Program for formatting in fat32 windows 10. How to format a flash drive in FAT32: step-by-step instructions
Hi all! Today's article is about how to format a flash drive in FAT32. The FAT32 file system is outdated, but nevertheless, sometimes situations arise when it is necessary to format a flash drive in this particular file system.
The fact is that the FAT32 file system, unlike the more modern and reliable NTFS file system, can be read on almost any device with a USB port (car radio, refrigerator, TV, etc.). You may also need to format the flash drive to FAT32 when flashing the computer's BIOS.
Formatting via Windows GUI
The easiest way to format a flash drive to FAT32 is to do it directly in the Windows interface.
Insert the USB flash drive into your computer or laptop and click “My Computer” on the desktop. After that, right-click on the disk with the flash drive and select “Format”.
A formatting window will open. Here you need to select the FAT32 file system. The cluster size can be chosen as standard or, in our case, 8192 bytes.
In the “Volume Label” column, you can specify the name of the flash drive (for example, My Flash) or leave the field empty.
As a rule, people check the box next to “quick formatting (cleaning table of contents)”. In this mode, the flash drive will be formatted much faster. However, full formatting (when the checkbox is unchecked) will allow you to format the flash drive better.
After selecting all the options, click “Get Started.” The formatting process will start.
When finished, you will see a message that formatting is complete.
Formatting using the command line
To enter the Windows command line, click “Start” - “All Programs” - “Accessories” and select “Command Prompt” there. Or press the Win+R key combination, write cmd and click OK.
You should have a command prompt open.
Write the following line in it:
format /FS:FAT32 K: /q /V:My_Fleshka
In this line
/FS:FAT32 - specify formatting in FAT32
K: - letter of the flash drive (you can see it in “My Computer”)
/q - select quick formatting (to select full formatting, just do not write this command)
/V:My_Fleshka - volume name
Format a flash drive larger than 32 GB to FAT32
The FAT32 file system has a file size limit of 4 GB. If you need to write a file larger than 4 GB to a flash drive, then you should use the NTFS file system.
Also, the standard Windows formatting tools described above do not allow you to format a flash drive in FAT32 with a capacity of more than 32 GB. To do this, you should use a special program FAT32Format.
Launch the program. Select the desired flash drive and volume label.
For quick formatting, click the “quick format” checkbox; for complete formatting, uncheck the header.
Click "Start".
I also suggest you watch the training video on how to format a flash drive in FAT32.
If you have any questions, ask them in the comments, I will be happy to help everyone.
It is not difficult to change the file system of a memory card; there are three such parameters: FAT32, NTFS and exFAT. All of them are designed to be read on different devices and media. If you want to download any files to a flash drive and then watch them on your TV or other player, then most likely you will encounter problems with reading and recognition. The problem is not in your files or the reading device: the problem lies precisely in the file system, which can be changed manually on the computer. To do this, you do not have to download additional software, because all the necessary tools are already in Windows and ready to use. Find out how to format a flash drive in FAT32 format in this article.
How to format a flash drive up to 64 GB in FAT32
The capacity of your drive is important, since depending on this parameter the method of converting the file system will differ. You can try this method on a large flash drive with a capacity of more than 64 GB, but it’s not a guarantee that you will succeed.
Insert your flash drive into a computer or laptop running the Windows operating system. As soon as it is recognized, go to the “My Computer” section, where all drives and connected devices are displayed.
- Right-click on the memory card or flash drive, find the “Format” item and click on it.
- In this window you can configure all conversion parameters. The second line selects the file system.
- Set the value to “FAT32” and check the box next to the “Quick Format” line. All you have to do is click “Start” so that the flash drive is formatted and changes its file system. Please note that formatting involves completely deleting all files from your storage device. Otherwise, you won't be able to change the file system.
How to format a flash drive larger than 64 GB to FAT32
If you are unable to convert the file system, then use the Windows command line. This also applies to smaller flash drives, which have not changed since the first paragraph of the article.
- Press the combination Win + R or Win + k on your keyboard at the same time on the Russian layout. The execution window will open in front of you. Type the command “CMD” into it without quotes and press Enter.
- Command Prompt will open instantly in another window. You need to enter the following line into it: format/FS:FAT32 E:/q
- Please note that the letter “E” is the drive letter designation for your flash drive, which is assigned to all drives in Windows. Go to My Computer to check this letter, otherwise you are formatting the wrong partition.
- Press Enter and wait for the result.
- Using these methods, you can easily format a memory card or flash drive in FAT32, however, if something goes wrong, try using utilities. One of the simplest and most common is SDFormatter. You can download it on the official website or from your own sources.
class="eliadunit">
I bought a memory card with a capacity 64 GB format microSDXC from the manufacturer Silicon-power. It was intended for a tablet Lenovo Yoga Tablet 10 HD and sometimes on a plasma TV LG. I inserted the flash drive into the computer, formatted it in the default format in exFAT, downloaded the movie, inserted it into the TV (via a card reader), did not recognize it, inserted it into the tablet - a similar situation. The mood dropped, the excitement increased. I surfed the Internet on this topic and solved this problem.
Why is a 64 GB flash drive not recognized on TV and tablet?
It's all about the file system of the memory card. The listed devices happily read media with a file system FAT32. And my purchased, like the vast majority, 64 GB flash drives are formatted in Windows by default. NTFS or exFAT. Therefore, it is worth resorting to third-party programs. I made all further changes at my own peril and risk, in fact, just like you.
Step 1. High-quality formatting of a flash drive using the program SDFormatter by downloading on the official website .
There is no need to customize the program significantly: we leave everything by default. It is very important to double check the item Drive. Select exactly the partition that is assigned to the memory card. Otherwise, you can delete all the information from some partition of your hard drive. Next, we carry out high-quality formatting by pressing a button Format.
Step 2. The flash drive is completely formatted in the system exFAT32 and ready for the second step. To do this you will need a program guiformat .
class="eliadunit">
The settings are simple:
Drive– select our flash drive.
Allocation unit size– leave it at default (32768).
Volume label– name of the flash drive.
Quick Format– leave the checkbox (quick formatting).
Click Start. Formatting will go relatively quickly.
After the operations have been completed and information is recorded on the memory card, the flash drive is inserted into the tablet, and then into the TV. The results are positive everywhere, the films are running.
Disadvantages of using the FAT32 file system: the inability to write a file larger than 4 GB, the speed is slightly reduced compared to exFAT. IN
A few words about the durability of the flash drive after such manipulations: it has been working for about a month. If I don’t write anything, it means it’s working.
FAT32format is a program that allows you to quickly format any media: hard drive, SSD, flash drive, memory card into the FAT32 file system (from any other). This file system is quite popular, as almost any device supports it. The main disadvantages of FAT32 are considered to be a rather strict limitation on the size of the recorded file (up to 4 GB), as well as a noticeable loss of performance during fragmentation.
This program does not have a graphical shell and is a command line application. If you have never worked with such applications before, do not be alarmed! Working with FAT32format is very simple: in addition to selecting the disk to format, the application allows you to set the number of sectors in the cluster. The final command that must be entered into the command line to get started should look like this: fat32format -cY X, where X is the drive letter that should be formatted, and Y is the number of sectors in one cluster. Depending on the media size, the following Y values are recommended:
- volume less than 137 GB - 1;
- volume less than 274 GB - 2;
- volume less than 549 GB - 4;
- volume less than 1 TB - 8;
- volume more than 1 TB - 16
The maximum storage capacity supported by the program is 2 TB. If this is exceeded, it is recommended to use alternative solutions.
What advantages does FAT32format have over standard Windows formatting tools? There is only one thing, but it is very important - speed of work. When formatting particularly capacious drives, the program can save you up to several hours (it all depends on the performance of the PC). You can download and use FAT32format completely free of charge.
Key Features and Functions
- no graphical shell, the application runs from the command line;
- high speed of formatting media in FAT32;
- support for hard drives, SSDs, memory cards and flash drives;
- work with media up to 2 TB;
- ability to select the number of sectors in one cluster (parameter -c).
Good afternoon Instructions below.
A little explanation: Standard tools for formatting disks in the Microsoft Windows operating system do not offer formatting large flash drives and memory cards in FAT32. It is believed that FAT32 is outdated, but, nevertheless, it is FAT32 that can read the radios of many cars. To format to FAT32 we will use a very simple program from third-party developers.
We format a flash drive of any size in FAT32
1. Download and install the GUIFORMAT32 program( , checked for viruses and malware).
3.Select a flash drive from the list(if there is only one, it will be selected automatically).
4. Specify the desired name of the flash drive(this item is optional).
5. Click the "Start" button and wait for the process to complete.
Now your flash drive is formatted in FAT32, you can record music on it and listen to it in the car, there will be no more problems with reading such a flash drive in the radio. This method works for flash drives and memory cards of any size.
If the formatting process fails, then you need to check your flash drive or memory card for errors and actual size:
1. In order to check whether the actual size of the flash drive matches the stated size, use our instructions: .
2. In order to check a flash drive or memory card for errors, follow our instructions: .
If you have any questions or need clarification, please ask a question or leave a comment.