How to remove the password when it is turned on. “Global login problems” or “How to remove a password from a computer? stage

For many users, entering a password on a computer during its startup is a procedure that is, as they say, a burden. Some people ignore recommendations for using Windows safely due to bouts of laziness. Other comrades simply do not need to protect their PC with a password and type a character key every time they turn it on. Because only they use the computer, and others do not have access to it.

This article will tell you how you can remove a password from your computer in various ways.

Method number 1: setting up an account

1. Press the key combination - “Win” and “R” (simultaneously).

2. In the “Run” line, type the command - control userpasswords2

3. Click OK.

4. To remove the password when logging in, in the “Accounts...” window, click on your profile in the “Username” column.

Note. You will not see panels for entering credentials; the system will perform authorization automatically.

6. Click the "Apply" button.

7. In the new window, enter your account login and password twice. Click “OK” again.

Remember! By removing your password, you give others unhindered access to your personal data.

Method number 2: changing registry settings

Only an experienced user can disable entering a password manually through the registry options. Therefore, before you begin to implement this method, think carefully about whether you can perform it correctly. Setting incorrect characteristics and entries in the registry can disrupt the operation of the entire operating system and render it unusable.

Note. You can also create a backup copy of "branches" before editing. In case of an error, you can use it to return the state of the registry settings to their original position.

1. As in method No. 1, open the “Run” panel.

2. Type the directive - regedit. Press "Enter".

3. Go to the section:

HKEY_LOCAL_MACHINE → Software → Microsoft → Windows NT → CurrentVersion → Winlogon

4. In the Winlogon folder, open the AutoAdminLogon parameter (double-click) and change its parameter to 1.

5. In the DefaultDomainName parameter, enter the name of your account.

Attention! If this setting is not in the directory, create it: right-click → New → String parameter.

6. Create a string parameter entry called DefaultPassword. And then set a password for logging into the system (in the setting value field).

7. Close the editor, restart your PC.

Windows will start without prompting for credentials.

Method number 3: disable on the command line

1. Open the Start panel (click the first button on the taskbar).

2. In the search line, enter - CMD.

3. Right-click on the icon of the same name that appears at the top of the panel.

4. In the context menu, launch the “Run as administrator” option.

5. Type in the line - net user, press “Enter”.

6. Find your account (name) in the list.

7. Run the same command in the format:

If the message “Command completed successfully” appears, you can log into the operating system without logging in.

Method number 4: changing the login settings using the Autologon utility

2. Unzip the downloaded archive (right-click → Unzip…).

3. Run the utility executable file.

4. In the installer panel, click "Agree".

5. In the setup window, enter your account login and password.

6. Click the “Enable” button.

How to remove authorization after resuming from sleep mode on Windows 10?

To partially relieve yourself of the need to enter a login and password by activating the machine after sleep mode:

1. Go to the section: All settings → Accounts.

2. Click the “Login Options” subsection.

3. In the “Login required” option, set the value to “Never”.

Good luck with your Windows OS setup!

Typically, during the Windows 10 installation procedure, an account is entered, which subsequently entails the need to enter a password each time you log in to the system.

This causes some inconvenience to the user, and if the code contains a large number of heterogeneous characters, then there is also significant unjustified loss of time. Windows 10 has several options to shut down and quickly resume its working state.

For example, each time the computer owner exits the hibernation state, he or she must enter a password. Below is a guide that will help you disable the code request when logging into Windows 10.

Stage 1. Log in to the “User Accounts” menu

The following steps need to be taken:

Stage 2. Disable the display of the window for entering account data and code when logging into the OS

In the main menu “User Accounts”, enter the “Users” tab and here you need to uncheck the “Require user login and code” section. Then click “Ok”.

Stage 3. Confirm to the system the seriousness of your intentions to deactivate the password request

Performing the steps in the second step will cause a menu to appear on the screen asking Windows to confirm whether to cancel the code disabling. The algorithm of sequential actions is as follows:

1. In the menu that appears, enter the valid code to log into Windows 10 in the “Password” field;
2. In the next field “Password Confirmation” enter the same code again;
3. Next click on “Ok”.

Ready! Following the steps prescribed in steps 1-3 allowed us to successfully disable the code prompt when starting Windows 10. Now, after loading the OS, entering account credentials is not necessary.

However, after hibernation, the system will continue to prompt for a code.

Below are instructions in the form of “4 steps” to solve this problem.

Stage 4. Disable the code entry window when resuming from hibernation mode

To remove the OS login code after hibernation, you need to take the following steps:

All! Now logging into Windows 10 will not require the user to enter a code. Following the steps in all four stages of the instructions allowed us to remove the interfering window every time Windows boots or after the system “wakes up”.

The described method is not the only one. You can also remove the code prompt when logging in from the OS through the registry editor.

Alternative methods to solve the problem

There are two additional ways by which you can also effectively get rid of the problem in question.

Remove password using Registry Editor

An additional effective method to remove an annoying request is to use the Windows 10 Registry Editor.

To do this, follow the following step-by-step guide:

Getting rid of the user credentials request

In the case where the user uses a local account on the PC, you can remove the request for this data for a specific user. To do this, you need to perform several sequential actions:

1. Open the command line with Administrator rights;
2. Type “net users username”;
3. Click “Enter”;
4. Quit the command line;
5. Ready! The OS will no longer prompt a specific user for a password.

Conclusion

As you can see, the process is quite simple to follow. The computer now quickly launches the operating system desktop. No need to waste precious time by simply skipping the login screen every time you turn on your PC. From now on, the user will not need additional effort to remember and type characters. But now the computer owner will need to take special care to prevent people who could unwittingly delete the necessary files, for example, children, from accessing important information, since to access the user’s desktop now you only need to press the computer’s power button.

When you turn on the computer, it usually asks you to enter an access code. Protecting your account with a password is designed to prevent access to your confidential information for other users. However, if you are single user personal computer, constantly asking for a password when logging in will be more of a hindrance than a help.

This is an extra action, extra information that needs to be remembered, an increase in boot time when turning on the PC, and so on. Besides, if you forget it, you will get a lot of problems.

Therefore, for most users it is easier remove password entry for your account in Windows 10. This article is devoted to this issue.

Disabling a local account password

If you use a local account to log into Windows 10, cancel password entry simple enough. You can simply delete it.

To do this, do the following:

1. Call up the menu " Start", using the Win key, or using the corresponding icon on the quick access panel.
2. Open " Options" You can also call this interface using the key combination Win + I.
3. Go to the section called "".
4. Using the navigation menu on the left side of the window, go to the “ Login Options».
5. In the column " Password» Click the Change button.
   
6. Please enter the current access code for your account.
   
7. Leave all fields blank and click Next to remove the check.
   
8. If the OS asks you to reboot, do it.

Active the password will be removed immediately and will not be required to log into the Windows 10 operating system the next time you turn on your personal computer.

Alternative way to disable the request

If you don't like the settings menu that was introduced in Windows 10, you can remove the passcode using the usual control panels. The tool " Change».

Do the following:

1. Click on the button " Search» in the Quick Access Toolbar.
2. Enter« control Panel» in whole or in part.
3. Run found utility.
4. Go to the "" category.
   
5. Click on the hyperlink " Deleting user accounts».
   
6. Select your account from the list provided.
7. Click on the hyperlink " Change password».
   
8. Enter a valid password, the remaining fields should be leave blank.
9. Click " Change password» to save settings.
   

As in the previous method, the password will be removed and you will not need to enter it the next time you log into Windows 10.

Disable the prompt for a Microsoft account

The methods described above allow you to get rid of the password check at login, but only when you work with local account. However, Windows 10 allows you to log in to the system using single Microsoft account. And it is no longer possible to remove the password from it. However, you can configure automatic entry of login information when starting this personal computer. This can be done in two different ways.

Account Settings

The first way to remove the check is simpler. However, unfortunately does not work on all computers. It is highly recommended that you try it first. And in case of failure, move on to the next point. To set up automatic entry without prompting, follow the instructions below:

In most cases, this is enough to log into the OS without asking for a password. However, if you were unable to remove the check, you will need to do manually editing the registry.

Registry changes

The registry stores data that Windows 10 uses to operate. By changing existing entries and creating new ones, users can seriously change the way the operating system works. Therefore, all changes must be made extremely carefully, since any error can lead to incorrect operation of the computer.

Before starting work in the Registry Editor, it is strongly recommended to create a system restore point. If something goes wrong, you can easily roll back to the saved version of Windows 10 without having to reinstall.

Registry Editor

To enter the editor, users will need to do the following:

1. Call up the dialog " Execute" using Win + R.
2. Type regedit and click OK.
   
3. If the program requires administrator permission, click OK.
4. On the left side of the editor there is a directory tree. Use it to find the directory HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon

Synchronizing user data within one account is a fashionable trend today, which has its advantages. Many people log in to the Chrome browser using their Google account, thereby having their own browser settings on different devices (different PCs, smartphones). Microsoft provides similar functionality in its new operating systems.

When loading Windows 8 and 8.1 when working through a Microsoft account, the system asks you to enter the user password, and so on every time you turn on the computer. Of course, security is paramount today, but if the computer is used only at home and only by you, the need for constant authorization loses relevance and begins to cause inconvenience.

How to disable the password prompt in Windows 8.1 and 8 when you turn on the computer when using a Microsoft account?

Using a keyboard shortcut Win+R let's open the utility Execute. In the window that opens, enter and click OK.

In the window that opens " User Accounts"select the required user and uncheck the box for him in the item Require username and password.

After that, click Apply. A window will open to fill in the data for automatic login. The username will already be filled in here, all you have to do is enter your password and click OK.

Now you can safely restart your computer and watch the login to Windows 8 without asking for a Microsoft password.

II Method.

Replacing your Microsoft account with a local one

On the menu Start select Change computer settings.

Go to the tab Users and further on setting Switch to local account.

In this case, the system will ask you to enter the current password for your Microsoft account - fill it out. Then we will be prompted to enter a new password for the local entry - we don’t enter anything here, just click Next, after which the users will change.

Continuing to unravel the mysteries of the Windows 10 operating system, I learned about the following user problem. Some people cannot remove the password that the Windows 10 operating system asks us every time we log in or when we exit sleep mode. Having figured it out a little, I decided to write this article and explain to my readers what’s what.

And so, in the Windows 10 operating system there can be two accounts: either a local account or a Microsoft account. If you have a local one, then you can safely start disabling the password now, if you have a Microsoft one, then first you will need to transfer it to local, and only then disable it. If you don’t understand what we’re talking about at all, then finish reading the article, and only then start practicing.

Local account– this is your personally created username and password; they are used when logging into the system.

Microsoft account– this is your registration data on the Microsoft website, where your email address is used as a login.

In the list of accounts

And so we begin. Press the Win+R key combination and in the window that opens, write netplwiz, click “OK”

In the window that opens, in the “Users” tab, remove the checkbox next to the item "Require username and password". Click "OK"

In theory, this should be enough, but just in case, let's move on. Click the “Start” button and select “Settings”

In the window that opens, click on the tab "Accounts"

If this is not the case for you, then disconnect your account from Microsoft by clicking on the “Disable” button. In the window for switching to local, you enter your password and username. Next press "Log out", after all this the system will be transferred to a local account.

Via login options

Removing the password in the section "Login Options". They write to us here that if we are absent, the system should prompt us to log in again after some time. Next to this item, select the value “Never” from the drop-down list (this means that the operating system will no longer ask us for a password when exiting sleep mode). And next to the “Password” item, click on the “Change” button.

Enter your current password and click on the “Next” button:

In the next window we leave all the fields empty, which means that now we won’t have any password at all:

That's how it is, for us in the section "Login Options" Now they write that our account does not have a password.

We could end here, although there is another way to disable the password through the registry, but I don’t recommend using it, because you can create the wrong parameters and values ​​and cause trouble.

And also watch a video on the topic:

Rate this article: