaomi Redmi 4 Pro and does not respond. This controller works under the guidance software. Thus, when you connect the cord to the iPhone, power is supplied not directly to the battery, but first to the board with the controller, which in turn obeys the program built into the phone.

What can we do? And the fact is that the software component of the iPhone recognizes when a power source is connected to the phone and gives a command to the controller to start charging. If the software is frozen, no command will be issued and your iPhone will not charge.

To solve this problem, a hard reboot of the device usually helps. To do this, simultaneously press Home buttons and Power for at least 30 seconds.

• If you need to reboot your iPhone X or 8, read this article
• More detailed information By reboot iPhone- can be found here

Reason #1: Lightning port is dirty

80% of the population carries their phones in their pants or trouser pockets... I don’t know about you, but I regularly clean out all kinds of garbage from my jeans pockets... where does it come from? Moreover, this garbage (dust, lint, hair, etc.) tries to sneak into any crevice of my iPhone.

Imagine! This is the first reason why the iPhone may not charge. You can’t even imagine how much lint and dust gets into the connector for Lightning charging! The accumulated compressed dust does not allow the Lightning plug to fit properly into the connector hole, which leads to the problem above. Don't believe me?

Try this! Take a wooden toothpick and gently clean out any accumulated debris from the Lightning connector. What to do if it doesn’t charge, you need to try charging the phone using another one. IN this material I will tell you what to do if the iPhone does not charge, but shows that it is charging, I will describe the reasons for this problem. Try to “pick out” charging holes from both corners. Proceed with extreme caution to avoid damaging the contacts. You will be shocked when you see how much “felt” we managed to get. After that, blow out the connector and connect the charger. What to do if your iPhone won't charge. If the phone is very low, it may take up to 15 minutes before it shows the first signs of life.

Reason #2: USB port is faulty

If you are trying to charge your iPhone from USB port Well, the first thing you should do is check if it works. On my working Windows laptop has a couple USB connectors, from which the iPhone does not charge at all. I don’t know what this is connected with, but the phone does not receive a charge. It seems that 5V power supply to these USB ports not served at all.

Some information for general development:
- Regular USB the port has an output voltage of 5V and a current of 0.5A
- Standard for comparison iPhone charging outputs 5V and 1A
- Well, iPad charger outputs 5V and 2A

Try this! If this is your case, try another USB port or connect your iPhone to a regular 220V charger. If your charger also doesn't charge your iPhone, read on for the next possible reason.

Reason #3: Charger/cable is faulty

The iPhone cable does not charge. Repair

The most common malfunction usb cable For iPhone charging . ok... what if original Apple The charger also does not charge the iPhone? Then it was time to check the Lightning cable. I disassemble and repair in a few minutes

iPhone won't charge? Charging problems? We will suggest a solution to the problem

In this video, we will tell you what could be the reason incorrect operation charging cable Apple iPhone,iPod,.

OK, I won't be original when I say that real chargers Apple devices are quite expensive. It’s another matter if you buy an iPhone charger on AliExpress (from China) - after all, it will cost you several times cheaper. BUT! BUT! BUT! I strongly do not recommend doing this! Under no circumstances should you buy or use cheap Chinese non-original chargers. According to reviews from friends and personal experience, I can assure you that Chinese chargers sooner or later they will play a cruel joke on your device if they do not drive it into a “wooden box”. You must realize for yourself that " cheaper doesn't mean better“, and when it’s almost for nothing, doubts about the quality creep in.

So, if your iPhone does not charge from a Chinese (non-original) charger, I would DID NOT further EXPERIMENT and would try GET A REAL ORIGINAL CHARGER FROM APPLE. Everything should be clear here.

Okay - okay... what if the original Apple charger doesn't charge the iPhone either? Then it was time to check the Lightning cable. My iPhone won't turn on, what should I do? What to do if the iPad or iPhone does not turn on and is on fire. Again, from personal experience, even the original cables that come with the iPhone fail over time. To be honest, the original cables are quite fragile to begin with. If you do not use them carefully enough, frequent bending will damage not only the outer plastic braid, but also the conductive “cores.” WHAT TO DO IF THE SENSOR DOES NOT WORK. I recently threw out my original cable because it began charging the iPhone to no more than 60%.

I have nothing against the lightning cables they sell on AliExpress. Here they either charge or not. Do you know how much it costs original lightning 1m long cable in the Apple Store? Fabulous 19. “modem mode” and what to do if it doesn’t exist. Go crazy! For this money you can purchase at least three excellent certified cables that will charge your iPhone without any problems. I tried a bunch of cables - from cheap ones at 0.99 to expensive ones at 10 from different manufacturers, and I can recommend you a really cool lightning cable from Ugreen (link to AliExpress).

• How do I get up to 90% cashback for purchases on AliExpress - Instructions

“This cable or accessory is not certified...”

Some of you have probably already encountered the message “ This cable or accessory is not certified and is not guaranteed to work reliably with this iPhone." There may be several reasons for this, and we will consider them in a separate article. I will only say one thing - starting with iOS 7, Apple has taught its devices to recognize the authenticity of USB cables. As I wrote earlier, a special chip is installed in the Lightning cable plug that allows the iPhone (iPad) to recognize the origin of this cable. The Chinese, of course, learned to counterfeit Lightning chips, but with the release of iOS 7, Apple changed the rules of the game again. Therefore, try to use original chargers...

Try this! Use known-good original chargers and Lightning cables. If they don’t help, most likely one of the iPhone components has failed. Read about it below.

Reason #4: iPhone Battery

Any battery is consumables... This means that batteries do not last forever and require periodic replacement. I recently replaced the battery of my MacBook Air, because The battery completely stopped holding a charge and it became impossible to use the computer without a cord.

This can also happen with the iPhone, although it is quite rare. Why doesn't the iPhone charge? If the original Apple charger doesn't charge either, what should I do? What to do if Xiaomi freezes, the method really doesn’t work. The sensor doesn’t work. What happens if you don't charge your phone? original charger…. More likely, phones that are four or five years old are susceptible to this diagnosis, because... The battery, if it fails, does so gradually until it fails completely.

Replacement iPhone batteries It's not a tricky thing, but it does require some tools. Instructions for replacement are again available on ifixit.com.

If your device is fairly new, then I don't think the problem is with the battery. Very often people contact me who charged their devices with power supplies of unknown origin, and ended up having a problem. Usually in this case the charging controller or power controller fails. But more on that below. See reason #5.

Reason #5: iPhone components are faulty

Well, the last reason for today why the iPhone does not charge is internal component failure. Yes, and don’t be surprised - this is a fairly common reason! Most often, either the battery or the power/charge controller fails. What exactly failed you can find out after diagnostics in service center. In the comments below, many people complain that their iPhone does not charge at all, or loses its charge abnormally quickly, or gets very hot, or does not accept the cable - all these are signs of a faulty iPhone power/charging controller. I wrote in detail about replacing iPhone power and charging controllers in a separate article (link). Well, if you need to explain it manually, then essentially the U2 charger controller is a chip (microcircuit) on iPhone board, which can be replaced (resoldered) with a new one. In normal service centers, this procedure does not cause any particular difficulties and costs from 2,500 to 4,000 rubles.

Try this! I can’t say right away what exactly went wrong in your case. You have a direct route to the service center. Be sure to check the functionality of your iPhone after replacing the charging controller or battery. Even new ones iPhone batteries(again of Chinese origin) may be defective and not accept a charge. If the iPhone turns off in the cold and does not turn on and what to do if the iPhone is frozen. But no. What to do if your iPhone turns off and won’t turn on. Or maybe the technician mistakenly replaced one component and never discovered the real problem. Therefore, ask the service center to connect your iPhone to a power source and make sure that the phone turns on and the charge indicator has reached at least a couple of percent.

In any case, write in the comments which method helped you. If your iPhone still won't charge, write to me about it and I'll try to find another solution for you. What to do if the iPhone thinks, Ways to recognize non-original headphones. We are always at the same place, so come and ask. In order not to lose touch, subscribe to updates using the form below, as well as to our group in contact.
A big request to all of you - help our project if you can (link below).

Due to the fact that original iPhone chargers have high cost in the market, people have a lot of problems. They cannot afford such luxury, and for this reason many people are forced to buy cheap Chinese chargers, realizing that they still have no other choice. There is a case when mobile device may not charge from a non-original cable, this article will tell us what to do in such cases and what needs to be done. Having been in such a situation, a person immediately thinks about how to cope with the problem that has arisen.

What to do when the battery does not charge from a non-original cable?

It turned out that although this is a common problem, there is a common way to solve the problem. It is enough to switch your mobile device to a mode called “ Airplane mode", and see that charging begins. After this, we transfer the device to its usual state and enjoy the result.

It happens that some people, who are most likely lucky in life, do not have any difficulties using non-original cables. They charge everything and are happy with the result.

Where did these difficulties begin? It turned out that even since the release of iOS 7, people have noticed that after the update, Chinese chargers stop working correctly. But now a solution to the problem has been found, all you have to do is use it.