Receive MMS message. How to download mms on android

Today, to send media files, users mainly prefer to choose email or social networks, for example, Odnoklassniki, VKontakte and others. But, in principle, there are still people of the old school who still want to work with MMS rather than with e-mail. Why, you ask? There are hundreds of answers: email can be hacked, Mailbox it is difficult to register for individuals, it is very difficult to remember your address rather than someone else's, you constantly forget your password and much more. In this case, we decided to describe in detail how to set up MMS on your Android and what is needed for this!

In principle, the setup process is no different from previous generation devices, when we registered all the settings in manual mode or automatic. We will describe all the methods for the main mobile operators.

The article will contain the following operators:

Beeline;
Megaphone;
Tele 2.

Initially, you need to check whether the service is activated for your number at all or not, because in some regions, oddly enough, it is disabled for certain numbers. Call service center customer support of your operator. All calls are free!

At all, The easiest way is to call the same service center and ask the operator to send you the settings. IN in this case all transactions will be carried out in automatic mode, and for you correct operation MMS will only need to restart the device and take full advantage of this technology.

Usually the operator is told the phone model, after which the settings are sent and saved automatically. But it often happens that the user needs to do everything manually.

For Megafon

If you have a SIM card from Megafon, then you will need to use the instructions described in this subtitle!

Automatic setup. Send free message without text to number 5049. In a few minutes, a message will be automatically sent to your number with the necessary parameters specifically for your model. You need to save them and reboot your phone. After that, you can try sending MMS to your friends.

Manual setting. IN operating system On Android, go to “Settings”, select the “Wireless Networks” tab and then “Mobile Network”. Here you will need to click on the “Access Points” tab. Now carefully review what data must be filled in!

Please note that all submitted data must be filled out exactly as described above. Each entry is written in separate tab. You will see all these fields when you go to the “Access Points” item in the menu. Next, all you have to do is click the “Save” button, restart your phone and check the functionality of the MMS.

For Beeline

If you use a SIM card from Beeline, then you need to set up MMS based on the instructions in this subheading!

Automatic. Call the toll-free number 06741015, after which all MMS parameters will be automatically sent to you. They can be saved directly in the dialog menu after opening incoming SMS . Beeline also has the option to configure this technology using.

personal account

Manual.

Go to “Settings”, select the “Wireless Networks” tab and go to “Mobile Network”, click on “Access Points”. Here you will need to specify settings specifically for Beeline! They will be as follows:

For MTS If you use an MTS SIM card, then you need to perform the settings according to the instructions in this subheading. Automatic. You need to send an SMS message with empty content to service number

1234, after which within a few minutes the subscriber will receive a response SMS from the operator with the settings for his device. You need to save them and restart the phone, after which you can send MMS. Also available

MMS setup

using the “Internet Assistant”, where each user independently manages the options on their phone.

Manual. To manually configure, you need to go to “Settings”, then to “Wireless Networks”. Select “Mobile network” - “Access points” and enter the settings described below: Save all the specified parameters and reboot your phone. For Tele 2 Despite the fact that Tele 2 has not existed for so long, you can also configure MMS for it, as on a regular device with support

Manual setting. Java applications

, and on

In general, we can conclude that setting up MMC on Android is not difficult, regardless of which operator you use. Just keep in mind that sending one MMS costs about 7 rubles, and this is not very profitable, given the capabilities of modern technologies that allow you to send media files High Quality absolutely free.

In the operating room Android system do not forget to activate the mobile network, because... It may be disabled by default! Attention! If you do not activate the mobile network, then sending MMS will be impossible. To do this, go to the main menu “Settings” and select “Wireless Networks”. Click the “Mobile Network” tab and activate it.

Also in OS Android on the panel quick tabs You can enable data transfer with one click.

Today, to send media files, many users prefer to use e-mail, social networks, communication applications. However, there are still adherents old model sending photos and pictures using the MMS system. Setting up a smartphone is not fundamentally different from the method of setting up previous generation phones. Let's look at how to set up mms on Android using all available methods.

First of all, it is recommended to call your telecom operator and make sure that this service is active for specified number. It’s paradoxical, but numbers in some regions are deprived of the ability to send mms. Therefore, activating the mms system will be absolutely meaningless in this case.

It is recommended to call the operator and find out all the details for your number. If the service is available (the probability of which exceeds 95%), then the most in a simple way is a request for automatic MMS settings. The settings are sent to the requested number, saved, after which the user can send media messages.

Contact the operator, call exact model phone, since for each brand and series there are personal parameters, and order settings. Some Android models do not have an automatic configuration system, so the user will have to download the service manually. About this and we'll talk Further.

Setting up mobile Internet and MMS on the phone - algorithm:

We activate the mobile Internet through the telecom operator used. Please note that some Androids provide for the use of two SIM cards. Therefore, when activating the Internet, you must select a specific number;
Go to the smartphone menu by selecting the “settings” section;
We visit the window " wireless network", select the item "data transfer", activate this option;
After this, we return to the “wireless networks” menu, go to mobile networks and select an access point;
In this window, you must indicate the SIM card that you will use to send and open received messages;
Click on the selected SIM card; if, after clicking, two access points do not appear in front of you (one for the Internet and one for the MMS option), then you will have to add the access point yourself.

Please note that the data entered will be personal for each operator. There is no single universal system mms settings Let's look at what access points look like for different communication providers.

How to send MMS messages from Android - operator settings:

Megafon – to receive settings, you need to send a message to number 5049. You will receive an automatic package of parameters. The user needs to open and save the sent settings, and feel free to use the service. In case of manual setup, you need to enter the data indicated in the picture;
Beeline - for request automatic package you need to use the number 06741015. You can also set up the MMS option in the personal account section. Manual activation happens as follows;
MTS - automatic setup is available by calling 1234. Alternative option is to use the Internet assistant to configure. Manual activation looks like this;
Tele2 - automatic setup will be available after calling the operator. Manual activation is filled out like this.

This is important: setting up MMS is quite simple, regardless of which telecom operator you use. However, please note that the average cost of one message will be 7 rubles. It's much more profitable to use modern technologies free of charge.

In the vast majority of cases, during installation new SIM card the smartphone automatically receives MMS settings and mobile internet. But sometimes glitches may occur, resulting in the user having to manually set required parameters. In this article we will tell you how to set up MMS on Android.

To open MMS settings, you must perform the following steps:

Step 1. Launch the application Settings and select the section " SIM cards and mobile networks».

Step 2. Select SIM card, for which you need to configure MMC.

Step 3. Click the button Access points».

Step 4. Select an access point for MMS and in the next window, set the parameters necessary for correctly receiving and sending multimedia messages.

MMS access point settings vary depending on different operators mobile communications. To save your time, we have collected links to the appropriate MMS settings for gadgets under Android control largest providers in Russia and neighboring countries:

How to send MMS from Android

Previously (on push-button phones), to send an MMS, you had to select the appropriate option in the message menu. IN modern smartphones everything is much simpler: just attach, for example, a photograph to text message so that it is automatically converted to multimedia. This also works in reverse side– by deleting all multimedia files from the created MMS, you will turn it into an SMS message.

Conclusion

Setting up MMS on Android is very simple - just use this guide - and in a couple of minutes you will be able to send and receive multimedia messages on your smartphone.

Setting up MMS on Android may be required in two cases. The first of them is buying a new smartphone. The second is to reset existing settings to factory settings. In any case, you need to change the configuration so that this service works. This can be done in four ways:

Automatically.
With the help of a service center operator.
By manual entry required values.
Using the operator's regional website.

It is all these methods that will be discussed in detail within the framework of this material.

Automatic setup

Automatic setting up MMS on Android it happens with minimal human intervention - this is its main advantage. But the disadvantage is that it can only be done once - during the initial registration of the device in the mobile operator’s network. After this, everything is considered to be set up and there is no need to resend this data. Its order is as follows:

We install the SIM card into the corresponding slot of the smartphone and assemble it.
Turn on the device and, if necessary, enter the PIN code.
Once registration is completed, the search begins required values in the operator's database. After they are found, this information is sent to the gadget.
Next, the subscriber must accept the configuration profile and save it.

This completes the automatic configuration process. But the process of receiving and sending messages itself may be blocked. The activation procedure will be described further in the text.

Operator assistance

Unlike automatic, setting up MMS on Android with the help of a service center operator or by manual entry can be done many times - this is their plus. But on the other hand, in the process of their implementation you need to perform certain manipulations, which slightly complicates the configuration process. Each operator has a toll-free consultation number. For Beeline it is 0611, for MTS - 0890, for Megafon - 0550. Next, following the instructions from the autoinformer, you need to establish a connection with the operator and order required settings, which will then be sent to your smartphone. Then they need to be accepted and saved. It is recommended that after this operation full reboot device, that is, turn it off and on. In some cases, you may need to activate the service. To do this, when calling the operator, please turn on this service for this number. This completes the setup of MMS on Android with the help of a service center operator.

Manual input

It is not always possible to reach the service center, but you need to receive an MMS urgently. In this case necessary settings can be installed manually. To do this, go to the following address: "Applications"\"Settings"\"Networks"\"More"\"Mobile networks"\"APN". Then you need to enter the operator parameters - this is actually manual setting MMS on Android. Beeline, for example, requires the following parameters:

The profile name should be Beeline MMS.
The home page in this case is http://mms/.
Data transmission channel - GPRS.
Access point - mms.beeline.ru.
IP address - 192.168.094.023.
and the password are the same - beeline.

The remaining values remain unchanged. For MTS you need to enter the following data:

Profile name - MTS MMS center.
APN should be mms.mts.ru.
The login and password in this case are identical - mts.
Home page - http://mmsc.
IP address - 192.168.192.192.
Port - 8080 (some models may use 9201).

As in the previous case, we leave all other values unchanged. Settings MMS Megafon on Android requires the following values:

Profile name - megafon.
APN depends on tariff plan. Here you need to look at the documentation that came with the starter package.
The login and password in this case are identical - gdata.
Home page - http://mmsc:8002.
IP address - 10.10.10.10.
Port - 8080 (some models may use 9201).

We don’t touch everything else and leave it as is.

Another way...

Another way to obtain settings is to order them on the operator’s regional website. To do this, on a computer connected to the Internet, via search engine We find the page we need. Then select the smartphone model and enter the captcha and mobile number. Then click “Submit”. Within 5 minutes necessary information will be received. Save and install required profiles. If the requested information has not been received within 5 minutes, it is better to repeat the order on the same regional website of the mobile operator. It is also recommended to completely reboot the phone. After that, we send and receive MMS. There shouldn't be any problems. If something doesn't work, we look for the error. As practice shows, somewhere they did something wrong. You can delete the old profile and do everything again.

Results

This article described step by step what is possible on Android various operators. As can be seen from everything previously said, there is nothing complicated about this. Can cope with such a task without any problems happy owner new smartphone. Just follow all the directions and you shouldn't have any problems with this procedure.

The MMS function is supported by many modern models phones. The ability to send multimedia messages allows users mobile phones share with each other your impressions of a vacation, a walk, wish you a great mood along with a beautiful melody or an interesting picture. This function is now actively used by those subscribers who own older models. cell phones. Multimedia messages are also convenient when it is not possible to use more in modern ways information transfer - Wi-Fi and WhatsApp.

The question of how to set up MMS is asked by subscribers of all existing operators. The system for setting up the function of sending multimedia messages is approximately the same for all operators. To be sure that the feature will be available and you can use it, you must complete all possible settings, which include the following three steps:

Step 1 - you need to activate the service;
Step 2 - configure account;
Step 3 - Check your phone settings manually.

Let's look at the features of connecting to the service and setting up an account within each mobile network. Step 3, which includes setting up the device manually, will be considered separately - it does not depend on the operator.

Setting up MMS on Tele2

The question of how to set up MMS on Tele2 will be resolved after you select any of the methods listed below:

After execution necessary actions the service will be connected and account settings will be activated.

Setting up MMS on MTS

MTS users can also set up MMS automatically. In order to connect the service and activate the necessary settings, you need to choose the method that is most suitable and convenient for you:

Make a call to number 0876.
Send a free message with the text “MMS” to number 1234.
Dial command *111*18#.
Use an assistant.

The settings received in the SMS message must be saved on your device.

Setting up MMS on Beeline

The question of how to set up MMS on a phone whose operator is BeeLine can be solved in very simple and quick ways: The 1st method is to connect to a service called “Pack of three services”, which includes WAP/GPRS/MMS. You can do this by dialing *110*181# and the call key on your phone. This way you will connect the service and activate your account settings. Method 2 is to activate the service in your personal account.

Setting up MMS on Megafon

Megafon provided subscribers with ample opportunities to manage your phone settings.

Therefore, the question of how to set up MMS on a phone with a Megafon SIM card is not a problem. Choose the method that is most convenient for you:

Send an SMS with the number 3 to number 5049.
Use the self-government service *105#, where then send request 6 (Settings) - then 1 (Phone settings) - and 1 (MMS).
Order settings on the company website.

Setting up your phone manually

This step must be completed in order to no longer hesitate and be confident that multimedia messages will be sent from your phone without unnecessary snags. It consists of several actions:

In the phone menu, find the “Settings” tab (“Options”), then “Configuration”.
Check the MMS message configuration settings:

access point in Tele2 - mms.tele2.ru, in MTS - mms.mts.ru, in Beeline - mms.beeline.ru, in Megafon - mms;
username in MTS and Beeline is the name of the company in small with Latin letters, in Tele2 - absent, in Megafon - mms;
the password in MTS and Beeline is the same as in the username, in Tele2 it is missing, in Megafon it is mms;
authentication type - select “normal”.

Further actions:

Enable the new account as the default account.
Reboot your device.
To register your number on the network as an MMS user, you need to send a multimedia message to your phone after turning on the phone

Setting up MMS on iPhone

The question of how to set up MMS on iPhone can be resolved by performing several manual steps.

1. Order a service:

MegaFon operator - send an SMS with the text “gprs” to number 000890;
Beeline operator - call 067409181;
MTS operator - send an SMS with the text “GPRS ON” to short number 0016;
Tele2 operator - make a call to toll free number 693.

2. Connect the device to a PC that has Internet access and is running iTunes app. Agree with the offer “Download updated settings" If there is no offer, it means that the service is configured or is not supported by the operator.

3. In the phone menu, open the “Settings” tab, then go to “General”, select “Network”, go to the “Cellular Network” menu.

Enter the required values:

Access point (APN): MTS operator - mms.mts.ru, Beeline - mms.beeline.ru, Tele2 - mms.tele2.ru, Megafon - mms.
The username in Beeline and MTS is the company name in small Latin letters; in Megafon and Tele2 it is absent.
Password - similar to username.
MMSC: Tele2 operator - http://mmsc:tele2.ru, Beeline, MTS, Megafon.
MMS proxy: Beeline operator - 192.168.94.23:8080, Megafon - 10.10.10.10:8080, MTS - 192.168.192.192:8080, Tele2 - 193.12.40.65:8080.
The maximum size is 512000.

The MMS setup on your device is now complete. Enjoy the service!