Ways to turn on the phone without a button. How to turn on an Android smartphone with a non-working power button
Not for any owner mobile phone It’s no secret how to turn on the device and start working with it. But how can you turn on the phone if the device’s power button is broken? The first thing you need to do is find out the reason why it does not turn on, which may include:
The phone is completely discharged;
. the phone is simply switched off;
. The button to turn the device on and off is broken.
If the power button does not work Nokia phones, then everything is incredibly simple here. Often the button in phones from this company is located at the top of the device. It may stop working, fly out, or be pushed inward. In any of the above cases, it stops working, and this is already a problem. And any problem must be eliminated.
In order to solve the problem yourself, you will need:
Thin screwdriver;
. soldering iron with a fine tip;
. needle and tweezers;
. soldering flux;
. not insulated thin wiring;
. magnifying glass and lighting device.
If the button is stuck inside the phone, it must be removed from there using tweezers or some other sharp object. You need to use a lighting device to look inside the case and find there 2 pairs of contracts that are responsible for the normal operation of the button. After this, carefully place the contacts next to each other and close them one from each pair. After this, the phone cannot be brought to fully charged or turn it off.
If it is not possible or there is no way to remove the buttons, then use a thin screwdriver to open the phone case, lift the panel and pull it out. Using a soldering iron, you need to solder the contacts to the button, but do not overheat them.
If the button on your iPhone does not work, then troubleshooting and turning on the phone will be a little more difficult. Therefore, it is advisable to contact service center, but if this is not possible, then you just need to change the cable that goes to the button. Moreover, the part must fit and it must also be skillfully connected. Otherwise, you will need to change not only the button, but also other elements.
You can go an alternative route, just find an item in the phone settings that opens universal access to the remaining buttons, after which you need to open the Assistive touch mode and connect the utility. After that, go to the menu where the power button is duplicated and display it on the screen. By holding your finger on the unit button, you can turn off the device. In order to turn it on, you need to connect it via a computer or put it on charge, after which it turns on on its own.
But why turn on the phone if it’s a regular phone number? We offer each of you to buy a beautiful Megafon number or unlimited tariff, right now. You will be served the best specialists, which are the most wide range numbers in Russia will provide you with the option that will ideally meet your preferences and financial capabilities. You just need to call us or write, after which you will become the owner of an excellent number.
Imagine your life without fast food mobile smartphone very difficult. Therefore, its breakdown leads some to indescribable horror, especially when it comes to turning the smartphone on and off. There are several options for how to turn on your phone without a power button. For each smartphone manufacturer, you can choose your own way to start the device. Sometimes it can happen that the smartphone cannot turn on using the power button. What to do in this case? Read the article to the end, all the answers are here!
An effective way to turn on your smartphone
You can turn on the phone if the original charger is broken after connecting it to another cable with a connector micro USB. As soon as voltage starts flowing to the board, it will start Android download. Some models of Android devices can start already at this stage and further actions not required.
Power key doesn't work
If the power button does not work and connecting the charger does not help, then the question of how to turn on the Samsung can be solved this way. It is necessary to connect the Samsung Galaxy to the PC, but only if the “USB debugging” mode was initially enabled on the device. To do this, you need to install a program called ADB on your PC, then open the menu using command line and attach Android smartphone.
ADB allows you to debug Android. This is a console application that can be downloaded to any modern PC. It will help if the hardware power key on Android devices does not work.
After the manipulations have been done, enter “adb roboot” in the command window and press enter. It should be loading operating system android, or at least you will see the logo of the device manufacturer. This method will help you turn on your phone if the power button is broken.
There are many other methods, less convenient, but quite viable, it’s worth familiarizing yourself with them, sooner or later it will come in handy. Maybe someday you will surprise your friends with the unexpected ability to revive dead Android devices.
A way to bring your smartphone back to life
How to turn on your phone without a power button? If the power button does not work and the device screen is locked, you can use the “Home” key. Click on the button and enter the password, if it is set, that’s it, the issue is resolved.
Let's look at another way to turn on the device if the power button does not work. To do this, you just need to call your mobile from another device, pick up the phone and immediately hang up the call, the device will be unlocked, and you can safely go to the menu or perform another action.
If the question of how to turn on the device if the power button does not work using the proposed methods did not give results, then for further work installation of utilities will be required. They will help you use the device without problems if the hardware power key is broken.
Applications to help
Above we looked at options for turning on without a hardware POWER button, now it’s worth considering software, created specifically to help in such situations.
- Gravity Screen - On/Off (Gravity Screen) An excellent application that locks the device with one tap on the screen.
- Power button to Volume Button This application will help you turn off and turn on your Samsung using the volume keys.
- Shake Screen On Off is worth considering, the program is easy to use, all the steps are very simple, you only need a light shake to turn your mobile on and off.
How to solve the problem yourself
Let's try to fix the problem with our own hands and basic tools that are found in every home. If it doesn’t work out, we’ll take the device to specialists who know a lot about fixing Android devices.
Using improvised means
If the POWER key is broken, then you can solve the question of how to turn on the device yourself. To do this you will need to perform the following manipulations:
To turn on a smartphone without a power button, you will need a metal stick that fits into the hole where the key used to be.
The metal will close the contacts, acting as a button. Just don't apply too much great effort, otherwise you can damage the board and ruin the conductive surface. You need to hold the wand for a couple of seconds until the smartphone starts to boot. If the phone does not respond to the “homemade” power button, you can try removing the battery, removing the SIM card from the slot and removing the memory card.
Using a soldering iron and straight hands
If you feel the “strength” of a repairman in yourself, then it’s worth trying to fix the annoying flaw in the form of a broken power button on your Android phone.
- First, try to solder the button in place, but be careful, the plastic is easy to melt, the key is easy to destroy and you will have to buy a new one. How to do this correctly, see the video instructions at the bottom of the article.
- Second, at the place where the contacts are closed by the button, solder the wires and bring them out to the outside of the case. To turn on the device, you just need to short-circuit them, simulating turning on an Android smartphone, with the POWER button. This method It doesn’t have any design flair, but it’s quite functional for phones that you don’t mind anymore.
As you can see, solving the problem when the phone does not respond to the power button is quite simple. A little time and straight hands can work wonders, try and everything will work out, especially after watching the video instructions and reading this article.
Video instructions
As a result of strong physical impact or at the end of its service life, mechanical Power button on your mobile device may fail. It would seem without of this element It is simply impossible to turn on a smartphone, but in reality this is not the case. There are several ways to enter the device menu if you are not work key nutrition. Let's look at how to turn on your phone or tablet without the Android power button.
Ways to start Android without the Power key
In theory, there are several methods for booting a gadget when the power button is broken. However, it is impossible to give a complete guarantee that at least one option will work. Here, a lot depends on the model of the mobile device and on the state it is in - active or turned off.
Try to turn on Android without Power keys you can use:
- Charger and volume rocker;
- Computer and debug bridge adb;
- Special software.
How to boot Android if the phone is turned off?
If your smartphone is in an inactive state and its power button does not function, the first thing to do is connect a charger to it. On some device models, the operating system may start already at this stage.
If the desired does not happen, try holding Volume Down (Volume Up) or simultaneously holding two volume control keys while charging is on. These actions may cause the environment to load Recovery. This menu will allow you to reboot the gadget, that is, enter GUI Android.
When the Power key is working, the smartphone is restarted through the resuscitation area using the reboot system now command. If this button does not function, enter Recovery, wait a while - the phone should reboot itself.
Turning on your smartphone using the ADB debug bridge
Android Debug Bridge (ADB) is special program, allowing you to control your mobile device via a computer. With its help you can unlock root rights, change firmware, log into Recovery mode and perform a number of other actions, including restarting the phone. The only condition is that USB debugging must be activated on Android. 
If you enabled this function before the power button failed, we try to turn on the device using ADB:
Instead of ADB, you can use the utility to turn on the gadget via PC ADB Run. It is a simplified analogue of SDK Platform Tools, since almost all control commands are already written in its code. They only need to be launched using a certain number.
To log into Android via ADB Run, you need to:
How to boot Android if the phone is in sleep mode?
If the smartphone is turned on but in sleep mode, getting to its menu without the Power key will not be difficult. The main thing is not to let full discharge batteries on mobile device so that he doesn't switch off.
There are several ways to activate the screen on Android:
- Connect a charger to your mobile phone;
- Double tap on the display ( this function not supported on all smartphones);
- Click mechanical button Home, if provided for your phone;
- Call the device from another smartphone.
Now your phone will turn on with the sound control rocker.
You can also turn on Android using the built-in spatial orientation sensors. To do this, you need to download the Gravity Screen program, and then adjust the sensitivity of the vertical and horizontal orientation indicators. 
Even the most expensive smartphone is not immune from breakdowns. During operation, the device may fall to the floor, suffer from water, or receive other mechanical damage.
As a result individual elements controls may fail.
Practice shows that one of the most vulnerable points of a Samsung smartphone is the power (on/off) button.
If the main The phone button is broken or no longer responds to pressing, only a master can help correct the situation. However, you can use your smartphone for some time with broken button nutrition.
Turning on Samsung with a broken button
There are several options for solving this problem, here are the most effective of them:
1. We put the smartphone on charge. Many phone models from Samsung and other manufacturers turn on when connected to a charger. The first thing you can do in in this case- This Put the device on charge and try to hold down the volume key.
If you don't have a network connection at hand charger, but if you have a laptop and a USB cable, you can connect your phone to your computer.
2. If the first method does not work, try press the volume button to the “-“ position, the “home” button and, while holding these two buttons pressed, connect the power cable (do not release the buttons at all times!). After a few seconds (about 5-7) a warning menu should appear on the screen.
Need to remove from device back cover, insert the power cable. When the second battery indicator appears, you need to quickly unplug the power cable and also quickly remove and insert the battery. The phone will begin to reboot.
VIDEO INSTRUCTIONS
Turn on Samsung without a button using the Mobile Uncle application
Turn on every time samsung phone without a power button in all the intricate ways listed above is not entirely convenient, so after successful launch We recommend installing a special device on your smartphone Mobile application uncle tools 2017 (Mobile Uncle).
With this universal multi-tool, you can do almost anything with your Android device, completely changing the settings and functionality of the working buttons.
The Mobile Uncle application works with any device based on MTK processors.
There is another application - Power button to Volume Button (available for free in Play Store) - it was designed specifically for this case. With its help, you can transfer the function of the power button to the speaker volume keys.
There are only two active items in the application menu: Boot and Screen Off. Just check the box next to “Boot” and the smartphone will turn on using the volume rocker.
The power button is one of the main control buttons on every Android smartphone. Every day we touch the power button huge amount times to shut down, reboot or just block mobile device. However, few people appreciate the functionality of the power button until it breaks.
What to do in this case? How to restart Android without the power button? Don't worry, we'll tell you how you can do this.
There are several ways to reboot your Android without the power button, and which one you need depends on whether your smartphone is turned on or not.
How to reboot android without power button if it is turned off
Method 1. Connect your smartphone to a power source using a charger. So it should turn on automatically.
If nothing happened, you can connect your mobile device to your laptop or PC using USB cable. Although this method works every time and not on every smartphone, experts recommend using this method.
Method 2. Press the Volume button and the Home button at the same time. After a couple of seconds, a menu will open in which you can select to reboot the android.
How to reboot android without power button if it's on
Method 1. If the smartphone is turned on, rebooting Android without the power button is not a problem. Similar to the first method, in the case of a turned off smartphone, you can connect the device to a power source. If this doesn't work, ask a friend to call you on your phone. It sounds funny, but sometimes it works.
Method 2. If your phone has a physical Home button, press this button and the smartphone should wake up. You can also use the physical camera button to wake up your smartphone.
Once your Android smartphone is turned on, you must download the application. Power Button to Volume Button is good app, which replaces the main functions of the power button with a volume button. Please note that the application only works when the smartphone has a physical volume button.
And last but most reliable way reboot the android without the power button, take the smartphone for repair. Thus, you will get rid of this problem once and for all.