What do you need to do to listen to the disc? Watching a DVD on a laptop or computer

In the modern world of the Internet, where you can watch movies and listen to music online, as well as download any program you need from the Internet, the need for disks is gradually disappearing. But at the same time, users from time to time have a question about how to run a disk on a laptop. Before answering this question, it is worth noting that, in addition to DVD and CD-ROM disks, there are Windows boot disks and a laptop hard drive.

Launching the disk on a laptop

So, before launching a disk on a laptop, you should find out whether the drive reads this format. To do this, look at the marked value on the drive: if the required format is not in the list, it means that it will not be read by the laptop equipment. To run the disk on a laptop, you must follow the following instructions:

Press the Eject button of the drive to open it.
We fix the disk in the spindle for fixation. It is important to install the disk with the correct side, otherwise it will not be readable. If the disk has an image, it cannot be installed face down. If it is double-sided, then its side is written closer to the hole of the disk (immediately taking into account that the bottom side will be read).
We close the drive tray; on some models, you must first unscrew the disk.
We wait until the disk is found by the laptop.
Ready!

Now the user knows how to run the disk on a laptop. But if the disk is not readable and the user did everything correctly, this may be a sign of a device malfunction or damage to the disk surface. To check one of the problems, we launch another disk in the drive: if it is readable, then the problem is in the disk, if not, then it is in the equipment, in which case you should contact a technician.

How to run a Windows disk on a laptop?

To perform this action, you must perform the following steps:

Insert the boot disk into the drive.
Restart the device and enter the BIOS system. To do this, when loading the device, press the “Del” key (if the user does not know which button is responsible for starting the BIOS on his device, it is necessary to look at the bottom of the screen when starting the equipment; as a rule, the required key is indicated opposite the inscription “to enter setup").
Next, the user is taken to the BIOS menu. To perform actions in this window, you must use a laptop keyboard.
Then select "Advanced BIOS Features".
In the window that appears, select launch using CD-ROM.
Then save the settings by pressing the F10 key.
Next, the laptop will begin to reboot, and a window will appear with the inscription “Press any key to boot from cd or dvd”, press any key.
In the installation window that appears, click “continue” and carry out the Windows installation procedure.

How to start a hard drive on a laptop?

If the laptop stops seeing the hard drive, then most often it’s all about the drivers. To update the driver, use the following instructions:

Open the device manager: to perform this action, write “device manager” in the search bar in the start menu.
In the window that appears, select disk devices.
We right-click on the equipment we need.
Select “update drivers”.
In the window that appears, click on the option in which the system itself will find the necessary driver and install it.

Finally

Practice shows that serious problems with launching disks on a laptop cannot arise. This article not only answers the question of how to start a disk on a laptop, but also how to start Windows and a hard drive.

This is a laptop computer.

A laptop is the same computer as a personal computer. And it has the same parts, just smaller. That's why laptops are more expensive.

A laptop can be compared to a mobile phone, and a regular personal computer can be compared to a regular home phone.

In order to open a disk, floppy disk or flash drive on a laptop, you need to insert them first.

Look at the laptop:

If the laptop has a special floppy drive, that is, a device for floppy disks, then you can open the floppy disk. But most laptops do not have this drive, since floppy disks are considered obsolete and unreliable.

You can learn more about floppy disks by reading the article "Floppy Diskettes".

To insert a floppy disk, there should be a hole like this:

If your computer does not have such a hole, then you can skip the next paragraph.

Insert the floppy disk along the arrow that is drawn on it until it stops (until it clicks). After you have inserted the floppy disk, go to “My Computer”. It is either located on the Desktop, that is, on the screen, or it can be opened from the Start button:

Then double-click with the left mouse button on the icon

"Disk 3.5" (A):

You will see what is written on the floppy disk (files and folders). To remove a floppy disk from your computer, you must first close all files and folders that you opened from the floppy disk. Then press the small button under the hole into which the floppy disk was inserted. The floppy disk should pop out of the laptop on its own. Now about how to open CD or DVD disk:

Either on the side or front of the laptop there is a storage device for disks. Is it called CD or DVD? drive.

To open it, you need to press the small rectangular button.

When you press this button, a click will be heard and the drive will slide out slightly from the laptop. Gently “help” him move out all the way. Then you need to literally “put” the disk on it, shiny side down, and “push” it into the laptop until it clicks. After you have inserted the disc, wait 15 seconds: the disc may open on its own (this happens with discs on which movies and music are recorded). If this does not happen, open the My Computer icon. It is either located on the Desktop, that is, on the screen, or it can be opened from the Start button:

Then double-click the left mouse button on the “CD drive” icon (can also be called CD-RW, DVD, DVD-RW drive).

What is recorded on the disk will open.

Now let's learn open flash drives on a laptop. The flash drive looks like this:

In order to open a flash drive on a laptop, you need to insert it into a special hole:

You will find several of these holes either on the side or at the back.

After you insert the flash drive into one of the holes, open “My Computer” (let me remind you, it is either in “Start” or on the Desktop).

A new icon should appear there. For example, like this:

This icon is usually called "Removable Disk". Double-click on it with the left mouse button. You will see what is written on the flash drive (files and folders).

Before removing the flash drive from the laptop, click on the special icon at the bottom right (next to the clock) once with the left mouse button.

The message “Safely remove USB storage device” appears. Click on it once with the left mouse button. The message “Hardware may be removed” will appear. Now you can remove the flash drive from your computer.

This seems obvious, but not to everyone. Many new laptop owners don't find it as easy to play DVDs on their new Acer laptops as it seems. In connection with my work, I am often asked this question. Here are some simple solutions to help you play DVD on your Acer laptop.

Instructions

1 Make sure your laptop has the ability to play DVDs. Your laptop should have a familiar white logo on the DVD drive slide-out cover. If this image is not present, then you will only be able to play CDs.
2 If you find the DVD logo, press the button on your Acer to pop out the DVD drive cover.
3 Place a DVD face up and gently push the lid back in place, then wait until playback starts automatically or a menu appears.
4 If your DVD doesn't start playing automatically (or when you see a selection menu), you'll need to set it to autoplay. In Microsoft Windows, click on the "Start" button -> "Control Panel" -> "AutoPlay" and select automatic DVD playback.
5 If you are running Windows Vista Home Basic Edition, Windows Media and Real Player may not play DVDs correctly. You might want to download a free player from download.com. Then you will have to launch the player manually each time.
6 Select what action you want the Windows operating system to take every time you launch a DVD on your Acer laptop (from the drop-down menu). You'll have at least two media players to choose from, or you can select "Take no action" if you're not using the player via the pop-up menu.
7 Remove the DVD and reinsert it into your Acer laptop. Now all your DVDs will play successfully every time using your chosen player.
8 Find the control buttons at the bottom of the screen. These are standard DVD controls, such as the volume control or pause button. You can press F11 for full screen view if you are happy with the settings.

Hello, friends! In this article, we will talk about how to include disks in a cd-rom. It was not by chance that I decided to write an article; a user contacted me with the question that after a minor glitch, the autorun of CDs and DVDs stopped working for him. Let's take a little look at why disk autorun is needed in general.

For example: you have a CD or DVD with a program, game or movie, you open the CD-ROM and put the disc in it, the drive works, but nothing appears on the desktop for further actions.

You have to open “My Computer” and at the same time also open your CD or DVD disc in order to play it. Agree this is not very convenient and then let’s look at how to enable or dvd disks.

In order to enable autorun of CDs or DVDs, go to the “Control Panel” and open the “Autorun” control.

You will see this window with autorun settings. For each individual media, you can select the setting you need. See the screenshot, I marked everything with arrows: To enable autorun, check the box next to “Use autorun for all media and devices”, then next to each media, click on the arrow so that a drop-down menu appears with the choice of enabling or disabling CD or DVD autorun.

Dropdown menu settings:

If you select the setting - “Install or execute the program from the user’s media,” then when you start the CD or DVD disc, the program or game will begin to be installed immediately. I don't recommend you do this.
If you select the setting - “Open a folder to view files using Explorer”, then when you launch a CD or DVD disc in a window on the desktop, the disc with the available information will be opened.
If you select the setting - “Do not perform any actions”, then the CD or DVD disc will not autorun.
If you select the setting - “Ask every time”, then when you start the CD or DVD disc, a window will appear on the desktop with a choice of actions, “Install” or “Open for viewing”.

If after all the settings you or still doesn't work, then go to the registry. In the Start menu, in the search bar, enter “Regedit”. In the registry window we look for this section
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CDRom
We look in the right column for the value AutoRun, double-click on it with the mouse button. There should be a number in the window that opens 1 this parameter is responsible for enabling CD-ROM autorun, if enabled 0 , this means that autorun is disabled.

Let's move on. If you have everything enabled in the registry, but CD autorun does not occur, then do the following. Go to “Device Manager”, select “DVD and CD-ROM drives”, right-click on the device and delete it. We restart the computer, after rebooting, the system will install the required driver and detect the device.

Well, that seems to be all, I hope that the article described everything clearly and that this information at least somehow helped you. If you have anything to add to the article, write in the comments, I will be glad to communicate. Good luck to all!!!

A laptop is a portable computer.

A laptop is the same computer as a personal computer. And it has the same parts, just smaller. That's why laptops are more expensive.

A laptop can be compared to a mobile phone, and a regular personal computer can be compared to a regular home phone.

In order to open a disk, floppy disk or flash drive on a laptop, you must first insert it.

Let's start with the floppy disk:

Look at the laptop:

You can learn more about floppy disks by reading the article “Floppy disks”.

To insert a floppy disk, there should be a hole like this:

If your computer does not have such a hole, then you can skip the next paragraph.

Then double-click with the left mouse button on the icon

"Disk 3.5" (A):

Either on the side or front of the laptop there is a storage device for disks. It's called a CD or DVD drive.

To open it, you need to press the small rectangular button.

Then double-click the left mouse button on the “CD drive” icon (can also be called CD-RW, DVD, DVD-RW drive).

What is recorded on the disk will open.

Now let’s learn how to open flash drives on a laptop. The flash drive looks like this:

In order to open a flash drive on a laptop, you need to insert it into a special hole:

You will find several of these holes either on the side or at the back.

After you insert the flash drive into one of the holes, open “My Computer” (let me remind you, it is either in “Start” or on the Desktop).

A new icon should appear there. For example, like this:

This icon is usually called "Removable Disk". Double-click on it with the left mouse button. You will see what is written on the flash drive (files and folders).

Before removing the flash drive from the laptop, click on the special icon at the bottom right (next to the clock) once with the left mouse button.

sites.google.com

How to watch a DVD on a computer or laptop, how to insert the disc correctly

There are many special players for reading DVDs.

Among them: PowerDVD, Windows Media Player, Media Player Classic.

To view the contents of the disc you will need one of these programs.

The easiest way is to use a player that is used by many Windows users, Media Player Classic.

It is worth remembering that the standard player sometimes does not recognize digital signatures and codecs, so you have to use other players.

Launch using PowerDVD

Unlike Media Player Classic, this program is paid. It can read media of any format, from MPEG and MP3 to ASF and WMA.

Launch using Windows Media Player

This program is available on every Windows computer, which makes it very convenient for reading disks. The playback manipulations are exactly the same as for Media Player Classic, however, this player has a number of its own features.

The player does not play files because:

The DVD was recorded in a different region. Mircosoft products have algorithms that prevent pirated recordings from running.
The standard player conflicts with other players. In such cases, you must stop using third-party software.
The computer's optical drive is damaged.
The file format is not compatible with the player.

composs.ru

Booting from a disk in a laptop

Booting from the disk in the laptop does not work, the instructions are lost, I pressed all the buttons on the keyboard that I could, as a result it started some process, now Windows will not boot, I also can’t get into the BIOS, help, HP laptop. When I read this request an acquaintance, he uttered an interesting phrase: “Can you imagine what will happen when it gets into the BIOS?” I imagined and even began to fear not for the laptop, but for the girl, because you can boot from the disk in the laptop without changing the settings in the BIOS.

We will give two examples with an HP laptop and a Sony VAIO. So our first laptop is HP.

I would like to note that the principle of changing the boot device is not the same for all laptops, and if you have experience with a device from one manufacturer, most likely you will experience difficulties with a laptop from another manufacturer. But as they say, you don’t need to be afraid of difficulties, think, after all, this computer is yours, aren’t you interested in finding out how it works, and you should even be able to handle things like setting boot from disk in your laptop or getting into the BIOS. I hope our article will help you and also, as soon as we get our hands on a laptop from any other manufacturer, screenshots of the boot selection will be immediately added to this article. Let's start with an HP laptop. One of the largest information technology manufacturers in the world made sure that we did not experience any problems when working with his device and it was very easy to set it to boot from disk.

When you turn on the laptop, a prompt appears -> Press ESC to load the start menu, click.

The menu appears:

F-1 system information F-2 diagnostics F-9 (changing boot settings) will give us the opportunity to boot from the disk on the laptop without going into BIOSF-10 the terrible BIOSF-11 restoring the laptop to factory settings

We skip the first and second points and it’s so clear, let’s press F-9 Boot Device Options (change boot settings) and see what happens, press

This window appears, where they explain to us in the language of a potential enemy that if we are afraid to enter the BIOS, we can change the laptop boot from the disk here. We are glad that using the F-10 key, we can change the boot priority, by the way, now the boot is set just from the disk and if we reboot, and there is a DVD with the operating system in the drive, its installation will begin. The job is done, and now let’s look at our BIOS with the bravest ones, exit this menu and press ESC, the reboot occurs. When selecting the start menu, press ESC again and then F-10

And here we are in enemy territory, select the System Configuration option with the arrows on the keyboard and press Enter

Before us is the menu of this menu, select Boot Options

Here we allow or prohibit changing the boot from any device. Let me explain, for example, you see the latest Internal Network Adapter device (network loading) is set to Disabled,

This means that loading over the network is prohibited; if we set it to Enabled, then firstly, loading over the network will become possible, and secondly, the offer to boot over the network will appear at the very beginning, in the start menu. The start menu appears when the laptop boots, when you first press ESC and then F-9, where without going into the BIOS you can change the boot priority to the disk drive, this menu will look something like this. Note: unfortunately, when writing this article, we had already given away the laptop, so The screenshot was made in Photoshop.

Now go back and select the Boot Order option and press Enter

in this menu we see that the laptop is ordered to boot from the hard drive,

and we can choose whatever our heart desires, we want and boot from a flash drive, by the way, loading from a USB device is just below. By the way, you forgot that we are on enemy territory, so we quickly change the boot from the hard drive to the disk drive, move using the keyboard to our CD/DVD ROM, then using the F-6 key, as indicated on the right side of the BIOS window, pull out the CD/DVD ROM to the first position.

Next ESC, exit this menu, then ESC again and move to the Exit option, press Enter, we are asked to save the changes made, we agree Yes.

A reboot occurs and if there is a Windows disc in the drive, the installation process will begin. It's the turn of the Sony VAIO laptop. When you turn on the laptop, a prompt also appears to press F12, but this means booting over the network, we don’t have instructions for the motherboard, to get into the BIOS you basically need to press F2 or Delete when booting, less often, even less often, press F2 and enter the BIOS

Using the arrows on the keyboard, select the Boot tab, which is responsible for changing the boot device and press Enter

On the Boot tab, we see that the first boot device is a flash drive, select it using the keyboard and press Enter. In the menu that opens, select our Internal Optical Disc Drive

Now the first boot device is set to the floppy drive

www.imprice.ru

How to start a laptop from disk via BIOS

In order to start a laptop from a disk, you need to change the boot order of devices. By default, a work laptop has the following order: hard drive, DVD drive, flash drives, and so on. The CD can contain both an operating system installer and a full-fledged mobile version of the operating system, so that if the laptop OS fails, you can repair it or save important data before reinstalling the OS.

To enable booting from a CD, you must enter the BIOS by pressing the “Delete” (Del) or “F2” button after turning on and before loading the operating system. On some laptops there are other BIOS entry buttons, but they are so rare that they are rather the exception to the rule.

In the BIOS, select the “Boot” or “Boot menu” tab. If there are no such tabs, in the “Advanced” tab you need to look for the line “Boot” or “Boot priority”. In the “Boot” tab or line, you should set the boot order so that the disk drive is in 1st place.

After this, you need to press F10 and Enter, or select Save settings and reboot in the last tab, thereby saving the new boot order settings.

Insert the boot disk into the drive, now booting from the CD will be performed automatically. After completing all operations that require booting from disk, you should go into the BIOS again and set boot from the hard drive first. This should be done to load the operating system faster.

If the first thing in the queue is booting from a DVD, then every time you turn on the laptop, the drive is first polled, and after the computer realizes that there is no disk in the drive or the disc is not bootable, it boots from the hard drive. At the same time, the loading time of the operating system increases.

SovetClub.ru

How to install boot from disk on HP

Every user remembers the BIOS (Basic Input/Output System) only when they need to reinstall the operating system from a disk. The key combination that calls up the start menu with the necessary options for each laptop depends on the model of the laptop's motherboard. When loading, the system gives a hint for a certain combination, for example, for HP laptops it is the “Esc” button - “Press the Esc key for Startup Menu”.

One of the largest information technology manufacturers in the world, Hewlett-Packard, took care not only of hassle-free entry into the start menu to reset boot parameters, but also developed two options for changing settings: without entering the BIOS and directly in the BIOS environment. You can select the required item in the start menu:

"F-1" - system information,
“F-2” - system diagnostics,
“F-9” - change boot settings,
"F-10" - BIOS,
“F-11” - restore the laptop to factory settings.

The “F-9” item allows you to change boot settings without using the BIOS menu. When you select this item, you are given a choice between a CD/DVD drive and an HP laptop hard drive. Navigation is carried out using the cursor keys, that is, the up and down arrows. The selected option is activated by pressing the “F-10” key, which confirms changes in the settings and, when a CD/DVD disk with the operating system is inserted into the drive, starts loading it.

Point “F-10” opens the BIOS environment for changing parameters. Navigation is also carried out using the cursor control keyboard. The name of the current section or subsection is displayed at the top of the window. To change settings you need the “System Configuration” section. In the menu that opens, the “Boot Options” section is responsible for changes, which provides a list of possible data download sources. If any value from this list is activated, then opposite it in quotes is the value “Enabled”; if not, then “Disabled”. Accordingly, we activate “CD-ROM Boot”. Below the list of possible activations there is a “Boot Order” option, which you must enter to change the order of boot places. By default, the list is headed by the laptop’s hard drive; to change the list, use the “F6” key to move “CD/DVD ROM” up to the first position. To exit to the main BIOS menu after the necessary changes, use the “Esc” key. In order for the changes to be saved, you need to confirm them when exiting the BIOS.

If in both cases, when changing the parameters, booting does not occur from the selected CD/DVD disk, then you need to make sure that the disk is multiboot and that there are no defects or damage to the disk. You can use Nero Express 6 to create a multiboot disk with an operating system such as Windows XP.

After you restart your HP laptop, the operating system will load from the drive. After installing the system, you will need to go into the BIOS again and return the boot settings from the hard drive.