How to set up speed dial on Android? Frequently asked questions and troubleshooting.

Speed ​​dialing appeared back in the days of push-button mobile phones. Many contacts could then be assigned their own key - from 1 to 9. Holding the key for one to one and a half seconds led to dialing the number of the corresponding contact. Something similar is implemented in the Android operating system. But here the speed dial may differ, depending on the version of the operating system and the type of proprietary shell.

The most common speed dial option

Most often, the smartphone manufacturer offers to use a virtual keyboard to dial a number. Its number keys can be responsible for calling specific contacts. All that remains is to assign specific keys to the contacts. Let's figure out how to do this.

Step 1. Go to the pre-installed application " Telephone».

Step 2. Go to the " Contacts».

Step 3. Click on the vertical ellipsis located to the right of the search bar.

Step 4. Click on the item " Speed ​​dial».

Step 5. You will be taken to a window where you can set speed dial. By default, number 1 is assigned to listen to voicemail; usually this item cannot be changed. But numbers from 2 to 9 are free. Moreover, sometimes the smartphone manufacturer allows you to assign calls to subscribers to more complex combinations - for example, 27 or 49.

Step 6. Assign calls to contacts to the keys you need. To do this, select a number in the left column, and in the right column begin entering the subscriber's name. If a contact has several numbers, you will be asked to select one of them. You can also do without entering a name - just click on the " Contacts", then you will go to the appropriate section, where all you have to do is select the subscriber.

Step 7 You can remove a contact from speed dial by clicking on the “ minus».

This example is based on the use of a smartphone manufactured by Samsung. On other devices, your steps may be slightly different.

Speed ​​dial as a “Favorites” section

Some devices do not have speed dial as such. Instead, their application " Contacts"equipped with something like a section " Favorites" In particular, you can see this when using a Nexus 4 smartphone. To add contacts to this section, simple steps are required:

Step 1. Go to the application " Telephone».

Step 2. Visit the " Contacts».

Step 3. Click on the contact you want to add to " Speed ​​dial».

Step 4. Press asterisk, which is in the upper right corner. It was empty, and now it will be filled - this means that you managed to do everything necessary.

Step 5. Return to the " Speed ​​dial" to make sure that the selected contact is included in this section.

Step 6. The contact is removed from " Speed ​​dial"in the same way - you need to click on the star again.

Speed ​​dialing on Android can be implemented in different ways. But in any case, it helps reduce the time it takes to dial certain contacts, so we recommend using this feature regularly!

A beep is a great way to let the user know that an action has been performed. However, by default, the Android operating system produces too many beeps. This happens not only when there is an incoming call or SMS message, but also when the user interacts with the device. For example, sound appears when typing text or a phone number. Many users do not like this constantly beeping phone sound, and they tend to turn off the keyboard sound.

If you want to turn off the sound when typing on the Android keyboard, then you need to open the Android settings and go to the “Language and input” section, which is located in the “Personal data” settings block.

After this, you will see a list of keyboards installed on your Android device. Select the keyboard you use for typing.

And go to the settings of the selected keyboard.

In the keyboard settings you can change a lot of different parameters. Among other things, options will be available here to turn off vibration and keyboard sound.

To turn off the sound when typing on the keyboard, move the corresponding switch to the “Off” position and exit the Android settings. After that, open any application and check if the sound appears when typing.

Mute the sound when dialing a number

It should be noted that the instructions described above apply only to the keyboard for typing. If you want to turn off the sound that appears when you dial a number, you can do this through the Contacts application. Open this application and go to settings.

In the application settings, open the “Sounds and vibration” section.

And turn off the keyboard sound when dialing a phone number.

After that, exit the Contacts app settings and try dialing the phone number. If everything was done correctly, the sound will no longer appear.

Instructions vary depending on whether the Internet Fax feature is available and whether your device is configured for Internet Faxing (if applicable).

  • To change or delete a One Touch Dial number, see .
  • To change or delete a speed dial number, see .

SECTION A: CHANGING OR DELETING NAMES AND ONE-TOUCH DIAL NUMBERS

You can change or delete an existing name, number or email dial with one click by following the instructions below:

  1. Click Menu and select Fax => The address book => One-click dialing.
  2. Press the key with one touch dial number, which you want to change or delete.

    The Brother machine's display will show the name or number stored in the corresponding One Touch Dial location, and will display the operations " 1. Change. 2. Delete."

To access numbers 12 through 22, press the corresponding One Touch key while holding down the key Shift.

      1. Click 2 for selection DeleteErase data? ".
      2. Click 1 for selection Yes and go to.
    • 1 , to choose Change.
  2. Perform one of the following actions:

    • Repeat/Pause.

      Repeat/Pause repeatedly.

  1. Click OK.
  2. Perform one of the following actions:
      1. By using left or right arrow
      2. Press the key Clear

        You can press the key Clear

      1. By using left or right arrow
      2. Enter a character.
  3. Click OK.
  4. Perform one of the following actions:
    • To change or delete another One Touch Dial number, repeat.
    • To complete changing or deleting names or one-touch dial numbers, press the Stop/Exit.

SECTION B: CHANGING OR DELETING NAMES AND SPEED DIAL NUMBERS

You can change or delete an existing name or speed dial number by following the instructions below:

  1. Click Menu and select Fax => The address book => Speed ​​dial.
  2. Use the number pad to select a three-digit speed dial number (001 - 200). Click OK.

    The Brother machine's display will show the name or number stored in the corresponding speed dial location and will also display the operations " 1. Change. 2. Delete."

  3. Perform one of the following actions:
    • To delete the current number, follow the instructions below:
      1. Click 2 for selection Delete. The display will show " Erase data? ".
      2. Click 1 for selection Yes and go to.
    • To change the current name or number, press 1 , to choose Change.
  4. Perform one of the following actions:
    • To leave your current number, go to.
    • To change the current number, use the number pad to edit or enter the fax or telephone number.

      The number must be no longer than 20 digits.

      To add a 3.5 second pause to a number, use the key Repeat/Pause.

      You can add a long pause by pressing Repeat/Pause repeatedly.

  1. Click OK.
  2. Perform one of the following actions:
    • To keep the current name, go to.
    • To remove a single character, follow these steps:
      1. By using left or right arrow Move the cursor under the character you want to delete.
      2. Press the key Clear to delete a character, and enter the correct character.

        You can press the key Clear several times to remove multiple characters.

    • To add a symbol, follow these steps:
      1. By using left or right arrow move the cursor to where you want to add a new character.
      2. Enter a character.
  3. Click OK.
  4. Perform one of the following actions:
    • To change or delete another speed dial number, repeat.
    • To complete editing or deleting names or speed dial numbers, press Stop/Exit.

Today we’ll talk about a part of the iPhone that you use every day - its keyboard. Sometimes the clicks of the keys are fun to listen to, but when they get boring, you just want to turn them off.

Some time passes and it’s a bit boring to type text without sounds, and now I want to go back and turn the key sounds back on.

Today we’ll talk about exactly these things and all the main aspects that may affect the sound when typing on your favorite iPhone.

Like any other phone, this feature is present on the iPhone and many people actively use it. After all, some people get a kick out of clicks, but sometimes they irritate many people.

To turn off the sound of keys when typing text or a number, there are two options:

We choose a method more convenient for you and use it. Typically, settings in Apple technology are very limited and so far there are only such options.

If you go to sounds, you will not find anything that will help you adjust the volume when typing any text on your smartphone.


Unfortunately or fortunately, there is only one way: when you adjust the overall volume of the phone, the volume of your keys also changes at the same time.

On the one hand, this is quite convenient, because you don’t need to look for anything in the settings. On the other hand, sometimes you want to set a certain level and use it.

Now talk about whether it is even possible to change the standard key sound to some other one. The question is quite interesting, so let's figure it out.


If you don’t like using such a thing as Jailbreak, then no way. In the latest iOS 10, Apple changed the standard sound to a new one, but there is no way to do it yourself.

If you install Jailbreak on your iPhone, then many possibilities will open up for you, including replacing key sounds. It's up to your discretion.

conclusions

Apple always dictates the rules and users of this technology have long been accustomed to this. Most of the settings are very limited, including everything related to the keyboard.

If you just want to turn it on or off, then please, but no more. On some level, they are right, why clutter your phone with unnecessary functions.

The developers of the iOS operating system always try to make the most convenient keyboard out of all existing ones, and they do it quite well.